TRUCK LOADER
Models 2000-IC, 2000-R2100
Operating and Assembly Manual
Midwest Equipment Manufacturing, Inc.
5225 Serum Plant Road,
Thorntown, IN 46071
6-29-16
1
2
1
23
3
4
5
6
7
11
12
13
14
27
30
28
29
Model 2000-IC Truck Loader Parts List
12-09-15
36
36
34
24
25
32
16
17
18
31
22
21
8
20
22
15
33
37
19
17
2
3
Model 2000-IC, Parts List
Key Part No. Description
1 20011 Frame, Loader
2 20012 Hitch, Tailgate Mount (optional)
3 20016 T-Handle
4 86022 Engine, 305CC Briggs Intek IC
86028 Engine, 9HP Robin-Subaru
5 20020 Turbine Housing
6 86040 Turbine
7 20022 Inlet
8 86107 Washer, Turbine
11 20028 Intake Guard
12 20030 Exhaust Hose
13 20031 Quick Clamp
14 20035 Discharge Deflector
15 32108 Spring
16 20036 Hose Support
17 20037 Hose Support Extension
18 20039 Hose Clamp
19 20038 Intake Nozzle
20 18121 8” Hose Clamp
21 20040 Intake Hose, 8” x 12 ½’
22 18119 8” Hose Clamp
23 45107 Handle Grip
24 20032 Support Bracket
25 46218 Clevis Pin, Vert. Support
27 20013 Hitch, Step Bumper (optional)
28 20017 Bracket, Step Bumper
29 20014 Swing arm
30 45104 Axle
31 20021 Liner, 8” Turbine Housing
32 86027 Spacer, Turbine Housing
33 85226 Bent Pin, 5/8”
34 20023 Tailgate Hanger
35 200153 Tailgate Pad
36 20029 Nylon Acorn Nut
37 20052 Bracket, Turbine Support, 2000-IC
4
Model 2100 11 HP Truck Loader Parts List
Key Part Description
1 20011 Frame, Loader
2 20012 Hitch, Tailgate Mount (optional)
3 20016 T-Handle
4 20120 11 HP B&S Engine IC (pull start)
5 20060 Turbine Housing, 2100
6 20021 Liner
7 20050 Turbine, 2100
8 20070 Inlet, 2100
9 20028 Intake Guard
10 20030 Exhaust Hose
11 20031 Quick Clamp, 9”
12 20035 Discharge Deflector
13 32108 Spring
14 20036 Hose Support
15 20037 Hose Support Extension
16 20039 Hose Clamp
17 20038 Intake Nozzle
18 18121 8” Hose Support Ring
19 20040 Intake Hose, 8” z 12 ½’
20 18009 8” Hose Clamp
21 45107 Handle Grip
22 20013 Hitch Step Bumper (optional)
23 20017 Bracket, Step Bumper Hitch
24 20014 Swing arm receiver
25 45104 Axle
26 18114 Muffler, B&S 394170
27 86027 Spacer, Turbine Housing
28 85226 Draw Pin
29 20023 Tailgate Hanger
30 200153 Tailgate Pad
31 20029 Nylon Acorn Nut
32 20051 Bracket, Turbine Support, 2100
33 20031 Support Bracket
34 46218 Clevis Pin, Vert. Support
35 86102 Quick Connector, 8”
5
2
1
21
3
5
7
8
9
10
11
12
27
30
28
29
Model 2100 Truck Loader Parts List
12-09-15
31
30
29
33
34
27
14
15
16
6
19
20
19
18
20
13
28
32
4
35
6
7
Operating Proced ure
Midwest Equipment Manufacturing, Inc. will repair or replace, free of charge, any part or parts that are
1. Follow engine manufacturer’s instr uctions in preparing engine for operation.
2. Inspect area to be vacuumed and pick up all harmful objects.
3. Periodically tighten all hardware.
4. Listen for unusual vibration of engine or air turbi ne. If excessive vibration is
present, STOP engine and check for damaged blad e .
5. Always shut off vacuum before servicing.
6. When rem oving clogs, SHUT OFF ENGINE.
defective in material or workmanship or both for a period of one year residential use, and 90 days for
commercial and rental use. The purchaser will pay transportation charges on parts submitted for
replacement under warranty. For warranty service, contact your local dealer from whom the unit was
purchased. There are no other express or implied warranties. Some states do not allow limitations on
how long an implied warranty lasts, and some states do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation and exclusion may not apply to you. This
warranty gives you specific legal rights, which vary from state to state.
TRAC VAC WARRANTY POLICY
MIDWEST EQUIPMENT MANUFACTURING, INC.
5225 Serum Plant Rd.
Thorntown, IN 46071
Phone: 1-800-Trac-Vac
Web Page: www.trac-vac.com E-Mail: sales@midmfg.com
Loading...