Trane 4DCY4024, 4DCY4030, 4DCY4060, 4DCY4036, 4DCY4042 Product Data

...
Product Data
4DCY4024 through 4DCY4060
Packaged Convertible Dual Fuel 14 SEER 2 - 5 Ton, 60 - 120 MBTU
R-410A
© 2014Trane
Pub. No. 22-1799-20-EN
It's Hard to Stop a Trane.
Packaged Convertible Dual Fuel System
Trane offers a complete family of dual fuel heating and cooling systems, de­signed to keep you comfortable all year long, regardless of the weather, while keeping your operating costs as low as possible. The heat pump operates ef­ficiently as both an air conditioner and a heater. In the summer, the heat pump cools your home just like any other air conditioner by pulling the heat from the inside and releasing it outdoors. In the winter, it captures the heat that is al­ways present in the outdoor air and transfers it indoors. The gas furnace pro­vides additional heating capacity for cooler weather.
Introducing the new TRANE Packaged Convertible Dual Fuel System.
Single Packaged Convertible Dual Fuel Systems are easy and versatile to install. Because cooling and heating
functions are all contained in a single cabinet, a Trane packaged dual fuel system is easy to install and service. It can be flush mounted beside your home at ground level or placed on the roof for horizontal or downflow installation. When connected to a *CONT402, 802, or 803 comfort control, and air distribution ducts, you have a highly efficient, total home comfort system.
Single Packaged Dual Fuel Systems are unmatched in quality and reli­ability. All major components on these
products, including the compressor, have been designed and manufactured for maximum service. Every Climatuff® compressor is designed and manufac­tured to exacting specifications. Each design is life tested in extreme envi­ronments to ensure reliable and long lasting operation in normal applications. Each compressor has internal motor protection for added reliability.
2
Contents
Optional Equipment Listing 4
General Data 5
Indoor Blower Performance 8
Typical Wiring 16
Optional Equipment 14
Dimensional Data 19
Mechanical Specifications 25
3
Optional Equipment Listing
OPTIONAL EQUIPMENT FOR 4DCY4 PACKAGED UNITS (check mark [] indicates accessories included)
Hinged Filter Access Door (4DCY4024-036) 8 ................................................................ BAYACCDOR1A[ ]
Hinged Filter Access Door (4DCY4042-060) 8 ................................................................ BAYACCDOR2A[ ]
Roof Curb Full Perimeter (4DCY4024-036) 3 ...................................................................BAYCURB050A[ ]
Roof Curb Full Perimeter (4DCY4042-060) 3 ...................................................................BAYCURB051A[ ]
Roof Curb Utility Extension Kit (BAYCURB050A)....................................................................BAYUTIL101B[ ]
Roof Curb Utility Extension Kit (BAYCURB051A)....................................................................BAYUTIL102B[ ]
0-25% Manual Fresh Air Damper (4DCY4024-36) 1. .......................................................... BAYOSAH001A[ ]
0-25% Manual Fresh Air Damper (4DCY4042-060) 1. ........................................................ BAYOSAH002A[ ]
Motorized Fresh Air Damper (4DCY4024-36) 1. ............................................................... BAYDMPR101A[ ]
Motorized Fresh Air Damper (4DCY4042-060) 1. .............................................................. BAYDMPR102A[ ]
16" Round Duct Adapter (2 per box) (4DCY4024-36) 6 .................................................... BAYSQRD001A[ ]
18" Round Duct Adapter (2 per box) (4DCY4024-060) 6 .................................................. BAYSQRD002A[ ]
0-100% Mod Economizer w/Baro. Relief (4DCY4024-36) 124 ....................................... BAYECON101B[ ]
0-100% Mod. Economizer w/Baro. Relief (4DCY4042-060) 124. .................................... BAYECON102B[ ]
0-100% Horizontal Economizer (4DCY4024-36) 12 . ....................................................... BAYECON200A[ ]
0-100% Horizontal Economizer (4DCY4042-060) 12 . ..................................................... BAYECON201A[ ]
Economizer Relay Kit (required for Heat Pump applications) ................................................BAYRLAY004A[ ]
Enthalpy Control for Economizer (solid state). ...................................................................... BAYENTH001A[ ]
Remote Potentiometer (All-BAYECON***A) ............................................................................. BAYSTAT023[ ]
1"-2" Filter Frame (4DCY4024-36) (20 x 25 filter not included) 1. ........................................ BAYFLTR101B[ ]
1"-2" Filter Frame (4DCY4042-60) (20 x 20 & 20 x18 filter not included) 1. ......................... BAYFLTR201B[ ]
Head Pressure Control (Low Ambient Cool) (208/240v) Kit 5. ...........................................BAYLOAM105A[ ]
Quick Start Kit (4DCY4-‡1) .................................................................................................. BAYQSKT300A[ ]
Crankcase Heater Recip (4DCY4024, 30)(230v) 5. ............................................................BAYCCHT101A[ ]
Crankcase Heater Scroll(4DCY4042, 48, 60)(230v) 5. .......................................................BAYCCHT102A[ ]
Crankcase Heater Scroll(4DCY4036)(230v) 5. ...................................................................BAYCCHT103A[ ]
Adapter Curb 4DCY4024-36 to BAYCURB030,38 .............................................................. BAYADAP050A[ ]
Adapter Curb 4DCY4024-36 to BAYCURB033 ................................................................... BAYADAP051A[ ]
Adapter Curb 4DCY4042-60 to BAYCURB030,38 .............................................................. BAYADAP052A[ ]
Adapter Curb 4DCY4042-60 to BAYCURB033 ................................................................... BAYADAP053A[ ]
Adapter Curb 4DCY4042-60 to BAYCURB034 ................................................................... BAYADAP054A[ ]
12" Duct Shroud Covers Horizontal *DCY4024-607. ..........................................................BAYCOVR112A[ ]
18" Duct Shroud Covers Horizontal *DCY4024-60 7. .........................................................BAYCOVR118A[ ]
Extreme Condition Mounting Kit - All BAYCURB & BAYADAP .............................................BAYEXMK001A[ ]
Extreme Condition Mounting Kit - All BAYUTIL ....................................................................BAYEXMK002B[ ]
Extreme Condition Mounting Kit - All Slab Mounts ...............................................................BAYEXMK003A[ ]
Lifting Lug Kit ...........................................................................................................................BAYLlFT002B[ ]
LP Conversion Kit (All 40K, 120K Models) ...........................................................................BAYLPKT100A[ ]
LP Conversion Kit (All 64K, 96K Models) .............................................................................BAYLPKT101A[ ]
LP Conversion Kit (All 75K Models).......................................................................................BAYLPKT102A[ ]
NOTES: 1 Must use internal filter frame when economizer or fresh air kit is used. 2 Dry bulb control standard with economizer. 3 Ships knocked down. 4 Downflow only. 5 Low Ambient cooling requires crankcase heater (BAYCCHT----A).
