Transition Networks TN-SFP-LX3, TN-SFP-LX1, TN-SFP-LX5, TN-SFP-LX8, TN-SFP-SX User Manual

...

Page 1

User’s Guide

TN-SFP-xxx

Small Form Factor Pluggable (SFP) Transceiver Modules

The Transition Networks TN-SFP-xxx series small form factor pluggable (SFP) transceiver modules are designed to install in any SFP port, connect multimode 1000Base-SX or single mode

1000Base-LX fiber-optic cable to the network through the SFP connector. The TN-SFP-xxx transceivers are designed for bidirectional serial-optical data communications such as Gigabit Ethernet or fiber channel at speeds up to 1.25 Gbps.

*Unless otherwise indicated, the distances listed are the typical maximum cable distance. The actual maximum cable distances are dependent upon the physical characteristics of the network installation.

Part Number Duplex Fiber-Optic Port

TN-SFP-SX

LC, 1000Base-SX, 850 nm multimode, 220 m (722 ft)* on 62.5/125 µm fiber, 550 m (1840 ft)* on 50/125 µm fiber

TN-SFP-SXD

LC, 1000Base-SX, 850 nm multimode with DMI management, 220 m (722 ft)* on 62.5/125 µm fiber 550 m (1840 ft)* on 50/125 µm fiber

TN-SFP-ESX5

LC, 1000Base-SX, 1310 nm multimode extended with DMI management, 2 km (1.2 miles)* 50/125µm fiber

TN-SFP-ESX6

LC, 1000Base-SX, 1310 nm multimode extended with DMI management, 2 km (1.2 miles)* 62.5/125µm fiber

TN-SFP-ELX1

LC, 1000Base-LX, 1310 nm single mode 10 km (6.2 miles)*

TN-SFP-LX1

LC, 1000Base-LX, 1310 nm single mode with DMI management, 10 km (6.2 miles)*

TN-SFP-LX3

LC, 1000Base-LX, 1310 nm single mode with DMI management, 30 km (18.8 miles)*

TN-SFP-LX5

LC, 1000Base-LX, 1550 nm single mode with DMI management, 50 km (31.2 miles)*

TN-SFP-LX8

LC, 1000Base-LX, 1550 nm single mode with DMI management, 80 km (50.0 miles)*

Installation . . . . . . . . . . . . . . . . . . .3

Operation . . . . . . . . . . . . . . . . . . .8

Diagnostic Monitoring Interface

(DMI) . . . . . . . . . . . . . . . . . . . . . . .4

Cable Specifications . . . . . . . . . . . .5

Technical Specifications . . . . . . . . .8

Declaration of Conformity . . . . .10

Compliance Information . . . . . . .11

Page 2

TN-SFP-xxx

Tech Support: 1-800-260-1312 -- International: 00-1-952-941-7600—24 hours

Part Number Duplex Fiber-Optic Port

TN-SFP-LX12

LC, 1000Base-LX, 1550 nm single mode with DMI management, 120 km (74.6 miles)*

TN-SFP-LXl6 LC, 1000Base-LX, 1550 nm single mode with DMI management,

160km (99.4 miles)*

TN-SFP-OC3M

LC, 100Base-FX/OC-3 1300 nm multimode 2km (1.2 miles)*

TN-SFP-OC3S

LC, 100Base-FX/OC-3 1310 nm single mode 20km (12.4 miles)*

TN-SFP-OC3S3

LC, 100Base-FX/OC-3 1310 nm single mode 30km (18.6 miles)*

TN-SFP-OC3S8

LC, 100Base-FX/OC-3 SFP 1550 nm single mode with DMI management, 80km (50 miles)*

TN-SFP-OC12M

LC, OC-12/STM-4 SFP 1300 nm multimode 1 km (0.6 miles)*

TN-SFP-OC12S

LC, OC-12/STM-4 SFP 1310 nm single mode 20 km (12.4 miles)*

TN-SFP-FC2XM

LC, FC 2x/1x/OC-48/STM-16/1000Base-SX, 850 nm multimode, with DMI management150 m (492 ft)* on 62.5/125 µm fiber, 300 m (984ft)* on 50/125 µm fiber

