Zone A, No.105 ,Dongli Road, Torch Development District,
Zhongshan,528437,Guangdong,China
TEL:86-760-88282982 www.transtek.cn
Thank you very much for selecting the Transtek Activity Tracker LS410-B.
Please do read the user manual carefully and thoroughly so as to ensure
the safe usage of this product, and keep the manual well for further
reference in case you have problems.
Table of Contents
Table of Contents
Symbol Meaning
Symbol Meaning
Overview
General Instructions
Device Components
Initial Start-Up
Installing and Replacing the Battery
Install the APP and Pair up
How to Wear the Activity Tracker
Start Measuring
How to Light it up
How to Use
View the Data
Recall the Data on the APP10......................................................................................................
Recall the Data on Activity Tracker
Specifications
Maintenance
Warranty
Warning
Activity Tracker Care
Health Disclaimer
Other Notes
FCC Statement
The warning signs and symbols are essential to ensure your correct and safe use
of this product and protect you and others from injury. Please kindly find the
meanings of the warning signs and symbols, which you may encounter in the label
and user manual, as follows:
Caution: These notes must be
observed to prevent any damage
to the device.
Symbol for “DIRECT CURRENT”
The Bluetooth Combination Mark
Symbol for “COMPLIES WITH EU
REQUIREMENTS”
Symbol for “MANUFACTURER”
Symbol for “ENVIRONMENT
PROTECTION – Waste electrical
products should not be disposed of with
household waste. Please recycle where
facilities exist. Check with your local
authority or retailer for recycling advice”
General Instructions
Transtek Activity Tracker LS410-B is designed to measure the walked steps, walked
distance and the burned calories.It also can display the time.
This device has Bluetooth 4.0 technology, the user can set the personal
information,such as height, weight, etc,through the bluetooth device. And then
download the information to Activity Tracker. The data in the Activity Tracker also can
be uploaded to the device which supports the Bluetooth 4.0 technology. So the user
can check it at anytime.
Main Features:
a. support the Bluetooth 4.0 technology
b. 12 pcs yellow LED display the time and completed amount of the goal, 1 pcs red
LED indicate low battery
c. keep a record of the measuring data during 7 days
d. can connect with the app, set the daily goal steps, and keep a record of steps,
walked distance and burned calories through the APP.
e. track the quality of sleeping (this function can be set on the app,and will be
judged by the APP server. If the app doesn’t has sleep module, this function won’t be
shown on the Activity Tracker.)
Device Components
12 o’clock direction indicator light
LED lights
(Indicate the time or the
completed amount of the goal)
Screwdriver
Wrist Band
List
1. Activity Tracker LS410-B
2. One CR2032 battery
3. One Screwdriver
4. User Manual
23
Installing and Replacing the Battery
Initial Start-UpInitial Start-Up
When you use the Activity Tracker for the first time, please install the battery
(1×CR2032) first.
• Insert the matched screwdriver into the notch of the main unit, use it to pry the
bottom case of the Activity Tracker open.
Bottom case
• Install the battery by matching the correct polarity, as shown. (Always select the
authorized / specified battery : One CR2032 Lithium Battery)
• Close the bottom case. Buckle the place which the bottom case marking “12”
and the place which the top case marking “12”.
12
FCC ID:OU9LS410-B01
TRANSTEK
Activity Tracker
LS410-B
Rating : 1xCR2032,3V
Made in China
“12” marked in the label
of the top case
“12” marked in the
bottom case
Buckle the top case
and the bottom case
Replace the batteries whenever the below happen
The red LED light blinks
The LED display does not light up
CAUTION
Remove the battery if the device is not likely to be used for some time.
The old battery is harmful to the environment, do not dispose with other daily trash.
Remove the old battery from the device and follow your local recycling guidelines.
The bottom case
4
Do not dispose of battery in fire. Battery may explode or leak.
5
Initial Start-UpInitial Start-Up
Install the APP and Pair up
Before you use the smartphone which supports Bluetooth 4.0 technology, please
turn on the Bluetooth.
Download the TransHealth app from APP Store or Google Play.
Install the APP, and register an account. Then set your personal information
(Name, Gender, Birthday,Height and weight).
Enter the Device interface to add the device. Click “Add Device or +” to add it .
Select the QR code scanner icon, use the smartphone to scan the special QR code
which is located on the card for the activity tracker to bind the device, it will
synchronize with your smartphone.
The time on Activity Tracker will synchronize with the time on your smartphone.
The measuring data will be transmitted to your device which supports Bluetooth 4.0
technology through the Bluetooth. Open the home page of the APP to check the
steps you have walked, the walked distance, burned calorie,and healthy diagram.
How to Wear the Activity Tracker
Assemble the main unit into the wristband. Wear the Activity Tracker on the wrist.
Make sure the “12 o’clock direction indicator light” must be towards the outer part of
the wrist. Choose the suitable length and buckle the button into the corresponding
hole tightly.
6
7
Start Measuring
Start Measuring
How to Light it up
If the Activity Tracker detect the action of watching, the LED will
light up automatically, indicating the Activity Tracker is on. There
are two ways to light it up.
The first way:
The top case is towards
outside, rotate your hand
towards inside between 30°
and 80° to watch normally, the
Activity Tracker will light up.
The second way:
Swing the hand from the
vertical posture to the position of
watching the watch normally,the
surface angle is between 30°
and 80°, the Activity Tracker
will light up.
How to Use
Wear the Activity Tracker and start walking.
Turn on the home page of the APP, the data will be transmitted through Bluetooth
automatically in the range of 3 meters.
