TRACO TEN5-2411, TEN5-2410, TEN5-1223, TEN5-1221, TEN5-1222 Datasheet

Features

Wide 2:1 Input Range
Full SMD-Design
High Power Density
High Efficiency up to 86%
Regulated Outputs
I/O-isolation 1’500 VDC
Indefinite Short-Circuit Protection
Input Filter meets EN 55022, Class A

and FCC, Level A without external
Components

Shielded Metal Case with insulated
Baseplate

24-pin DIP with Industry Standard
Pinout

High Reliability , MTBF >1 Mio. h
2 Year Product Warranty

DC/DC Conver ter

TEN 5 Series 6 Watt

The TEN 5 Series is a range of DC/DC-converter modules with wide
input range of 2:1. State of the art SMD-technology guarantees a product
with very high reliability and good cost /performance ratio. High
efficiency allows an operating temperature range of -40°C to +75°C
without derating. I/O-isolation of 1’500 VDC together with conducted
noise compliance to EN 55022-A and FCC, level A makes these
converters ideal for a wide range of applications in communications,

mobile battery powered equipments and industrial systems.

Models

Ordercode Input voltage range Output voltage Output current max. Efficiency typ.

TEN 5-1210 3.3VDC 1200 mA 77 %
TEN 5-1211 5 VDC 1000 mA 81 %
TEN 5-1212 12 VDC 500 mA 84 %
TEN 5-1213 9 – 18 VDC 15 VDC 400 mA 84 %
TEN 5-1221 ± 5 VDC ± 500 mA 81 %
TEN 5-1222 ± 12 VDC ± 250 mA 84 %
TEN 5-1223 ± 15 VDC ± 200 mA 84 %

TEN 5-2410 3.3VDC 1200 mA 79 %
TEN 5-2411 5 VDC 1000 mA 83 %
TEN 5-2412 12 VDC 500 mA 86 %
TEN 5-2413 18 – 36 VDC 15 VDC 400 mA 86 %
TEN 5-2421 ± 5 VDC ± 500 mA 83 %
TEN 5-2422 ± 12 VDC ± 250 mA 86 %
TEN 5-2423 ± 15 VDC ± 200 mA 86 %

TEN 5-4810 3.3VDC 1200 mA 79 %
TEN 5-4811 5 VDC 1000 mA 83 %
TEN 5-4812 12 VDC 500 mA 86 %
TEN 5-4813 36 – 75 VDC 15 VDC 400 mA 86 %
TEN 5-4821 ± 5 VDC ± 500 mA 83 %
TEN 5-4822 ± 12 VDC ± 250 mA 86 %
TEN 5-4823 ± 15 VDC ± 200 mA 86 %

www.tracopower.com Page 1

DC/DC Conver ter

TEN 5 Series 6 Watt

Input Specifications

Input current no load /full load 12 Vin models 20 mA / 590 mA typ.

24 Vin models 5 mA / 290 mA typ.
48 Vin models 3 mA / 145 mA typ.

Start-up voltage / 12 Vin models 8.5 VDC / 8 VDC
under voltage shut down 24 Vin models 16.5 VDC / 16 VDC

48 Vin models 32.5 VDC / 32 VDC

Surge voltage (1 sec. max.) 12 Vin models 25 V max.

24 Vin models 50 V max.
48 Vin models 100 V max.

Reverse voltage protection 1.0 A max.
Conducted noise (input) EN 55022 level A, FCC part 15, level A

Output Specifications

V oltage set accuracy ± 1 %
Regulation – Input variation Vin min. to Vin max. ± 0.3 % max.

– Load variation 10 – 100 %
– single output models ± 1 % max.
– dual output models balanced load ± 1 % max.
– dual output models unbalanced load ± 3 % max.

Ripple and noise (20 MHz Bandwidth) 50 mVpk-pk max.
Temperature coefficient ± 0.02 % / °C
Output current limitation >110 % of Iout max., constant current

Short circuit protection hiccup mode, indefinite (automatic recovery)

Capacitive load – single output models 6800 µF max.

– dual output models 1000 µF max.

General Specifications

T emperature ranges – Operating – 40 °C ... + 75 °C (no derating)

– Case temperature + 95 °C max.
– Storage – 40 °C ... + 125 °C

Humidity (non condensing) 95 % rel H max.
Reliability, calculated MTBF (MIL-HDBK-217 E) >1 Mio. h @ + 25 °C
Isolation voltage Input/Output 1’500 VDC
Isolation capacity Input/Output 380 pF typ
Isolation resistance Input/Output (500 VDC) > 1‘000 M Ohm
Switching frequency 300 kHz typ. (Pulse frequency modulation PFM)

Safety standards UL 1950 , IEC 60950, EN 60950

Compliance up to 60 VDC input voltage
(SELV limit)

Safety approval UL /cUL File E188913
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

www.tracopower.com Page 2