6 It is the responsibility of the installing dealer to properly size the ductwork for each specific application. 7 BAYCOVR112,118A will not cover BAYSQRD002A applications.
8 BAYACCDOR1A requires BAYFLTR101B & BAYACCDOR2A requires BAYFLTR201B. They are not backward com-
‡ = A or B
patible to BAYFLTR101/201A.
4
General Data
MODEL RATED Volts/PH/Hz Performance Cooling BTUH
Indoor Airflow (CFM) Power Input (KW) EER/SEER(BTU/Watt-Hr.) Sound Power Rating [dB(A)]7
HP Heating Performance
(High Temp.)BTUH / COP Power Input (KW) (Low Temp.) BTUH / COP Power Input (KW) HSPF (BTU / Watt-Hr.)
Gas Heating Performance
(High) Input BTUH Capacity BTUH Temp. Rise — Min/Max (°F) (Low) Input BTUH Capacity BTUH AFUE Type of Gas Gas Pipe Size (in.)
POWER CONN.—V/PH/HZ
Min. Brch. Cir. Ampacity Fuse Size — Max. (amps) Fuse Size — Recmd. (amps)
COMPRESSOR
Volts/Ph/Hz R.L. Amps — L.R. Amps
OUTDOOR COIL — TYPE
Rows/F.P.I. Face Area (sq.ft.) Tube Size (in.) Refrigerant Control
INDOOR COIL — TYPE
Rows/F.P.I. Face Area (sq.ft.) Tube Size (in.) Refrigerant Control Drain Conn. Size (in.)
OUTDOOR FAN — TYPE
Dia. (in.) Drive/No. Speeds CFM @ 0.0 in. w.g. 7 Motor — HP/R.P.M. Volts/Ph/Hz F.L. Amps/L.R. Amps
INDOOR FAN — TYPE
Dia x Width (in.) Drive/No. Speeds CFM @ 0.0 in. w.g. Motor — HP/R.P.M. Volts/Ph/Hz F.L. Amps/L.R. Amps
COMBUSTION FAN — TYPE
Drive/No. Speeds Motor — HP/R.P.M. (High/Low) Volts/Ph/Hz FLA
FILTER / FURNISHED
Type Recommended Recmd. Face Area (sq. ft.)
REFRIGERANT / Charge (lbs.) DIMENSIONS
Crated (in.)
WEIGHT / Shipping / Net (lbs.)
4DCY4024C1060A
208-230/1/60
23600
760
2.162
12/14.0
68
22400 / 3.7
1.77
11600 / 2.38
1.24
8.0
60000 48600
40 / 70
48000 38880
81
NATURAL/LP
1/2
208-230/1/60
16.1 25 25
RECIPROCATING
208-230/1/60
8.3 / 57.8
SPINE-FIN
2 / 24
13.32 3/8
EXPANSION VALVE
PLATE FIN
3 / 15
3.54 3/8
EXPANSION VALVE
3/4 FEMALE NPT
PROPELLER
23.4
DIRECT / 1
2590
1/12 / 810
208-230/1/60
0.54 / 0.95
CENTRIFUGAL
10 X 10
DIRECT / VARIABLE
SEE FAN PERFORMANCE TABLE
1/2 / VARIABLE
200-230/1/60
4.3 / 4.3
CENTRIFUGAL
DIRECT / 2
1/20 / 3350/2600
208-230/1/60
0.34 NO
THROWAWAY
4
R410A / 6.5
H X W X L
45.86 / 44.5 / 52.03 481 / 385
4DCY4030C1070A
208-230/1/60
30000
880
2.15
12.0 / 14.25 71
28000 / 3.9
2.15
15400 / 2.48
1.81
8.0
70000 56700
30 / 60
56000 45360
81
NATURAL/LP
1/2
208-230/1/60
19.1 30 30
RECIPROCATING
200-230/1/60
11.1 / 63
SPINE-FIN
2 / 24
13.32 3/8
EXPANSION VALVE
PLATE FIN
4 / 15
3.54 3/8
EXPANSION VALVE
3/4 FEMALE NPT
PROPELLER
23.4
DIRECT / 1
3250
1/6 / 830
208-230/1/60
1.0 / 1.7
CENTRIFUGAL
10 X 10
DIRECT / VARIABLE
SEE FAN PERFORMANCE TABLE
1/2 / VARIABLE
208-230/1/60
4.3 / 4.3
CENTRIFUGAL
DIRECT / 2
1/20 / 3350/2600
208-230/1/60
0.34 NO
THROWAWAY
4
R410A / 6.56
H X W X L
45.86 / 44.5 / 52.03 481 / 385
4DCY4036C1070A
208-230/1/60
37000
1150
3.11
12.0 / 14.0 69
33200 / 3.6
2.7
22400 / 2.4
2.5
8.0
70000 56700
30 / 60
56000 45360
81
NATURAL/LP
1/2
208-230/1/60
26.2 40 40
SCROLL
208-230/1/60
16.7 / 79
SPINE-FIN
2 / 24
15.49 3/8
EXPANSION VALVE
PLATE FIN
4 / 15
3.54 3/8
EXPANSION VALVE
3/4 FEMALE NPT
PROPELLER
23.4
DIRECT / 1
3310
1/5 / 830
208-230/1/60
1.1 / 1.9
CENTRIFUGAL
10 X 10
DIRECT / VARIABLE
SEE FAN PERFORMANCE TABLE
1/2 / VARIABLE
200-230/1/60
4.3 / 4.3
CENTRIFUGAL
DIRECT / 2
1/20 / 3350/2600
208-230/1/60
0.34 NO
THROWAWAY
4
R410A / 7.5
H X W X L
47.86 / 44.5 / 52.03 488 / 392
1 Certified in accordance with the Unitary Air-Conditioner Equipment certification program, which is based on AHRI
Standard 210/240.
