TradeQuip 9845 Owner's Manual

Battery

Power

Charge

Time

Maximum

Torque

Impact

Rate

No-Load

Speed

LED

Work Light

2x 24V Li

1 Hour

450Nm

0-3,000min

0-2,200min

Yes

Product Code: 9845

OWNER’S MANUAL

PRODUCT CODE: 9845

24V 1/2" DRIVE CORDLESS IMPACT WRENCH

Made in China to TQB Brands Pty Ltd specifications

Visit us at www.tqbbrands.com.au

Product Code: 9845

WARNING

IMPORTANT: READ ALL INSTRUCTIONS BEFORE USE

WARNING

The instructions and warnings contained in this manual should be read and understood before
using or operating this power tool. Do not allow anyone to use or operate this power tool until
they have read this manual and have developed a thorough understanding of how this tool
works. Failure to observe any of the instructions contained in the manual could result in severe
personal injury to the user or bystanders, or cause damage to the power tool and property.
Keep this manual in a convenient and safe place for future reference.

Whilst every effort has been made to ensure accuracy of information contained in this manual,
the TQB Brands Pty Ltd policy of continuous improvement determines the right to make
modifications without prior warning.

CONTENT

WARNING .....................................................................................................................................2

CONTENT ......................................................................................................................................2

SAFETY INSTRUCTIONS .................................................................................................................3

ASSEMBLY, OPERATION, PREVENTITIVE MAINTENANCE ..............................................................7

WARRANTY .................................................................................................................................12

Made in China to TQB Brands Pty Ltd specifications Page 2

Visit us at www.tqbbrands.com.au

Product Code: 9845

SAFETY INSTRUCTIONS

WARNING

FAILURE TO READ THESE WARNINGS MAY RESULT IN PROPERTY DAMAGE & PERSONAL
INJURY.

SAFETY OPERATNG INSTRUCTIONS

The term "power tool" in the warnings refers to your battery-operated
(cordless) power tool.

 Do not operate power tools in explosive atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools create sparks which may ignite the
dust or fumes.

 Keep children and bystanders away while operating a power tool. Distractions can

cause you to lose control.

 Keep work area clean and well lit. Cluttered or dark areas invite accidents.

Electrical safety

 Power tool charger plugs must match the outlet. Never modify the plug in any way.
 Avoid body contact with earthed or grounded surfaces, such as pipes, radiators,

ranges and refrigerators. There is an increased risk of electric shock if your body is
earthed or grounded.

 Do not expose this power tool or charger to rain or wet conditions. Water entering a

power tool and charger will increase the risk of electric shock.

 Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the

charger. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.

 When operating a power tool charger outdoors, use an extension cord suitable for

outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric
shock.

 If operating a power tool charger in a damp location is unavoidable, use a residual

current device (RCD) protected supply. Use of an RCD reduces the risk of electric
shock.

Personal safety

 Stay alert, watch what you are doing and use common sense when operating this

cordless power tool. Do not use a cordless power tool while you are tired or under
the influence of drugs, alcohol or medication. A moment of inattention whilst
operating cordless power tools may result in serious personal injury.

Made in China to TQB Brands Pty Ltd specifications Page 3

Visit us at www.tqbbrands.com.au

Product Code: 9845

 Use personal protective equipment. Always wear eye protection. Protective

equipment such as a hearing protection, hand protection and non-skid safety shoes
for appropriate conditions will reduce personal injuries.

 Prevent unintentional starting. Ensure the switch is in the off-position before picking

up or carrying the power tool. Carrying power tools with your finger on the switch or
energising power tools that have the switch on invites accidents.

 Do not overreach. Keep proper footing and balance at all times. This enables better

control of the power tool in unexpected situations.

 Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and

gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in
moving parts.

Power tool use and care

 Do not force the power tool. Use your power tool for the correct application. The

correct power tool will do the job better and safer at the rate for which it was
designed.

 Do not use the power tool if the switch does not turn it on and off. Any power tool

that cannot be controlled with the switch is dangerous and must be repaired.

 Disconnect the plug from the power source and/or the battery pack from the power

tool before making any adjustments, changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of starting the power tool
accidentally.

 Store idle power tools out of the reach of children and do not allow persons

unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.

 Maintain power tools. Check for misalignment or binding of moving parts, breakage

of parts and any other condition that may affect the power tool’s operation. If
damaged, have the power tool repaired before use. Many accidents are caused by
poorly maintained power tools.

Battery tool use and care

 Recharge only with the charger specified by the manufacturer. A charger that is

suitable for one type of battery pack may create a risk of fire when used with
another battery pack.

 Use power tools only with specifically designated battery packs. Use of any other

battery packs may create a risk of injury and fire.

 When battery pack is not in use, keep it away from other metal objects, like paper

clips, coins, keys, nails, screws or other small metal objects, that can make a
connection from one terminal to another. Shorting the battery terminals together
may cause burns or a fire.

 Under abusive conditions, liquid may be ejected from the battery pack; avoid

contact. If contact accidentally occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from the battery pack may cause
irritation or burns.

Made in China to TQB Brands Pty Ltd specifications Page 4

Visit us at www.tqbbrands.com.au