Trano M 8xx Completed User Manual

Completed User Manual

Multi-Lingual
Translator

1

Power Source

• The translator is powered by 2 AAA Alkaline
(non-rechargeable) batteries (included).

• The translator can also operate via USB,
connected to PC/laptop. Note batteries will not
be charged via USB.

• It can be operated via mini USB adapter (not
included), compatible with the cell phone
devices in market, e.g. Blackberry, Nokia,
Samsung etc.

• When batteries power is low, appear on
display. If this happens, replace batteries.

• Turn off the translator before replacing batteries.

• Do not use different types of batteries or used
batteries.

• Make sure batteries make good contact with the
metal plates.

• Always remove a weak or dead battery from the
device.

• To avoid damage caused by leakage of battery
uid, replace batteries once every 6 months.

• Do not expose batteries to direct heat.

Micro-SD Reader

Micro-SD cartridge is provided on the side of
translator. Micro-SD card (not included) could be
used to download les to the translator. Micro-SD
reader accepts card up to 8GB.

2

“.txt les” le

1. Insert your Micro SD card.

2. Press to switch the unit on and press .
Use down keys to select Text Reader, followed
by .

3. Use ( / ) keys to select SD Card and
press .

4. Use arrow keys to select the text le and press
to read.

3

USB

The translator can be connected to a computer
via USB cable to download les as necessary. Note
USB download works with Windows system only.

USB driver will automatically install rst time you
plug in the USB cable. You can copy text les and
MP3 les to Removable Disk.
Disconnecting USB cable un-mounts Removable
Disk and resets the translator.

1. Connect translator to a computer via USB cable.

2. The following message will pop up. Press
key to highlight YES and press to

conrm.

4

Reading “.txt les” in your Translator

1. Press TOOLS and select Text Reader.

2. Highlight Disk E and press ENTER to see your
folder list.

3. Use arrow keys to select your desired le and
press ENTER to read.

5

Resetting the Translator

If the keyboard fails to respond, or if the screen
performs erratically, you should reset the
translator.
Remove the batteries. Put the batteries back after
~1 minute.

The function of keys

6

1. : On/Off button. Translator has auto
turn off function (3, 5, or 10 minutes).
You can set the time under Tool 
Shut Off Time. Factory default is set to
3 minutes.

2. : Main Language Menu.

3. : Menu language. Select your language
and press Enter.

4. : System Setup, Calculator, Time
Conversion, Currency Conversion, Unit
Conversion, MP3 Player, My Recorder,
Games, Science Formula, Text Reader,
User Manual, Copyright, Version.

5. : Zoom in/out

6. : Space.

7. : F1 function key.

8. : F2 function key.

9. : F3 function key.

10. : F4 function key.

11.

: F5 function key.

12.

: a) Capital letter. If Shift key is pressed

twice, CAPS sign will appear on top
right corner of screen.

7

b) In cross word translation, press shift
key, then press right arrow key
to highlight two or more words.

Tips: While typing letters with the shift key on a
PC, the shift key + the letter key are pressed
simultaneously, in the translator you have to
press shift key once followed by the letter key.

For instance in TAMIL model:
On the PC keyboard:

Press & hold key and press letter (D) to get

“அ”

On the TRANSLATOR keyboard:
Press key once (do not hold it down) then

press letter (D) to get “அ ”.

13. : âá - Accent key: Press target alphabet,
and then press the Accent key to get

available characters. E.g. Press ‘o’,
then press the Accent key to get [ô, œ]
etc.
★ - Favorites: In Translate or
Dictionary mode, press this key to copy
screen to your favorite list.

Tips: While typing letters with the key on
translator keyboard, you have to press the letter

key once followed by the

key.

For instance in French model, on the translator

keyboard press letter (A) once (do not hold it
down) then press key to get “á”.

8

14. In Translation mode – input Symbol:
Special characters and wildcard/
placeholder.
(?) Placeholder for unknown letter, e.g.
‘AMA?ING’ .
(*) Wildcard, e.g ‘AMAZ*’, provides
options such as AMAZE, AMAZED, etc.
In Calculator mode – no function.

15. : Escape, returns to previous screen.

16. : Backspace, delete the last input.

17. : Speaker, press to hear pronunciation.

18. / : Speaker up/down and move
to available voice option.

19. / : Navigator up/down and
Page up/Page down.

20. / : Left/ Right.

21. : Enter key.

22. : (e.g. M86 model)

a. Russian letter.

b. Bulgarian letter.

9

Alphabet with Accent (Vowel)
(Available in some European model)

Some languages have their own alphabet with ac­cent. Simply press the original key and key, to

get the available characters.

E.g. English-French

In the home language of French.

Type in “e”, display shows: “e”

Press once, display shows: “è”

Press twice, display shows: “é”

Press three times, display shows: “ê”

Press four times, display shows: “ë”

10

Alphabet with Accent (Vowel)

a
á
à
â
ä

ă
ā

ã
å

ą

æ

c

ć
č

ç

d

ď
đ

Press A, press repeatedly to
get your desired character.

Press C, press repeatedly to
get your desired character.

Press D, press repeatedly to
get your desired character.