TN-SFP-FC2XS2

LC, FC 2x/1x/OC-48/STM-16/1000Base-LX, 1310 nm single mode with DMI management 2 km (1.2 miles)*

TN-SFP-FC2XS15

LC, FC 2x/1x/OC-48/STM-16/1000Base-LX, 1310 nm single mode with DMI management 15 km (9.3 miles)*

TN-SFP-FC2XS40

LC, FC 2x/1x/OC-48/STM-16/1000Base-LX, 1310 nm single mode with DMI management 40 km (24.9 miles)*

Part Number Simplex Fiber-Optic Port

TN-SFP-BXU**

LC, 1000Base-BX, Single Fiber, 1310nm TX/1490nm RX, single mode with DMI management, 10 km (6.2 miles) .

TNSFP-BXD**

LC, 1000Base-BX, Single Fiber, 1490nm TX/1310nm RX, single mode, 10 km (6.2 miles) with DMI management.

TN-SFP-BXU2**

LC, 1000Base-BX, Single Fiber, 1310nm TX/1490nm RX, single mode, 20 km (12.4 miles) with DMI management.

TN-SFP-BXD2**

LC, 1000Base-BX, Single Fiber, 1490nm TX/1310nm RX, single mode, 20 km (12.4miles) with DMI management.

techsupport@transition.com -- Click the “Transition Now” link for a live Web chat.

Connect the fiber cable to the SFP Transceiver module as shown.

Connect the fiber cable

to the other device

(media converter,

hub, etc.) as shown

Installation

Important: In Cisco Systems' literature, Cisco switches with SFP slots do not accept SFP modules from other manufacturers. The Cisco switch identifies the manufacturer’s ID along with the part number and blocks operations to the port for non-Cisco modules. Other major SFP switch manufacturers do not indicate in their literature that such restrictions are imposed.

Installing the SFP transceiver

To install the SFP module into a media converter, do the following:

1. Position the module at the installation slot with the label faces up.

2. Slide the module into the slot fully to ensure proper connection.

Installing the fiber cable

To install the fiber cable, do the following:

1. Locate 1000Base-SX-compliant or 1000Base-LX-compliant fiber cable with male TX to RX connectors installed at both ends.

2. Install the fiber cable as shown below.

Part Number Simplex Fiber-Optic Port

TN-SFP-LXB11**

LC, 1000BASE-LX, 1310TX/1550RX Simplex, single mode, with DMI, 10km (6.2 miles)*

TN-SFP-LXB12**

LC, 1000BASE-LX, 1550TX/1310RX Simplex, single mode, with DMI management, 10km (6.2 miles)*

TN-SFP-LXB21**

LC, 1000BASE-LX, 1310TX/1550RX Simplex, single mode, with DMI management, 20km (12.4 miles)*

TN-SFP-LXB22**

LC, 1000BASE-LX, 1550TX/1310RX Simplex, single mode, with DMI management, 20km (12.4 miles)*

TN-SFP-LXB41**

LC, 1000BASE-LX, 1310TX/1550RX Simplex, single mode, with DMI management, 40km (24.9 miles)*

TN-SFP-LXB42**

LC, 1000BASE-LX, 1550TX/1310RX Simplex, single mode, with DMI management, 40km (24.9 miles)*

**Install simplex or single-fiber models in pairs in the same network where one is the local SFP and the other is the remote SFP.

Page 3

TN-SFP-xxx

Tech Support: 1-800-260-1312 -- International: 00-1-952-941-7600 -- (24 hours)

Diagnostic Monitoring Interface (DMI)

The following DMI port screen and explanation table contains brief definitions of the DMI support offered on Transition Networks SFP optical interfaces. For further information, please see the help option on the CPSMM-xxx SNMP agent or Focal Point, Transition Networks' GUI.

