TradeQuip 1026 Owner's Manual
Oct-18 Product Code: 1026
Blade
Diameter
Motor
Input Out put
Max. Air
Delivery
Oscillating
Range
No of
Speeds
Fan Head
Tilt
750mm
240V 50Hz 280W
Up to 300m³/min
0º to 90º
3
15°
OWNER’S MANUAL
PRODUCT CODE: 1026
WALL MOUNT FAN
Made in China to TQB Brands Pty Ltd specifications
Visit us at www.tqbbrands.com.au
Oct-18 Product Code: 1026
WARNING
IMPORTANT: READ ALL INSTRUCTIONS BEFORE USE
WARNING
The instructions and warnings contained in this manual should be read and understood before
using or operating this equipment. Do not allow anyone to use or operate this equipment until
they have read this manual and have developed a thorough understanding of how this
equipment works. Failure to observe any of the instructions contained in the manual could
result in severe personal injury to the user or bystanders, or cause damage to the equipment
and property. Keep this manual in a convenient and safe place for future reference.
Whilst every effort has been made to ensure accuracy of information contained in this manual,
the TQB Brands Pty Ltd policy of continuous improvement determines the right to make
modifications without prior warning.
CONTENT
WARNING .............................................................................................................................. 2
CONTENT ............................................................................................................................... 2
SAFETY INSTRUCTIONS ........................................................................................................... 3
ASSEMBLY, OPERATION, PREVENTITIVE MAINTENANCE .......................................................... 4
PARTS LIST WALL FAN............................................................................................................. 7
WARRANTY ............................................................................................................................ 8
Made in China to TQB Brands Pty Ltd specifications Page 2
Visit us at www.tqbbrands.com.au
Oct-18 Product Code: 1026
SAFETY INSTRUCTIONS
SAFETY OPERATING INSTRUCTIONS
- When servicing, use only TradeQuip identical replacement parts. Use of any other
parts will void the warranty.
- Ensure the Wall Mount Fan is disconnected from power before servicing.
- Use the right product for the job. There are certain applications for which the Wall
Mount Fan was designed.
- Do not modify the Wall Mount Fan and do not use the Wall Mount Fan for a
purpose for which it was not intended.
CAUTION WITH WALL FITMENT INSTRUCTIONS
Installation of the wall bracket support arm:
The bent support arm can be installed upward or downward. In both cases, the longest
locking bolt must penetrate the small hole at the end of the bent part in order to avoid
falling off the wall.
Assembly and installation:
For convenient transportation, the supporting arm of the wall mount fan is disassembled
in packing. Please ensure you assemble and install the fan according to the drawings of
this manual.
WALL MOUNT INSTRUCTIONS
Made in China to TQB Brands Pty Ltd specifications Page 3
Visit us at www.tqbbrands.com.au
Loading...