Tracer TP-9000 User Manual

TM

GLO-AWAY

No. TP-9000

GLO-AWAYTM is a fast and easy way to

remove fluorescent leak detection dyes from all surface

areas. It can be used to remove all manufacturers’ dyes

and also a general-purpose cleaner.

TM

GLO-AWAY

TP-9000

Fluorescent Dye Cleaner/Remover

DIRECTIONS:

1.) Spray GLO-AWAY™ on all parts where dye is detected.

2.) Wipe all sprayed areas.

3.) Spray liberally with water to remove both the GLO-AWAY™ and the dye.

4.) Check all areas again with an ultraviolet or UV/blue lamp to be sure that all of the
dye has been removed.

• Prevent freezing. If frozen, allow to thaw, shake well and use. Product may be
thawed by submerging in warm water.

• Keep out of reach of children.

• FOR PROFESSIONAL SERVICES ONLY.

EYES: Flush eyes thoroughly with water for 15 minutes. Seek medical attention if
irritation persists.

SKIN: Flush thoroughly with soap and water. Dry and apply skin lotion.
INGESTION: If swallowed, drink warm water to dilute stomach contents. Induce

vomiting. Call physician immediately.

INHALATION: Not known to cause irritation.

For product information and technical assistance, call us at 1-800-641-1133. Outside the U.S. and
Canada, call 516-333-1254. CHEMTREC Emergency Telephone No. (24 hours): 1-800-424-8300. Call
collect outside continental U.S.: 703-527-3887. Consult Material Safety Data Sheet (MSDS) on our
website at www.tracerline.com.

TRACER PRODUCTS

A Division of Spectronics Corporation

956 Brush Hollow Road, P.O. Box 483
Westbury, New York 11590
800-641-1133 · 516-333-1254

Fax: [phone] · 516-876-8411

www.tracerline.com

PLEASE NOTE

FIRST AID

6/05 AM05020
PRINTED IN U.S.A.