Variable Name Description

DMI Rx Power Measured Receive optical power in microwatts and in decibels

relative to 1mW.

DMI Rx Power Alarm Alarm status of measured receive optical power.

DMI Temp Internally measured temperature of transceiver in degrees C

and degrees F.

DMI Temp Alarm Alarm status for internally measured temperature of the

transceiver.

DMI Bias Current Measured transmit bias current in microamperes.

DMI Bias Alarm Alarm status for measured transmit bias current for the

interface.

DMI Tx Power Measured transmit power in microwatts and in decibels

relative to 1mW.

DMI Tx Power Alarm Alarm status of measured transmit power.

Rx Power Intrusion Threshold

Instructs the converter to stop passing traffic when the receive power drops below the new threshold. This feature is sometimes referred to as 'Intrusion Detection,' since tapping into a fiber to intercept traffic leads to a reduction in receive power. This value can be entered in microwatts or in decibels relative to 1mW.

Note: This feature is not available on all devices.

techsupport@transition.com -- Click the “Transition Now” link for a live Web chat.

Fiber Cable Specification

The physical characteristics must meet or exceed IEEE 802.3z™ specifications.

single mode fiber (recommended): 9 µm Multimode fiber (recommended): 62.5/125 µm Multimode fiber (optional): 100/140, 85/140, 50/125 µm

TN-SFP-SX 850 nm multimode Fiber Optic Transmitter Power: min: -9.5 dBm max: -4.0 dBm Fiber Optic Receiver Sensitivity: min: -17.0 dBm max: -3.0 dBm Link Budget: 7.5 dB

TN-SFP-SXD 850 nm multimode Fiber Optic Transmitter Power: min: -9.5 dBm max: -4.0 dBm Fiber Optic Receiver Sensitivity: min: -17.0 dBm max: -3.0 dBm Link Budget: 7.5 dB

TN-SFP-ESX-5 1310 nm single mode Fiber Optic Transmitter Power: min: -10.0 dBm max: -3.0 dBm Fiber Optic Receiver Sensitivity: min: -18.0 dBm max: -3.0 dBm Link Budget: 8.0dB

TN-SFP-ESX-6 1310 nm single mode Fiber Optic Transmitter Power: min: -10.0 dBm max: 3.0 dBm Fiber Optic Receiver Sensitivity: min: -18.0 dBm max: -3.0 dBm Link Budget: 8.0 dB

TN-SFP-LX1 1310 nm single mode TN-SFP-ELX1 1310 nm single mode Fiber Optic Transmitter Power: min: -9.5 dBm max: -3.0 dBm Fiber Optic Receiver Sensitivity: min: -21.0 dBm max: -3.0 dBm Link Budget: 11.5 dB

TN-SFP-LX3 1310 nm single mode Fiber Optic Transmitter Power: min: -5.0 dBm max: 0.0 dBm Fiber Optic Receiver Sensitivity: min: -24.0 dBm max: -3.0 dBm Link Budget: 19.0 dB

TN-SFP-LX5 1550 nm single mode Fiber Optic Transmitter Power: min: -5.0 dBm max: 0.0 dBm Fiber Optic Receiver Sensitivity: min: -24.0 dBm max: -3.0 dBm Link Budget: 19.0 dB

TN-SFP-LX8 1550 nm single mode Fiber Optic Transmitter Power: min: 0.0 dBm max: +5.0 dBm Fiber Optic Receiver Sensitivity: min: -24.0 dBm max: -3.0 dBm Link Budget: 24.0 dB

TN-SFP-LX12 1550 nm single mode Fiber Optic Transmitter Power: min: 0.0 dBm max: +5.0 dBm Fiber Optic Receiver Sensitivity: min: -32.0 dBm max: -9.0 dBm Link Budget: 32.0 dB

Page 4

TN-SFP-xxx

Tech Support: 1-800-260-1312 -- International: 00-1-952-941-7600 -- (24 hours)

