TRACO TEN 5-0521 Datasheet

Features

C B

Scheme

◆ Wide 2:1 input range

◆ Full SMD-design

◆ High efficiency up to 86%

◆ Extended operating temperature

range –40°C to 85°C

◆ I/O isolation 1’500 VDC

◆ Indefinite short circuit protection

◆ Input filter to meet EN 55022, Class A

and FCC, level A without external
components

◆ Shielded metal case with insulated

baseplate

◆ 24-pin DIP with industry standard pinout

◆ High reliability, MTBF >1 Mio. h

◆ 3-year product warranty

DC/DC Converters

TEN 5 Series, 6 Watt

UL 60950-1

The TEN 5 Series is a range of DC/DC-converter modules with wide input range
of 2:1. State of the art SMD-technology guarantees a product with very high
reliability and good cost /performance ratio. High efficiency allows an operating
temperature range of –40°C to +85°C. I/O-isolation of 1’500 VDC together with
conducted noise compliance to EN 55022-A and FCC, level A makes these con­verters ideal for a wide range of applications in communications, mobile battery
powered equipments and industrial systems.

Models

Ordercode Input voltage range Output voltage Output current max. Efficiency typ.
TEN 5-0510
TEN 5-0511
TEN 5-0512
TEN 5-0513
TEN 5-0521
TEN 5-0522
TEN 5-0523
TEN 5-1210

TEN 5-1211
TEN 5-1212

TEN 5-1213
TEN 5-1221
TEN 5-1222
TEN 5-1223
TEN 5-2410
TEN 5-2411
TEN 5-2412
TEN 5-2413
TEN 5-2421
TEN 5-2422
TEN 5-2423
TEN 5-4810
TEN 5-4811
TEN 5-4812
TEN 5-4813
TEN 5-4821
TEN 5-4822
TEN 5-4823

4.5 – 7 VDC

(5 VDC nominal)

9 – 18 VDC

(12 VDC nominal)

18 – 36 VDC

(24 VDC nominal)

36 – 75 VDC

(48 VDC nominal)

3.3 VDC 1200 mA 75 %
5 VDC 1000 mA 79 %
12 VDC 500 mA 82 %
15 VDC 400 mA 82 %
±5 VDC ±500 mA 79 %
±12 VDC ±250 mA 82 %
±15 VDC ±200 mA 82 %

3.3 VDC 1200 mA 77 %
5 VDC 1000 mA 81 %
12 VDC 500 mA 84 %

15 VDC 400 mA 84 %
±5 VDC ±500 mA 81 %
±12 VDC ±250 mA 84 %
±15 VDC ±200 mA 84 %

3.3 VDC 1200 mA 79 %
5 VDC 1000 mA 83 %
12 VDC 500 mA 86 %
15 VDC 400 mA 86 %
±5 VDC ±500 mA 83 %
±12 VDC ±250 mA 86 %
±15 VDC ±200 mA 86 %

3.3 VDC 1200 mA 79 %
5 VDC 1000 mA 83 %
12 VDC 500 mA 86 %
15 VDC 400 mA 86 %
±5 VDC ±500 mA 83 %
±12 VDC ±250 mA 86 %
±15 VDC ±200 mA 86 %

http://www.tracopower.com Page 1 of 3

DC/DC Converters

TEN 5 Series 6 Watt

Input Specifications

Input current no load / full load 5 Vin models: 50 mA / 1460 mA typ.
12 Vin models: 20 mA / 590 mA typ.
24 Vin models: 5 mA / 290 mA typ.
48 Vin models: 3 mA / 145 mA typ.

Start-up voltage / 5 Vin models: 4.4 VDC / 4.0 VDC
under voltage shut down 12 Vin models: 8.0 VDC / 8.0 VDC
24 Vin models: 16.0 VDC / 16.0 VDC
48 Vin models: 32.0 VDC / 32.0 VDC

Surge voltage (1 sec. max.) 5 Vin models: 10 V max.
12 Vin models: 25 V max.
24 Vin models: 50 V max.
48 Vin models: 100 V max.

Reverse voltage protection 1.0 A max.
Conducted noise (input) EN 55022 level A, FCC part 15, level A

Output Specifications

Voltage set accuracy 1.0 %
Regulation – Input variation Vin min. to Vin max. 0.3 % max.

– Load variation 20 – 100 %
single output models: 1.0 % max.
dual output models balanced load: 2.0 % max.
dual output models unbalanced load: 5.0 % max.

Ripple and noise (20 MHz Bandwidth) 50 mVpk-pk max.
Temperature coefficient ±0.02 %/K
Output current limitation >120 % of Iout max., constant current
Short-circuit protection indefinite (automatic recovery)
Capacitive load single output models: 6800 µF max.

dual output models: 1000 µF max. (each output)

General Specifications

Temperature ranges – Operating –40°C to +85°C
– Case temperature +100°C max.
– Storage –55°C to +125°C

Derating 3.5 %/K above 70°C
Humidity (non condensing) 95 % rel H max.
Reliability, calculated MTBF (MIL-HDBK-217F, @ +25°C, ground benign) >1 Mio. h
Isolation voltage (60 sec) – Input/Output 1’500 VDC
Isolation capacity – Input/Output 380 pF typ.
Isolation resistance – Input/Output >1‘000 M Ohm (500 VDC)
Switching frequency 300 kHz typ. (Pulse frequency modulation PFM)
Safety standards UL 60950-1, IEC/EN 60950-1
Safety approval CSA File No. 226037

http://directories.csa-international.org

All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

http://www.tracopower.com Page 2 of 3

J

enatschstrasse 1 · CH-8002 Zurich · Switzerland

Tel. [phone] · Fax [phone] · [e-mail] · www.tracopower.com

DC/DC Converters

0.5

4.54

±0.5

22.86

(0.9)

20

±0.5 (0.8 ±0.02)

2.54

(0.1)

32

±0.5 (1.25 ±0.02)

10

±0.5

15.24

(0.6)

9

11

22

23

2
3

16

14

Bottom view

15.24

(0.6)

5.08

2.4

±0.5

5

Insulated Baseplate

(0.1 ±0.02)

(0.4

±0.02)

(0.2)

(0.18 ±0.02)

(0.2)

(0.02)

TEN 5 Series 6 Watt

Physical Specifications

Casing material steel, nickel plated
Baseplate material non conductive FR4
Potting material epoxy (UL 94V-0 rated)
Weight 16.9 g (0.59 oz)
Soldering temperature max. 265°C / 10 sec.

Outline Dimensions mm (inches)

Pin diameter ø 0.5 ±0.05 (0.02 ±0.002)
Tolerances ±0.5 (±0.02)

Pin-Out

Pin Single Dual

–Vin (GND) –Vin (GND)

2

–Vin (GND) –Vin (GND)

3

9
11
14
16
22
23

No pin Common

No con. –Vout

+Vout +Vout

–Vout Common
+Vin (Vcc) +Vin (Vcc)
+Vin (Vcc) +Vin (Vcc)

Specifications can be changed any time without notice

Rev. 12/09

Page 3 of 3