Transcend TS-UWL31, TS-UWH31, TS-UWE31 User Manual

TS-UWL31

TS-UWH31

TS-UWE31

USER/S MANUAL

Intel

®

Socket 370 Celeron

TM

/

Pentium® III FC-PGA Series

Your Supplier, Your Partner,

Your Friend.

Transcend

All manuals and user guides at all-guides.com

all-guides.com

TS-UWL31/TS-UWH31/TS-UWE31 Motherboard

Supporting Intel ® Socket 370 CeleronTM / Pemtium® III FC-PGA Processor Series

66/100/133MHz Front Side Bus

Intel® 810 Chipset

Welcome !!

Congratulations on your purchase of this great value motherboard, with its range of special
features and innovative onboard functions, built around the advanced architecture of the new
Intel® 810 series Chipset. More details to follow later in this manual.

Our Website

Please come and visit us at our website on http://www.transcendusa.com/ Youll find plenty of
interesting information about this and many other quality Transcend products.

Your Users Manual

This Users Manual is designed to help end users and system manufacturers to set up and
install the motherboard. All of the information within has been carefully checked for accuracy.
However, Transcend Information, Inc. (hereafter referred to as Transcend) carries no
responsibility or liability for any errors or inaccuracies which this manual may contain. This
includes references to products and software. In addition, the information and specifications
are subject to change without prior notice.

Disclaimer

Transcend provides this manual as is without any warranty of any kind, either expressed or
implied, including  but not limited to  the implied warranties, conditions of merchantability or
fitness for a particular purpose. Transcend, its management, employees, distributors and
agents are in no way liable for any indirect special, incidental or consequential damages,
including loss of profits, loss of business and the like. This is even if Transcend has been
advised of the possibility of such damages arising from any defect or error in this manual or
product.

Trademarks

All brands, product names and trademarks mentioned in this document are the property of
their respective owners or companies and are used solely for identification or explanation. It
is Transcend policy to respect all product rights.

Copyright

This manual may not, in whole or in part, be photocopied, reproduced, transcribed, translated
or transmitted, in whatever form or language, without the written consent of the manufacturer,
except for copies retained by the purchaser for personal archiving purposes.

Manual Version:1.0
Release Date: January,2000

Copyright © July 1999 Transcend Information, Inc.

All manuals and user guides at all-guides.com

Table of Contents

CHAPTER 1 INTRODUCTION 1

1.1 Essential Handling Precautions.......................................................................1

1.2 Checklist: Hardware Required for Setup..........................................................2

1.3 Package Contents..........................................................................................2

1.4 Specifications and Features.............................................................................3

CHAPTER 2 HARDWARE INSTALLATION 5

2.1 Transcend TS-UWL31/TS-UWH31/TS-UWE31 Motherboard............................5

2.2 Layout of Transcend TS-UWL31/TS-UWH31/TS-UWE31 Motherboard.................6

2.3 CPU Installation..............................................................................................7

2.4 66/100/133MHz System configuration.................................................................9

2.5 Memory Configuration..................................................................................10

2.6 Keyboard Wake Up......................................................................................11

2.7 Primary / Secondary IDE Connectors............................................................12

2.8 Floppy Disk Drive Connector........................................................................13

2.9 Fan Power Connectors................................................................................14

2.10 Wake-on-LAN Connector..............................................................................15

2.11 IrDA-Compliant Infrared Module Connector....................................................16

2.12 Panel Connectors.........................................................................................17

2.13 Power Connector.........................................................................................19

2.14 External Back Panel I/O Ports........................................................................20

2.15 Clear CMOS Jumper....................................................................................21

2.16 FWH Lock Jumper........................................................................................22

2.17 Onboard Audio Setting..................................................................................23

2.18 Internal Audio Connectors............................................................................24

All manuals and user guides at all-guides.com

2.19 Internal Serial Port Connector COMB ..........................................................25

2.20 VIO Adjust Jumper.............................................................................................26

CHAPTER 3 BIOS SETUP 27

3.1 BIOS Setup ............................................................................................... 27

3.2 The Main Menu ......................................................................................... 27

3.3 Standard CMOS Features........................................................................... 29

3.4 Advanced BIOS Features............................................................................ 32

3.5 Advanced Chipset Features ........................................................................ 35

3.6 Integrated Peripherals .................................................................................37

3.7 Power Management Setup...........................................................................41

3.8 PnP/PCI Configuration Setup....................................................................... 44

3.9 PC Health Status ........................................................................................46

3.10 Frequency/Voltage Control..........................................................................47

3.11 Load Fail-Safe Default.................................................................................48

3.12 Load Optimized Defaults.............................................................................48

3.13 Supervisor Password..................................................................................49

3.14 User Password...........................................................................................50

3.15 Save & Exit Setup.......................................................................................50

3.16 Exit Without Saving ................................................................................... 51

CHAPTER 4 SOFTWARE SETUP 52

4.1 INF Update for 810 Chipset ....................................................................... 52

4.2 VGA Driver Setup.......................................................................................53

4.3 Intel Security Controller Driver.....................................................................54

4.4 Audio Driver Setup.......................................................................................55

CHAPTER 5 BIOS UPGRADE 60

5.1 How to Check Your BIOS File Name and Version ........................................ 60

5.2 How to Download the Correct BIOS File from the Web..................................... 60

5.3 How to Upgrade Your Motherboard BIOS ......................................................... 61

All manuals and user guides at all-guides.com

INTRODUCTION 1

CHAPTER 1 INTRODUCTION

1.1 Essential Handling Precautions

IMPORTANT. Read this page before unpacking your motherboard!

• Power Supply

Be careful! Always ensure that the computer is disconnected from the power supply when
working on the motherboard and its components.

• Static

Static electricity may cause damage to the delicate integrated circuit chips on your motherboard.
Before handling the motherboard outside of its protective packaging, ensure that there is no
static electric charge in your body. To avoid this risk, please observe these simple precautions
while handling the motherboard and other computer components:

1. If possible, wear an anti-static wrist strap. This fits around your wrist and is connected to
a natural earth ground.

2. Touch a grounded or anti-static surface, or a metal fixture such as a pipe or the chassis of
your system, before touching the motherboard.

3. When you have removed the motherboard from its anti-static packaging, try to hold it only
by the edges, without touching any components.

4. Avoid contacting the components on add-on cards, motherboards, and modules with the
golden fingers (gold-colored connectors) which plug into the expansion slots.

5. It is safest to handle system components only by their mounting brackets.

6. Keep components which are not connected to the system in the anti-static packaging
whenever possible.
These precautions help to reduce the risk of static build-up and ensure any static discharge is
harmless to your equipment.

••

••

• Battery Replacement

The battery which holds the system settings memory on your motherboard should not
require replacement for at least five years, and probably much longer. In picture 2.2, it is
located near the bottom right hand corner.

All manuals and user guides at all-guides.com

Please replace your battery only with the same type, or a similar type recommended by the
manufacturer. If the battery is replaced incorrectly, there is a risk of a short circuit or explosion.
Used batteries should disposed of according to the manufacturers instructions.

••

••

• Electric Screwdrivers

To reduce the risk of damage to the motherboard due to excessive torque, avoid setting
electric screwdrivers above 7.5 kg/cm.

1.2 Checklist: Hardware Required for Setup

It is advisable to have all of these items of hardware available before you unpack your
motherboard from its anti-static packaging and start building your system.

- Computer case and chassis with appropriate power supply.

- Monitor.

- Socket 370 Central Processing Unit.

- DIMM memory module.

- PS/2 or USB Keyboard.

- PS/2 or USB Mouse.

- Hard Disk Drive.

- Floppy Disk Drive.

- CD-ROM Drive.

- (Optional) External Peripherals: printer, speakers, plotter, modem.

- (Optional) Internal Peripherals: modem, LAN cards.

1.3 Package Contents

This motherboard package should contain the following items. Please check them as soon as
you unpack. If you find any damaged or missing items, please contact your retailer.

- TS-UWL31/TS-UWH31/TS-UWE31 motherboard

- 1 X CD-ROM

- 1 X FDD cable

- Users Manual

- COM port cable x 1

- Ultra DMA / 66 cable x 1

2 INTRODUCTION

All manuals and user guides at all-guides.com

all-guides.com

1.4 Specifications and Features

• •

• •

• CPU

- Supports Intel® Socket 370 CeleronTM / Pentium® III FC-PGA Series

• •

• •

• Chipset

- TS-UWL31 : Intel® 810 Chipset

- TS-UWH31 : Intel

®

810- DC100 Chipset

- TS-UWE31 : Intel

®

810E Chipset

• •

• •

• Display Cache Memory

- 4MB Display Cache 100/133MHz SDRAM (TS-UWH31/TS-UWE31)

• •

• •

• DRAM Memory

- Supports Synchronous DRAM

- 2 x 168-pin DIMM module sockets on board

- 8~512MB memory size

- 8/16/32/64/128/256MB SDRAM DIMM

- 64 data bits structure only

• •

• •

• I/O Expansion Slot

- 3 x Master / Slave PCI slots (PCI 2.2 compliant)

- 1 x AMR (Audio/Modem Riser) slot

•

Award BIOS

- Supports PC99, Plug-and-Play

- Supports ACPI, APM, DMI, Green Feature

• •

• •

• I/O Functions

- Support PIO Mode 3,4 ATAPI devices and Ultra DMA/66

- Supports 2 high speed UART 16550 COM ports

- Supports SPP/EPP/ECP LPT port

- Supports 3 mode/1.44/2.88MB floppy drive

- Supports PS/2 Mouse and PS/2 Keyboard

- Supports IrDA port

- Supports 2 USB (Universal Serial Bus) ports

- Supports VGA port

INTRODUCTION 3

All manuals and user guides at all-guides.com

4 INTRODUCTION

- Supports Line-out, Line-in and MIC-in jack

- Supports Game/MIDI port

•

Built-in AC97 CODEC

- AC97 2.1 compliant

- SB emulation and support 3D Wavetable synthesis

•

Switching Voltage Regulator

- Intel VRM 8.4 compliant

•

Other Features

- Year 2000 compliant

- Power failure resume

- FWH (Firmware Hub) supports security manageability

- BIOS Virus protection (warning)

- PS/2 Mouse and Keyboard Wake Up

- Support Wake-on-LAN function

- Remote Ring Wake Up

- Time Wake Up

- Board voltage monitors for CPU core, +3.3V, +/-5.0V,+/-12.0V, VTT and VBAT

- CPU overheat alarm

- CPU fan auto-off in sleep mode

- VCORE & VIO Adjust

•

PCB Dimensions

- Micro ATX form factor, 4-layer PCB, 20.7cm x 24.5cm (8.15 x 9.6)

All manuals and user guides at all-guides.com

HARDWARE INSTALLATION 5

·

4M Bytes Display cache memory.

