Transfer Master 311N User manual

OTHER PRODUCTS AVAILABLE

For more models like

this, call 800-475-8122.

Ask about our Protect-a-bed — a machine

washable, waterproof mattress protector!

Now available in all sizes!

505 W. Williams • PO Box 917 • Postville, IA 52162

563-864-7364 • Fax: [phone]

www.transfermaster.com

Turn your bed into a luxury adjustable bed with

our independent dual-massage system that fits

right under your mattress!

Call in today to order your battery back-up, headboard, footboard,

or guard rails! Also ask for our hand control clips!

Transfer Master Products, Inc.

New Valiant Adjustable Bed

Model 311N

An Owner’s Manual

505 W. Williams • PO Box 917 • Postville, IA 52162

563-864-7364 • 800-475-8122 • Fax: [phone]

www.transfermaster.com

Your Serial #: ____________

*See note.

*Appearance of upholstry may differ from picture.

Page 2

“The bed is great!! Thank you so much for helping me get

my life back to normal after Katrina.

“I have been disabled since 1997 from a spinal cord injury.

For the first time in almost ten years, I am able to sleep
through the night—eight hours plus. I love my Transfer

Master bed!”

James White

Hyde Park, MA

Pamela Ortega

Baton Rouge, LA

YOU MADE THE RIGHT CHOICE

“...We purchased two of your beds...and found them

durably constructed and maintenance free and a great relief
to my osteoarthritis. We highly recommend your products

and wonder how we ever lived without them!”

B. Clark

Marstons Mill, MA

FU LL - O NE YE AR WA R RA NTY

Page 7

Transfer Master Products, Inc. warrants this bed, to the original
consumer only, against defects in material or workmanship for a
period of one year from the date of purchase by the original
consumer. Transfer Master Products, Inc., through it’s authorized
distributor/service organization, will repair or replace, at it’s option,
any bed which evidences, within the warranty period, a defect in
material or workmanship.

This warranty does not include any damage caused to fabric, electrical
cables or cords, external or internal finish. Nor does this warranty apply
to the foundation cover or mattress that are warranted under a
separate warranty by the specific manufacturer. Contact your dealer for

service on those items. Transfer Master Products, Inc. will, at it’s option,

repair and/or replace the defective parts and/or components provided
that the warranty parts have not been subject to misuse or improper
service by the consumer, have not been damaged in transit or handling
and/or have not been altered or repaired by unauthorized
representatives. This warranty does not include costs for unnecessary
service calls, i.e., in-home service calls solely for the purpose of
educating the consumer about the product, or finding an unsatisfactory
power connection. This warranty extends only to the original purchaser.

Proof of purchase is required. If Transfer Master Products, Inc.’s original

purchaser (if different from the consumer) gives a warranty to their
customer which in any way differs from the warranty extended therein,
Transfer Master Products, Inc. is in no way to be held liable to indemnify

Transfer Master Products, Inc.’s original purchaser or any subsequent

purchaser, for any portion of the warranty which in any way is different
from, modifies or alters the warranty written above. Transfer Master
Products, Inc. shall not be liable for any incidental or consequential
damages or for any other damage or loss not contained in this warranty.
This warranty gives you specific legal rights. You may also have other
rights that vary from state to state. This warranty is expressly in lieu of
all other warranties expressed or implied.

SL EE P TI PS

Page 6

Is there any maintenance I
should do to my bed?

Lower the head, back, and leg sections in
down position when not in use. We
recommend applying Silicone Spray in the
pivot points of your bed. This should be

done every 4-6 months.

Sleep is one of the body’s best ways to re-build. We all need 8-10 hours of sleep per

night. Good nightly sleep requires you to relax your body so you can sleep. Your

New Valiant allows you to do that, every night.

You can position your bed to relax, reposition to read, reposition to watch TV, repo-

sition to sleep and reposition again during the night if you so desire.

FREQUENTLY ASKED QUESTIONS

If I have a problem after I have
my bed, what should I do?

Call the location where you
purchased your bed. Someone will be

more than happy to help you.

Can this adjustable bed help me
get out of bed?

Yes, raise your head section all the
way up, and lower your foot section
flat. Then you can easily slide your
legs to the floor while still having the

support of your bed.

Can I or should I turn my
mattress like I did my old one?

In order to extend the life of your
mattress and insure it wears
uniformly, we recommend you turn
the mattress four times a year—

Spring,, Summer, Fall & Winter.

Do I need special wiring for my
adjustable bed?

No. The beds use standard, grounded,
household outlets and require very little
electricity. Please do not plug bed into an

extension cord.

Do I need specialty sheets for my
bed?

Many of our beds are approximately
the same size as most beds so there
is usually no need for specialty size
sheets. In the event you have

purchased an 84” Long bed, we can

supply you with the name and
number of a company which

specializes in custom size bedding.

Page 3

NEVER PLACE HANDS IN THE LIFTING MECHANISM
WHILE THE BED IS PLUGGED IN.

DO NOT ALLOW CHILDREN TO OPERATE THE BED.

THIS BED IS NOT A TRANSPORTATION DEVICE, THE
BED SHOULD NOT BE MOVED ANY SIGNIFICANT DIS­TANCE WITH A PERSON ON THE BED.

DO NOT OPERATE THE LOWER SECTION WHEN
THERE ARE TWO PEOPLE IN THE BED.

KEEP ALL CORDS AND LINENS CLEAR OF THE LIFTING
MECHANISM.

DO NOT SIT ON OR TRANSFER FROM THE FOOT OF
THE BED - TO DO SO WILL CAUSE DAMAGE.

BED CAN ONLY BE OPERATED WITH CASTERS OR
GLIDES INSERTED. TO OPERATE WITHOUT WILL
CAUSE DAMAGE AND WILL NOT BE COVERED UN­DER WARRANTY.

TO PREVENT INJURY, FLIP BED ON ITS SIDE
WHEN CHANGING LIFT MOTOR(S).

Basic Use Instructions

Page 4

Half Length Guard Rail Instructions

Use 7/16 socket or open end wrench.

1. Locate mounting hardware on the underside of the deck.

2. Remove nuts from all 4 threaded systems.

3. Position bracket on underside of bed and tighten hardware
in place.

4. Place half rail into bracket and clip into holding place.

Step 1: Carefully examine to determine if there is any shipping
damage. If so, notify the carrier immediately and contact our of­fice (800-475-8122) to inform us of the claim.
Step 2: When handling components of the bed, use work gloves
to protect your hands.
Step 3: Make sure hand-held control is in safe area so as to not
get damaged when turning base deck over.
Step 4: There are up to 3 mattress retainer bars on each bed,
unless you have ordered half rails for the foot section. These re­tainer bars keep the mattress in place when adjusting bed posi­tions. Locate mattress retainer bars, which are clipped together
and bubble wrapped.
Step 5: Bolts have already been installed in the deck boards. Using

a 7/16” wrench, remove the bolts from the deck boards. Install

the mattress retainer bar/bars by lining up retainer bar/bars with
holes on the underside of the deck, using supplied bolts.
Step 6: Tighten hardware with a 7/16” wrench.
Step 7: Place mattress on the bed.

Basic Assembly Instructions

Page 5

Guard Rail and Retainer Bar Assembly Diagram