2 All models are U L Listed. Ratings shown are for elevations up to 2000 ft. For higher elevations reduce ratings at a
rate of 4% per 1000 ft. elevation.
3 Convertible to LPG. 4 This value is approximate. For more precise value, see Unit Nameplate. 5 Based on U.S. Government Standard Tests. 6 Filters must be installed in return air stream. Square footages listed are based on 300 f.p.m. face velocity. If permanent
filters are used size per manufacturer's recommendation with a clean resistance of 0.05" W.C.
7 Sound Power values are not adjusted for AHRI 270-95 tonal corrections.
8 Standard Air — Dry Coil — Outdoor.
5
General Data
MODEL RATED Volts/PH/Hz Performance Cooling BTUH
Indoor Airflow (CFM) Power Input (KW) EER/SEER(BTU/Watt-Hr.) Sound Power Rating [dB(A)]7
HP Heating Performance
(High Temp.)BTUH / COP Power Input (KW) (Low Temp.) BTUH / COP Power Input (KW) HSPF (BTU / Watt-Hr.)
Gas Heating Performance
(High) Input BTUH Capacity BTUH Temp. Rise — Min/Max (°F) (Low) Input BTUH Capacity BTUH AFUE Type of Gas Gas Pipe Size (in.)
POWER CONN.—V/PH/HZ
Min. Brch. Cir. Ampacity Fuse Size — Max. (amps) Fuse Size — Recmd. (amps)
COMPRESSOR
Volts/Ph/Hz R.L. Amps — L.R. Amps
OUTDOOR COIL — TYPE
Rows/F.P.I. Face Area (sq.ft.) Tube Size (in.) Refrigerant Control
INDOOR COIL — TYPE
Rows/F.P.I. Face Area (sq.ft.) Tube Size (in.) Refrigerant Control Drain Conn. Size (in.)
OUTDOOR FAN — TYPE
Dia. (in.) Drive/No. Speeds CFM @ 0.0 in. w.g. 7 Motor — HP/R.P.M. Volts/Ph/Hz F.L. Amps/L.R. Amps
INDOOR FAN — TYPE
Dia x Width (in.) Drive/No. Speeds CFM @ 0.0 in. w.g. Motor — HP/R.P.M. Volts/Ph/Hz F.L. Amps/L.R. Amps
COMBUSTION FAN — TYPE
Drive/No. Speeds Motor — HP/R.P.M. (High/Low) Volts/Ph/Hz FLA
FILTER / FURNISHED
Type Recommended Recmd. Face Area (sq. ft.)
REFRIGERANT / Charge (lbs.) DIMENSIONS
Crated (in.)
WEIGHT / Shipping / Net (lbs.)
4DCY4036B3075A
208-230/3/60
36000
1185
3.28
11.4 / 14.0 69
32400 / 3.5
2.7
20600 / 2.36
2.6
8.0
75000 60500 30 / 60 56250 48400
80.0
NATURAL
1/2
208-230/3/60
18.5 25 25
SCROLL
208-230/3/60
10.4 / 73
SPINE-FIN
2 / 24
15.49 3/8
EXPANSION VALVE
PLATE FIN
4 / 15
3.54 3/8
EXPANSION VALVE
3/4 FEMALE NPT
PROPELLER
23.4
DIRECT / 1
3270
1/5 / 830
208-230/1/60
1.1 / 1.9
CENTRIFUGAL
10 X 10
DIRECT / VARIABLE
SEE FAN PERFORMANCE TABLE
1/2 / VARIABLE
200-230/1/60
4.3 / 4.3
CENTRIFUGAL
DIRECT / 2
1/45 / 2800/1500
208-230/1/60
0.34 NO
THROWAWAY
4
R410A / 7.4
H X W X L
47.86 / 44.5 / 52.03 488 / 392
4DCY4042C1090A
208-230/1/60
42000
1380
3.50
12.0 / 14.0 74
38000 / 3.45
3.23
23400 / 2.32
2.96
8.0
90000 72900
30 / 60
72000 58320
81
NATURAL/LP
1/2
208-230/1/60
30.8 45 45
SCROLL
208-230/1/60
17.9 / 112
SPINE-FIN
2 / 24
18.01 3/8
EXPANSION VALVE
PLATE FIN
3 / 15
5
3/8
EXPANSION VALVE
3/4 FEMALE NPT
PROPELLER
28.2
DIRECT / 1
4440
1/4 / 825
208-230/1/60
1.5 / 3.4
CENTRIFUGAL
11 X 10
DIRECT / VARIABLE
SEE FAN PERFORMANCE TABLE
3/4 / VARIABLE
208-230/1/60
6.8 / 6.8
CENTRIFUGAL
DIRECT / 2
1/20 / 3350/2600
208-230/1/60
0.34 NO
THROWAWAY
5.3
R410A / 8.2
H X W X L
47.86 / 47.4 / 61.75 653 / 525
4DCY4048C1090B
208-230/1/60
47500
1470
3.96
12.0 / 14.0 73
45000 / 3.5
3.77
26800 / 2.3
3.44
8.0
90000 72900 30 / 60 72000 58320
81
NATURAL/LP
1/2
208-230/1/60
33.9 50 50
SCROLL
208-230/1/60
20.5 / 109
SPINE-FIN
2 / 24
18.01 3/8
EXPANSION VALVE
PLATE FIN
3 / 15
5.0 3/8
EXPANSION VALVE
3/4 FEMALE NPT
PROPELLER
28.2
DIRECT / 1
4450
1/4 / 825
208-230/1/60
1.4 / 3.5
CENTRIFUGAL
11 X 10
DIRECT / VARIABLE
SEE FAN PERFORMANCE TABLE
3/4 / VARIABLE
200-230/1/60
6.8 / 6.8
CENTRIFUGAL
DIRECT / 2
1/20 / 3350/2600
208-230/1/60
0.34 NO
THROWAWAY
5.3
R410A / 7.75
H X W X L
47.86 / 47.4 / 61.75 653 / 525
1 Certified in accordance with the Unitary Air-Conditioner Equipment certification program, which is based on AHRI
Standard 210/240.