(TS-UWH31,TS-UWE31 only)

· Winbond 83627HF-AW

· Wake-on-LAN

· 4M bits FWH Flash Memory
(Intel 82802AB)

·

3x PCI Slots

·

1 x AMR Slot

(Audio/Modem Riser)

Back panel I/O ports CPU

Main Memory

Intel 810 chipset

Expansion SlotsAC97 CODEC

LPC SuperI/O

Display Cache

IrDA Header

System BIOS

WOL Header

Switching Reg.

· SIR, CIR, ASKIR

PCI IDE Connector

·

Bus Master

· PIO Mode 3/4

·

DMA Mode 2

·

Ultra DMA 33/66

FDD Connector

· Floppy Disk Drive Connector

· AC97 V2.1
Audio CODEC

COMB Connector

· Serial COM port 2 connector

·

Game/ MIDI port & Audio Jack

(Line-in, Line-out, MIC-in)

·

VGA port & serial port &

parallel printer port

·

2 x USB ports

·

PS/2 KB & PS/2 Mouse ports

·

Intel

®

Celeron/
PentiumIII FC-PGA
Series

·

Intel VRM8.4 Compliant

·2 x 168-pin SDRAM DIMM

·

Up to 512MB

·

TS-UWL31:Intel 810

· TS-UWH31:Intel 810 DC-100

·

TS-UWE31:Intel 810E

CHAPTER 2 HARDWARE INSTALLATION

2.1 Transcend TS-UWL31/TS-UWH31/TS-UWE31 Motherboard

All manuals and user guides at all-guides.com

6 HARDWARE INSTALLATION

2.2 Layout of Transcend TS-UWL31/TS-UWH31/TS-UWE31
Motherboard

DIMM1 (64bit 168pin SDRAM Module)

DIMM2 (64bit 168pin SDRAM Module)

PCI Slot1 (PCI1

)

PCI Slot2 (PCI2

)

PCI Slot3 (PCI3

)

PS/2

T:Mouse
B:Ke

y

board

USB

T:Port 1

B:Port 2

ATX Power Connector

KB MOUSE

USB

POWER-FAN

CPU-FAN

KB-AWK

WOL

Panel Connector

CASE-FAN

CMOS-CLR

IrDA

FDC

IDE2

IDE1

JP5

GMCH

COMB

JP2

FWH

JP6

AC97

AMR

Game Port

Line_in

MIC

Intel

ICH

TS-UWH31

Winbond

83627

CD2

CD1

MODEM

Intel

COMA

VGA

Parallel Port

Li Batter

y

VIDEO AUX

Line_out

66/100/133MHz

Pin1

Transcend

JP20

JP15

JP22

All manuals and user guides at all-guides.com

2.3 CPU (Central Processing Unit) Installation

So far you have familiarized yourself with the handling precautions, checked you have all of
the necessary hardware for building your system, inspected the motherboard package contents
and looked at the layout of the motherboard. This chapter will take you step by step through
the process of installing the different hardware devices onto it.

Caution

1. Remember to always make sure the system power is off before installing or removing
any devices.

2. Dont forget the static electricity precautions.

3. Be careful ! Inserting hardware onto your motherboard incorrectly can damage it.

The motherboard has a ZIF Socket 370 which houses the CPU. A fan is necessary for the
CPU to prevent overheating. If there is no fan on it, please purchase one before you turn on
your system.

WARNING! Be sure that sufficient air circulation is available across the processors
passive heatsink. Without sufficient circulation, the processor could overheat and
damage both the processor and the motherboard. You may install an auxiliary fan, if
necessary.

Please follow the steps below to install the CPU:

Step1:
To install the CPU, first turn off your system and remove its cover. Locate the ZIF socket and

open it by first pulling the lever sideways away from the socket then upwards to a 90-degree
right angle. Insert the CPU in the correct direction as shown below. The picture below is for
reference only. You should have a CPU fan to cover the face of the CPU. With the added
weight of the CPU fan, no force is required to insert the CPU. Once completely inserted, close
the sockets lever while holding down the CPU.

HARDWARE INSTALLATION 7

All manuals and user guides at all-guides.com

all-guides.com

Step2:

Next, according to the CPU type you install, set JP15 to short pin1 & pin2 for Intel

®

Celeron

TM

and Pentium ® III FC-PGA series CPU, or set JP15 to short pin2 & pin3 for CYRIX Joshua
series CPU. Connect the CPUs fan cable to the CPU-FAN connector indicated on the diagram
below. Ensure that the cable is connected correctly! It will be obvious which way it fits.

8 HARDWARE INSTALLATION

DIMM1 (64bit 168pin SDRAM Module)

DIMM2 (64bit 168pin SDRAM Module)

PCI Slot1 (PCI1)

PCI Slot2 (PCI2)

PCI Slot3 (PCI3)

PS/2

T:MouseB:Keyboard

USB

T:Port 1B:Port 2

ATX Power Connector

KB MOUSE

USB

POWER-FAN

CPU-FAN

KB-AWK

WOL

Panel Connector

CASE-FAN

CMOS-CLR

IrDA

FDC

IDE2

IDE1

JP5

GMCH

COMB

JP2

FWH

JP6

AC97

AMR

Game Port

Line_in

MIC

IntelICH

TS-UWH31

Winbond83627

CD2

CD1

MODEM

Intel

COMA

VGA

Parallel Port

Li Battery

JP3

JP18

VIDEO AUX

Line_out

66/100MHz

Pin1

AUDIO

Transcend

Socket

370 CPU

(

Top View

)

Socket

370 CPU

(Bottom View)

Socket 370 CPU Installation

Notch

Notch

CPU_FAN

Notch

1

1

INTEL

CYRIX

JP15

All manuals and user guides at all-guides.com

2.4 66/100/133MHz System Configuration

The (JP20) allows you to set the FSB (Front Side Bus) to either AUTO/66/100/133MHz
configurations. And through CPU Host/PCI Clock of Frequency/Voltage Control in the
BIOS Setup menu (please refer to page 47). When JP3 is set to 66MHz, you can select the
system bus frequency from 66MHz to 75MHz. When JP3 is set to 100MHz, you can select the
system bus frequency from 100MHz to 150MHz.

HARDWARE INSTALLATION 9

DIMM1 (64bit 168pin SDRAM Module)

DIMM2 (64bit 168pin SDRAM Module)

PCI Slot1 (PCI1)

PCI Slot2 (PCI2)

PCI Slot3 (PCI3)

PS/2

T:MouseB:Keyboard

USB

T:Port 1B:Port 2

ATX Power Connector

KB MOUSE

USB

POWER-FAN

CPU-FAN

KB-AWK

WOL

Panel Connector

CASE-FAN

CMOS-CLR

IrDA

FDC

IDE2

IDE1

JP5

GMCH

COMB

JP2

FWH

JP6

AC97

AMR

Game Port

Line_in

MIC

IntelICH

TS-UWH31

Winbond83627

CD2

CD1

MODEM

Intel

COMA

VGA

Parallel Port

Li Battery

VIDEO AUX

Line_out

66/100MHz

Pin1

Transcend

66/100/133MHz FSB Configuration Jumper

66MHz

JP20

100MHz

1

1

1

1

1

133MHz

AUTO

Note:
UWL31-Support 66/100MHz
UWH31-Support 66/100MHz
UWE31-Support 66/100/133MHz

All manuals and user guides at all-guides.com

10 HARDWARE INSTALLATION

2.5 Memory Configuration

This motherboard must be installed with PC100 SDRAM DIMM, and can house either one or
two of these modules.

IMPORTANT: Memory speed setup is recommended through the functions in the
Advanced Chipset Features. (Please refer to page 35)

Install memory in any combination as follows:

168-pin DIMM
SDRAM 8,16, 32, 64,128 ,256MB
SDRAM 8,16, 32, 64,128, 256MB
512MB (MAX.)

