Tradgardsteknik JF-400 User Manual

JF-400
Glastvätt
User’s Manual
Important Safety Precautions
Read all instructions before operating the device
WARNING
2. Check if the safety rope is broken or the knot is loose before operating thedevice.
3. Set danger-warning area downstairs for no-balcony window and door.
4. Battery shall be full-charged (green lamp ON) before using.
5. Do not use it in rainy or moist day.
6. Turn power on before put device onto glass.
7. Make sure appliance can stick and stand on glass surface while put onto glass.
8. Before turn power off, please hold device.
9. Do not use it on frameless glass.
10. Make sure put cleaning ring onto cleaning wheel correctly for no leakage.
11. Do not spray or pour water onto the appliance.
12. Prohibit children from using this device.
13. Remove anything on the glass. Do not use on cracked glass. Reflective or coating glass might be slightly scratched due to dirt on the glass whileoperating.
14. Keep hair, loose clothing, fingers, and all parts of body away from the openings and moving parts.
15. Do not use in areas with existed flammable or combustible liquids, gas.
Product introduction
JF-400 is a glass-cleaning robot, with a vacuum motor inside that can suckair and
stand on the glass surface. An embedded UPS (Un-interrupted PowerSystem) can prevent the robot falling from the window even when no electricalpower.
JF-400 has two special-design cleaning wheels that can freely traverse on thewindow
surface and even on the wall. The easy replaceable lint free cloth is used onboth of the cleaning wheels. Micro-fiber based cloth is used for good glass cleaning.
JF-400 has AI-Technology that can calculate path, auto-detect fringe of window,auto-
clean entire window. Also has manual mode for user operation.
Product and accessories
Device x 1 Remote controller x 1 Adapter (100~240VAC, 50~60Hz) x 1 AC power cord x 1 DC power extension cable (4 meter) x 1 Cleaning cloth x 12 Cleaning ring x 2 User manual x 1
Product features
For any kind thickness glass AI Technology Cleaning speed: 4 minutes/meter^2. 3 kinds of automatic operation modes for cleaning entire window Auto-finish. Embedded UPS (Un-interrupted Power System) Anti-dropping control algorithm Auto detect edges of window Micro-fiber cloth High strength safety rope (150Kgf) Remote control Table cleaning mode Power consumption80W Input voltage: AC100~240V, 50~60Hz
Getting to know the device
JF-400 shall always connect power cable for normal using. How to put device onto glass to start using (1) Turn on power-switch, and then make sure the fan is running. (2) Put device onto glass. (3) Check if device can stick to the glass before releasing it.
Loading...
+ 7 hidden pages