Datasheet TBL Datasheet (TRACOPOWER)

Features

UL 1310 UL 508

CB

Scheme

IEC/EN 60950-1

◆ Low profile case, module height only 55mm

◆ Fits into flat control panels used in

building automation

◆ Safety class ll product

◆ UL 1310 class II, NEC class 2 compliance

◆ UL508 listed

◆ 5 power ranges from 15 to 150 W

◆ Universal input range 85 to 264 VAC

◆ Operating temperature range:

–25 °C to +70 °C max.

◆ Adjustable Output Voltage

◆ Short circuit and overload protection

Industrial Power Supplies

TBL Series, 15 to 150 Watt

◆ DC–OK indicator

◆ Easy snap-on mounting on DIN-rail

◆ 3 year product warranty

The TBL series is a new range of small DIN-rail mount power supplies which have
been designed particularly with building- and factory automation applications in
mind. The ultra-compact low profile cases fit in the standardized wall mounted con­trol panels used in the building automation industry. The power supplies can be
operated at full load across an ambient temperature range of –25°C to +60°C with­out need of additional cooling. Universal input voltage range and full compliance
with all important safety and EMC standards qualifies the TBL series power sup­plies for worldwide markets. For commercial and residential applications requesting
safety class ll the product is approved to UL 1310.

Models

Order Code Output Power

(max.)

TBL 015-105 12 W 5.0 VDC 2.4 A
TBL 015-112 12 VDC 1.25 A
TBL 015-124
TBL 030-112 12 VDC 2.5 A
TBL 030-124
TBL 060-112 12 VDC 4.5 A
TBL 060-124
TBL 090-112 12 VDC 6.0 A
TBL 090-124
TBL 150-124 150 W 24 VDC 6.25 A

15 W

30 W

60 W

90 W

Output Voltage*

(nom.)

24 VDC 0.63 A

24 VDC 1.25 A

24 VDC 2.5 A

24 VDC 3.75 A

* adjustable

Output Current

(max.)

http://www.tracopower.com Page 1 of 3

Industrial Power Supplies

TBL Series 15 to 150 Watt

Input Specifications

Input voltage – nominal 100 – 240 VAC
– AC range 85 – 264 VAC (output power derating 5 %/V
for opertion below 90 VAC)

Input frequency 47 – 63 Hz
Harmonic limits EN 61000-3-2, Class A
Efficiency at 230 VAC (typ.) – TBL 015-105 model: 73 %

– TBL 015 / 030 models: 81 %
– TBL 150 model: 87 %
other models: 85 %

Output Specifications

Output voltage adjustable range 5 VDC model: 5.0 – 5.2 VDC
12 VDC models: 12 – 16 VDC
24 VDC models: 24 – 28 VDC

Output regulation 1 %
Ripple and noise (20MHz bandwidth) < 100 mV pk-pk
Electronic short circuit protection current limitation at 100 – 150 % typ.

(automatic recovery)
Hold-up time 115 VAC 230 VAC

min. 10 ms min. 20 ms

General Specifications

Temperature ranges – Operating – 25 °C to +70 °C max.
Power derating 2.5 %/K above 60 °C
Humidity (non condensing) 5 – 95 % rel. H
Temperature coefficient 0.02 %/K
Safety standards UL 508, UL 1310, class II

IEC/EN 60950-1, UL 60950-1, EN 50178,
EN 60204, EN 61558-2-8
CSA C22.2 No. 60950-1 2003

Safety approvals – CB report IEC/EN 60950 -1
report in process
– UL approval UL 508 listed, www.ul.com -> certifications
UL 1310, www.ul.com -> certifications

File no. to be adviced

– CSA certification UL 60950-1, CSA 60950-1-03

report in process

– GS certification EN 60950-1, EN 60204, EN 61558-2-8
report in process

Electromagnetic compatibility (EMC), emissions EN 61000-6-3
– Conducted RI suppression on input EN 55022 class B
– Radiated RI suppression EN 55022 class B

Electromagnetic compatibility (EMC), immunity EN 61000-6-2
– Electrostatic discharge (ESD) EN 61000-4-2 4 kV / 8 kV
– Radiated RF field immunity EN 61000-4-3 3 V/m
– Electrical fast transient / burst immunity EN 61000-4-4 1 kV / 0.5 kV
– Surge immunity line – ground EN 61000-4-5 2 kV
– Surge immunity line – line EN 61000-4-5 1 kV
– Surge immunity output EN 61000-4-5 0.5 kV
– Immunity to conducted RF disturbances EN 61000-4-6 3 V
– Mains voltage dips and interruptions EN 61000-4-11 30 % /10 mS, 60 % /100 mS

http://www.tracopower.com Page 2 of 3

J

enatschstrasse 1 · CH-8002 Zurich · Switzerland

Tel. [phone] · Fax [phone] · [e-mail] · www.tracopower.com

Industrial Power Supplies

Vadj

59.5 (2.34)

37.1 (1.46)

21.1 (0.83)

69.5 (2.74)

45.0 (1.77)

89.5 (3.52)

54.5 (2.15) W

TBL Series 15 to 150 Watt

General Specifications

Safety class degree of protection class II
Case protection IP 20 (IEC 60529)

Environment – Vibration acc. IEC 60068-2-6; 3 axis, sine sweep, 10 – 55 Hz, 0.075 mm
– Shock acc. IEC 60068-2-27 3 axis, 15 g half sine, 11 ms

Enclosure material plastic FR2010-110C (UL 94V-0 rated)
Mounting DIN-rails as per EN 50022-35x15/7.5

(snap-on with self-locking spring)

Connection screw terminals with combi-type screw heads
for wire size 0.5 – 1.5 mm²

Installation instructions www.tracopower.com/products/tbl_inst.pdf

Case Dimensions

AC Input
DC Output
DC Output

Model Width (W) Weigth*
TBL 015
TBL 030
TBL 060
TBL 090
TBL 150

26.3 (1.04) 100 (3.53)

52.5 (2.07) 160 (5.64)

70.0 (2.76 230 (8.11)

105.0 (4.13) 340 (12.0)
175 (6.89) tba

Dimensions in [mm], () = Inch
Tolerances: ±0.5 mm (±0.02)

Wiring

Description Wire size

all models: L, N only (2 pin terminal) AWG 26 – 16 / 1.5 mm² max.

15 – 30 W models: single terminal AWG 26 – 14 / 1.5 mm² max.

60 – 150 W models: double terminal AWG 26 – 14 / 1.5 mm² max.

Specifications can be changed any time without notice.

Rev. 04/08

Page 3 of 3