DIMM Location

DIMM1
DIMM2

Total Memory

168Pin Memory DIMM Sockets

DIMM1 (64bit 168pin SDRAM Module)

DIMM2 (64bit 168pin SDRAM Module)

PCI Slot1 (PCI1)

PCI Slot3 (PCI3)

PS/2

T:MouseB:Keyboard

USB

T:Port 1B:Port 2

ATX Power Connector

KB MOUSE

USB

POWER-FAN

CPU-FAN

KB-AWK

WOL

Panel Connector

CASE-FAN

CMOS-CLR

IrDA

FDC

IDE2

IDE1

JP5

GMCH

JP2

FWH

JP6

AC97

AMR

Game Port

Line_in

MIC

IntelICH

Winbond83627

CD2

CD1

MODEM

Intel

COMA

VGA

Parallel Port

Li Battery

VIDEO AUX

Line_out

Pin1

AUDIO

Transcend

Unbuffered Position

3.3V Position

168-pin Unbuffered SDRAM Module (DIMM1)

168-pin Unbuffered SDRAM Module (DIMM2)

All manuals and user guides at all-guides.com

HARDWARE INSTALLATION 11

2.6 Keyboard Wake Up (3-pin KB-AWK)

This function makes the Keyboard Power Up the system. Set this jumper to Enable if you
would like your Keyboard to Power Up your computer. Then, go to the Integrated Peripherals
in the BIOS Setup Menu (please refer to page 37), and choose the setting you prefer.

Keyboard Wake Up

1

1

Disable

Enable

JP21

KB-AWK

DIMM1 (64bit 168pin SDRAM Module)

DIMM2 (64bit 168pin SDRAM Module)

PCI Slot1 (PCI1)

PCI Slot2 (PCI2)

PCI Slot3 (PCI3)

PS/2

T:MouseB:Keyboard

USB

T:Port 1B:Port 2

ATX Power Connector

KB MOUSE

USB

POWER-FAN

CPU-FAN

KB-AWK

WOL

Panel Connector

CASE-FAN

CMOS-CLR

FDC

IDE2

IDE1

JP5

GMCH

COMB

JP2

FWH

JP6

AC97

AMR

Game Port

Line_in

MIC

IntelICH

TS-UWH31

Winbond83627

CD2

CD1

MODEM

Intel

COMA

VGA

Parallel Port

Li Battery

VIDEO AUX

Line_out

66/100MHz

Pin1

Transcend

All manuals and user guides at all-guides.com

12 HARDWARE INSTALLATION

IDE Connectors

DIMM1 (64bit 168pin SDRAM Module)

DIMM2 (64bit 168pin SDRAM Module)

PCI Slot1 (PCI1)

PCI Slot2 (PCI2)

PCI Slot3 (PCI3)

PS/2

T:MouseB:Keyboard

USB

T:Port 1B:Port 2

ATX Power Connector

KB MOUSE

USB

POWER-FAN

CPU-FAN

KB-AWK

WOL

Panel Connector

CASE-FAN

CMOS-CLR

IrDA

FDC

IDE2

IDE1

JP5

GMCH

COMB

JP2

FWH

JP6

AC97

AMR

Game Port

Line_in

MIC

IntelICH

TS-UWH31

Winbond83627

CD2

CD1

MODEM

Intel

COMA

VGA

Parallel Port

Li Battery

VIDEO AUX

Line_out

66/100MHz

Pin1

Transcend

Primary IDE Connector

(Blue color)

Second IDE Connector

(Black Color)

IDE1

IDE2

PIN1

PIN1

IDE Connector

2.7 Primary / Secondary IDE Connectors (Two 40-1-pin IDE)

This motherboard supports two 40-pin IDE connectors marked as IDE1 (primary channel)
and IDE2 (secondary channel). Each channel supports two IDE devices, making a total of
four devices.
Connect your Hard Disk (the main one if you are using more than one) to the Master connector
(at the end of the cable) and connect it to the IDE1 (see important note below). If your HDD
supports Ultra DMA/66, you must use an 80-wire cable, otherwise the HDD wont be able to
reach this speed.
If you intend to operate two IDE devices from the same channel, one device must be set to
master mode, the other to slave mode. A Hard Disk, CD ROM or other IDE device can
have either setting, depending on devices jumper. Please refer to the devices manual for
more information.

NOTE:

The Connectors must be attached to the IDE channels the right way round. Make
sure that the red stripe on one edge of the ribbon cable (this may be faint and could
also be a dotted line) is the nearest to PIN 1 (on the left as the motherboard is shown
in the picture below).

All manuals and user guides at all-guides.com

all-guides.com

HARDWARE INSTALLATION 13

Floppy Disk Driver Connector

DIMM1 (64bit 168pin SDRAM Module)

DIMM2 (64bit 168pin SDRAM Module)

PCI Slot1 (PCI1)

PCI Slot2 (PCI2)

PCI Slot3 (PCI3)

PS/2

T:MouseB:Keyboard

USB

T:Port 1B:Port 2

ATX Power Connector

KB MOUSE

USB

POWER-FAN

CPU-FAN

KB-AWK

WOL

Panel Connector

CASE-FAN

CMOS-CLR

IrDA

FDC

IDE2

IDE1

JP5

GMCH

COMB

JP2

FWH

JP6

AC97

AMR

Game Port

Line_in

MIC

IntelICH

TS-UWH31

Winbond83627

CD2

CD1

MODEM

Intel

COMA

VGA

Parallel Port

Li Battery

VIDEO AUX

Line_out

66/100MHz

Pin1

Transcend

PIN1

FDD Connector

.,+

2.8 Floppy Disk Drive Connector (34-pin FDC)

This connector supports the floppy disk drive ribbon cable which is one of the items in your
motherboard package. After connecting the single end to the board, connect the two plugs at
the other end to the floppy drives. Remember, as in the last section, the red stripe on the
edge of the ribbon cable must be the nearest to PIN 1, otherwise your connection wont work.
This means it be on the left as the motherboard is shown below.

All manuals and user guides at all-guides.com

14 HARDWARE INSTALLATION

2.9 Fan Power Connectors

There are three fan power connectors on the motherboard: CPU-FAN, POWER-FAN, and
CASE-FAN. Each connector provides +12V power. The cables can only be attached a certain
way: If you try to put them in the wrong way, they wont fit. These connectors support cooling
fans of 500 mA (6W) or less.

DIMM1 (64bit 168pin SDRAM Module)

DIMM2 (64bit 168pin SDRAM Module)

PCI Slot1 (PCI1)

PCI Slot2 (PCI2)

PCI Slot3 (PCI3)

PS/2

T:MouseB:Keyboard

USB

T:Port 1B:Port 2

ATX Power Connector

KB MOUSE

USB

POWER-FAN

CPU-FAN

KB-AWK

WOL

Panel Connector

CASE-FAN

CMOS-CLR

IrDA

FDC

IDE2

IDE1

JP5

GMCH

COMB

JP2

FWH

JP6

AC97

AMR

Game Port

Line_in

MIC

IntelICH

TS-UWH31

Winbond83627

CD2

CD1

MODEM

Intel

COMA

VGA

Parallel Port

Li Battery

VIDEO AUX

Line_out

66/100MHz

Pin1

Transcend

POWER-FAN

CPU-FAN

CASE-FAN

Fan Power Connectors

Rotation

+12V

GND

FAN

All manuals and user guides at all-guides.com

2.10 Wake-on-LAN Connector (3-pin WOL)

This connector connects to LAN cards with a Wake-on-LAN output. The system can be
Powered Up when a wakeup packet or signal is received from the LAN card.

NOTE:This function requires that the Wake-Up by PCI & WOL function in the Power
Management Setup is set to Enabled and that your system has an ATX power supply
with at least 720mA +5V standby power.

HARDWARE INSTALLATION 15

DIMM1 (64bit 168pin SDRAM Module)

DIMM2 (64bit 168pin SDRAM Module)

PCI Slot1 (PCI1)

PCI Slot2 (PCI2)

PCI Slot3 (PCI3)

PS/2

T:MouseB:Keyboard

USB

T:Port 1B:Port 2

ATX Power Connector

KB MOUSE

USB

POWER-FAN

CPU-FAN

KB-AWK

WOL

Panel Connector

CASE-FAN

CMOS-CLR

IrDA

FDC

IDE2

IDE1

JP5

GMCH

COMB

JP2

FWH

JP6

AC97

AMR

Game Port

Line_in

MIC

IntelICH

TS-UWH31

Winbond83627

CD2

CD1

MODEM

Intel

COMA

VGA

Parallel Port

Li Battery

VIDEO AUX

Line_out

66/100MHz

AUDIO

Transcend

Wake-on-LAN Connector

+5V Standby
GND

PME

WOL

All manuals and user guides at all-guides.com

2.11 IrDA-Compliant Infrared Module Connector (10-pin IrDA)

The IrDA connector can be configured to support a wireless infrared module. With this module
and application software such as Laplink or Win95 Direct Cable Connection, users can transfer
files to or from laptops (notebooks), PDAs and printers. You must also configure the setting
through UART Mode Select in the Integrated Peripherals (please refer to page 39) to
select IrDA. Connect the Standard IR (SIR) device to the onboard SIR connector according
to the pin definitions. An optional Consumer Infrared (CIR) set connects to the CIR and SIR
connectors simultaneously for both wireless transmitting and remote control functions through
one external infrared module.