2 All models are U L Listed. Ratings shown are for elevations up to 2000 ft. For higher elevations reduce ratings at a
rate of 4% per 1000 ft. elevation.
3 Convertible to LPG. 4 This value is approximate. For more precise value, see Unit Nameplate. 5 Based on U.S. Government Standard Tests. 6 Filters must be installed in return air stream. Square footages listed are based on 300 f.p.m. face velocity. If permanent
filters are used size per manufacturer's recommendation with a clean resistance of 0.05" W.C.
7 Sound Power values are not adjusted for AHRI 270-95 tonal corrections.
8 Standard Air — Dry Coil — Outdoor.
6
General Data
MODEL RATED Volts/PH/Hz Performance Cooling BTUH
Indoor Airflow (CFM) Power Input (KW) EER/SEER(BTU/Watt-Hr.) Sound Power Rating [dB(A)]7
HP Heating Performance
(High Temp.)BTUH / COP Power Input (KW) (Low Temp.) BTUH / COP Power Input (KW) HSPF (BTU / Watt-Hr.)
Gas Heating Performance
(High) Input BTUH Capacity BTUH Temp. Rise — Min/Max (°F) (Low) Input BTUH Capacity BTUH AFUE Type of Gas Gas Pipe Size (in.)
POWER CONN.—V/PH/HZ
Min. Brch. Cir. Ampacity Fuse Size — Max. (amps) Fuse Size — Recmd. (amps)
COMPRESSOR
Volts/Ph/Hz R.L. Amps — L.R. Amps
OUTDOOR COIL — TYPE
Rows/F.P.I. Face Area (sq.ft.) Tube Size (in.) Refrigerant Control
INDOOR COIL — TYPE
Rows/F.P.I. Face Area (sq.ft.) Tube Size (in.) Refrigerant Control Drain Conn. Size (in.)
OUTDOOR FAN — TYPE
Dia. (in.) Drive/No. Speeds CFM @ 0.0 in. w.g. 7 Motor — HP/R.P.M. Volts/Ph/Hz F.L. Amps/L.R. Amps
INDOOR FAN — TYPE
Dia x Width (in.) Drive/No. Speeds CFM @ 0.0 in. w.g. Motor — HP/R.P.M. Volts/Ph/Hz F.L. Amps/L.R. Amps
COMBUSTION FAN — TYPE
Drive/No. Speeds Motor — HP/R.P.M. (High/Low) Volts/Ph/Hz FLA
FILTER / FURNISHED
Type Recommended Recmd. Face Area (sq. ft.)
REFRIGERANT / Charge (lbs.) DIMENSIONS
Crated (in.)
WEIGHT / Shipping / Net (lbs.)
