Trans Electric BTR-1002N User Manual
BTR-1002N
Bluetooth music receiver
With A2DP/SBC supported and With NFCTM fast paring
and connection.
Feature
◎SBC codec support
ort
upported
◎NFC Quick link supp
A2DP ◎ Bluetooth profile s
◎ 33 feet(10M) effective range
Audio RL◎ audio output
◎8 devices ID storable
What’s in the box
Main unit AC/DC adaptor 3.5mm male 3.5mm female
1
male
audio cable audio RL cable
Outlook and connectors
Fron
t
Top View
Back Side View
Setup your BTR-1002N
2
Analogue connection
end of the include audio to headphone jacket on the
other end to an audio input on your home stereo system (3.5mm or
ore information on how to accomplish
ect AC power adaptor cable to DC input jacket of BTR-1000, AC end to any
ht will flash once to show the unit is powered and ready for being
1. Connect one 3.5mm
BTR-1000
2. Connect the
3.5mm + 3.5mmm2 RCA). Consult your stereo user’s manual for more
information on how to accomplish this.
3. Consult your stereo user’s manual for m
this.
4. Conn
AC outlet.
5. The LED lig
paired for your devices.
NFC Fast connection and Pairing of BTR-1002N
BTR-1 oth
above.
ational system
ab the “setting” Choose “about Device” Make sure android version
002N is equipped with a standard NFC tag, there are NDEF information for Blueto
org and NFC forum defined. Before you can use this feature, you need to check your
Smartphone or tablet with NFC function and the operational system is Android 4.1 and
Start the NFC function
STEP1: Check the android oper
T
Is 4.1 or above
3
Step 2 : Turn on the NFC function
4
Back
to setting page Check NFC function Turn on NFC function
Step3: Fast Connection using NFC
AP the Smartphone to BT
T
R Pairing First Connection, if connected
*The message will pop up you can play music now
Please choose YES
op up *Some device will p
Some will not
Loading...