Transtek Medical Electronics LS901 E Users manual

version 1.0

print date: 8/2012

Digital Tape Meter LS502-E

Device structure Before using

1. Install the data bridge. Please refer to the data bridge instruction
manual. (If data bridge is already installed, skip these steps.)

2. Register for an account at www.profileplan.net and click
"Create Account". Follow the instructions on screen.

Measure key Body measurements

Select key

Power button

Coupling

Tape

Battery cover

Wireless transmit

Data store

User

Measurement

Internet disconnection

Low battery indicator

Measure value

1 2

Register device

1. Log into your account at www.profileplan.net and
choose "My Account" > "Devices."

2. Enter your device’s serial number & click "Add Device."

3. If successful, the device will display as "Active."

4. See "Activate the Product" on the following pages if
device does not display as synced.

3 4

Install batteries

Activate the device

1. Bring the device within 3 feet of the data bridge.

Slide off the battery cover

according to the arrow direction.

Replace the battery cover.

Install 2 AA batteries according to the

marks in the battery compartment.

2. Press the power button for 5 seconds.

5 6