Page 1
USER MANUAL
Installation and Programming
Model: IP39-80
v. 2.1
www.transtel.co
Page 2
Notification is hereby given that Auto Telecom Company reserves the right to modify,
change, update or revise this document from time to time as required without the prior
obligation to notify any person, company or organization. Further, Auto Telecom Company
makes no warranty or representation, either express or implied, with respect to
merchantability, or fitness of its products for a particular purpose.
© 2017 Auto Telecom Company
This document or any parts thereof are not to be reproduced or transmitted in any form or
by any means, electronic or mechanical, including photocopying, recording, or information
storage and retrieval systems for any purpose whatsoever without the express written
permission of Auto Telecom Company.
Page 3
IP39-80 NGT USER MANUAL ..................................................................................... 1
1. Installation for Stand ............................................................................................ 1
2. Installation for Tablet ............................................................................................ 2
3. Un-Installation for Tablet ...................................................................................... 3
4. Un-Installation for Stand ....................................................................................... 3
5. Top View & Description ......................................................................................... 4
6. Rear View & Description ....................................................................................... 6
7. Operation for IP39-80 ........................................................................................... 7
7.1 Making Calls ..................................................................................................... 7
7.1.1 Dialing a Number ..................................................................................... 7
7.1.2 DSS Direct Dial ......................................................................................... 7
7.1.3 Last Number Redial .................................................................................. 7
7.2 Receiving Calls .................................................................................................. 7
7.2.1 Answer..................................................................................................... 7
7.2.2 Call Pickup ............................................................................................... 8
7.3 Hold & Call Transfer .......................................................................................... 8
7.3.1 Hold & Retrieve Held Call ......................................................................... 8
7.3.2 Call Transfer ............................................................................................. 8
7.4 During Conversation ......................................................................................... 9
7.4.1 Mute ........................................................................................................ 9
7.4.2 Handset & Handsfree Modes Switch ........................................................ 9
7.4.3 Volume Adjustment ................................................................................. 9
7.4.4 Three-way Conference ........................................................................... 10
IP39-80 NGT PROGRAMMING MANUAL ............................................................................. 11
Page 4
www.transtel.co
IP39-80 NGT User Manual
1. Installation for Stand
1
Page 5
www.transtel.co
2. Installation for Tablet
2
Page 6
www.transtel.co
3. Un-Installation for Tablet
4. Un-Installation for Stand
3
Page 7
www.transtel.co
Back
Home
Recents
Sleep / Wake
Massage (Access the voice mailbox in the PBX)
Call history
DND, Activate or deactivate the “Do Not Disturb” function
Mute/MIC, Turn the microphone On or Off of the Handsfree or Handset
Redial the previously dialed numbers
Conference, Operate the “Conference” function (works for IP-PBX)
5. Top View & Description
Function Keys:
4
Page 8
www.transtel.co
Volume Down, Turn down the volume
Volume Up, Turn up the volume
SPK, Activate or deactivate the dialing function. Answer the call without
lifting the handset.
Hold, Put the current call on hold
TRF, During a call, this key offers the “Transfer” function
.
.
.
5
Page 9
www.transtel.co
6. Rear View & Description
1. External power supply 5VDC 3A input (if no POE applied)
2. POE/LAN connection
3. PC Port
4. USB port
5. USB port
6. Headset Jack
7. Push to remove tablet from docking
8. Hardware Reset
9. Volume Down/Up
10. Power key
11. Camera
12. Earphone
13. Micro SD
14. Speaker
15. HDMI output
6
Page 10
www.transtel.co
7. Operation for IP39-80
7.1 Making a Call
7.1.1 Dialing a Number
To make a call by dialing the number on the Dial Keypad:
(1) Lift the handset or press the [SPK] key, the dial tone will be heard.
(2) Dial the telephone number.
(3) Press the [ # ] key to send out the telephone number immediately, or
wait for a few seconds.
7.1.2 DSS Direct Dial
The DSS feature of the IP39-80 must be set up before the user can use it.
The [DSS/BLF] buttons indicates the status of the assigned stations (online,
offline, busy, or idle). The user can call that station by simply pressing the
respective [DSS/BLF] button.
7.1.3 Last Number Redial
The IP39-80 automatically stores the last dialed number.
To call that number again, follow the steps below:
(1) Lift the handset or press the [SPK] key, and wait for the dial tone.
(2) Press the [Redial] key to call the last dialed number.
7.2 Receiving Calls
7.2.1 Answer
When the IP39-80 is ringing, the user can answer the call.
(1) Picking up the handset to answer the call directly.
(2) Or press the [SPK] key to answer the call in Handsfree mode.
7
Page 11
www.transtel.co
7.2.2 Call Pickup
This feature allows a user to answer a call ringing at another station. As
extensions are assigned into different groups, Call Pickup can be done in two
different ways:
■ Pick up a call in the same group:
(1) Lift the handset or press the [SPK] key.
(2) Dial [＊ 0 ] to answer for another station.
■ Pick up a call in other groups:
(1) Lift the handset or press the [SPK] key.
(2) Dial [＊ 9 ], then
(3) Dial the [group code] (01 to xx) to pickup a call.
7.3 Hold & Call Transfer
7.3.1 Hold & Retrieve Held Call
(1) Press the [HOLD] key while on a call to hold the call. The held
caller will hear music from the PBX.
