Traeger Ironwood Series Assembly Manual
ATTACH SIDE SHELF AND GRILL HANDLE
3
This will require TWO people.
1
PLACE HEAT SHIELD AND DRIP TRAY
4
In this step: 8 In this step: 9
E
x 4 G x 4
2
Ensure the cutout is placed
toward the back of the grill.
H
x 2 I x 2
3
NOTE: The Ironwood grill
utilizes a hot rod with a
deeper contact point. It should
extend approximately 1.5"
(3.8 cm) into the repot.
Wood Fired Grills – Ironwood
ASSEMBLY
GUIDE
IMPORTANT, RETAIN FOR FUTURE
REFERENCE: READ CAREFULLY
In this step: 10 In this step: 11
1
PLACE GRILL GRATES AND CONNECT CORD CONNECT TO WIFI
5 6
In this step: 12 13 14 In this step:
1
You are ready to season your grill and get Traeger’ing!
Once you’re up and running, make sure to smoke it forward by posting photos of
your cooks using #TraegerGrills.
2
7
2
Refer to the Quick Start Guide
to connect your grill to WiFi.
PRIME YOUR GRILL
6
See the Owner's Manual for
instructions on how to prime
and season your grill.
Please read this entire manual before installation and use of this pellet
fuel-burning appliance. Failure to follow these instructions could result in property
damage, bodily injury, or even death. Contact your local building or re ofcials
about restrictions and installation inspection requirements in your area.
A MAJOR CAUSE OF FIRES IS FAILURE
TO MAINTAIN REQUIRED CLEARANCES
(AIR SPACES) TO COMBUSTIBLE
MATERIALS. IT IS OF UTMOST
IMPORTANCE THAT THIS PRODUCT
BE INSTALLED ONLY IN ACCORDANCE
WITH THESE INSTRUCTIONS.
WARNING!
Many parts of the grill will become very hot during
operation. Care must be taken to avoid burns, both during
operation and afterwards while the grill is still hot.
• Never leave the grill unattended when young children
are present.
• Never move the grill when it is operating.
• Let the grill cool thoroughly before moving or attempting
to transport.
• Grill is very heavy. Always lift grill with TWO people.
TFB89SLC
with assembly, installation, parts,
Traeger's VIP-365 Customer Service.
For English-only assistance
and customer service, contact
Phone: 1-800-TRAEGER
Email: service@traegergrills.com
Mail: Traeger Pellet Grills LLC
1215 E. Wilmington Ave.
Salt Lake City, UT 84106
traegergrills.com
TFB89SLC Ironwood US Assembly Final.indd 1 12/19/17 3:01 PM
PARTS LIST BLISTERPACK PARTS NEEDED
13
Bolt: 5/16-18 socket head (8 pcs)
A
Washer: 5/16" (16 pcs)
B
Spring Washer: 5/16" (8 pcs)
C
D
Hex Nut: 5/16-18 (8 pcs)
Bolt: 1/4-20x0.5 (8 pcs)
E
11
15
10
12
9
1
8
READ ALL INSTRUCTIONS BEFORE INSTALLING AND USING THE GRILL
Traeger’ing is more fun with friends! (No, really, you will need two people to lift the grill.)
REMOVE GRILL PARTS AND PACKAGING
1
NOTE: You should assemble grill on a clean, at
surface, as you will need to lay it on its back at
times during assembly.
1 2
This will require TWO people.
NOTE: We recommend you use the
foam packing to prop up the grill to
make attaching the legs easier.
In this step: 1
3
14
3
5
6
7
4
6
WARNING!
• When operating this grill under overhead combustibles,
a MINIMUM of 40 inches is required.
• When operating this grill, maintain a MINIMUM distance
of 12 inches from the Grill to combustibles.
IMPORTANT!
• The grill is very heavy. Always lift the grill with TWO people.
Socket-Head Stainless Steel Screw:
F
2
1/4-20x0.50 (4 pcs)
Stainless Steel Washer:
G
5/16" (4 pcs)
Bolt: 1/4-20x1.25 (2 pcs)
H
Washer: 1/4" (2 pcs)
G
Screwdriver (1 pc)
INSTALL LEGS AND BRACES
2
In this step: 2 In this step: 3
A
x 2 B x 4 C x 2 D x 2
Wrench (2 pcs)
1
2
GRILL IS HEAVY. USE TWO PEOPLE TO LIFT.
NOTE: When fastening legs to grill body, fasteners assemble in
this order: A B Leg B C D
In this step: 4
A
x 2 B x 4 C x 2 D x 2
A
x 2 B x 4 C x 2 D x 2
3
40.00"
12.00"
Hex Key (1 pc)
12.00"
OTHER TOOLS NEEDED
(NOT INCLUDED)
Utility Knife
GRAB THE 6-PACK, GET THE TOOLS, CUE THE RADIO —
In this step: 5
A
x 2 B x 4 C x 2 D x 2
4 5
In this step: 6 + E x 4 In this step: 6 + E x 4
6
IT’S ALMOST TRAEGER’ING TIME.
TFB89SLC Ironwood US Assembly Final.indd 2 12/19/17 3:01 PM
Loading...