Trans Electric BTR5300 User Manual
BTR-5300
Main Unit
Bluetooth music receiver For Car Use with 2.1A
powering capability
With SBC supported
◎ SBC codec support
◎ A2DP Bluetooth profile supported
33 feet◎ (10M) effective range
◎ Audio RL audio output
◎ 8 devices ID storable
◎ USB port for powering capability 2.1A
Blue LED for operation, Red LED for indication of USB port◎
Changeable fuse◎
Feature
What’s in the box
3.5mm male→
male Audio cable
1
Setup your BTR-5300
Analogue connection
1. Connect one 3.5mm end of the included cable to headphone jacket on the
BTR-5300.
2. Connect the other end to an audio input on your car stereo system (3.5mm
3.5mm or 3.5mm2 RCA (not included)).
3. Consult your stereo user’s manual for more information on how to accomplish
this.
4. Push the BTR-5300 into the cigarette lighter port.
5. The LED light will flash once to show the unit is powered and ready for being
paired for your devices.
Powering your PAD or Smartphone
The USB port of BTR-5300 can provide 2.1A powering capability, you can use your
charging cable with USB Type A connector (not included) to charge your
Smartphone and PAD
2
Pairing of BTR-5300
iPad/ iPhone/ iPod touch
1. Go to Bluetooth manager of your iPad/iPhone/iPod touch by the following steps
a .From your iPad/iPhone/iPod
touch home page, tap
“setting”
2. Turn On the Bluetooth
function
b. Inside Settings tap on
“General”
3. Your iPod/iPhone/iPad
will auto searching
available device. You will
see “Music Receiver”
then Tap on it.
c. Inside General tap on
“Bluetooth”
4. Enter “0000” when the
player asks for PIN code
(some devices have no need
to input PIN). This will allow
the iPad/iPhone/iPod touch
to pair with “Music Receiver”
3
Loading...