
AC/DC Power Module TMPS 05 Series, 5 Watt
◆
PCB Power module in 1" x 1" package
◆ Certified to EN60335-1 for household
appliance.
◆ No load input power <300 mW
to comply with ErP directive
◆ Operating temperature range
–25°C to +70°C
◆ EMI meets EN 55022 class B and
EN 55014 -1
◆ Protection class II prepared
◆ 3-year product warranty
U L 6 0 95 0 -1
The TMPS-05 series comprises ultra compact AC/DC power supply modules in
lightweight fully encapsulated plastic casing for PCB mount. Beside the safety
approvals for industrial and IT solutions, they are also certified to EN 60335 for
household appliance. These 5 Watt modules are the ideal solution for low power
or segregated circuits when space is critical or for an efficient powering of a
standby mode when compliance to ErP directive is required. A peak current of
130% facilitates the activation of main circuits.
Models
Order code Output power max. Output Voltage
TMPS 05-103
Models
TMPS 05-105
TMPS 05-109
TMPS 05-112
TMPS 05-115
TMPS 05-124
TMPS 05-148
1)
< 30 s with maximum duty cycle of 10%, average output power must not exceed 5 W
5 W
3.3 VDC 1515 mA 1970 mA 74 %
5.0 VDC 1000 mA 1300 mA 80 %
9.0 VDC 555 mA 721 mA 82 %
12 VDC 416 mA 540 mA 82 %
15 VDC 333 mA 433 mA 83 %
24 VDC 208 mA 270 mA 83 %
48 VDC 104 mA 135 mA 85 %
Output Current
max.
peak
1)
Efficiency
http://www.tracopower.com Page 1 of 3

TMPS 05 Series, 5 Watt
Input Specifications
Input voltage ranges – AC input 85 – 264 VAC
– DC Input 120 – 370 VDC
Input frequency 47 – 63 Hz
Input current at full load (115 VAC / 230 VAC nominal input) 110 mA typ.
No-Load power consumption 300 mW max.
Output Specifications
Voltage set accuracy ±2 % max.
Minimum load no minimum load required
Ripple and noise (20 MHz bandwidth) 3.3 and 5 VDC models: 60 mVp-p max.
other models: 1% mVp-p max. of nominal Vout
Regulation – Input variation 1 % max.
– Load variation 1 % max.
Hold-up time 8 ms typ. (at 115 VAC and full load)
40 ms typ. (at 230 VAC and full load)
Over voltage protection max. 190 % of nominal Vout
Current limitation at 150 % typ. (autorecovery)
(operation under over-load conditions may cause damage)
Short circuit protection hiccup, automatic recovery
Max. capacitive load 3.3 VDC model: 2200 µF
5.0 VDC model: 1000 µF
9.0 VDC model: 300 µF
12 VDC model: 160 µF
15 VDC model: 100 µF
24 VDC model: 43 µF
48 VDC model: 10 µF
General Specifications
Temperature ranges – Operating (20 LFM convection cooling) –25°C to +70°C
– Power derating above +50°C 2.5 %/K
– Storage (non operating) –40°C to +85°C
Temperature coefficient 0.05 %/°C
Humidity (non condensing) 95 % rel max.
Switching frequency (pulse width modulation PWM) 65 kHz typ.
Isolation voltage (60 sec.) – Input/Output 3‘000 VAC
Isolation resistance (500 VDC) >100 M O hm
Reliability /calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) 628‘000 h
Electromagnetic compatibility
(EMC), emissions – Conducted and radiated input suppression EN 55011/22, class B, FCC part 15, level B
EN 55014-1,
Electromagnetic compatibility EN55014-2; EN55024
(EMC), immunity – Electrostatic discharge ESD IEC / EN 61000-4-2, 8 kV / 4kV criteria A
– RF field immunity IEC / EN 61000-4-3, 10 V/m criteria A
– Electrical fast transients/burst immunity IEC / EN 61000-4-4, 2 kV DC criteria A
– Surge IEC / EN 61000-4-5, 1 kV criteria A
– Conducted RF IEC / EN 61000-4-6, 10 Vrms criteria A
– Magnetic field immunity IEC / EN 61000-4-8, 30 A/m criteria A
– Voltage dip and interruptions IEC / EN 61000-4-11
30%, 10ms perf. criteria A
95%, 5000ms perf. criteria B
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless other wise stated.
http://www.tracopower.com Page 2 of 3

TMPS 05 Series, 5 Watt
1
5.08
(0.20)
Ø
0.6
(
Ø
0.02)
10.16
(0.40)
2
543
2.54
(0.10)
25.4
(1.00)
25.4
(
1.00)
16.3
(0.64)
5.08
(0.20)
20.3
(0.80)
2.54
(0.10)
10.16
(0.40)
25.4
(1.00)
General Specifications (continued)
Protection class II prepared according IEC/EN 60536
Safety standards IEC/EN 60950-1, UL 60950-1
EN 60335-1
Safety approvals – certification documents (pending) www.tracopower.com/overview/tmps05
Environmental compliance – Reach (pending) www.tracopower.com/products/reach-declaration.pdf
– RoHS RoHS directive 2011/65/EU
Physical Specifications
Casing material plastic resin + fiberglass (UL 94V-0 rated)
Pin tinned copper
Weight 19.7 g (0.69 oz)
Outline Dimensions
Pin-Out
Pin
1
2
3
4
5
*internally not connected but
keep it isolated from primary
circuit
AC(N)
AC(L)
NC*
-Vout
+Vout
© Copyright 2016 Traco Electronic AG Specifications can be changed without notice!
Dimensions in[mm], () = Inches
Tolerances = 0.5mm (0.01)
Pin diameter ø 0.6 mm (0.02 ± 0.004)
Rev. Octo ber 5. 2016
Page 3 of 3