16 HARDWARE INSTALLATION

DIMM1 (64bit 168pin SDRAM Module)

DIMM2 (64bit 168pin SDRAM Module)

PCI Slot1 (PCI1)

PCI Slot2 (PCI2)

PCI Slot3 (PCI3)

PS/2

T:MouseB:Keyboard

USB

T:Port 1B:Port 2

ATX Power Connector

KB MOUSE

USB

POWER-FAN

CPU-FAN

KB-AWK

WOL

Panel Connector

CASE-FAN

CMOS-CLR

IrDA

FDC

IDE2

IDE1

JP5

GMCH

COMB

JP2

FWH

JP6

AC97

AMR

Game Port

Line_in

MIC

IntelICH

TS-UWH31

Winbond83627

CD2

CD1

MODEM

Intel

COMA

VGA

Parallel Port

Li Battery

VIDEO AUX

Line_out

66/100MHz

Pin1

AUDIO

Transcend

IrDA Connector

IrDA

+5V

IRRX

NC

GND

IRTX

NC

5VSB

CIRRX

NC

NC

12

910

CIRSIR

All manuals and user guides at all-guides.com

HARDWARE INSTALLATION 17

2.12 Panel Connectors

Power LED Lead (3-pin POWER LED)

This 3-pin connector attaches to the power LED.

Pin1 : +5V
Pin2 : NC
Pin3 : GND

Keylock Lead (2-pin KEYLOCK)

Use the keylock to enable or disable the keyboard.

Pin4 : KEYLOCK
Pin5 : GND

Speaker Lead (4-pin SPEAKER)

This 4-pin connector connects to the case-mounted speaker.

Pin7 : +5V
Pin8 : GND
Pin9 : NC
PIN10: SPK

DIMM1 (64bit 168pin SDRAM Module)

DIMM2 (64bit 168pin SDRAM Module)

PCI Slot1 (PCI1)

PCI Slot2 (PCI2)

PCI Slot3 (PCI3)

PS/2

T:MouseB:Keyboard

USB

T:Port 1B:Port 2

ATX Power Connector

KB MOUSE

USB

POWER-FAN

CPU-FAN

KB-AWK

WOL

Panel Connector

CASE-FAN

CMOS-CLR

IrDA

FDC

IDE2

IDE1

JP5

GMCH

COMB

JP2

FWH

JP6

AC97

AMR

Game Port

Line_in

MIC

IntelICH

TS-UWH31

Winbond83627

CD2

CD1

MODEM

Intel

COMA

VGA

Parallel Port

Li Battery

VIDEO AUX

Line_out

66/100MHz

Pin1

Transcend

Panel Connector

++

S_LED

HDD_LED

RESET

SOFT_OFF

SPEAKER

++

KEY LOCK

1

10

20

11

POWER LED

All manuals and user guides at all-guides.com

all-guides.com

18 HARDWARE INSTALLATION

Suspend Mode LED Lead (2-pin S_LED)

The S_LED will light when the suspened mode works.

Pin11 : +5V
Pin12 : GND

Hard disk LED Lead (2-pin HDD_LED)

This 2-pin connector connects to LED of hard disk. The LED lights up when a HDD is active.

Pin13 : +5V
Pin14 : GND

Reset Switch Lead (2-pin RESET)

This 2-pin connector connects to the case-mounted reset switch for rebooting your computer
without turning on your power switch.

Pin17 & Pin18

Software Power-Off Lead (2-pin SOFT_OFF)

Attach the SOFT_OFF switch of the panel to this connector. Use the switch to Power On/Off

your system.

Pin19 & Pin20

All manuals and user guides at all-guides.com

2.13 Power Connector (20-pin PWR-CONN)

Make sure you plug the ATX power supply connector in the right direction. The pin definition
is shown below. Make sure that your ATX power supply can support at least 720mA +5V

standby power for the Advanced Configuration and Power Interface (ACPI) functions.

HARDWARE INSTALLATION 19

DIMM1 (64bit 168pin SDRAM Module)

DIMM2 (64bit 168pin SDRAM Module)

PCI Slot1 (PCI1)

PCI Slot2 (PCI2)

PCI Slot3 (PCI3)

PS/2

T:MouseB:Keyboard

USB

T:Port 1B:Port 2

ATX Power Connector

KB MOUSE

USB

POWER-FAN

CPU-FAN

KB-AWK

WOL

Panel Connector

CASE-FAN

CMOS-CLR

IrDA

FDC

IDE2

IDE1

JP5

GMCH

COMB

JP2

FWH

JP6

AC97

AMR

Game Port

Line_in

MIC

IntelICH

TS-UWH31

Winbond83627

CD2

CD1

MODEM

Intel

COMA

VGA

Parallel Port

Li Battery

VIDEO AUX

Line_out

66/100MHz

Pin1

Transcend

Power Connector

PSON# : Power Supply on

Power Good

+3.3V

+3.3V

GND

+5.0V

GND

+5.0V

GND

+5.0V Standby

+12.0V

+3.3V

-12.0V

GND

PSON#

-5.0V

+5.0V

+5.0V

PWR-CONN

GND

GND

GND

All manuals and user guides at all-guides.com

20 HARDWARE INSTALLATION

2.14 External Back Panel I/O Ports

There are 10 kinds of external connectors on the motherboard.
The view angle of drawing shown here is from the back panel of the housing.

1. PS/2 Mouse Port (Green 6-pin MOUSE)
The onboard PS3/2 Mouse port is a 6-pin Mini-Din connector marked MOUSE.

2. PS/2 Keyboard Port (Purple 6-pin KB)
The onboard PS/2 Keyboard port is a 6-pin Mini-Din connector marked KB.

3. USB (Universal Serial Bus) Ports 1 & 2 (Black two 4-pin USBs)
You plug any USB device into the USB ports. The motherboard contains two USB
ports, which are marked USB.

4. Parallel Port (Burgundy 25-pin PRN)
The onboard printer port is a 25-pin D-type connector marked PRN.

5. Serial Port COMA (Turquoise 9-pin COMA)
The first onboard serial port is a 9-pin D-type connector marked COMA. (The second
onboard serial port COMB is a 10-pin header connector. Please refer to page 25 for
the location and details).

6. Display VGA Port (Blue 15-pin VGA)
The onboard VGA port is a 15-pin D-type connector marked VGA.

7. Game Port / MIDI Port (Gold 15-pin GAME)
The onboard Game port / MIDI Port is a 15-pin D-type connector marked GAME.

8. Line-out (Lime Green 1/8 LINE-OUT)
The onboard Line-out connector is a 1/8 stereo audio jack marked LINE-OUT.

9. Line-in (Light blue 1/8 LINE-IN)
The onboard Line-in connector is a 1/8 stereo audio jack marked LINE-IN.

10. MIC-in (Pink 1/8 MIC)
The onboard MIC-in connector is a 1/8 stereo audio jack connector marked MIC.

All manuals and user guides at all-guides.com

HARDWARE INSTALLATION 21

2.15 Clear CMOS Jumper (3-pin JP5)

To clear the CMOS data, you should turn off your computers power and short pin1 and
pin2 in JP5.

DIMM1 (64bit 168pin SDRAM Module)

DIMM2 (64bit 168pin SDRAM Module)

PCI Slot1 (PCI1)

PCI Slot2 (PCI2)

PCI Slot3 (PCI3)

PS/2

T:MouseB:Keyboard

USB

T:Port 1B:Port 2

ATX Power Connector

KB MOUSE

USB

POWER-FAN

CPU-FAN

KB-AWK

WOL

Panel Connector

CASE-FAN

CMOS-CLR

IrDA

FDC

IDE2

IDE1

JP5

GMCH

COMB

JP2

FWH

JP6

AC97

AMR

Game Port

Line_in

MIC

IntelICH

TS-UWH31

Winbond83627

CD2

CD1

MODEM

Intel

COMA

VGA

Parallel Port

Li Battery

VIDEO AUX

Line_out

66/100MHz

Pin1

Transcend

Clear CMOS Jumper

1

1

CMOS_CLR

DEFAULT

1

JP5

CMOS_CLR

1. PS/2 Mouse

2. PS/2 Keyboard

4. Parallet Port
(Printer)

3. USB2

5. COMA 6. VGA Port

7. Game/MIDI Port

8. Line-out

9. Line-in

3. USB1

10. MIC-in

External Back Panel I/O Ports

All manuals and user guides at all-guides.com

22 HARDWARE INSTALLATION

2.16 FWH Lock Jumper (JP6)

DIMM1 (64bit 168pin SDRAM Module)

DIMM2 (64bit 168pin SDRAM Module)

PCI Slot1 (PCI1)

PCI Slot2 (PCI2)

PCI Slot3 (PCI3)

PS/2

T:MouseB:Keyboard

USB

T:Port 1B:Port 2

ATX Power Connector

KB MOUSE

USB

POWER-FAN

CPU-FAN

KB-AWK

WOL

Panel Connector

CASE-FAN

CMOS-CLR

IrDA

FDC

IDE2

IDE1

JP5

GMCH

COMB

JP2

FWH

JP6

AC97

AMR

Game Port

Line_in

MIC

IntelICH

TS-UWH31

Winbond83627

CD2

CD1

MODEM

Intel

COMA

VGA

Parallel Port

Li Battery

VIDEO AUX

Line_out

66/100MHz

Pin1

Transcend

LOCK

1

JP6

FWH Lock

FWH Lock Jumper

OPEN

SHORT

UNLOCK

This jumper controls the Firmware Hub (FWH) locking function. When set to LOCK, it prevents
programming or block erase to the top block of FWH. There are 8 blocks of addressable
space controlled by the FWH. The top block (block 7, also called Boot Block) stores some
critical codes. To guard against accidents (such as a virus, program bug etc.), we recommend
that you lock this block. Even if other blocks were to be erased, you could still recover your
system easily by following the 2 steps below:

1. Reboot with DOS (95/98) system boot floppy disk.

2. Reflash BIOS according to section 5.3, Step 5 (Page 61).

All manuals and user guides at all-guides.com

all-guides.com

HARDWARE INSTALLATION 23

2.17 Onboard Audio Setting (JP18)

DIMM1 (64bit 168pin SDRAM Module)

DIMM2 (64bit 168pin SDRAM Module)

PCI Slot1 (PCI1)

PCI Slot2 (PCI2)

PCI Slot3 (PCI3)

PS/2

T:MouseB:Keyboard

USB

T:Port 1B:Port 2

ATX Power Connector

KB MOUSE

USB

POWER-FAN

CPU-FAN

KB-AWK

WOL

Panel Connector

CASE-FAN

CMOS-CLR

IrDA

FDC

IDE2

IDE1

JP5

GMCH

COMB

JP2

FWH

JP6

AC97

AMR

Game Port

Line_in

MIC

IntelICH

TS-UWH31

Winbond83627

CD2

CD1

MODEM

Intel

COMA

VGA

Parallel Port

Li Battery

VIDEO AUX

Line_out

66/100MHz

Transcend

Audio Selection Jumper

AMR Slot

Onboard
Audio
Setting

1 2 3

JP18

For the external AMR card, the onboard audio CODEC can be enabled or disabled via this
jumper. Please disable the onboard audio CODEC, If you want to use a PCI Sound Card or
an AMR Card.

