Trail-Gear Rock Defense 303942-1-KIT Install Instructions Manual

InstalL Instructions

rock defense™ land cruiser rear bumper

303942-1-kit 1991-1997 toyota land cruiser and lexus lx450

kit contents

before installation

Note: There are several different trim options. Installation may vary slightly depending on your vehicle. Installation
shown in these instructions was performed on a 1997 Toyota Lexus LX450. We recommend painting or powder
coating the bumper before installation.

303946-1-ins

InstalL Instructions (Cont'd.)

recommended tools

Socket set

Punch

Hammer

Ratchet or impact wrench

Steel File

caution

ead all instructions completely and carefully before you begin.

1. R

2. Check to make sure the kit is complete and that no parts are missing (refer to the Kit

Contents Section on the first page of these instructions).

3. Park vehicle on a clean, dry, flat, level surface and block the tires so the vehicle cannot

roll in either direction.

4. This product is for off-road use only. It is recommended that the installation steps below
be performed by a competent mechanic. Buyers and users of this product hereby expressly
assume all risks associated with the installation and use of this product.