Trans Electric WFD1000 User Manual

Wireless Display Receiver

Smartphone(Android 4.2) to HDMI

Model: WFD-1000

INTRODUCTION

Congratulations on your purchase of the WFD-1000 Wireless Display

Receiver. Your satisfaction is very important to us.

The WFD-1000 allows you to send image or video on your Smartphone to a

HDTV. Anything shows on the Smartphone will also show on the HDTV.

WFD-1000 now supports Miracast™ Wireless Display. You can launch the

wireless display application on a Miracast™-compatible Smartphone, tablet.

FEATURES

For the best performance of this Wireless Display Receiver, please read this
manual carefully and keep it for further information.

Features:

 Wireless to HDMI Conversion (Smartphone to HDTV)
 Mirroring display from Smartphone to HDTV
 Up to 1080P/30fps
 Support HDMI 1.3 output and HDCP 2.0
 Micro USB powering

1

CONTENTS

USB Cable

Content of Package

 WFD-1000 main unit
 USB Power Cable
 User’s manual

CONNECTION ILLUSTRATION

 Connection step

(1) Connect HDMI cable from HDMI output to HDTV.
(2) Connect USB Power cable (attached) the micro USB end to the power

port of WFD-1000 and the USB A to the USB port of TV, Set Top Box or
power adapter with USB A port.

The LED of WFD-1000 will light on, but at this moment WFD-1000 is not

connected to your Smartphone yet.

WFD-1000

30 feet

HDMI Cable

HDTV

2

(3) Turn on your HDTV TV and select the correct HDMI input.

Note:
If you do not see this screen, make sure that the HDMI input of HDTV is set to

the HDMI port where the WFD-1000 is connected and all cable connections are
secured firmly.

3