1
2
3

Enable

1
2
3

Disable

All manuals and user guides at all-guides.com

24 HARDWARE INSTALLATION

2.18 Internal Audio Connectors

These connectors allow you to receive stereo audio input from sound sources such as a CD-
ROM, TV tuner, or MPEG card. The MODEM connector allows the onboard audio to interface
a voice modem card with a matched connector. It also allows the sharing of mono_in (such as
a phone) and mono_out (such as a speaker) between the onboard audio and the voice modem
card.

DIMM1 (64bit 168pin SDRAM Module)

DIMM2 (64bit 168pin SDRAM Module)

PCI Slot1 (PCI1)

PCI Slot2 (PCI2)

PCI Slot3 (PCI3)

PS/2

T:MouseB:Keyboard

USB

T:Port 1B:Port 2

ATX Power Connector

KB MOUSE

USB

POWER-FAN

CPU-FAN

KB-AWK

WOL

Panel Connector

CASE-FAN

CMOS-CLR

IrDA

FDC

IDE2

IDE1

JP5

GMCH

COMB

JP2

FWH

JP6

AC97

AMR

Game Port

Line_in

MIC

IntelICH

TS-UWH31

Winbond83627

CD2

CD1

MODEM

Intel

COMA

VGA

Parallel Port

Li Battery

VIDEO AUX

Line_out

66/100MHz

Pin1

Transcend

Internal Audio Connecotrs

GND

CD2 CD1

MODEMVIDEO AUX

Left Audio Channel
Right Audio Channel

(

Black

)

(

White

)

(

Green

)

GND

Left Audio Channel

Right Audio Channel

GND

Left Audio Channel

Right Audio Channel

GND

Left Audio Channel

Right Audio Channel

GND

Modem-In
(Voice to Modem)

Modem-Out
(Voice from Modem)

All manuals and user guides at all-guides.com

HARDWARE INSTALLATION 25

You can use the provided serial port bracket to add a serial port for additional serial devices.
Regarding the onboard COMA, please refer to Section 2.14 External Back Panel I/O Ports
(page 20).

DIMM1 (64bit 168pin SDRAM Module)

DIMM2 (64bit 168pin SDRAM Module)

PCI Slot1 (PCI1)

PCI Slot2 (PCI2)

PCI Slot3 (PCI3)

PS/2

T:MouseB:Keyboard

USB

T:Port 1B:Port 2

ATX Power Connector

KB MOUSE

USB

POWER-FAN

CPU-FAN

KB-AWK

WOL

Panel Connector

CASE-FAN

CMOS-CLR

IrDA

FDC

IDE2

IDE1

JP5

GMCH

COMB

JP2

FWH

JP6

AC97

AMR

Game Port

Line_in

MIC

IntelICH

TS-UWH31

Winbond83627

CD2

CD1

MODEM

Intel

COMA

VGA

Parallel Port

Li Battery

VIDEO AUX

Line_out

66/100MHz

Pin1

Transcend

Internal Serial Port Connecotr COMB

COMB

DCD

SOUT

SIN

DTR

GND

DSR

CTS

RTS

RI

NC

12

910

2.19 Internal Serial Port Connector COMB

All manuals and user guides at all-guides.com

26 HARDWARE INSTALLATION

2.20 VIO Adjust Jumper

This function allows you to increase VCC3 from 3.5V (default) to 3.6V for the heavy loading of
the PCI slots.

DIMM1 (64bit 168pin SDRAM Module)

DIMM2 (64bit 168pin SDRAM Module)

PCI Slot1 (PCI1)

PCI Slot2 (PCI2)

PCI Slot3 (PCI3)

PS/2

T:MouseB:Keyboard

USB

T:Port 1B:Port 2

ATX Power Connector

KB MOUSE

USB

POWER-FAN

CPU-FAN

KB-AWK

WOL

Panel Connector

CASE-FAN

CMOS-CLR

IrDA

FDC

IDE2

IDE1

JP5

GMCH

COMB

JP2

FWH

JP6

AC97

AMR

Game Port

Line_in

MIC

IntelICH

TS-UWH31

Winbond83627

CD2

CD1

MODEM

Intel

COMA

VGA

Parallel Port

Li Battery

VIDEO AUX

Line_out

66/100MHz

Pin1

Transcend

VIO Adjust

Short=3.6V

Open=3.5V(default)

JP22

Congratulations, you have now completed Hardware Setup! This means that you can move
on to Chapter 3, the BIOS Setup section and turn on your PC.

All manuals and user guides at all-guides.com

BIOS SETUP 27

CHAPTER 3 BIOS SETUP

3.1 BIOS Setup

Award BIOS has a built-in Setup program that allows users to modify the basic system
configuration. This information is stored in CMOS RAM, so it can retain the Setup information
when the power is turned off. When the battery of CMOS fails, it will cause the data to be lost.
If that happens, please set up your configuration parameters again after replacing the battery.
Please refer to Section 1.1, Essential Handling Precautions (Page 1).

3.2 The Main Menu

As you turn on or reboot the system, the BIOS is immediately activated. It will read the system
configuration information, and check the system through Power On Self Test (POST). During
the POST process, press the [Del] key, and you can enter the Award BIOS configuration
system. The following screen will appear.

In the Award BIOS system, you can use the arrows (

) to highlight an item, and

press the [Enter] key to enter the sub-menu. The following keys help you navigate in Setup.
[Esc] Main Menu: Quit and not save changes into CMOS RAM

Other pages: Exit current page and return to Main Menu
[PgUp] Increase the numeric value or make changes
[PgDn] Decrease the numeric value or make changes

All manuals and user guides at all-guides.com

all-guides.com

28 BIOS SETUP

[+] Increase the numeric value or make changes
[-] Decrease the numeric value or make changes
[F1] General help on setup navigation keys
[F5] Load previous values from CMOS
[F6] Load the Fail-Safe Defaults from BIOS default table
[F7] Load the Optimized Defaults
[F10] Save all the CMOS changes, and exit

The Following is a brief summary of each setup category.

• Standard CMOS Features

Options in the original PC AT-compatible BIOS

• Advanced BIOS Features

Award enhanced BIOS options

• Advanced Chipset Features

Available options specific to your system Chipset

• Integrated Peripherals

I/O subsystems that depend on the integrated peripheral controllers in your system

• Power Management Setup

Advanced Power Management(APM) and Advanced Configuration and Power Interface
(ACPI) options

• PnP/PCI Configurations

Plug and Play standard and PCI Local Bus configuration options

• PC Health Status

To display the fan status, CPU temperature, system temperature, etc.., and provide the
temperature monitoring option

• Frequency / Voltage Control

To control the frequency and voltage of the CPU

• Load Fail-Safe Defaults

To load the most basic BIOS default values required for your system to operate

• Load Optimized Defaults

To load the BIOS default values that are factory settings for optimal system performance.

All manuals and user guides at all-guides.com

BIOS SETUP 29

3.3 Standard CMOS Features

• Set Supervisor / User Password

To change, set, or disable a password

• Save & Exit Setup

To save settings in nonvolatile CMOS RAM and exit Setup

• Exit Without Saving

To abandon all changes and exit Setup

• Date (mm:dd:yy) / Time (hh:mm:ss)

Highlight the items and use [PageUp] / [PageDown] to change the value of Date/Time.

• IDE Primary / Secondary Master / Slave

Press [Enter] to enter the sub menu.

All manuals and user guides at all-guides.com

30 BIOS SETUP

• IDE HDD Auto-Detection : Detect the HDD on this channel. If the detection is

successful, it fills the remaining fields on this menu.

• IDE Primary / Secondary Master / Slave : We recommand that you select type AUTO

for all drives. The BIOS can automatically detect the specifications during POST
(Power On Self Test) while the system boots. You can also choose Manual to set
the specifications by yourself. As to None, it means there is no device installed on
this IDE channel.

• Access Mode : Normal, LBA, Large, or Auto.

- Normal : Maximum number of cylinders, heads, and sectors supported are 1024,
16, and 63 respectively.

-LBA (Logical Block Addressing): During drive access, the IDE controller transorms
the data address described by sector, head, and cylinder number into a physical
block address. This will significantly improve data transfer rates for drives with
more than 1024 cylinders.

