Trans Electric BTR2000N User Manual
11270
Bluetooth audio receiver
With A2DP, CSR® aptX® supported and With NFCTM Fast
paring and connection.
◎
aptX® codec support
◎
NFC Quick link support
◎
SBC codec support
◎
A2DP Bluetooth profile supported
◎
33 feet(10M) effective range
◎
TOSLINK digital audio output
◎
Audio RL audio output
◎
8 devices ID storable
Feature
What’s in the box
Main unit AC/DC adaptor 3.5mm male 3.5mm female
male audio cable audio RL cable
1
Front
Back
Outlook and connectors
Top View
Side View
2
Setup your 11270
11270 with 3.5mm Stereo output and Optical output, but you can use only one
output at a time, it means you need to make a switch setting on the back of 11270
like followed
Analogue connection
1. Connect one 3.5mm end of the include audio to headphone jacket on the 11270
2. Connect the other end to an audio input on your home stereo system (3.5mm or
3.5mm + 3.5mmm2 RCA). Consult your stereo user’s manual for more
information on how to accomplish this.
3
Digital connection
1. Connect one TOSLINK cable end to optical jacket on the 11270(recommended)
2. Connect the other end to one TOSLINK input of your home stereo system.
Consult your stereo user’s manual for more information on how to accomplish
this.
3. Connect AC power adaptor cable to DC input jacket of 11270, AC end to any AC
outlet.
4. The LED light will flash once to show the unit is powered and ready for being
paired for your devices.
4
Loading...