Fiber Cable Specification -- Continued

TN-SFP-LX16 1550 nm single mode Fiber Optic Transmitter Power: min: 1.0 dBm max: +5.0 dBm Fiber Optic Receiver Sensitivity: min: -36.0 dBm max: -10.0 dBm Link Budget: 37.0 dB

TN-SFP-OC3M 1300 nm multimode Fiber Optic Transmitter Power: min: -19 dBm max: -12.0dBm Fiber Optic Receiver Sensitivity: min: -30.0 dBm max: -8.0 dBm Link Budget: 11.0 dB

TN-SFP-OC3S 1310 nm single mode Fiber Optic Transmitter Power: min: -14.0 dBm max: -8.0 dBm Fiber Optic Receiver Sensitivity: min: -31.0 dBm max: -8.0 dBm Link Budget: 17.0 dB

TN-SFP-OC3S8 1310 nm single mode Fiber Optic Transmitter Power: min: -5.0 dBm max: -0.0 dBm Fiber Optic Receiver Sensitivity: min: -34.0 dBm max: -8.0 dBm Link Budget: 29.0 dB

TN-SFP-OC12M 1300 nm multimode Fiber Optic Transmitter Power: min: -19 dBm max: -12.0dBm Fiber Optic Receiver Sensitivity: min: -26.0 dBm max: -8.0 dBm Link Budget: 7.0 dB

TN-SFP-OC12S 1310 nm single mode Fiber Optic Transmitter Power: min: -14.0 dBm max: -8.0 dBm Fiber Optic Receiver Sensitivity: min: -28.0 dBm max: -5.0 dBm Link Budget: 14.0 dB

TN-SFP-FC2XM 850 nm multimode Fiber Optic Transmitter Power: min: -9.5 dBm max: -3.0 dBm Fiber Optic Receiver Sensitivity: min: -15.0 dBm max: 0.0 dBm Link Budget: 5.5 dB

TN-SFP-FC2XS2 1310 nm single mode Fiber Optic Transmitter Power: min: -9.5 dBm max: -3.0 dBm Fiber Optic Receiver Sensitivity: min: -18.0 dBm max: -3.0 dBm Link Budget: 8.5 dB

TN-SFP-FC2XS15 1310 nm single mode Fiber Optic Transmitter Power: min: -5.0 dBm max: 0.0 dBm Fiber Optic Receiver Sensitivity: min: -18.0 dBm max: -0.0 dBm Link Budget: 13.0 dB

TN-SFP-FC2XS40 1310 nm single mode Fiber Optic Transmitter Power: min: -2.0 dBm max: 3.0 dBm Fiber Optic Receiver Sensitivity: min: -28.0 dBm max: -9.0 dBm Link Budget: 26.0 dB

techsupport@transition.com -- Click the “Transition Now” link for a live Web chat.

Fiber Cable Specification -- Continued

TN-SFP-BXU 1310TX/1490RX single mode TN-SFP-BXD 1490TX/1310RX single mode Fiber Optic Transmitter Power: min: -9.0 dBm max: -3.0 dBm Fiber Optic Receiver Sensitivity: min: -20.0 dBm max: -3.0 dBm Link Budget: 11.0 dB

TN-SFP-BXU2 1310TX/1490RX single mode TN-SFP-BXD2 1490TX/1310RX single mode Fiber Optic Transmitter Power: min: -8.0 dBm max: -3.0 dBm Fiber Optic Receiver Sensitivity: min: -22.0 dBm max: -3.0 dBm Link Budget: 14.0 dB

TN-SFP-LXB11 1310TX/1550RX single mode TN-SFP-LXB12 1550TX/1310RX single mode Fiber Optic Transmitter Power: min: -9.0 dBm max: -3.0 dBm Fiber Optic Receiver Sensitivity: min: -20.0 dBm max: -3.0 dBm Link Budget: 11.0 dB

TN-SFP-LXB21 1310TX/1550RX single mode TN-SFP-LXB22 1550TX/1310RX single mode Fiber Optic Transmitter Power: min: -8.0 dBm max: -3.0 dBm Fiber Optic Receiver Sensitivity: min: -22.0 dBm max: -3.0 dBm Link Budget: 14.0 dB

TN-SFP-LXB41 1310TX/1550RX single mode TN-SFP-LXB42 1550TX/1310RX single mode Fiber Optic Transmitter Power: min: -3.0 dBm max: 2.0 dBm Fiber Optic Receiver Sensitivity: min: -23.0 dBm max: -3.0 dBm Link Budget: 20.0 dB

For the most up-to-date information on the TN-SFP-xxx transceiver module, view the user’s guide on-line at: www.transition.com.