4DCY4048A3096C
208-230/3/60
47000
1470
4.03
10.85 / 14.0 73
42500 / 3.5
3.56
26800 / 2.3
3.44
8.0
96000 77500
30 / 60
72000 62000
80
NATURAL
1/2
208-230/3/60
25.3 35 35
SCROLL
208-230/3/60
13.7 / 83.1 SPINE-FIN
2 / 24
18.01 3/8
EXPANSION VALVE
PLATE FIN
3 / 15
5.0 3/8
EXPANSION VALVE
3/4 FEMALE NPT
PROPELLER
28.2
DIRECT / 1
4450
1/4 / 825
208-230/1/60
1.4 / 3.5
CENTRIFUGAL
11 X 10
DIRECT / VARIABLE
SEE FAN PERFORMANCE TABLE
3/4 / VARIABLE
200-230/1/60
6.8 / 6.8
CENTRIFUGAL
DIRECT / 2
1/45 / 2800/1500
208-230/1/60
0.34 NO
THROWAWAY
5.3
R410A / 7.75
H X W X L
47.86 / 47.4 / 61.75 653 / 525
4DCY4060C1115A
208-230/1/60
58000
1785
4.83
12.0 / 14.0 76
55000 / 3.6
4.48
35400 / 2.4
4.30
8.0
115000
93150
30 / 60
92000 74520
81
NATURAL/LP
1/2
208-230/1/60
39.9 60 60
SCROLL
208-230/1/60
25 / 134
SPINE-FIN
2 / 24
23.07 3/8
EXPANSION VALVE
PLATE FIN
4 / 15
5.0 3/8
EXPANSION VALVE
3/4 FEMALE NPT
PROPELLER
28.2
DIRECT / 1
5710
1/3 / 830
208-230/1/60
1.7 / 3.5
CENTRIFUGAL
11 X 10
DIRECT / VARIABLE
SEE FAN PERFORMANCE TABLE
1 / VARIABLE 208-230/1/60
6.9 / 6.9
CENTRIFUGAL
DIRECT / 2
1/20 / 3350/2600
208-230/1/60
0.34 NO
THROWAWAY
6.7
R410A / 11.94
H X W X L
51.86 / 47.4 / 61.75 676 / 548
4DCY4060A3120C
208-230/3/60
57500
1745
5.48
11.5 / 14.0 76
54500 / 3.5
4.56
36400 / 2.48
4.29
8.0
120000
96000
30 / 60
90000 77500
80.0
NATURAL
1/2
208-230/3/60
28.6 45 45
SCROLL
208-230/3/60
16.0 / 110 SPINE-FIN
2 / 24
23.57 3/8
EXPANSION VALVE
PLATE FIN
4 / 15
5.0 3/8
EXPANSION VALVE
3/4 FEMALE NPT
PROPELLER
28.2
DIRECT / 1
1/3 / 830
208-230/1/60
1.7 / 3.5
CENTRIFUGAL
11 X 10
DIRECT / VARIABLE
SEE FAN PERFORMANCE TABLE
1 / VARIABLE 208-230/1/60
6.9 / 6.9
CENTRIFUGAL
DIRECT / 2
1/45 / 2800/1500
208-230/1/60
0.34 NO
THROWAWAY
6.7
R410A / 10.125
H X W X L
51.86 / 47.4 / 61.75 676 / 548
1 Certified in accordance with the Unitary Air-Conditioner Equipment certification program, which is based on AHRI
Standard 210/240.
2 All models are U L Listed. Ratings shown are for elevations up to 2000 ft. For higher elevations reduce ratings at a
rate of 4% per 1000 ft. elevation.
3 Convertible to LPG. 4 This value is approximate. For more precise value, see Unit Nameplate. 5 Based on U.S. Government Standard Tests. 6 Filters must be installed in return air stream. Square footages listed are based on 300 f.p.m. face velocity. If permanent
filters are used size per manufacturer's recommendation with a clean resistance of 0.05" W.C.
7 Sound Power values are not adjusted for AHRI 270-95 tonal corrections.
8 Standard Air — Dry Coil — Outdoor.
7
Indoor Blower Performance
Selection
Low Stage High Stage
7-OFF 8-OFF A 600 850
7-ON 8-OFF B 625 900
7-OFF 8-ON C 650 925
7-ON 8-ON D 700 975
4DCY4024
Switch Settings Nominal Airflow
Selection
Low Stage High Stage
7-OFF 8-OFF A 725 1000
7-ON 8-OFF B 775 1075
7-OFF 8-ON C 850 1150
7-ON 8-ON D 925 1250
4DCY4030
Switch Settings Nominal Airflow
Indoor Fan Performance 4DCY4024
Horizontal Airflow
4DCY4024-HOR DIPSWITCH SETTINGS External Static Pressure (in. wg)
AIRFLOW SETTING 1 2 3 4 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
350 CFM/TON OFF OFF OFF ON
400 CFM/TON* OFF OFF OFF OFF
450 CFM/TON OFF OFF ON OFF
Down Airflow
4DCY4024-DOWN DIPSWITCH SETTINGS External Static Pressure (in. wg)
AIRFLOW SETTING 1 2 3 4 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
350 CFM/TON OFF OFF OFF ON
400 CFM/TON* OFF OFF OFF OFF
450 CFM/TON OFF OFF ON OFF
Indoor Fan Performance 4DCY4030
Horizontal Airflow
4DCY4030-HOR DIPSWITCH SETTINGS External Static Pressure (in. wg)
AIRFLOW SETTING 1 2 3 4 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
350 CFM/TON OFF OFF OFF ON
400 CFM/TON* OFF OFF OFF OFF
450 CFM/TON OFF OFF ON OFF
Down Airflow
4DCY4030-DOWN DIPSWITCH SETTINGS External Static Pressure (in. wg)
AIRFLOW SETTING 1 2 3 4 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
350 CFM/TON OFF OFF OFF ON
400 CFM/TON* OFF OFF OFF OFF
450 CFM/TON OFF OFF ON OFF
Watts 52 66 89 115 140 164 186 206 229 259 -
CFM 706 716 727 733 731 719 700 679 662 659 -
Watts 72 94 120 148 177 207 233 254 267 290 -
CFM 786 793 805 813 813 806 793 780 778 799 -
Watts 80 99 125 153 182 211 243 284 342 - -
CFM 860 862 877 892 903 904 897 884 869 - -
Watts 35 70 90 108 131 160 188 204 225 250 -
CFM 695 729 734 728 721 715 705 679 680 685 -
Watts 79 87 105 129 155 180 206 232 264 306 -
CFM 846 807 802 810 816 813 803 794 800 846 -
Watts 86 102 127 156 185 213 242 275 319 - -
CFM 884 870 882 899 909 907 895 886 898 - -
Watts - 112 155 176 199 231 270 299 289 197 -
CFM - 867 905 904 899 904 914 907 840 650 -
Watts - 157 192 222 249 276 306 343 389 448 -
CFM - 997 1011 1012 1009 1006 1006 1006 1001 982 -
Watts - 213 252 285 317 351 382 401 396 - -
CFM - 1125 1135 1132 1133 1138 1138 1110 1017 - -
Watts - 126 152 182 211 237 263 292 333 397 497
CFM - 883 900 911 911 901 883 863 849 854 890
Watts - 158 196 224 251 283 318 344 345 295 162
CFM - 987 1004 1006 1004 1001 994 977 936 851 697
Watts - 218 254 288 321 354 390 431 480 - -
CFM - 1118 1128 1132 1131 1127 1127 1142 1183 - -
*Factory Default Setting
Auxiliary Heating Airflow, horizontal or downflow from .2 to .6” wg.