- Large : For drives that do not support LBA and have more than 1024 cylinders.

- Auto : The BIOS automatically determines the optimal access mode.

• Capacity : Disk drive capacity. Note that this size is slighty greater than the size of

formatted disk given by a disk-checking program.

• Cylinder : Number of cylinders

• Head : Number of heads

All manuals and user guides at all-guides.com

BIOS SETUP 31

• Precomp : Write precompensation cylinder

• Landing Zone : Landing zone

• Sector : Number of sectors

•

Drive A / Drive B

Select the correct types of diskette drive(s) installed in the computer.

- None : No diskette drive installed

- 360K, 5.25 in. : 5-1/4 inch standard drive; 360KB

- 1.2M, 5.25 in. : 5-1/4 inch high-density drive; 1.2MB

- 720K, 3.5 in. : 3-1/2 inch double-sided drive; 720KB

- 1.44M, 3.5 in. : 3-1/2 inch double-sided drive; 1.44MB

- 2.88M, 3.5 in. : 3-1/2 inch double-sided drive; 2.88MB

•

Floppy Mode 3 Support

Supports some particular Japanese floppy drives (3-1/2 inch drive with 1.2MB).

•

Video

Select the type of primary video subsystem in your computer. The BIOS will detect the
correct video type automatically. The BIOS supports a secondary video subsystem, but do
not select it in this Setup.

- EGA/VGA : Enhanced Graphics Adapter/Video Graphics Array. For EGA, VGA, SEGA,
SVGA or PGA monitor adapters.

- CGA 40 : Color Graphics Adapter, powers up in 40-column mode.

- CGA 80 : Color Graphics Adapter, powers up in 80-column mode.

- MONO : Monochrome adapter, including high resolution.

•

Halt On

During the Power On Self Test (POST), the computer stops if the BIOS detects a hardware
error. You can set the BIOS to ignore certain errors during POST and continue the boot-up
process. The followings are the selections.

- All Errors : If the BIOS detects any non-fatal errors, POST stops and prompts you to
take corrective action.

- No Errors : POST does not stop for any error.

- All, But Keyboard : If the BIOS detects any non-fatal errors except keyboard, POST
stops and prompts you to take corrective action.

All manuals and user guides at all-guides.com

32 BIOS SETUP

- All, But Diskette : If the BIOS detects any non-fatal error except floppy disk drive,
POST stops and prompts you to take corrective action.

- All, But Disk / Key : If the BIOS detects any non-fatal error except floppy disk drive or
keyboard, POST stops and prompts you to take corrective
action.

3.4 Advanced BIOS Features

This Advanced BIOS Features option allows you to improve your system performance and
set up system features according to your preference.

•

Virus Warning

When this function is enabled, you will receive a warning message if a program (specifically,
a virus) attempts to write to the boot sector or the partition table of the hard disk drive. You
should then execute an anti-virus program. Keep in mind that this feature protects the
boot sector only, not the entire hard drive.

NOTE: Many disk diagnostic programs that access the boot sector table can trigger
the virus warning message. If you plan to run such a program, we recommend that
you first disable the virus warning.

All manuals and user guides at all-guides.com

all-guides.com

BIOS SETUP 33

• CPU Internal Cache / External Cache

Cache memory is additional memory that is much faster than conventional DRAM (system
memory). CPUs from 486-type and up contain internal cache memory. Most, but not all,
modern PCs have additional (external) cache memory. When the CPU requests data, the
system transfers the requested data from the main DRAM into cache memory for even
faster access by the CPU. The External Cache field may not appear if your system does
not have external cache memory.

• CPU L2 Cache ECC Checking

Select Enabled to make sure the data is accurate.

• Quick Power On Self Test

Select Enabled to reduce the amount of time required to run the Power On Self Test
(POST). The Quick POST skips certain steps. We recommend that you normally disable
Quick POST. Its better to find a problem during POST than to lose data during your work.

• First / Second / Third / Other Boot Device

The original IBM PCs load the DOS operating system from drive A (floppy disk). So, IBM
PC-compatible systems are designed to search for an operating system first on drive A,
and then on drive C (hard disk). However, the BIOS attempts to load the operating system
from the devices in the sequence selected in these fields. In addition to the traditional
drives A (Floppy) and C (HDD-0), options include HDD-1, HDD-2, HDD-3, and
CD-ROM; plus a SCSI hard drive, a LS/ZIP drive and a LAN drive. If your boot
device is not included in the list, you can set the Boot Other Device field to Enabled,
and let the system detect the drive automatically.

• Swap Floppy Drive

This field is effective only in systems with two floppy drives. Selecting Enabled assigns
physical drive B to logical drive A, and physical drive A to logical drive B.

• Boot Up Floppy Seek

When you select Enabled, the BIOS tests (seeks) floppy drives to determine whether

they have 40 or 80 tracks. Only 360-KB floppy drives have 40 tracks; drives with 720KB,

1.2MB, and 1.44MB capacity all have 80 tracks. Because very few modern PCs have 40-
track floppy drives, we recommend that you set this field to Disabled to save time.

All manuals and user guides at all-guides.com

34 BIOS SETUP

• Boot Up NumLock Status

Toggle between On and Off to control the state of the NumLock key when the system
boots. When toggled On, the numeric keypad generates numbers instead of controlling
cursor operations.

• Gate A20 Option

Choose Fast (default) or Normal. Fast allows RAM access above 1MB to use the fast
Gate A20 line.

•

Typematic Rate Setting

When this function is disabled, the following two items (Typematic Rate and Typematic
Delay) are irrelevant. Keystrokes repeat at a rate determined by the keyboard controller in
your system. When this function is enabled, you can select a typematic rate and typematic
delay.

•

Typematic Rate (Chars / Sec)

When the Typematic Rate setting is enabled, you can select a typematic rate (the rate at
which character repeats) when you hold down a key of 6, 8, 10, 12, 15, 20, 24
or 30 characters per second.

•

Typematic Delay (Msec)

When the Typematic Delay setting is enabled, you can select a typematic delay (the delay
before key strokes begin to repeat) of 250, 500, 750 or 1000 milliseconds.

•

Security Option

If you have set a password, you can select whether the password is required while the
system boots, or only when you enter Setup.

•

OS Select for DRAM > 64MB

Select OS2 only if you are running OS/2 operating system with more than 64 MB of RAM
on your system.

•

Report No FDD For WIN 95

Select Yes to release IRQ6 when there is no floppy disk drive, for compatibility with WIN

95 logo certification.

•

Delay For HDD (Secs)

Generally, you can set this field as 0. But for some old Hard Disk Drivers, you may need

to increase the delay time for BIOS to detect the right type of them.

All manuals and user guides at all-guides.com

•

SDRAM CAS Latency Time

This controls the SDRAM performance: default is 3 clocks. If your SDRAM DIMM
specification is 2 CAS latency, change 3 to 2 for better performance.

•

SDRAM Cycle Time Tras / Trc

Select the number of SDRAM clocks used per access cycle.

•

SDRAM RAS-to-CAS Delay

This controls the latency between SDRAM active command and the read/write command.
Leave it on the default setting.

•

SDRAM RAS Precharge Time

This controls the idle clocks after issuing a precharge command to SDRAM. Leave it on
the default setting.

•

System BIOS Cacheable

Selecting Enabled allows caching of the system BIOS. This action can increase system
performance.

•

Video BIOS Cacheable

Selecting Enabled allows caching of the video BIOS. This action can increase system
performance.

BIOS SETUP 35

3.5 Advanced Chipset Features

This option will change the values of the chipset registers and the system setting will alter.
Do not change any values if you are unfamiliar with the chipset.

All manuals and user guides at all-guides.com

36 BIOS SETUP

•

Memory Hole At 15M-16M

Enabling this feature reserves memory address space (between15 and 16MB) to ISA
expansion cards that specifically require this setting. This makes between15 and 16MB of
memory unavailable to the system. Expansion cards can only access memory up to
16MB. The default setting is Disabled.

•

Delayed Transaction

PCI access speed is faster than ISA. So PCI will release the master bus to the ISA interface
for accessing data. Then the master bus control will go back to PCI again.

•

On-Chip Video Window Size

You can select the size of mapped memory for the VGA / AGP driver to use. The choices:
64MB, 32MB, and Disabled.

•

Local Memory Frequency

You can select the local memory frequency to 100MHz or 133MHz.

Onboard Display Cache Setting

This field is displayed only if there is onboard display cache on the system.

• CAS# Latency

Set the CAS Latency of the onboard display cache memory.

• Paging Mode Control

Open or close the paging mode control of the onboard display cache memory.

• RAS-to-CAS Override

The default value, by CAS# LT, will let this field have the same configuration as
the value of the field CAS# Latency. Another option, Override(2), will set the
value of this field to be 2.

• RAS# Timing

Set the RAS timing of the onboard display cache memory.

• RAS# Precharge Timing

Set the RAS precharge timing of the onboard display cache memory.

• •

• •

• CPU Vcore Select

You can use this function to adjust CPU core woking voltage up to 10%. For normal use,
we suggest that you set this funcion as default.

All manuals and user guides at all-guides.com

• •

• •

• On-Chip Primary / Secondary PCI IDE

The chipset contains a PCI IDE interface which supports two IDE channels. Select Enabled

to activate the first and/or second IDE interface. Select Disabled to deactivate this

interface, when you install a primary and/or secondary add-in IDE interface.