WARNING:

Visible and invisible laser radiation when open. Do not stare into beam or view directly with optical instruments. Failure to observe this warning could result damage to your eyes or blindness.

WARNING:

Use of controls, adjustments or the performance of procedures other than those specified herein could result in hazardous radiation exposure.

The fiber optic transmitters on this device meet Class I Laser safety requirements per IEC-825/CDRH standards and comply with 21 CFR1040.10 and 21CFR1040.11.

Page 5

TN-SFP-xxx

Tech Support: 1-800-260-1312 -- International: 00-1-952-941-7600 -- (24 hours)

Technical Specification

For use with Transition Networks Model TN-SFP-xxx or equivalent.

Standard: IEEE 802.3 2003; ANSI X3.297-1997

TN-SFP-SX or -LXx SFP or TN-SFP-BXx modules

: Compliant with

IEEE 802.3z Gigabit Ethernet; FC-1X SM-LC-L FC-PI.

TN-SFP-OC3x SFP modules

: Compliant with 100BASE-FX;

SONET OC-3 /SDH STM-1 (S-1.1)

TN-SFP-OC12x SFP

modules: Compliant with SONET OC-12 /SDH

STM-4 (S-4.1)

TN-SFP-FC2Xx SFP modules

: Compliant with IEEE 802.3z Gigabit Ethernet; FC-1X/2X SM-LC-L FC-PI; SONET OC-48 /SDHSTM-16 (S-16.1)

Dimensions: 0.52 x 2.18 x 0.33" (13.4 x 55.5 x 8.5 mm)

Weight: 1 oz. (28 g) approximately

Power: 3.3V, power consumption = 0.66 W

Tmra:* TN-SFP-SX /-ELX1/-LX1/-FC2XM/-FC2XS2:

10°C to 85°C (140°F to 185°F)

TN-SFP-LX3/-LX5/-LX8/-LX12/-OCx/-FC2XS15/-FC2XS40/-BXx: 0°C to 70°C (32°F to 158° F )

Storage Temp: -40°C to 85°C (-40° to 185°F) Humidity: 5% to 95%, non-condensing Altitude: 0 to 10,000 feet

Warranty: Lifetime

*Manufacturer’s ambient rated temperature.

Note: Transition Networks' SFP modules fully comply with Multi-Sourcing

Agreement (MSA). This compliance allows our SFP modules to be used in other MSA compliant most other SFP platforms without any problems.

techsupport@transition.com -- Click the “Transition Now” link for a live Web chat.

Technical support

Technical support is available 24 hours a day. U.S.A. and Canada: 1-800-260-1312 International: 00-1-952-941-7600

Transition now

Chat live via the Web with Transition Networks Technical Support. Log onto www.transition.com and click the Transitio

n Now link.

Web-Based seminars

Transition Networks provides seminars via live web-based training. Log onto www.transition.com and click the Learning Center link.

