Trackimo TRKM002 User Manual

GPS Tracker

Huizhou Light of Science Technology Co., Ltd.

The USB port is used for charging or upload software.

Ensure that your tracker has a working SIM installed.

TRKM002

User Manual

A simple App interface

Trackimo’s web and smartphone-based App provides a single point of contact for activation, settings, and simultaneous
tracking of multiple devices. Users may view multiple trackers on a single map. Other App features include custom notifications
based on motion, battery status, impact or acceleration, and the crossing of user-defined “geo-fences”, which can be drawn
directly on the map. Device settings, including tracking frequency and power status, are accessible remotely via the Trackimo App.

Return the location of the tracker

To know location of your Tracker, send an SMS to Tracker

and it will report its location by SMS.

Tracking on Map

Download trackimo APP from trackimo.com.
Input the latitude and longitude that you receive from the tracker by SMS and click the search button.

The APP will display the location for you.

SOS Function

When you meet an emergency, you can press the SOS button and used MIC for help.
The loudspeaker(Buzzer) is used for alarm when battery power is lower.

Start the APP,

For more details you can visit trackimo.com.

The activation process requires the Device ID and Device Key, which are
found on the back of your Trackimo Device.

This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modi?cations to this device not explicitly approved by
manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.

Remark: This device is designed to compliant with EN 50360: 2001/A1: 2012&EN 62209-1: 2006&EN 62209-2: 2010 and FCC OET 65.

Extreme Temp.:

Please use a AC charger(Input: AC100~240V, 50/60Hz 0.15A; Output: DC 5V/500mA).
The AC charger shall be installed near the equipment and shall be easily accessible.
The plug considered asdisconnected device of charger.

-25~+45degrees Celsius