8
Indoor Blower Performance
Selection
Low Stage High Stage
7-OFF 8-OFF A 725 1000
7-ON 8-OFF B 775 1075
7-OFF 8-ON C 850 1150
7-ON 8-ON D 925 1250
4DCY4036
Switch Settings Nominal Airflow
Selection
Low Stage High Stage
7-OFF 8-OFF A 1075 1375
7-ON 8-OFF B 1100 1450
7-OFF 8-ON C 1150 1500
7-ON 8-ON D 1200 1575
Switch Settings Nominal Airflow
4DCY4042
Indoor Fan Performance 4DCY4036
Horizontal Airflow
4DCY4036-HOR DIPSWITCH SETTINGS External Static Pressure (in. wg)
AIRFLOW SETTING 1 2 3 4 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
350 CFM/TON OFF OFF OFF ON
400 CFM/TON* OFF OFF OFF OFF
450 CFM/TON OFF OFF ON OFF
Down Airflow
4DCY4036-DOWN DIPSWITCH SETTINGS External Static Pressure (in. wg)
AIRFLOW SETTING 1 2 3 4 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
350 CFM/TON OFF OFF OFF ON
400 CFM/TON* OFF OFF OFF OFF
450 CFM/TON OFF OFF ON OFF
Watts 162 173 197 226 256 285 313 343 360 - -
CFM 1058 1062 1063 1063 1062 1060 1057 1053 1010 - -
Watts 179 230 265 296 329 366 403 431 436 - -
CFM 1179 1196 1204 1206 1205 1203 1199 1194 1185 - -
Watts 318 336 365 399 435 469 502 533 - - -
CFM 1390 1376 1370 1366 1361 1354 1349 1351 - - -
Watts 169 182 210 243 273 301 331 370 433 - -
CFM 1025 1062 1068 1063 1060 1061 1064 1055 1015 - -
Watts 225 253 283 315 348 381 414 449 484 - -
CFM 1187 1201 1203 1201 1198 1197 1194 1184 1157 - -
Watts 339 357 390 424 455 483 516 571 - - -
CFM 1391 1377 1377 1375 1366 1352 1344 1360 - - -
Indoor Fan Performance 4DCY4042
Horizontal Airflow
4DCY4042A-HOR DIPSWITCH SETTINGS External Static Pressure (in. wg)
AIRFLOW SETTING 1 2 3 4 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
350 CFM/TON OFF OFF OFF ON
400 CFM/TON* OFF OFF OFF OFF
450 CFM/TON OFF OFF ON OFF
Down Airflow
4DCY4042A-DOWN DIPSWITCH SETTINGS External Static Pressure (in. wg)
AIRFLOW SETTING 1 2 3 4 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
350 CFM/TON OFF OFF OFF ON
400 CFM/TON* OFF OFF OFF OFF
450 CFM/TON OFF OFF ON OFF
*Factory Default Setting
Watts - 160 185 214 245 277 308 339 368 396 423
CFM - 1206 1211 1213 1215 1215 1214 1212 1208 1201 1190
Watts - 231 261 292 325 359 394 431 467 503 536
CFM - 1389 1398 1405 1409 1410 1408 1403 1399 1396 1399
Watts - 326 362 393 421 450 482 517 556 597 -
CFM - 1582 1592 1593 1587 1577 1566 1557 1553 1556 -
Watts - 176 203 232 262 294 325 357 388 417 443
CFM - 1207 1214 1217 1216 1213 1208 1201 1193 1185 1177
Watts - 253 290 323 355 386 420 455 491 526 558
CFM - 1405 1411 1413 1412 1407 1399 1389 1377 1366 1357
Watts - 367 379 409 446 485 522 556 591 633 -
CFM - 1599 1577 1570 1569 1566 1560 1550 1537 1528 -
Auxiliary Heating Airflow, horizontal or downflow from .2 to .6” wg.