E-Mail

Ask a question anytime by sending an e-mail to our technical support staff. techsupport@transition.com

Address

Transition Networks 10900 Red Circle Drive Minnetonka, MN 55343 U.S.A. telephone: 952-941-7600 toll free: 800-526-9267 fax: 952-941-2322

Page 6

TN-SFP-xxx

Tech Support: 1-800-260-1312 -- International: 00-1-952-941-7600 -- (24 hours)

Declaration of Conformity

Name of Mfg: Transition Networks

10900 Red Circle Drive, Minnetonka MN 55343 U.S.A.

Model: TN-SFP-xxx Series Transceiver Modules Part Number(s): TN-SFP-SX, TN-SFP-SXD, TN-SFP-ESX5, TN-SFP-ESX6,

TN-SFP-LX1, TN-SFP-ELX1 TN-SFP-LX3, TN-SFP-LX5, TN-SFP-LX8, TN-SFP-LX12,TN-SFP-LX16,TN-SFP-OC3M, TN-SFP-OC3S, TN-SFP-OC3S3, TN-SFP-OC3S8, TN-SFP-OC12M, TN-SFP-OC12S, N-SFP-FC2XM, TN-SFP-FC2XS2,TN-SFP-FC2XS15, TN-SFP-FC2XS40, TN-SFP-BXU, TN-SFP-BXD, TN-SFP-BXU2, TN-SFP-BXD2, TN-SFP-LXB11, TN-SFP-LXB12, TN-SFP-LXB21, TN-SFP-LXB22, TN-SFP-BX41, TN-SFP-BX42

Regulation: EMC Directive 89/336/EEC Purpose: To declare that the TN-SFP-xxx to which this declaration refers

is in conformity with the following standards:

IEC 60825-1; IEC60825-2; FC1X SM-LC-L FC-PI; FC1X/2X SM-LC-L FC-PI; SONET OC-3 /SDH STM-1 (S-1.1); SONET OC-12 /SDH STM-4 (S-4.1); ONET OC-48/ SDHSTM-16 (S-16.1); IEEE 802.3z 2003; ANSI X3.297 1997; Class A; FDA 21; CFR1040.10; CFR1040.11

I, the undersigned, hereby declare that the equipment specified above conforms to the above Directive(s) and Standard(s).

August, 2008____

Stephen Anderson, Vice-President of Engineering Date

techsupport@transition.com -- Click the Transition Now link for a live Web chat.

Compliance Information

CE Mark: IEC-60825; FDA 21; CFR 1040.10 and 1040.11

FCC regulations

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at the user's own expense.

Canadian regulations

This digital apparatus does not exceed the Class A limits for radio noise for digital apparatus set out on the radio interference regulations of the Canadian Department of Communications. Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la Class A prescrites dans le Règlement sur le brouillage radioélectrique édicté par le ministère des Communications du Canada.

European regulations Warning

This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

Achtung !

Dieses ist ein Gerät der Funkstörgrenzwertklasse A. In Wohnbereichen können bei Betrieb dieses Gerätes Rundfunkstörungen auftreten. In diesem Fäll ist der Benutzer für Gegenmaßnahmen verantwortlich.

Attention !

Ceci est un produit de Classe A. Dans un environment domestique, ce produit risque de créer des interférences radioélectriques, il appartiendra alors à l'utilsateur de prende les measures spécifiques appropriées.

In accordance with European Union Directive 2002/96/EC of the European Parliament and of the Council of 27 January 2003, Transition Networks will accept post usage returns of this product for proper disposal. The contact information for this activity can be found in the 'Contact Us' portion of this document.

CAUTION: RJ connectors are NOT INTENDED FOR CONNECTION TO THE PUBLIC TELEPHONE NETWORK. Failure to observe this caution could result in damage to the public telephone network.

Der Anschluss dieses Gerätes an ein öffentlickes Telekommunikationsnetz in den EGMitgliedstaaten verstösst gegen die jeweligen einzelstaatlichen Gesetze zur Anwendung der Richtlinie 91/263/EWG zur Angleichung der Rechtsvorschriften der Mitgliedstaaten über Telekommunikationsendeinrichtungen einschliesslich der gegenseitigen Anerkennung ihrer Konformität.

Page 7

Trademark notice

All trademarks and registered trademarks are the property of their respective owners.

Copyright restrictions © 2004 Transition Networks. All rights reserved. No part of this work may be reproduced or used in any form or means (graphic, electronic, mechanical) without written permission from Transition Networks.

33308.K

Printed in the U.S.A.

TN-SFP-xxx