A whole lot of fresh.
Trane FreshEffects™ Energy Recovery Ventilator provides a whole-house solution for fresh air ventilation.
Trane FreshEffects exhausts stale indoor air and brings in fresh, preconditioned, outdoor air, so your
home can be a cleaner, more enjoyable place to live. Not only that, Trane FreshEffects also dilutes the
level of odors, chemical vapors and naturally occurring gases that become trapped in tightly sealed
homes. Plus, with its quiet operation and industry leading warranty, you can count on fresh air from
Trane FreshEffects for years to come.
• Constantly delivers fresh air while removing stale indoor air regardless of
HVAC system operation
• IAQ filter included
• Ideal for homes with children
• Three sizes to fit all homes up to 4,500 sq. ft.
Flexible Mounting for easy
installation in the attic,
garage or basement, in
virtually any position with
minimal retrotting required.
High Efficiency Crossflow
Energy Transfer Core recovers
heat and moisture from
theoutgoing air during cold
weather. During hot, humid
weather, it pre-cools and
dehumidies incoming air.
Slide-Out Filter
allows easy access for quick
cleaning using an ordinary
household vacuum cleaner.
TRANE FRESHEFFECTS
Outdoor Air
Heat and
Moisture
Transfer
Stale Indoor Air
Powder-Painted Cabinet for a smooth,
durable, high-gloss appliance-like finish.
™
Stale Air
Sent Outdoors
Fresh Air
Sent Indoors
High-Performance Motor is
engineered with permanently
lubricated bearings for low
maintenance and longer motor life.
Adjustable Control provides automatic timed
ventilation, plus manual control for more ventilation
if needed. Press the fan icon on the FreshEffects
control to adjust runtime percentage per hour.
May also be controlled with Trane Nexia™-enabled
connected controls.
A value ventilation option
with Intelligent Logic
The EnviroWise™ QF130V inline ventilator offers a cost effective mechanical fresh air solution that
controls humidity and temperature. The QF130V has a full ECM motor that makes installation fast
and easy, with no balancing dampers required. The ECM motor allows for adjustable airflow to
meet the ventilation requirements for homes up to 3500 sq. ft. The installer dials in the quantity
(CFM) of fresh air needed and sets the desired limits for outside humidity and temperature, and
the QF130V is ready. A 24V relay is included with the unit and allows the flexibility of controlling
the QF130V from a wall mounted thermostat..
QF130V VENTILATOR
62.2 Compliant Ventilation 62.2
Compliant Ventilation with
adjustable airow from 30 to
130 cfm to meet ventilation
codes for all size homes.
Full ECM Motor with Intelligent
Logic Controller. Quiet low
sone motor means no noise
objections.
Supply in-line ventilation positively
pressurizes home and helps to mitigate
uncontrolled infiltration. Can be
interlocked with system fan for even
whole home air distribution
MERV 8 filter included for
improved indoor air quality.
Optional heater available for
extremem cold climates.
On-board LCD “logic” controller
allows for customized setup depending on climate
conditions. High / low temp and
high humidity lock out options
with timed sampling to ensure
minimum ventilation without
excessive energy use.
Optional 24V functionality with our
Nexia™ enabled thermostats allows
ventilation control from your smart
phone or computer.