TRACO PHV12-0.5K1000N, PHV12-0.5K1000P, PHV12-1.0K5000N, PHV12-1.0K5000P, PHV12-2.0K2500N Datasheet

www.tracopower.com Page 1

Features

HV -Power Supplies

PHV Series 3.5 - 5 Watt

Models

World’s most compact High Voltage

Power Supplies

Full SMD-Design with Ceramic

Capacitors for highest Reliability
Positive or negative Polarity Models
Excellent Output Stability
Low Temperature Coefficient
Ultra low Ripple
Remote Voltage Programming

0 to 100%
Short Circuit Protection
Shielded Metal Case
2 Year Product Warranty

The PHV series are regulated miniature high voltage power modules
using SMD and hybrid technology. They are designed for PCB
mounting. The use of high stability components guarantees a minimal
temperature drift and a very stable output voltage.
Typical applications for these HV power supplies are photomultiplier
tubes, gas chromatography , analytical instruments and wherever where

small size and high output voltage stability is requested.

Ordercode Input voltage Output volta ge Output c urre nt max.

PHV 12-350 S 10 P 0... +350 VDC 10 mA
PHV 12-350 S 10 N 0... –350 VDC 10 mA
PHV 12-0.5 K 1000 P 0... +500 VDC 10 mA
PHV 12-0.5 K 1000 N 12 VDC 0... –500 VDC 10 mA
PHV 12-1.0 K 5000 P 10.8 - 16.5 VDC 0...+1000 VDC 5 mA
PHV 12-1.0 K 5000 N 0... –1000 VDC 5 mA
PHV 12-2.0 K 2500 P 0...+2000 VDC 2.5 mA
PHV 12-2.0 K 2500 N 0... –2000 VDC 2.5 mA

Order code P for positive output polarity
Order code N for negative output polarity

www.tracopower.com Page 2

All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

Input Specifications

Input voltage +10.8VDC to +16.5 VDC
Reverse voltage protection none
Conducted noise (input) internal filter

Output Specifications

Voltage accuracy ± 5 %
V oltage adjustement range 0 – 100%

(adjustable with external voltage 0 to +6 VDC or with 5 kOhm varaiable resistor)

Remote ON /OFF control ON = pin 2 to pin 5 open

OFF = pin 2 to pin 5 short

Regulation – Input variation Vin min. to Vin max. ± 0.01 % max.

– Load variation 0 – 100 % ± 0.01 % max.
Ripple and noise (20 MHz Bandwidth) 100 mVpk-pk max.
Temperature coefficient ± 0.01 % / °C

Stability 0.05% 8h after warm-up time
Current limitation >110% of Iout max., constant current

Short circuit protection indefinite

General Specifications

T emperature ranges – Operating – 10 °C ... + 50 °C

– Case temperature + 90 °C max.

– Storage – 25 °C ... + 75 °C

Derating above 40°C 4 % /°C
Humidity (non condensing) 30 – 95 % rel H max.

Efficiency 60 – 65%

Reliability, calculated MTBF (MIL-HDBK-217 E) >300’000 h @ + 25 °C
Isolation voltage Input/Output none

Vibration 5 –10 Hz amplitude 10 mm pk-pk

10 – 55 Hz acceleration 2 G

Shock acceletration 20 G max. time 11 ms

Physical Specifications

Case material steel chrom-nickel plated
Weight 65 g (2.29 oz)
Soldering temperature max. 260 °C / 10 sec.

HV-Power Supplies

PHV Series 3.5 - 5 Watt