9
Indoor Blower Performance
Selection
Low Stage High Stage
7-OFF 8-OFF A 1075 1375
7-ON 8-OFF B 1100 1450
7-OFF 8-ON C 1150 1500
7-ON 8-ON D 1200 1575
Switch Settings Nominal Airflow
4DCY4048C *090
* can be 1 or 3
Low Stage High Stage
7-OFF 8-OFF A 1375 1800
7-ON 8-OFF B 1450 1900
7-OFF 8-ON C 1525 1975
7-ON 8-ON D 1575 2075
Switch Settings Selection
4DCY4060C1115
Nominal Airflow
Indoor Fan Performance 4DCY4048
Horizontal Airflow
4DCY4048-HOR DIPSWITCH SETTINGS External Static Pressure (in. wg)
AIRFLOW SETTING 1 2 3 4 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
350 CFM/TON OFF OFF OFF ON
400 CFM/TON* OFF OFF OFF OFF
450 CFM/TON OFF OFF ON OFF
Down Airflow
4DCY4048-DOWN DIPSWITCH SETTINGS External Static Pressure (in. wg)
AIRFLOW SETTING 1 2 3 4 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
350 CFM/TON OFF OFF OFF ON
400 CFM/TON* OFF OFF OFF OFF
450 CFM/TON OFF OFF ON OFF
Watts 187 232 264 291 318 347 379 413 446 472 -
CFM 1355 1387 1396 1392 1382 1370 1360 1351 1341 1326 -
Watts 315 324 352 389 428 464 498 529 563 606 -
CFM 1603 1581 1577 1580 1583 1583 1577 1567 1558 1556 -
Watts 301 431 507 552 584 615 651 694 739 779 -
CFM 1752 1794 1812 1816 1812 1806 1800 1797 1793 1785 -
Watts 208 254 284 312 343 379 414 437 460 490 -
CFM 1337 1393 1398 1388 1383 1390 1399 1384 1380 1370 -
Watts 302 349 386 423 465 509 552 583 599 628 -
CFM 1574 1580 1585 1589 1594 1598 1601 1597 1584 1556 -
Watts 501 523 555 592 631 672 714 760 800 845 -
CFM 1847 1823 1817 1818 1820 1819 1817 1820 1815 1810 -
Indoor Fan Performance 4DCY4060
Horizontal Airflow
4DCY4060-HOR DIPSWITCH SETTINGS External Static Pressure (in. wg)
AIRFLOW SETTING 1 2 3 4 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
350 CFM/TON OFF OFF OFF ON
400 CFM/TON* OFF OFF OFF OFF
Down Airflow
4DCY4060-DOWN DIPSWITCH SETTINGS External Static Pressure (in. wg)
AIRFLOW SETTING 1 2 3 4 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
350 CFM/TON OFF OFF OFF ON
400 CFM/TON* OFF OFF OFF OFF
*Factory Default Setting
Watts 394 427 464 504 548 591 633 668 - - -
CFM 1673 1772 1799 1793 1779 1771 1767 1756 - - -
Watts 695 642 660 710 764 811 849 893 966 1108 -
CFM 2054 2036 2031 2032 2033 2031 2023 2012 2002 2000 -
Watts 443 461 493 532 571 607 642 680 - - -
CFM 1796 1741 1726 1725 1722 1712 1698 1692 - - -
Watts 740 697 715 763 819 866 892 894 872 835 -
CFM 2012 1987 1979 1977 1976 1969 1950 1913 1852 1759 -
Auxiliary Heating Airflow, horizontal or downflow from .2 to .6” wg.
10
Typical Field Wiring
11
Typical Wiring
12
Typical Wiring
13
Optional Equipment
46 3/8
17 7/8
3
3 5/8
19 1/2
2 3/16
19 1/2
14
1 1/2
38 7/8
15
35 7/8
43 3/8
BAYCURB050A Full Perimeter Roof Mounting Curb for *****024-036
The drawings on this page are prepared by the manufacturer in order to provide detail regarding job layout only. These drawings are not intended to be used as a basis to construct, build or modify the items depicted in the drawings. The manufacturer is not responsible for the unauthorized use of these drawings and expressly disclaims any liability for damages resulting from such unauthorized use.
14
56 1/8
15 7/8
3
10 7/8
19 1/2
4 3/4
19 1/2
14
41 7/8
20
1 1/2
38 7/8
53 1/8
Optional Equipment
BAYCURB051A Full Perimeter Roof Mounting Curb for *****042-060
The drawings on this page are prepared by the manufacturer in order to provide detail regarding job layout only. These drawings are not intended to be used as a basis to construct, build or modify the items depicted in the drawings. The manufacturer is not responsible for the unauthorized use of these drawings and expressly disclaims any liability for damages resulting from such unauthorized use.
15
Optional Equipment
BAYFLTR101, 201B, 1" - 2" Filter Rack
(Mounts in Filter/Coil Section)
Filter
BAYACCDOR1A & BAYACCDOR2A Hinged Filter Access Door
Replaces Filter/Coil Access Panel
The drawings on this page are prepared by the manufacturer in order to provide detail regarding job layout only. These drawings are not intended to be used as a basis to construct, build or modify the items depicted in the drawings. The manufacturer is not respon­sible for the unauthorized use of these drawings and expressly disclaims any liability for damages resulting from such unauthorized use.
16
A
B
C
D
E
Optional Equipment
BAYECON101,102A Down Discharge Economizer and Rain Hood
(Mounts Over Horizontal Return Air Opening)
HVAC Unit
A
Economizer rain hood
Economizer Unit Application Models A
Mist elimi­nator
Relief damper
Roofcurb
Outside air dampers
Return air damp­ers
Required
lter kit, order
separately
Return Duct
BAYECON101A
BAYECON102A
4TC*,WC*,YC*,DC*
*018-036
4TC*,WC*,YC*, DC*
*042-060
20.125"
24.375"
The drawings on this page are prepared by the manu­facturer in order to provide detail regarding job layout only. These drawings are not intended to be used as a basis to construct, build or modify the items depicted in the drawings. The manu­facturer is not responsible for the unauthorized use of these drawings and ex­pressly disclaims any liability for damages resulting from such unauthorized use.
BAYECON200,201A Horizontal Economizer and Rain Hood
Economizer
Gaskets (2)
Duct
Mixed Air Sensor
Rain Hood
Economizer A B C D E F
BAYECON200AA 22" 20" 16 7/8" 15 11/16 11 11/16 15
BAYECON201AA 26" 22 21/32" 19" 17 11/16 14 11/16 21-3/8
17
A
B
C
D
FULLY OPEN
2/3
1/3
FULLY CLOSED
BAYOSAH001, 002A, 25% Outside Air Damper
D
C
B
A
E
The drawings on this page are prepared by the manufacturer in order to provide detail regarding job layout only. These drawings are not intended to be used as a basis to construct, build or modify the items depicted in the drawings. The manufacturer is not responsible for the unauthorized use of these drawings and expressly disclaims any liability for dam­ages resulting from such unauthorized use.