• •

• •

• IDE Primary/Secondary Master/Slave PIO

The four IDE PIO (Programmed Input/Output) fields let you set a PIO mode (0-4) for each

of the four IDE devices that the onboard IDE interface supports. Mode 0 through 4 provide

successively increased performance. In Auto mode, the system automatically determines

the best mode for each device.

BIOS SETUP 37

3.6 Integrated Peripherals

This option will load the default BIOS values. Choose the option and the following message
appears.

All manuals and user guides at all-guides.com

all-guides.com

38 BIOS SETUP

• •

• •

• IDE Primary/Secondary Master/Slave UDMA

Ultra DMA/33(66) implementation is possible only if your IDE hard drive can support, and

the operating environment includes a DMA driver (Windows 95 OSR2 or a third-party IDE

bus master driver). If both your hard disk drive and your system software can support Ultra

DMA/33(66), select Auto to enable BIOS support.

• •

• •

• USB Controller

Select Enabled if your system contains a Universal Serial Bus (USB) controller and USB

peripheral(s).

• •

• •

• USB Keyboard Support

Select Enabled if you use a USB Keyboard.

• Init Display First

This item allows you to decide whether to activate either the PCI Slot or the AGP first.

• AC97 Audio / Modem

If you select Enabled, BIOS will detect whether you are using any audio / modem devices.

When an audio / modem device is detected, the onboard audio / modem

controller will be enabled. If you want to use your own audio / modem card, set these fields

to Disabled. If not, set these fields Enabled.

• •

• •

• IDE HDD Block Mode

Block Mode is also called Block Transfer, Multiple Commands, or Multiple Sector Read /

Write. If your IDE hard drive supports Block Mode (most new drives do), select Enabled

for automatic detection of the optimal number of Block Read / Write per sector the drive

can support.

• •

• •

• Power On Function

- Password : Power On only if you key in correct password.

- Hot Key : You can use the hot key to Power On the system.

- Mouse Left : Power On with the Mouse Left Button.

- Mouse Right : Power On with the Mouse Right Button.

All manuals and user guides at all-guides.com

BIOS SETUP 39

- Any Key : Press any key to Power On the system.

- Button only : Power On only by pushing the button on the case (Default)- Keyboard 98 :
You can Power On the system by pushing the Power-On key of Keyboard 98.

• •

• •

• KB Power On Password

Enter the Power On Passward here. Activated only when Password item is selected
in the Power On Function Menu.
NOTE: If you want to use this function, please make sure that the KB-AWK jumper
is set to Enabled.

• •

• •

• Hot Key Power On

Choose [CTRL] +[ F1] ~ [F10] as a hot key to Power On the system. Activated only when
Hot Key is selected on the Power On Function Menu.

• •

• •

• Onboard FDC Controller

You can use this function to enable or disable the onboard FDC controller.

• •

• •

• Onboard Serial Port 1 / Port 2

Select an address and the corresponding interrupt for each of the first and second serial
ports. The Choices: Disabled, 3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2F8/IRQ3, and
Auto. The second serial port shares the resources (address and IRQ) with IrDA.

• •

• •

• UART Mode Select

Choose the right type of infrared device:

- Normal : Normal operation

- IrDA : IrDA compliant serial infrared port

- ASKIR : Amplitude Shift Keyed Infrared Port

• •

• •

• RxD, TxD Active

Consult your IR peripheral documentation to select the combination of RxD and TxD.

• •

• •

• IR Transmission Delay

Consult your IR peripheral documentation to select Enabled or Disabled of the IR

Transmission Delay.

• •

• •

• Onboard Parallel Port

Select a logical LPT port name and matching address for the physical parallel (printer)
port.
The choices: 378/IRQ7, 278/IRQ5, 3BC/IRQ7 and Disabled.

All manuals and user guides at all-guides.com

40 BIOS SETUP

• •

• •

• Parallel Port Mode

This field allows you to set the operation mode of the parallel port.

- SPP : Allows normal-speed operation, but in one direction only.

- EPP : Allows bidirectional parallel port operation at maximum speed.

- ECP : Allows DMA and bidirectional operation. It is faster than EPP mode.

- ECP + EPP : Allows normal speed operation in two-way mode.

• •

• •

• EPP Mode Select

Select EPP port type 1.7 or 1.9.

• •

• •

• ECP Mode Use DMA

Assign DMA channel 1 or 3 to the port for ECP mode operation.

• •

• •

• PWR-ON After PWR-Fail

Choose if you want the system to automatically Power On after the power has failed.

- Off : Disable this function

- On : Enable this function

- Former-Sts : Not only to Power On the system, but also to return it to its former status.

• •

• •

• Game Port Address

Set Joystick Game Port Address. The choices : Disabled, 201 and 209.

• •

• •

• Midi Port Address

Set Midi Port Address. The choices : Disabled, 330 and 300.

• •

• •

• Midi Port IRQ

Assign IRQ 5 or 7 to the Midi Port.

All manuals and user guides at all-guides.com

BIOS SETUP 41

3.7 Power Management Setup

The Power Management Setup allows you to configure your system to minimize energy
consumption, according to your own style of computer use.

•

ACPI Function

This item allows you to enable/disable the Advanced Configuration and Power Interface
(ACPI).

• •

• •

• ACPI Suspend Type

Select the ACPI Suspend Type : S1 (POS) or S3 (STR).
If your expansion cards do not support the STR function, you must leave this field on S1
(POS) setting. The STR (Suspend-to-RAM) is an energy-saving feature. It takes only a few

seconds to wake up the system and return to the previous situation.

NOTE: This feature (STR) requires an ATX power supply with at least 720mA + 5V

standby power for the Advanced Configuration and Power Interface (ACPI) functions.

Otherwise, the system will fail to return from suspend mode.

•

Power Management

This category allows you to select the type (or degree) of power saving and is directly related

to the following modes.

All manuals and user guides at all-guides.com

1. Suspend Mode

2. HDD Power Down

There are three selections for Power Management. Two of them have fixed mode settings.

1. Min. Power Saving :
Minimum power management mode. Inactivity period is defined below:

Suspend Mode = 1 hr.
HDD Power Down = 15 min.

2. Max. Power Saving :
Maximum power management mode. Inactivity period is defined below:

Suspend Mode = 1 min.
HDD Power Down = 1 min.

3. User Define :
Allows you to set each mode individually. Select the time-out period for each mode
shown above.

•

Video Off Method

Defines the Video Off features.

-Blank Screen :
Only blanks the screen. Use this for monitors without power management and green
features.

-V/H SYNC+BLANK :
Blanks the screen and turns off vertical and horizontal scanning.

-DPMS :
The DPMS (Display Power Management System) feature allows the BIOS to control
the video display card if it supports the DPMS feature.

•

VIDEO Off In Suspend

This determines the manner in which the monitor is blanked. Select Yes to blank the

monitor when the system enters suspend mode.

•

Suspend Type

Select Suspend Type : Stop Grant or PWR ON Suspend.

42 BIOS SETUP

All manuals and user guides at all-guides.com

all-guides.com

BIOS SETUP 43

• Suspend Mode

After the selected period of system inactivity (1 minute to 1 hour), all devices except the
CPU will be shut down.

• HDD Power Down

After the selected period of system inactivity (1 to 15 minutes), the hard disk drive powers
down while all other devices remain active. This feature doesnt effect SCSI hard drives.

• Soft-Off by PWR-BTTN

When set to Instant-off, the ATX switch can be used as a normal system Power Off
button. When set to Delay 4 seconds, you need to press the ATX switch down for more
than 4 seconds if you want to Power Off the system.

• Wake-Up by PCI & WOL

Select Enabled if you want to Power On your system when a PCI or LAN event occurs.

• Power On by Ring

Select Enabled to Power On your system when the external MODEM receives a call.

NOTE:This function requires an external MODEM which supports the Ring Wake-
Up function.

• CPU Thermal-Throttling

Select the CPU Thermal-Throttling rate. If BIOS detects that the CPU temperature is too
high, it will slow down the CPUs speed according to this field. The choices: 87.5%,
75.0%, 62.5%, 50.0%, 37.5%, 25.0% and 12.5%.

• Resume by Alarm

Select Enabled if you want to power up your system at a certain time on the same day
every month or at a certain time every day.

• Date / Time

Set the Date and Time to Power On the system. Activated only when the Resume by
Alarm field is enabled.

• Reload Global Timer Events

When Enabled, an event occurring on any device listed below restarts the global timer
from Standby Mode, and Powers On the system.

•

MODEM Use IRQ

You can select one of the following interrupt resources for modem use: N/A, 3, 4, 5,
7, 9, 10, and 11.

All manuals and user guides at all-guides.com

3.8 PnP/PCI Configuration Setup

Primary IDE 0
Primary IDE 1
Secondary IDE 0
Secondary IDE 1
FDD, COM, LPT Port
PCI PIRQ[A-D]#

44 BIOS SETUP

The settings in these fields enable or disable the detection of
IDE, floppy, serial and parallel port activities for powering down
state transition. Actually it detects the read/write to/from I/O
ports.

• Reset Configuration Data

Normally, you leave this field Disabled. Select Enabled to reset Extended System
Configuration Data (ESCD), if you have just installed a new add-on card and the system
reconfiguration has caused such a serious conflict that the operating system cannot boot.
The setting will automatically be set back to Disabled when the system reboots.

• Resources Controlled by

The Award Plug and Play BIOS can automatically configure all the boot and Plug and
Play(PnP) compatible devices. If you select Auto, all of the Interrupt Requests (IRQs)
and DMA assignment fields will be deactived as the BIOS automatically assigns them.
The choices: Auto and Manual.

