TRACO TEN10-2413, TEN10-2412, TEN10-2411, TEN10-2410, TEN10-1223 Datasheet

Features

Wide 2 : 1 Input Range
High Power Density
Operating T emp. Range

– 40°C to +75°C
Indefinite Short-Circuit Protection
I/O-Isolation 1500 VDC
Input Filter meets EN 55022, Class A

and FCC, Level A without external
Components

Industry Standard Pinout
Shielded Metal Case with

insulated Baseplate
High Reliability , MTBF >1 Mio. h
2 Year Product Warranty

DC/DC Conver ter

TEN 10 Series 10 Watt

The TEN 10 series of DC/DC converters , comprising 24 different models,
has been designed for a wide range of applications including
communications, industrial systems and battery powered equipments. Full
SMD-design with use of ceramic chip capacitors guarantees a high reliabil­ity and a long lifetime. Other features of this converters are internal filter to

meet EN 55022, class A and FCC, level A and a high efficiency.

Models

Ordercode Input voltage range Output voltage O utput curren t max. Efficiency typ.

TEN 10-1210 3,3 VD C 2’400 mA 72 %
TEN 10-1211 5 VDC 2‘000 mA 77 %
TEN 10-1212 12 VDC 830 mA 80 %
TEN 10-1213
TEN 10-1215 24 VDC 415 mA 81 %
TEN 10-1221 ± 5 VDC ± 1‘000 m A 78 %
TEN 10-1222 ± 12 VDC ± 415 m A 81 %
TEN 10-1223 ± 15 VDC ± 330 m A 80 %

TEN 10-2410 3,3 VDC 2‘400 mA 76 %
TEN 10-2411 5 VDC 2‘000 mA 78 %
TEN 10-2412 12 VDC 830 mA 82 %
TEN 10-2413
TEN 10-2415 24 VDC 415 mA 83 %
TEN 10-2421 ± 5 VDC ± 1‘000 m A 80 %
TEN 10-2422 ± 12 VDC ± 415 m A 82 %
TEN 10-2423 ± 15 VDC ± 330 m A 82 %

TEN 10-4810 3,3 VDC 2‘400 mA 76 %
TEN 10-4811 5 VDC 2‘000 mA 80 %
TEN 10-4812 12 VDC 830 mA 82 %
TEN 10-4813
TEN 10-4815 24 VDC 415 mA 83 %
TEN 10-4821 ± 5 VDC ± 1‘000 m A 81 %
TEN 10-4822 ± 12 VDC ± 415 m A 83 %
TEN 10-4823 ± 15 VDC ± 330 m A 83 %

9 – 18 VDC

18 – 36 VDC

36 – 75 VDC

15 VDC 670 mA 80 %

15 VDC 670 mA 82 %

15 VDC 670 mA 83 %

www.tracopower.com Page 1

DC/DC Conver ter

TEN 10 Series 10 Watt

Input Specifications

Input current (no load) 12 Vin models 30 mA typ.

24 Vin models 20 mA typ.
48 Vin models 10 mA typ.

Input current (full load) 12 V in ; 3.3 Vout models: 915 mA typ.

12 Vin; 5 & ±5 Vout models: 1080 mA typ.
12 Vin; other output models: 1045 mA typ.
24 Vin; 3.3 Vout models: 435 mA typ.
24 Vin; 5 & ±5 Vout models: 530 mA typ.
24 Vin; other output models: 510 mA typ.
48 Vin; 3.3 Vout models: 215 mA typ.
48 Vin; 5 & ±5 Vout models: 260 mA typ.
48 Vin; other output models: 250 mA typ.

Start-up voltage / 12 Vin models 8.5 VDC / 8 VDC

under voltage shut down 24 Vin models 16.5 VDC / 16 VDC

48 Vin models 32.5 VDC / 32 VDC

Surge voltage 12 Vin models 25 V max.

(1 sec. max.) 24 Vin models 50 V max..

48 Vin models 100 V max.

Reverse voltage protection 1.0 A max.
Conducted noise (input) EN 55022 level A, FCC part 15, level A

Output Specifications

V oltage set accuracy ± 1 %
Regulation – Input variation Vin min. to V in max. ± 0.3 % max.

– Load variation 10 – 90 %
– single output models ± 0.5 % max.
– dual output models balanced load ± 1 % max.
– dual output models unbalanced load ± 3 % max.

Ripple and noise (20 MHz Bandwidth) 50 mVpk-pk max.
Temperature coefficient ± 0.02 % / °C
Output current limitation >110% of Iout max., constant current
Short circuit protection Hiccup mode, indefinite (automatic recovery)
Capacitive load – single output models 2200 µF max.

– dual output models 470 µF max.

General Specifications

T emperature ranges – Operating – 40 °C ... + 75 °C (no derating)

– Case temperature + 95 °C max.
– Storage – 40 °C ... + 125 °C

Humidity (non condensing) 95 % rel H max.
Reliability, calculated MTBF (MIL-HDBK-217 E) >1 Mio. h @ + 25 °C
Isolation voltage Input/Output 1‘500 VDC
Isolation capacity Input/Output 120 pF typ
Isolation resistance Input/Output (500 VDC) > 1‘000 M Ohm

All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

www.tracopower.com Page 2