Transonic TC1883DV Instruction Manual

2.0 Channel

DVD/CD/MP3 Player

Instruction Manual

Model TC1883DV

Please read these instructions carefully and retain for future reference.

For assistance during normal working hours (9am-5pm, Mon-Fri) call Oriental Pacific International Ltd.

NZ call: 0800 89 85 80 or email: [e-mail]

1

When using any electrical apparatus always observe safety regulations and use

basic safety precautions to reduce the risk of fire, electric shock and personal

injury, including the following

Read, Keep and Follow these instructions, heeding all Warnings.

CAUTION! This is a class 1 laser product. However this player uses a visible laser beam which

could cause hazardous radiation exposure if directed. Be sure to operate the equipment as
directed. Do not place eyes close to any openings when connected to the mains supply.

WARNING! Do not remove any cover.
WARNING! No objects filled with liquid, such as vases, shall be placed on this equipment or in any

position where liquid may fall into this equipment or any other electrical apparatus.
WARNING! Do not insert any objects into any openings of this equipment or any other electrical
apparatus.
WARNING! Do not use this apparatus near water. To avoid the risk of fire or electric shock, do not
expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or
splashes and is strictly for indoor use only. WARNING! Not for use in Tropical humid climates.

WARNING! Do not immerse in any liquid whilst in use or cleaning. Clean only with a damp cloth,
dry with a dry towel. Do not use harsh abrasives as these may damage the plastic parts.
WARNING! DO NOT block any ventilation openings. Keep away from curtains, newspapers and

restricted areas. Install in accordance with any specific manufacturer’s instructions. Always allow a
sufficient gap around the apparatus to avoid overheating.
WARNING! Do not install near any heat sources such as radiators, gas heaters, stoves or other

apparatus (including amplifiers) that produce heat. Do not leave in direct sunlight.
WARNING! Do not place any naked flame source, such as lighted candles on any electrical
apparatus.
WARNING! Connect to a suitable 230-240 ~ 50 Hz power supply only. This equipment must be
connected to a mains socket with a protective earth connection suitable for class 1 equipment.
WARNING! Keep out of reach of young children. This apparatus is not suitable for use by young

children or infirm persons without supervision. Young children must be supervised to ensure that
they do not play with the apparatus. Ensure young children have enough knowledge to operate the
equipment safely if they do have access to this equipment.
WARNING! Do not abuse or damage a power cord. If any power cord is damaged, it must be
replaced by the manufacturer, its service agent or a similarly qualified person in order to avoid a
hazard. A replaceable cord must be replaced with an authorised replacement from an authorised
service agent only.

WARNING! Only use attachments/accessories specified by the manufacturer.
WARNING! Unplug completely from the power source this apparatus during lightening storms or

when unused for long periods of time.

WARNING! Attention is drawn to the environmental aspects of disposing of any battery.
WARNING! Refer all servicing to qualified personnel. Servicing is required when the apparatus

has been damaged in any way, such as when the power supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been dropped.

WARNING! For household use only, this apparatus is not intended for commercial use.

1.0

Important Safety Instructions

2

WARNING! If this apparatus is to be used by a third party, please supply these instructions with it.

WARNING! No liability will be accepted for any personal injury or damage caused by failure
to follow these instructions.

This product incorporates copyright protection technology that is protected by U S patent
rights. Use of this copyright protection technology must be authorised by the Macrovision,
and is intended for home and other limited viewing use only unless otherwise authorised by
Macrovision. Reverse engineering or disassembly is prohibited.

Manufactured under licence from Dolby Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
Confidential Unpublished Works, 1992-1997 Dolby Laboratories. Inc. All rights reserved.

Content Guide Page

1.0 Important safety information 1

2.0 Quick start guide 3

2.1 Basic Connection 3

2.2 Playing a DVD 4

2.3 Frequently Used Remote Buttons 4

3.0 Remote Control 5

3.1 Remote Control Buttons 5

3.2 Remote Button Descriptions 6

4.0 Front & Rear Buttons 7

4.1 Front Panel 7

4.2 Rear Panel 7

5.0 Connection Options 8

5.1 Component & Composite Video System Connections 8

5.2 S-Video System Connections 9

6.0 Setup Menu 10

6.1 Menu Operation & Navigation 10

6.2 Language Setup Page 10

6.3 Screen Setup Page 10

6.4 Audio Setup Page 11

6.5 Custom Setup Page 11

7.0 Trouble Shooting 12

8.0 Specifications 13
Warranty Card 14

1.0

Important Safety Instructions (Continued)

Contents

3

2.1 Basic Connection

Unpacking: You should have 1 DVD – 1 Remote – 1 Set Batteries – 1 set AV Connection Leads.

Basic Connection: Using AV cables (Yellow, Red & White plugged cables)

DVD Connections: Connect the Yellow plug to the Yellow Video output jack

Connect the Red plug to the Red R (Audio Right) output jack
Connect the White plug to the White L (Audio Left) output jack

TV Connections: Connect the Yellow plug to the Video IN jack on your TV
Connect the Red plug to the Audio IN (Right) jack
Connect the White plug to the Audio IN (Left) jack

Power Connections: Connect the supply plug into a suitable power outlet socket. This equipment

must be plugged into a standard 3 pin earthed outlet suitable for class 1

equipment.

You now have basic AV connection. Turn on your TV & DVD Player and switch the TV channel to
AV to view the DVD screen. You should see the start-up Transonic logo.

2.0

Quick Start Guide

4

2.2 Playing a DVD

Turn on the TV & DVD player. Switch the TV to the AV channel. You should see the Transonic
start-up logo.

1. Press the OPEN/CLOSE button on the DVD Remote (or on the unit itself)

2. Insert a disc label side up

3. Press the OPEN/CLOSE button once more
The DVD player will start loading the disc.
Once at the main menu, follow the on screen instructions to start playing the movie.
Use the directional keys to select the appropriate items and press the Enter key to confirm
highlighted items on the menu screen.

2.3 Frequently Used Remote Buttons

POWER: Press to turn ON and press again to turn the DVD player to standby mode
OPEN/CLOSE: Press to open / close the disc tray
SUBTITLE: Press to turn ON / OFF subtitles and change subtitle language (if available)
MENU: Press to return to the DVD main menu
DIRECTIONAL BUTTONS: Press to navigate through menus on screen when in menu screens
ENTER: Press to select highlighted items in on screen menus, i.e. to play movie
PLAY / PAUSE: Press once to play a track or DVD, press again to pause, press once more to

resume normal play

FAST BACKWARD: Press to rewind the track or movie
STOP: Press to stop play
FAST FORWARD: Press to fast-forward a track or movie
PREVIOUS: Press to skip to the previous track or the previous chapter on a DVD
NEXT: Press to skip to the next track or the next chapter on a DVD (note: some DVD discs will not

allow you to skip chapters forwards or backwards)

2.0

Quick Start Guide (continued)