Optional Equipment
(Replaces Filter/Coil Access Panel)
Manual Fresh Air
Model
BAYOSAH001
BAYOSAH002
Unit Application Models A B C D
4YC,WC3018-036
4TC*3018-036
4W/T/Y/DCY4024-036
4W/Y/DCZ6036
4YC,WC3042-060
4TC*3042-060
4W/T/Y/DCY4042-060
4W/Y/DCZ6048-060
22 7/16" 20 11/16" 12 3/8" 9 3/16"
25 3/16" 20 11/16" 12 3/8" 9 3/16"
BAYDMPR101,102A, 25% Motorized Outside Air Damper
(Mounts Over Horizontal Return AIr Opening)
BAYDMPR101A
Unit Application Models A B C D E
4YC,WC3018-036
4TC3018-036
4W/T/Y/DCY4024-036
4W/Y/DCZ6036
4YC,WC3042-060
BAYDMPR102A
4TC3042-060
4W/T/Y/DCY4042-060
4W/Y/DCZ6048-060
15 13/16" 11 13/16" 10 1/4" 11 1/2" 12 1/4"
18 3/16" 15 1/8" 10 1/4" 11 1/2" 12 1/4"
18
Dimensional Data
4DCY4024 through 4DCY4036 (1 of 3)
19
Dimensional Data
4DCY4024 through 4DCY4036 (2 of 3)
20
Dimensional Data
4DCY4024 through 4DCY4036 (3 of 3)
21
Dimensional Data
4DCY4042 through 4DCY4060 (1 of 3)
22
Dimensional Data
4DCY4042 through 4DCY4060 (2 of 3)
23
Dimensional Data
4DCY4042 through 4DCY4060 (3 of 3)
24
Mechanical Specifications
General
All units shall be factory assembled, piped, internally wired and fully charged with refrigerant. All units shall be de­signed to operate at outdoor ambient temperatures as high as 115°F. Cooling capacities shall be rated in accordance with A.H.R.I. standards. The 4DCY4 heat­ing/cooling unit design is certified to UL Standards 1995 and ANSI 221.47/CSA
2.3, specifically for outdoor applications using natural gas or propane. All units shall be designed for outdoor rooftop or ground level installation. Unit casing is constructed of heavy gauge, galvanized steel and painted with a weather-resistant powder paint.
Shipped for horizontal application, convertible to downflow.
Casings
All panels shall be heavy gauge steel, gasketed and insulated. Foil-faced insulation shall be in the heat exchanger section. Foil-faced insulation shall be in the evaporator section. Base pan shall be heavy gauge steel. WEATHERGUARD™ exterior corrosion resistant screws shall be used for added resistance to rust and corrosion.
Controls
Refrigeration cycle controls shall include condenser fan, evaporator fan and com­pressor contactors. Compressors shall be equipped with a combination internal winding thermostat/current overload. Internal high pressure relief shall also be provided.
Refrigeration System Compressors —
The Climatuff® compressor features in­ternal over temperature and pressure pro­tector, total dipped hermetic motor. Other features include: centrifugal oil pump, and low vibration and noise. Evaporator Coil — Internally enhanced 3/8-inch OD seamless copper tubing me chani cally bonded to aluminum fins, factory pressure and leak tested at 250 to 300 psig. All units have TXV to control refrigeration flow.
Condenser Coil —
The Spine Fin™ condenser coil shall be continuously wrapped, corrosion resistant all aluminum with minimum brazed joints. This coil is 3/8 inch OD seamless alumi­num tubing glued to a continuous alumi­num fin. Coils are lab tested to withstand 2,000 pounds of pressure per square inch. The outdoor coil provides low airflow resistance and efficient heat transfer. The coil is protected on all four sides by louvered panels.
Indoor Air Fan — Direct-drive, forward­curved, centrifugal wheel in a Composite Vortica® Blower housing. Motor shall have thermal overload protection. Perma­nently lubricated motor bearings. Motor/ blower assembly isolated from unit with rubber mounts.
Condenser Fan — Direct-drive, draw through propeller type. Weather-proofed permanent split capacitor fan motor shall have built-in thermal overload and perma­nently lubricated motor bearings.
Low Ambient — Standard refrigerant system operation down to 55°F. Low am­bient accessory required for operation to 0°F ambient condition.
Gas-Fired Heating System — Models shall provide completely assembled, wired and piped gas fired heating systems within unit. Threaded gas connection on the unit.
Electronic Ignition System — Main burner is lit each time thermostat calls for gas heat. Flame sensor proves flame and keeps the main burners on. Should a loss of flame occur, the main valve closes and the spark recurs within 0.8 second. When thermostat is satisfied, main burner is extinguished.
Forced Combustion Blower — Insures flame stability under varying wind condi­tions. Gives higher combustion efficiency and location flexibility.
Heat Exchanger — stainless steel tubes. Free floating design.
Burners — Stainless steel. Multi-port inshot.
Accessories (U.S. Domestic Models) Roof Curb — The roof curb shall
be designed to mate with the unit and provide support and complete weather-tight installation when properly installed. Curb shall ship knocked down for field assembly, and include wood nailer strips.
Modulating Economizer — This accessory shall be field installed and be composed of the following items: 0-100% fresh air damper, damper drive motor fixed dry bulb enthalpy control, and low voltage polarized plug for electrical connections. Solid state enthalpy or differential enthalpy control is optional. Economizer operations shall be controlled by the preset position of the enthalpy control. A barometic relief damper shall be standard with the economizer and provide a pressure operated damper that shall be gravity closing and prohibit entrance of outside air on equipment “off” cycle.
Manual Fresh Air Hood
Manual outside air provides a fixed out­side air quantity from 0 to 25 percent. Includes hood and birdscreen.
Low Ambient Control
Control allows cycling of compressor under low ambient cooling conditions. Required for cooling operation to 0°F.
Propane Gas Conversion Kit — For conversion from
natural gas to LP gas.
6200 Troup Highway Tyler, TX 75707-9010
10/14
The manufacturer has a policy of continuous product and product data improvement and it reserves the right
to change design and specifications without notice.
25
Loading...