Service Parts ......................................12
MANUEL DE L’UTILISATEUR..........................13
DANGER:Always wear safety goggles and gloves in order
to avoid personal injury.
QL045
2
Warranty
ONE YEAR LIMITED WARRANTY
A thorough inspection must be made before installation and any damage must be promptly reported.We will not be liable for failures or damage that could have been discovered or avoided by proper inspection and testing prior to installation.
Conglom Inc. warrants this product to be free from defects in materials or workmanship for one (1) year from the date of purchase. Proof of purchase (original sales receipt) from the original consumer purchaser must be made available to Conglom Inc. for all warranty claims.
This warranty is non-transferable and shall be voided if the unit is removed from its initial installation or if it is not installed following the manufacturer’s instructions. It does not apply in the event of product damage due to the use of other than genuine Conglom Inc. replacement parts, (Replacement parts may be obtained by e-mail at cs@conglomkb.com or by calling 1-877-333-0098 between 8:30 am - 5:00 pm EST) installation error,abuse,misuse or improper care and maintenance (whether performed by a plumber,contractor,service provider or member of the purchaser’s household).The warranty excludes damage due to aggressive air or water conditions, harsh or abrasive cleaners and/or materials.
Under no circumstance shall we be held liable for personal injury or property damage resulting from improper installation or use of this product.We will not be held liable for inconvenience caused by loss of use of this product, costs incurred for labour or materials, removal and installation of replacement units,or any other incidental or consequential damages.Costs relating to obtaining access for repair or replacement are the responsibility of the user.
Our obligation shall be limited to the repair or replacement of a unit (at our discretion) that may prove, by our sole examination, to be defective under normal use and service during the warranty period.
Any failure of this product that is not traceable to a defect in material or workmanship is not covered by this warranty.These non-warrantable items include, but are not limited to:
ENGLISH
-Improper installation not in accordance with manufacturer’s instructions.
-Dents and/or scratches incurred during shipping, handling, or installation.
-Changeincolourornishduetochemicalusage.
-Damage caused by failure to follow care and cleaning guidelines, including damage caused by the use of abrasive cleaners.
-Alterations made to the unit by the purchaser or installer.
This warranty does not extend to commercial and institutional installation or use.
WARRANTY CLAIM PROCEDURE
If a claimable defect occurs or replacement parts are needed,(Service available in English and French, Monday - Friday from 8:30 am - 5:00 pm EST).
Before you make your call, please ensure that you have:
-Model number or description.
-Proof of sale.
-Details regarding the defect and/or part number.
-Name(s) and address(es) of the owner and/or installer.
pleasecontactourcustomerserviceteamat
cs@conglomkb.com
or 1-877-333-0098
3CONGLOMKB.COM
Please contact cs@conglomkb.com or 1-877-333-0098 for further assistance.
Pre-Installation
TOOLS/MATERIALS REQUIRED (NOT SUPPLIED)
ENGLISH
Adjustable wrench
Utility knifePipe wrenchSealant
Carpenter’s levelHacksawSafety gloves
Needle nose pliers
Phillips screwdriver
Safety gogglesMasking Tape
PARTS REQUIRED (NOT SUPPLIED)
P-TrapTail PipeSupply Line
QL045
4
Pre-Installation (continued)
PACKAGE CONTENTS
Carefully check the utility cabinet for damage and/or missing parts prior to installation. If there is any damage or if you are missing parts, do not proceed with the installation. Report damage and/or missing parts immediately to our customer service team at cs@conglomkb.com or 1-877-333-0098 (Service available in English and French, Monday - Friday from 8:30 am - 5:00 pm EST). Please do not dispose of packaging
beforeyouaresatisedwithyournew utility cabinet.
A
B
ENGLISH
C
G
J
H
PartDescriptionQuantity
ACabinet1BUtility Sink1
DE
F
K
CFaucet1DStrainer Basket1EStrainer Assembly1FDoor Handles2GLeveling Legs4HDoor Handle Screws4JLeveling Leg Screws16KHex Key1
5CONGLOMKB.COM
Please contact cs@conglomkb.com or 1-877-333-0098 for further assistance.
Installation
INSTALLING THE FAUCET
1. Carefully take out all the parts of the faucet assembly (B).The faucet is pre-assembled, except for the sprayer head.
ENGLISH
2. Take the retaining nut, metal washer, and gasket off of the faucet body.
3. Place the faucet body carefully through the hole in the sink (E).
4. From underneath, slide the gasket, metal washer and retaining nut over the supply lines and up to the exposed threaded section of the faucet.Tighten the retaining nut by hand until it is snug. Using a wrench or pliers, tighten the assembly.
5. Gently tighten the two screws on the retaining nut. Do not over tighten.
6. Screw the sprayer head onto the gooseneck.
7. Connect the water supply lines (not supplied) to the faucet.
Faucet body
Gasket
Retaining ring
Screws
Gooseneck
Sprayer
head
Faucet handle
Metal washerThreaded section
8. Use two wrenches to tighten the two ends together. Please note,
-Apply plumbing putty or silicone sealant to the top side of the drain opening.
-Insert the strainer body into the drain opening and press it down until it is evenly seated.
-Assemble the rubber gasket, friction washer and strainer locknut onto the strainer body from underneath the sink.Hand tighten the strainer locknut until it is snug.Do not overtighten.
-Insert theplasticangeintotheange-endof thetailpipe(not supplied) then secure the tailpipe to the strainer body using the connecting nut.Tighten the connecting nut until it is snug. Do not overtighten.
-Remove excess sealant from around the drain opening.
NOTE:
The tail pipe is not supplied.
Strainer Basket
Strainer Body
Sink
Sealant
Rubber Gasket
Fiber Washer
Strainer Locknut
Plastic Flange
Tailpipe
Connecting Nut
7CONGLOMKB.COM
Please contact cs@conglomkb.com or 1-877-333-0098 for further assistance.
Installation (continued)
INSTALLING THE LEVELING LEGS
-Remove the cabinet (A) and place it on a soft, protective surface.
ENGLISH
-Attach each leveling leg (G) to the bottom of the cabinet (A) using four of the provided screws (J).
-Gently rotate the cabinet (A) right side up.
A
WARNING:Always wear safety goggles and gloves during
installation.
CAUTION:Do not rest or bump the leveling legs on the side
as this may cause them to detach or break.
J
G
DOOR HANDLE INSTALLATION
-Attach door handles (F) to the cabinet doors using supplied door handle screws (H) and a screw driver. Do not overtighten.
QL045
8
F
H
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.