(2) Press the [HOLD] key again to retrieve the held call.
(3) To hang up the handset when a call is on hold, the user can dial
numbers to reconnect the held caller.
7.3.2 Call Transfer
(1) Press the [HOLD] key on a call to hold the call. The held caller will
hear music from the PBX.
(2) Dial the extension number of the transfer destination to make a call to
it.
(3) Ring back tone heard and waiting for answering, the user can:
A. Wait until answered, claim the transference, and then press the
8
Page 12
www.transtel.co
Red light steadily on:
The microphone is muted.
Red light off:
The microphone is working properly.
transference is declined, the user can press the [HOLD] key
to resume conversation with the held caller. Or…
B. Press the [TRF/FL] key or On hook to immediately transfer
the call.
7.4 During Conversation
7.4.1 Mute
When having conversation via the handset or in Handsfree mode, the user
can press the [MIC] key to activate or deactivate this feature. The status
[TRF/FL] key or On hook to transfer the call. If the
of the LED light will also change as follows:
7.4.2 Handset & Handsfree Modes Switch
(1) When talking on the handset, press the [SPK] key to have its
LED light On steadily, and then hang up the handset to switch to
Handsfree mode.
(2) When talking in Handsfree mode, lift the handset to switch to handset
for talking. The LED light of the [SPK] key goes off.
7.4.3 Volume Adjustment
When talking on the handset or Handsfree mode, pressing the [Down]
key will turn down the volume of the speaker (on the handset or on the
phone), while pressing the [Up] key will turn up the volume.
9
Page 13
www.transtel.co
7.4.4 Three-way Conference
(1) Establish a call with party A. Press the [ Hold ] key to place party A
on hold.
(2) Establish a call with party B, and press [ CNF] key. Party A, B
and the caller are now in a three-way conference.
(3) Hang up the phone to end the conference.
10
Page 14
www.transtel.co
IP39-80 NGT Programming Manual
You have to set your SIP account like username, password and domain/IP
address then Apply for first time NGT app running.
11
Page 15
www.transtel.co
Press then to change more parameters of SIP setting. Press
Exit after finished.
Press [Account] then choice account you want to setup.
12
Page 16
www.transtel.co
Press [Audio] then choice Echo cancellation to Enable or Disable echo cancel
function.
Press [Audio] then choice Echo cancellation calibration for echo cancellation
testing.
Press [Audio] then choice Codecs for more setting of codec.
13
Page 17
www.transtel.co
Press [Video] then Enable or Disable functions of video by choosing Video
Initiate video calls / Accept incoming video requests
Press [Video] then choice codec for video supported
14
Page 18
www.transtel.co
Press [Video] then choice Preferred video size for video size selected (720p is
not recommended).
Press [Advance] then choice Call to select DTMF relay mode for SIP INFO
15
Page 19
www.transtel.co
Press [Advance] then choice Network. They are 9 Item and listed as follows:
Example for Stun server setting, SIP register port setting…..
16
Page 20
www.transtel.co
Choice [Media encryption] if SRTP feature is requested.
17
Page 21
www.transtel.co
Press [Advance] then choice Other. They are 3 Item in list below.
Press [Pickup Setup] for Pickup code setting (‘*9’ is an example when
IP39-80 registered on GDS).
18
Page 22
www.transtel.co
Press [Blf Type] for Blf type select.
Press [Voice Mail] for voice mail access code setting. (‘86’ is an example
when IP39-80 registered on GDS)
19
Page 23
www.transtel.co
Press [Camera Website] to define RTSP path (URL) of their IP camera.
Example: Setting of IP394x is “rtsp:192.10.1.126:8554/ip-394x”.
20
Page 24
www.transtel.co
To view IP camera by pressing then .
Press [Open Door Code] for door open code setting of IP39-4x.
Press [Call Service] setting of IP3980 that works for normal sip server or GDS
G2-ISUN.
21
Page 25
www.transtel.co
Press [Phone Lock] then [Password] for phone un-locked password setting.
Note: Remember password, otherwise NGT is unable to operate.
22
Page 26
www.transtel.co
To enable by pressing then and password requested before
operation.
Note: Remember password, otherwise NGT is unable to operate.
23
Page 27
www.transtel.co
IP39-80 APP
Press to enter or exit Contact Manage setting.
Press to add
24
Page 28
www.transtel.co
24 DSS keys setting: press DSS key and hold for 2 seconds. Press [Apply]
after finished.
Press to hide or show keypad.
Keypad is hidden.
25
Page 29
www.transtel.co
Calls is dialing by pressing DSS or dialing number from keypad then
Video connecting if called party video supported.
26
Page 30
www.transtel.co
Calls incoming, press to answer or to reject.
If calls missed: History icon in RED , press to view. Press again to go
back.
27
Page 31
www.transtel.co
Status of History: outgoing , incoming , missed call
28
Page 32
www.transtel.co
Choices calls to manage:
Press + to add calls to contact manage.
Press X to delete a call.
Press to answer a call.
Press [Missed Call] to view all missed calls.
29
Page 33
www.transtel.co
Press to Enable or Disable Do not Disturb. Do not Disturb is on.
30
Page 34
AUTO TELECOM COMPANY
www.transtel.co
www.hybrex.com
Loading...