TradeQuip 1003 Owner's Manual
Product Code: 1003
OWNER’S MANUAL
PRODUCT CODE: 1003
90 LITRE PARTS WASHER
Tank Dimensions
Max. Fluid
Capacity
Min. Fluid
Capacity
Pump Type
Pump Flow
Rate
Overall Dimensions
758x527x275mm
45 Litres
18 Litres
240V 50Hz
3.15L per min
780x540x908mm
Product Code: 1003
Page 2
WARNING
IMPORTANT: READ ALL INSTRUCTIONS BEFORE USE
WARNING
The instructions and warnings contained in this manual should be read and understood before
using or operating this equipment. Do not allow anyone to use or operate this equipment until
they have read this manual and have developed a thorough understanding of how this
equipment works. Failure to observe any of the instructions contained in the manual could
result in severe personal injury to the user or bystanders, or cause damage to the equipment
and property. Keep this manual in a convenient and safe place for future reference.
Whilst every effort has been made to ensure accuracy of information contained in this manual,
the TQB Brands Pty Ltd policy of continuous improvement determines the right to make
modifications without prior warning.
CONTENT
WARNING .....................................................................................................................................2
CONTENT ......................................................................................................................................2
SAFETY INSTRUCTIONS .................................................................................................................3
ASSEMBLY, OPERATION, PREVENTITIVE MAINTENANCE ..............................................................4
PARTS LIST ....................................................................................................................................6
WARRANTY ...................................................................................................................................7
Product Code: 1003
Page 3
SAFETY INSTRUCTIONS
SAFETY OPERATING INSTRUCTIONS
Always wear suitable protective clothing, gloves and goggles.
Clean off any accidental splashes of parts cleaning fluid on the skin.
Follow cleaning fluid manufacturer's instructions carefully.
Always check for damage. Before using the washer, any damaged part, should be
checked to ensure that it will operate properly, and perform its intended function. Any
damage should be repaired or the part replaced.
Always disconnect the parts washer from the power supply before carrying out any
maintenance or cleaning of the parts washer unit.
Always keep work area clean. Cluttered areas and benches invite accidents.
Always keep children away. All visitors should be kept a safe distance from the work area,
especially whilst operating the machine.
Always ensure the switch is off before plugging in to mains. Avoid accidental starting.
When servicing, use only TradeQuip identical replacement parts. Use of any other parts
will void the warranty. Ensure the parts washer is disconnected from power before
servicing.
Use the right product for the job. There are certain applications for which the Parts
Washer was designed. Do not modify the Parts Washer and do not use the Parts Washer
for a purpose for which it was not intended.
Loading...