Trademaster TBG75, TBG150 Instruction Manual

www.industrialtool.com.au

®

BELT GRINDER

INSTRUCTION

MANUAL

READ CAREFULLY AND UNDERSTAND THESE INSTRUCTIONS BEFORE USE.

LIMITED WARRANTY

PRIOR TO OPERATION

Industrial Tool & Machinery Sales (hereinafter
refered to as ITMS) will, within twelve (12)
months from the original date of purchase,
repair or replace any goods found to be
defective in materials or workmanship.
This warranty is void if the item has been
damaged by accident, neglect, improper
service or other causes not arising out of
defects in materials or workmanship. This
warranty does not apply to machines and/or
components which have been altered,
changed, or modified in any way, or
subjected to overloading or use beyond
recommended capacities and specifications.
Worn componentry due to normal wear and
tear is not a warranty claim. Goods returned
defective shall be returned prepaid freight to
ITMS or agreed repair agent, which shall be
the buyer’s sole and exclusive remedy for
defective goods. ITMS accepts no additional
liability pursuant to this guarantee for the
costs of travelling or transportation of the
product or parts to and from ITMS or the
service agent or dealer, such costs are not
included in this warranty.
The manufacturer reserves the right to make
improvements and modifications to design
without prior notice.

Imported & Distributed By

Industrial Tool & Machinery Sales
18 Business St, Yatala, QLD 4207
PH: 07 3287 1114 FX: 07 3287 1115

[e-mail]
www.industrialtool.com.au

1. Power source; ensure that the power
source to be used conforms to the power
requirements specified on the name plate.

2. Power switch; ensure that the power
switch is in the OFF position before any
power is supplied to the machine.

3. Extension cord; when an extension cord
must be used, ensure it is of sufficient
thickness and rated capacity, and kept in the
shortest length possible while remaining
practical.

SAFETY PRECAUTIONS

Warning! When using electric tools basic
safety precautions should always be
followed to reduce the risk of fire , electric
shock and personal injury, including the
following.

Safety - Environment

1. Keep work area clean. Cluttered areas and
benches invite injury.

2. Keep children and unauthorised persons
away from the tool. Keep tool in work area
with authorised trained personnel to use
machine.

3. Power tools must be used in dry areas only.
When using power tools outdoors, use
suitable extension cord.

1

Safety - Personal

1. Dress properly, do not wear loose clothing
or jewellery, they can invite personal injury.
Always cover long hair.

2. When operating power tools suitable
personal protective equipment must be
worn where necessary, including, but not
restricted to eye, ear, respiratory and foot
protection.

3. Stay alert, do not use power tools when
tired or under the influence of alcohol, drugs
or medicine as injury may occur.

Safety - Operation

1. Keep proper footing and balance at all
times when using tool.

2. Keep hands away from grinding area while
machine is in operation.

MAINTENANCE

Replacement Of Abrasive Belt

1. Disconnect Belt Grinder from power
source

2. Inspect the replacement belt and ensure
there are no fractures or damage.

3. Remove the suction housing ↓

3. Ensure oscillating points of the grinder are
securely fastened before use.

3. Guards must be in place and in working
order. Remove adjusting keys and wrenches
before turning on.

Safety - After Use

1. Disconnect machine from power when not
in use.

2. Store machine in a dry place, well out of
reach of children.

2

4.Remove the fastening screws, open the
protective cover and the cover of the surface
grinding area ↓