4500lb.Winch
User Manual & Operating Instructions
Performance Specifications
Max Line Pull
4500lbs.(2041kgs)
Gear reduction ratio
166:1
Motor
Permanent magnet DC12V motor with 1.5hp output
Overall Dimensions
16.38in.( 416mm) L × 4.92in.( 125mm) W × 4.85in.( 123 mm) H
Drum size
2in.( 50.4mm) D × 4.9in.( 125 mm) L
Cable
47.6ft.(14.5m) L of 15/64in.(6mm) D
Net weight
33.9lbs.(15.4kgs)
Product Overview
This winch is equipped with a permanent magnet motor and is designed for
intermittent duty general use. This winch is not to be used for industrial lifting or
moving people. Improper operation could damage the winch and void the warranty.
Free spool clutch is operated by a pull and turn knob, which disengages the gearbox,
allowing the cable to be released.
Tractor Supply Company ○R 0
www.tractorsupply.com For customer support call 1-888-376-9601 0
INSTALLATION
Correct installation of the winch is required for proper operation.
l Mount the winch on the vehicle or other fixed installation by using a
screw(M8×1.25×25mm), M8 nut, Φ8 flat washer and Φ8 spring washer(four sets).
WARNING: This winch must be mounted with the cable in an under wound direction.
Improper mounting could damage the winch and void the warranty.
Connect the red wire to the positive terminal and the black wire to the negative
terminal of the battery.(See Fig. 1).
Fig. 1
l Check the rotation direction of the drum. Pull and turn the clutch knob to the
“FREE SPOOL” position (drum should turn freely by hand). Pull out some cable
from the drum, and then turn the clutch knob to the “ENGAGE” position. Press the
“OUT” button on the ATV/UTV switch; if the cable is releasing then it is properly
connected. Otherwise reverse the wire connections to the motor, and repeat the
above-mentioned operation.
www.tractorsupply.com For customer support call 1-888-376-9601 1 2
The ATV mounting
The UTV mounting
Remove the screws Remove the lid
Put the switch in
Take off the switch
Dashboard
www.tractorsupply.com For customer support call 1-888-376-9601 2 2