8
9
SpecificationsView the Data
Recall the Data on the APP
Recall the data on the home page of the APP. You can check
the steps and distance you have walked, calories burned,and the
healthy diagram.
Recall the Data on Activity Tracker
Check the time on Activity Tracker. When the Activity Tracker
detect the action of watching, it will turn on and display the current
time and completion of walking steps.
Display the current time. The light which keeps lighting indicates
the hour hand. The blinking light indicates the minute hand. Only
one light lights and blinks means the hour hand overlaps the
minute hand. Such as 12:00, 1:05, 2:10,and so on.
The minute hand
indicates “12” blinks
The hour hand
indicates “9”
keeps lighting
09:0012:00
Check the steps on Activity Tracker. The lighting lights indicate
the completion of walking steps.
25%
Three lights light,
indicate you have
finished 25% of
the goal steps.
50%100%
Six lights light,
indicate you have
finished 50% of
the goal steps.
Only one light
lights and blinks
All the lights light,
indicate you have
reached the goal
steps.
125%
When it’s over the
goal steps (100%),
the lights of excess
part will blink.
Specifications
Product Name
Dimension
Net WeightApprox. 17 g ( including the wristband)
Display12 LED lights display
Steps0-120000 steps, division 1 step
Calories
Distance60.0km
Exercise Time0-23 hours and 59 minutes, division 1 minute
Step Accuary
Power Source3V,CR2032 Lithium Battery
Working Environment
Storage Environment
Accessories
Protection against
ingress of water
About the Accuracy of This Product
This product passes strict inspection before delivery and therefore its accuracy is guaranteed by the
manufacturer. Please refer to the above table for the descriptions on accuracy.
WARNING: No modification of this equipment is allowed.
Activity Tracker (LS410-B)
Whole size: φ 28.7mmx9.0 mm (Approx.)
0-12000.0 kcal, division 0.1 kcal
500±15 steps
Temperature: 0℃ to 40℃
Relative Humidity: ≤90% RH
Atmospheric Pressure: 80 kPa ~ 106 kPa
Temperature: -20℃ to 60℃
Relative Humidity: ≤90% RH
Atmospheric Pressure: 50 kPa ~ 106 kPa
1. One CR2032 Battery
2. One Screwdriver
3. User Manual
IP65
10
11
Maintenance
Warning
Maintenance
When carrying out usual maintenance, please ensure practice of the following Do’s and
Don’ts:
DO use a dry soft cloth to wipe the dust.
DO use a wet soft cloth, dipped into water and wrung out, to wipe the dirt. Then use a
dry soft cloth to dry up the device.
DON’T wash the device with water or immerse it in water.
DON’T use propellant, abrasive or other chemicals to wipe the dirt in avoidance of
discolor or malfunction.
DON’T disassemble this device. If you have any problems, please contact Transtek.
(Please refer to Warranty for contact information)
Warranty
Transtek warrants its products free of defects in materials and workmanship in normal
use for a period of TWO years from the date of retail purchase.
This warranty does NOT cover damages caused by misuse or abuse, including but not
limited to:
Failure caused by unauthorized repairs or modifications;
Damage caused by shock or drop during transportation;
Failure caused by improper operation inconsistent with the instructions stated in this user
manual;
Malfunction or damage from failure to provide the recommended maintenance;
Damage caused by improper use of power supply.
Should this device require maintenance (or replacement at our option) under warranty,
please deliver the original package to GUANGDONG TRANSTEK MEDICAL
ELECTRONICS CO., LTD prepaid. Please return the store receipt (with the retail
purchase date) and a note with reasons to return on it as well.
Warning
While your activity tracker is designed to be worn 24/7, its components are
electronic and susceptible to damage if used improperly. Please read the safety
guidelines on the following pages to ensure proper use and care.
Activity Tracker Care
• Do not tamper with or abuse the activity tracker. For example, without limitation,
do not drop, disassemble, open, crush, excessively bend, deform, puncture, shred,
microwave, incinerate, paint, or insert foreign objects into the activity tracker.
• Do not use abrasive cleaners to clean your activity tracker.
• Do not expose your activity tracker to extremely high or low temperatures.
• Do not leave your activity tracker near open flames such as cooking burners,
candles, or fireplaces.
• Do not bring your activity tracker into contact with any sharp objects. This could
cause scratches and damage.
• Do not insert anything into your activity tracker unless otherwise specified in the
user instructions. This may damage the internal components.
• Do not attempt to repair, modify, or disassemble your activity tracker; it does not
contain any user-serviceable components.
Health Disclaimer
WARNING: THIS ACTIVITY TRACKER IS NOT A MEDICAL DEVICE. The activity
tracker and its associated applications should not be used to diagnose, treat, or
prevent any disease or medical condition. Always seek the advice of a qualified
medical professional before making any changes to your exercise, sleep or
nutrition, as doing so may cause severe harm or death.
Guangdong Transtek Medical Electronics Co., Ltd.
Zone A, No.105 ,Dongli Road, Torch Development District,
Zhongshan,528437,Guangdong,China
• Dispose of the activity tracker, the activity tracker’s battery in accordance with
local regulations. Do not dispose of the battery with regular household waste.
• Recycle your package in accordance with local regulations.
13
FCC Statement
FCC Statement
FCC ID: OU9LS410-B01
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
• Caution: The user is cautioned that changes or modifications not expressly approved
by the party responsible for compliance could void the user's authority to operate the
equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation.
• If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
• This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment.
• This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
14
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.