All manuals and user guides at all-guides.com

BIOS SETUP 45

• IRQ Resources

• IRQ-n Assigned to

When the resources are controlled manually, assign each System Interrupt to one of the
follows, depending on which type of device is using the interrupt.

- Legacy ISA Devices, requiring a specific interrupt (such as IRQ4 for serial port1),
compliant with the original PC AT bus specification.

- PCI/ISA PnP devices, whether designed for PCI or ISA bus architecture, compliant
with the Plug and Play standard.

• PCI / VGA Palette Snoop

Some VGA cards, such as graphics accelerators or MPEG video cards, might not show
colors properly. Select Enabled to correct this problem. If you dont have such problems,
leave this field at Disabled.

All manuals and user guides at all-guides.com

46 BIOS SETUP

3.9 PC Health Status

This menu provides two thermo-protect functions (CPU warning temperature and shutdown
temperature) and a hardware monitor center. These features let you know the health
status of your PC.

• CPU Warning Temperature

This field allows you to set the CPU warning temperature. You can choose from 50°C
/122°F to 70°C/158°F or even Disabled if you like.

• Current CPU / Power / Case Fan Speed

These fields display the fan speeds of the CPU, Power and Case.

• Vcore (V)

This field displays the CPU working voltage.

• VTT

This field displays the GTL bus voltage.

• 3.3VSB

This field displays the 3.3V standby power which supplies to CMOS battery.

• Shutdown Temperature

This field allows you to set the CPU shutdown temperature.
The choices: 60°C/140°F, 65°C/149°F, 70°C/158°F.

All manuals and user guides at all-guides.com

BIOS SETUP 47

3.10 Frequency / Voltage Control

• CPU Host / PCI Clock

This function allows you to set the FSB frequency of the CPU and the speed of
PCI bus. When JP3 is set to 66MHz, you can select the system bus frequency
from 66MHz to 75MHz. When JP3 is set to 100MHz, you can select the system
bus frequency from 100MHz to 133MHz. When JP3 is set to 133MHz, you can select
the system bus frequency from 133MHz to 150MHz.(TS-UWE31 only)

• CPU Clock Ratio

This function allows you to set the CPU internal frequency ratio. It determines the CPU
internal frequecny according to the following formula:

CPU internal frequency = frequency ratio x system bus frequency.*

* System bus frequency is set in the previous field (CPU Host / PCI Clock).
The choices: 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, and 8.

NOTE: Because Intel has locked the frequency ratio for new CPUs setting this field
to adjust the frequency ratio is useless. However, it is effective for old version CPUs.

All manuals and user guides at all-guides.com

all-guides.com

48 BIOS SETUP

3.11 Load Fail-Safe Defaults

This option allows you to load the troubleshooting default values permanently stored in the
BIOS ROM.

NOTE: These default settings are non-optimal and disable all high performance features.

3.12 Load Optimized Defaults

This option allows you to load the default values to the system configuration fields. These
default values are the optimized configuration settings for the system.

All manuals and user guides at all-guides.com

3.13 Supervisor Password

This option allows you to set a password to prevent others from changing the BIOS setting of
your system.

The password prevents any unauthorized use of your computer. If you set a password, the
system prompts for the correct password before you boot or access Setup.

To set a password:

1. At the prompt, type your password. Your password can be up to 8 alpha-numericcharacters.
When you type the characers, they appear as asterisks (*) on the password scteen box.

2. After typing the password, press [Enter] key.

3. At the next prompt, re-type your password and press [Enter] key again to confirm the new

password. After the password entry, the screen automatically reverts to the main screen.
To disable the password, press [Enter] key when prompted to enter the password. The screen
displays a message confirming that the password has been disabled.

Forget the password?

If you forget the password, you can clear it by erasing the CMOS Real Time Clock (RTC)
RAM with the jumper 5 (JP5: CMOS_CLR. Please refer to page 21). To erase the RTC RAM:

1. Unplug your computer.

2. Short the JP5.

3. Turn ON your computer.

4. Hold down [Delete] key during the POST process and enter BIOS setup to re-config

BIOS.

BIOS SETUP 49

All manuals and user guides at all-guides.com

50 BIOS SETUP

3.14 User Password

This option allows you to set a password to prevent others from changing the BIOS setting of
your system. This operation is the same as Supervisor Password.

3.15 Save & Exit Setup

Save the setting and exit the BIOS utility.

All manuals and user guides at all-guides.com

3.16 Exit Without Saving

Abort the current change and exit the BIOS utility.

BIOS SETUP 51

All manuals and user guides at all-guides.com

CHAPTER 4 SOFTWARE SETUP

Insert the CD-ROM enclosed with your motherboard into the CD-ROM drive. After the autorun
program executed, please check the model name showed on the screen. If the model name
doesnt fit your motherboard, please re-select the correct one.

4.1 INF Update for 810 Chipset

This section introduces INF files in Windows 95/98 for the following items:System and Graphics,
LPS Interface, SM Bus, PCI Bridge, Bus master IDE, USB Host, Controllers. Click INF Update
Utility for Intel 810 chipset, and follow the figures as below.

Click here

2

52 SOFTWARE SETUP

Click here

1

Click here

3

Click here

4

All manuals and user guides at all-guides.com

all-guides.com

SOFTWARE SETUP 53

Click here

5

4.2 VGA Driver Setup

This section introduces Intel 810 system and graphics controller Driver. Click VGA Driver
Setup, and the follow the figures as below:

Click here

1

Click here

6

Click here

2

All manuals and user guides at all-guides.com

Click here

3

Click here

4

4.3 Intel Security Controller Driver

This section helps you to install a security controller for Windows 95/98. Click Security Driver
Setup, and then followthe figures as below:

54 SOFTWARE SETUP

Click here

1

Click here

2

All manuals and user guides at all-guides.com

SOFTWARE SETUP 55

Click here

3

Click here

4

Click here

5

4.4 Audio Driver Setup

This section helps you to setup the onboard audio device. Click Audio Driver Setup, and
choose the opration system you use.

A. Audio Driver for Windows 95/98/2000

The figures follow are captured from Windows 98SE, and you can setup the Audio Codec in
almost the same way in Windows 95 and Windows 2000.

All manuals and user guides at all-guides.com

56 SOFTWARE SETUP

Click here3

Click here2

Click here1

Click here4

Click here5

Click here6

All manuals and user guides at all-guides.com

SOFTWARE SETUP 57

Click here7

Click here



Click here8

Click here9

Click here

10

Click here



All manuals and user guides at all-guides.com

all-guides.com

58 SOFTWARE SETUP

B. Audio Driver for WindowsNT

Click here

1

Click here

2

Click here

3

Click here

4

All manuals and user guides at all-guides.com

SOFTWARE SETUP 59

Click here

5

Click here

6

Click here

%

Click here

8

All manuals and user guides at all-guides.com

60 BIOS UPGRADE

CHAPTER 5 BIOS UPGRADE

Caution!

Only users familiar with the upgrade procedure are recommended to update the BIOS
of the motherboard and only when there is a need to do so. Please note that you have
to download and install the right file on your motherboard. Otherwise, you might cause
some serious system malfunctions.

5.1 How to Check Your BIOS File Name and Version

Please turn on PC first, the screen will display as follows :

TRANSCEND MODULAR BIOS : UWH3E-V1.01.12/16/99

BIOS Version 1.01

BIOS File Name

UWH3A - V1.01.12/16/99

( You can upgrade to newer version if your BIOS version is older
than this version.)

(Make sure the first 5 or 6 charactors are exactly the same as your
own version, otherwise you shouldn't try to upgrade your BIOS.)

5.2 How to Download the Correct BIOS File from the Web

Please enter the Transcend website on: http://www.transcendusa.com/
On the front page, click on theMotherboard icon, which is the second one down: on the
Motherboard page, click on the BIOS icon near the top. The BIOS page contains important
information: please take time to read it carefully. Then go to the bottom of the BIOS page,
click on Socket 370 and choose your motherboard model.
Your BIOS file name must absolutely match the one shown on our web site. Then download
the suitable version to your disk.

You can see the BIOS description on the third line.

All manuals and user guides at all-guides.com

BIOS UPGRADE 61

5.3 How to Upgrade Your Motherboard BIOS

Please follow these 5 steps listed below to upgrade your BIOS.
Step 1: Make a record of your original or existing BIOS Setup parameters.

- Press [Del] during the Power On Self Test to enter BIOS Setup Program when you
start your system.

- Write down the value of each parameter in order to re-configure your system after
BIOS updating.

Step 2: Make a System Disk

- Put a clean 3.5" disk in Drive A
MS-DOS : Key in

Format A:/S and press [Enter].

Windows O/S : Select the My Computer icon.

Click [3.5" Floppy (A:)]
Select [File/Format] from Command Bar
Under Format 3.5 Floppy (A:) Menu select
Format type = Full item, and
Other Options = Copy system files
Click [Start] button

Step 3: Download the updated Bios.exe file from the web site to a floppy disk.

(Ref 4.1 and 4.2)

Step 4: Execute the download file to decompress it.
Step 5: Please read the file of Readme.txt carefully, and follow the instructions step by
step.

Then you can finish the BIOS upgrade.

Your system could be damaged if the wrong BIOS version is
accidentl

y

used. If you are not sure what version you should

choose, please contact us at: techsupport

@

transcend.com.tw

Warning:

All manuals and user guides at all-guides.com