TransCore F4-06476-LP User Manual

Chapter 1 Introduction

Safety
Requirements

Product
Labeling

Intermec assumes no responsibility as regards
fulfilling the CE
Directive if the printer is handled, modified
or installed in any way other than that
described in Intermec's manuals.

Caution

• Read this manual carefully before

connecting the printer.

• Moving parts are exposed when the side

door is open, so ensure

• that the door is closed before you operate

the printer.

• Do not open the front/left-hand cover.

Dangerous voltage!

• Do not remove the bottom plate. Dangerous

voltage!

• Do not put your fingers inside the print

mechanism when the power is on.

• Do not operate printer with side door open

or feed plate removed.

• Place the printer on an even surface which

can support its weight of approximately 7
kgs (15.5 lbs) plus supplies.

• Do not spray the printer with water. If

using a hose to clean the
premises in an industrial environment,
remove the printer or
protect it carefully from spray and
moisture.

• Carefully read the warning text on the

envelope before using
a cleaning card.

The machine sign is attached to the printer's
rear plate and contains
information on type, model and serial number
as well as main
voltage. It also contains various signs of
approval.

8 Intermec E as yCod er F4-Installat ion & Operati on E d. 2