TracRac SKU# 00-25850, ConTractor 00-25850 Series Installation Manual
SKU# 00-25850 Series
Installation Manual
Trac Rac, Inc.
994 Jefferson Street • Fall River, MA 02721
800.501.1587
www.tracrac.com
NOTES:
For good perf ormance and safety, we recom mend re-torquing all clamps and fas teners to the proper speci fications afte r the first 50 0
miles and every 5 000 miles th ereafter.
Carryin g high loads over rough roads with e xcess speed may damage the system o n your truck. Exercise go od judgement at all times.
Please call us with quest ions or concerns: 800 .501.1587 or email: info@ tracrac.com
2 Contractor Rac Pro
INSTRUCTION MANUAL
TracRac Inc. 994 Jefferson Street, Fall River, MA 02721-4893 • 800-501-1587
Installation Notes :
• Contract or Rac Pro mounts onto t he side rails of your truck wi thout drilling.
• Installation is st raight forward, and s hould take approximatel y 45 minutes to comple te.
1. Verify tha t you have received the correct par ts using the assembl y drawing and packing list .
Contractor Rac Pro
2. Instal l the cleat using two bol ts (3/16” A llen
Wrench). Loosely att ach bottom of the corner
braces to all four upri ghts using hex bolt
(16mm socket) .
Table 1. Tools Required
1) Socket Wrench
2) 13mm, 15mm , 16mm
and 17mm Sockets
3) 5mm Al len Wrench
4) 3/ 16” and 5/16”
Allen Wrench
Recommended
1) Torque Wrench
Figure 2. Cleat and Corner Brace installation.
Figure 1. Contractor Rac Pro Installed on a truck bed.
Item
No.
1
2
3
4
5
Qty.
1
2
1
1
1
Table 2. Cleat and Corne r Brace Parts
Description
Cleat
Bolt 1/4-20X1.75
Corner Brace
Hex Bolt,
M10-1.5X2 5
Heavy Washer,
M10, THICK
Part No.
PI-11009
HD-80 136
01-220 08
HD-2314 3-1
HD-2319 3
1
UPRIGHT
2
3
45
Contractor Rac Pro
INSTRUCTION MANUAL
7
TracRac Inc. 994 Jefferson Street, Fall River, MA 02721-4893 • 800-501-1587
Figure 13. Upright Parts.
Item
No.
1
2
3
4
5
6
Qty.
1
2
1
1
2
2
Table 7. Upright Part Refe rence
Description
Cleat
Bolt 1/4 -20X1.75”
Nut Bar
Spacer, Cantilever
Bushing, Oval Tube
Hex Flange Bolt , M8X1.25, 5 0mm
Part No.
PI-11009
HD-80 136
FX-11139
PI-23 327
FX-9 0138
HD-23163-1
Figure 14.
Cantilever
Clamp Parts.
Item
No.
1
2
3
4
Qty.
1
1
1
4
Table 8. Cantilever Clam p Part Reference
Description
Cantilever Clamp
Label, TracRac
Lock Nut M10X1.5
Bolt, M10X1.5, 35mm Hex
Part No.
01-11144
BL-22000-D
HD-2317 9
HD-2316 5
Figure 15. Forward
Bracket Parts.
Figure 16. Tie Down Kit.
Item
No.
1
2
3
Qty.
1
1
2
Table 9. Forward Br acket Part Reference
Description
Nut Bar
Bracket, Forward
Bolt, M8X1.25, 16mm Hex Flange
Part No.
FX-11139
01-11142
HD-2316 3
Item
No.
1
2
3
Qty.
2
2
2
Table 10. Tie Down Kit Par t Reference
Description
Tie Down Zinc Diecast
Knob, Female 3/8-16 UNC
T-Bolt #3 /8-16X1-1/8, S S
Part No.
10-25111
KB-9 0004
HD-80 122
NOTES: Although the Con tractor Rac is capable of carrying a maxim um of 1250 lbs, evenly distribut ed between both racks,
the capability is limi ted to the strength of the tru ck sidewall it is mounted on. More infor mation on back cover.
1
UPRIGHT
2
3
4
5
6
4 1
3
2
1
2
3
1
2
3
Loading...