Transcend TS0/128/256MFLRD7, TS0128MFLRD7, TS0256MFLRD7 User Manual

Multi-Card Reader

User’s Manual

P/N TS0/128/256MFLRD7

Table of Contents

Introduction

Package Contents................................................................................................................1

Features ................................................................................................................................ 1

System Requirements ......................................................................................................... 2

Driver Installation

Driver Installation for Windows 98/98SE and 2000........................................................... 2

Driver Installation for Mac OS 9.x....................................................................................... 3

To Use the Multi-Card Reader

To Use with Windows 98/98SE and 2000........................................................................... 3

To Use with Windows Me and XP....................................................................................... 4

To Use with Mac OS 9.x....................................................................................................... 6

To Use with Mac OS X 10.1.2 or Later................................................................................ 6

To Use with Linux Kernel 2.4 or Later................................................................................ 6

To Safely Remove the Multi-Card Reader

To Remove in Windows 98/98SE........................................................................................ 7

To Remove in Windows 2000, Me, and XP ........................................................................ 7

To Remove in Mac OS and Linux ....................................................................................... 8

LED Indicators.......................................................................................................... 9

Specifications

.......................................................................................................... 10

Ordering Information

......................................................................................... 10

USB Card Reader Limited Warranty

1

Introduction

Thank you for purchasing Transcend’s Multi-Card Reader, a small device designed for fast,

easy data storage and exchange using multiple types of storage media: CompactFlash

Type I/II, Microdrive™, SmartMedia, Secure Digital, miniSD (with adapter), MultiMe-

diaCard™, RS-MMC (with adapter), Memory Stick

®

, Memory Stick PRO®, Memory Stick Duo®

(with adaptor) and Memory Stick PRO Duo

®

(with adaptor), and a built-in Flash Disk (0MB,

128MB or 256MB). Transcend’s Multi-Card Reader is an easily installed device that needs

only a USB interface to allow its use by any PC, Mac, or notebook computer. In addition, its

mobility, strong data retention ability, and impressive appearance will provide you with a

brand-new experience.

Package Contents

The Multi-Card Reader package includes the following items:

• Multi-Card Reader

• Leather Case

• Driver CD

• USB Extension Cable

• Quick Installation Guide

Features

The Multi-Card Reader has the following features:

• Compliant with USB specification version 2.0;

• Easy Plug and Play installation;

• USB bus powered (no external power needed);

• Supports multiple types of storage media:

CompactFlash Card Type I/II

Microdrive

SmartMedia Card

Secure Digital Card

miniSD (with adapter)

MultiMediaCard

RS-MMC (with adapter)

Memory Stick

Memory Stick PRO

Memory Stick Duo (with adapter)

Memory Stick PRO Duo (with adapter)

Flash Disk (built-in 0MB, 128MB or 256MB)

• High-speed transfer rate of up to 480Mbit/sec; and

• LEDs to indicate card insertion and data traffic.

2

System Requirements

• Desktop or notebook computer with a USB port

• One of the following operating systems:

- Windows® 98/98SE, Windows® 2000

- Windows® Me, Windows® XP (no driver needed)

- Mac™ OS 9.x

- Mac™ OS X 10.1.2 or later (no driver needed)

- Linux kernel 2.4 or later (no driver needed)

Driver Installation

Driver Installation for Windows 98/98SE and 2000

1. Power on the computer to which you will connect the Multi-Card Reader and make sure

the USB port is enabled and working properly. (Do not plug your Multi-Card Reader into

the USB port at this time).

2. Insert the Driver CD into the CD-ROM drive (Auto-Run supported). Click the Driver but-

ton.

3. The InstallShield Wizard guides you through the installation process.

4. Restart your computer to complete driver installation.

 You can uninstall the Multi-Card Reader and driver by running Add/Remove Pro-

grams in Settings > Control Panel. Follow the on-screen instructions to complete

the process.