MULTI ZONE SHERPA
FITTED ELECTRIC BLANKET
SINGLE, DOUBLE, QUEEN, KING
TFMZSPEBSBA, TFMZSPEBDBA, TFMZSPEBQBA, TFMZSPEBKBA
Maximum washing temperature
SAFETY & WARNINGS
Ensure to read all instructions and warnings in this user guide prior to first use. Retain this
user guide for future reference.
Do not bleach
Do not tumble dry
Do not iron
Do not dry clean
• This electric blanket is not intended for use by persons (including children) with
reduced physical, sensory or mental capacities or lack of experience and knowledge
unless they have been given supervision or instruction concerning the use of the
electric blanket by a person responsible for their safety.
• This electric blanket is not to be used by young children unless the controls have
been pre-set by a parent or guardian or unless the child has been adequately
instructed on how to operate the controls safely.
• Children should be supervised to ensure that they do not play with the electric
blanket.
• This electric blanket must not be used by persons insensitive to heat and other very
vulnerable persons who are unable to react to overheating.
• Children under the age of 3 are not to use this electric blanket due to their inability to
react to overheating.
• This electric blanket supports voltages between 220–240V and runs at a frequency
of 50Hz. Ensure the power socket used on this electric blanket matches this.
• This electric blanket is designed to be used as an under blanket. Do not use this
blanket over your body.
• Ensure the power socket is turned off before inserting or removing the controller
cable.
• Do not forcibly pull on the controller cable when unplugging.
• Do not use any other controllers to operate this electric blanket.
• Do not allow the controller/s to touch water or any other liquid.
• Do not use the electric blanket if it is damp or wet.
• Do not use this electric blanket with another heating appliance.
Do not insert pins
Do not use folded or rucked
40°C, mild process
Not to be used by very young
children (0- 3) years
• Do not use this electric blanket on an adjustable bed.
• This electric blanket is not intended for medical use in hospitals.
• Ensure to turn the power off and unplug the controller cable when the electric
blanket is not in use or before cleaning.
• When in use, ensure the controller/s are not covered and are visible at all times.
• If the controller cable is damaged, stop use immediately and contact
help.Kogan.com for assistance.
• If the connector on the blanket has ruptured, stop use immediately and contact
help.Kogan.com for assistance.
Display
Timer button
Body button
Feet button
Auto button
On/Off switch
OVERVIEW
Controller
Note:
INSTALLATION
Fitting the electric blanket
1. Place the electric blanket on the mattress with the controller cable and controller at
the top of the mattress near the pillows. Ensure the heating elements do not emerge
from under the pillow area.
Do not use the electric blanket on top of you. This blanket is designed to be used as
an under blanket.
2. Fit the side skirts of the electric blanket around the edges of the mattress then use
the elastic skirt to ensure that the electric blanket fits snugly around the sides and
underneath the mattress.
3. Spread the skirt around the edge of the mattress ensuring even tension and the
electric blanket is placed evenly over the mattress. The electric blanket should be flat
and crease-free. Remove any creases if necessary as they may cause spots of
overheating.
Controller
• To install the controller, insert the plug into the connector on the electric blanket until
the locking tab snaps firmly into place.
• To remove the controller, lift the locking tab up with your finger and pull the plug
directly out. Do not pull the controller cable and do not try and pull the controller plug
out without lifting the locking tab as you will damage the socket.
Note:
hazard.
Note:
Note:
OPERATION
With one end of the controller cable plugged into the connector on the electric blanket,
plug the other end into a power socket and switch the socket on.
Ensure the controller cable is visible and does not cause a potential tripping
Controller
• Push the On/Off switch on the controller to the ‘ON’ position.
• Press the Body and Feet buttons repeatedly to cycle through and adjust the
temperature settings in the respective areas of the electric blanket. Temperature
settings range from 0–9 and will be shown on the display. The higher the number, the
hotter the temperature.
If the temperature setting is set between 5–9, the electric blanket will
automatically switch to temperature setting 4 after three hours to prevent
overheating.
• Press the Timer button to set the electric blanket to run for a predetermined time.
The electric blanket can be set to run between 1–12 hours. After the time has elapsed,
the electric blanket will return to standby.
• Pressing the Auto button will automatically set the electric blanket to temperature
setting 5 and operate for three hours before returning to standby.
After use
When finished, push the On/Off switch on the controller to the ‘OFF’ position and turn the
power off at the power socket. Unplug the cable from the power socket and remove the
controller from the electric blanket.
Ensure the controller is exposed to air and is not covered when in use.
Notes:
Note:
blanket.
CLEANING & CARE
Ensure the electric blanket is disconnected from the power socket and controller before
cleaning.
Hand washing (recommended)
To prolong the life of the electric blanket, it is recommended to perform hand washing as
opposed to machine washing when cleaning the electric blanket.
• Place the electric blanket in a large vessel (for example, a bathtub, large laundry sink)
with cold water mixed with either a natural wool detergent or mild soap flakes.
• Soak the electric blanket for approximately 5 minutes and then gently squeeze the
soapy water through the blanket.
• Rinse the electric blanket thoroughly with clean lukewarm water until no more suds
are visible. Allow water to drain off.
• Refer to the ‘Drying’ section of this user guide for drying instructions.
Do not use industrial solvents (for example, benzene, kerosene) to clean the electric
Machine washing
• Place the electric blanket in a washing bag and seal it.
• Use a small amount of detergent and set the washing machine to a ‘Delicate Wash’
setting with a temperature not exceeding 40°C. When washed, remove the blanket
from the washing bag.
• Refer to the ‘Drying’ section of this user guide for drying instructions.
Drying
Drape the electric blanket over a clothesline or any other well-ventilated location and allow
it to dry naturally.
• Do not dry the blanket under the sun.
• Do not use any appliances to dry the electric blanket (for example, tumble dryer,
hair dryer).
• Do not wring or iron the electric blanket.
• Do not connect the controller cable into the electric blanket when drying.
• The electric blanket must be completely dry before storing or next use.
Cleaning the controller cable
Notes:
Clean the surface of the controller cable with a neutral detergent and wipe it dry with a soft
cloth.
Care
Examine the electric blanket frequently to check that there are no signs of wear and tear or
damage. If the electric blanket is damaged, stop use immediately and contact
help.Kogan.com for assistance.
Storage
If the electric blanket has just been used, allow it to cool down.
Fold the blanket gently and store it in a cool, dry place.
• Do not use mothproofing agents on the blanket.
• Do not crease the electric blanket by placing items on top of it during storage.
TROUBLESHOOTING
Problem Solution
• Switch off the power at the power socket and
connect the controller cable to the connector on
the electric blanket.
The display is showing ‘P’.
The display is showing ‘E’.
The display is showing ‘C’.
• If the display still shows ’P’, the internal
connection of the electric blanket may be
broken. Stop use immediately and contact
help.Kogan.com for assistance.
• Switch off the power at the power socket and
restart.
• If the display still shows ‘E’, the internal
connection of the electric blanket may have
short-circuited and is damaged. Stop use
immediately and contact help.Kogan.com for
assistance.
The electric blanket is overheating. Disconnect the
controller cable from the power socket and wait until
the electric blanket has cooled down before resuming
use.
Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com
Loading...