TracRac 00-25850 User Manual
NOTES:
For good performance and safety, we recommend re-torquing all clamps and fasteners to the proper specifications af ter the first 500
miles and every 5000 miles thereafter.
Carrying high loads over rough roads with excess speed may damage the system on your truck. Exercise good judgement at all times.
Please call us with questions or concerns: 800.501.1587 or email: info@tracrac.com
Installation Manual
Trac Rac, Inc.
994 Jefferson Street • Fall River, MA 02721
800.501.1587
www.tracrac.com
SKU# 00-25850 Series
Installation Notes:
• Contractor Rac Pro mounts onto the side rails of your truck without drilling.
• Installation is straight forward, and should take approximately 45 minutes to complete.
1. Verify that you have received the correct parts using the assembly drawing and packing list.
Contractor Rac Pro
Table 7. Upright Part Reference
4
5
3
2
Item
No.
1
2
3
Qty.
1
2
1
Part No.
PI-11009
HD-80136
FX-11139
Description
Cleat
Bolt 1/4-20X1.75”
Nut Bar
Figure 1. Contractor Rac Pro Installed on a truck bed.
Table 1. Tools Required
1) Socket Wrench
2) 13mm, 15mm, 16mm
and 17mm Sockets
3) 5mm Allen Wrench
4) 3/16” and 5/16”
Allen Wrench
Recommended
1) Torque Wrench
6
1
UPRIGHT
Figure 13. Upright Parts.
Table 8. Cantilever Clamp Part Reference
Item
1
1
1
4
Part No.
01-11144
BL-22000-D
HD-23179
HD-23165
Description
Cantilever Clamp
Label, TracRac
Lock Nut M10X1.5
Bolt, M10X1.5, 35mm Hex
No.
1
2
3
4
Qty.
4
5
6
1
2
2
PI-23327
FX-90138
HD-23163-1
Figure 14.
Cantilever
Clamp Parts.
Figure 16. Tie Down Kit.
Spacer, Cantilever
Bushing, Oval Tube
Hex Flange Bolt, M8X1.25, 50mm
4 1
3
2
2
2. Install the cleat using two bolts (3 /16” Allen
Wrench). Loosely attach bottom of the corner
braces to all four uprights using hex bolt
(16mm socket).
Table 2. Cleat and Corner Brace Parts
Item
No.
1
2
3
4
Qty.
1
2
1
1
Part No.
PI-11009
HD-80136
01-22008
HD-23143-1
Description
Cleat
Bolt 1/4-20X1.75
Corner Brace
Hex Bolt,
M10-1.5X 25
5
1
HD-23193
Heavy Washer,
M10, THICK
2 Contractor Rac Pro
INSTRUCTION MANUAL
1
Figure 2. Cleat and Corner Brace installation.
UPRIGHT
3
1
2
Figure 15. Forward
3
Bracket Parts.
2
Table 9. Forward Bracket Part Reference
Item
Qty.
1
1
2
Part No.
FX-11139
01-11142
HD-23163
Description
Nut Bar
Bracket, Forward
Bolt, M8X1.25, 16mm Hex Flange
3
No.
1
2
3
1
45
Table 10. Tie Down Kit Part Reference
Item
2
2
2
Part No.
10-25111
KB-90004
HD-80122
Tie Down Zinc Diecast
Knob, Female 3/8-16 UNC
T-Bolt #3/8-16X1-1/8, SS
No.
1
2
3
Qty.
Description
NOTES: Although the Contractor Rac is capable of carrying a maximum of 1250 lbs, evenly distributed between both racks,
the capability is limited to the strength of the truck sidewall it is mounted on. More information on back cover.
TracRac Inc. 994 Jefferson Street, Fall River, MA 02721-4893 • 800-501-1587
TracRac Inc. 994 Jefferson Street, Fall River, MA 02721-4893 • 800-501-1587
Contractor Rac Pro
INSTRUCTION MANUAL
7
Loading...