
TRACEABLE
HUMIDITY/
TEMPERATURE
METER WITH
DUAL MIN/MAX
MEMORIES
INSTRUCTIONS
®
Traceable® Products is ISO 9001:2015 Quality-
Certied by DNV and ISO/IEC 17025:2005
accredited as a Calibration Laboratory by A2LA.
Traceable
©2019 Traceable® Products. 92-4096-00 Rev. 7 110419
Find Quality Products Online at: sales@GlobalTestSupply.com
®
is a registered trademark of Cole-Parmer.
www.GlobalTestSupply.com

SPECIFICATIONS
Display: ¾”-High LCD
Accuracy: ±1°C (0 to 40°C) otherwise ±2°C
±3%RH (25 to 75)%RH, ±5%RH otherwise
Resolution: 1°F or °C 1%RH
Temperature Range: 32 to 122°F (0 to 50°C)
Humidity Range: 25 to 95%RH
Memory: Stores and recalls minimum/ maximum
temperature and humidity readings.
Display up-dated every second
Functions: Temperature and relative humidity
Attachments: Wall mount, bench stand
Size: 3¾” x 2½” x ½”
Weight: 3 oz.
Figure 1:
Description
1. Display
2. MAX-HYGRO
3. MIN-HYGRO
4. Memory/Clear
5. MAX-THERMO
6. MIN-THERMO
Change Temperature Reading to Fahrenheit
(F°) or Celsius (C°)
1. Open BATTERY COMPARTMENT DOOR.
2. Locate switch in upper right corner of battery compartment.
3. Slide switch to left for Celsius (C°). Slide switch to right for
Fahrenheit (F°).
4. Replace BATTERY COMPARTMENT DOOR.
Thermometer Operation
1. Press the THERMO-MIN button once to recall the minimum
temperature stored in the memory. “MIN” will appear on the
display.
2. Press the THERMO-MIN button once again to display the current temperature. “MIN” will no longer appear on the display.
3. Press the THERMO-MAX button once to recall the maximum
temperature stored in the memory. “MAX” will appear on the
display.
4. Press the THERMO-MAX button once again to display the current temperature. “MAX” will no longer appear on the display.
Reset the Thermometer Memory
1. Press the THERMO-MIN button once to recall the minimum
temperature stored in the memory. “MIN” will appear on the
display.
2. Press the MEMORY/CLEAR button once to reset the minimum
temperature to the current temperature.
3. Press the THERMO-MIN button once again to display the current temperature. “MIN” will no longer appear on the display.
4. Press the THERMO-MAX button once to recall the maximum
temperature stored in the memory. “MAX” will appear on the
display.
Find Quality Products Online at: sales@GlobalTestSupply.com
www.GlobalTestSupply.com

5. Press the MEMORY/CLEAR button once to reset the maximum
temperature to the current temperature.
6. Press the THERMO-MAX button once again to display the current temperature. “MAX” will no longer appear on the display.
Hygrometer Operation
1. Press the HYGRO-MIN button once to recall minimum relative
humidity stored in the memory. “MIN” will appear on the display.
2. Press the HYGRO-MIN button once again to return to the current relative humidity. “MIN” will no longer appear on the display.
3. Press the HYGRO-MAX button once to recall the maximum
relative humidity stored in the memory. “MAX” will appear on
the display.
4. Press the HYGRO-MAX button once again to return to current
relative humidity. “MAX” will no longer appear on the display.
Reset the Hygrometer Memory
1. Press the HYGRO-MIN button once to recall the minimum
relative humidity stored in the memory. “MIN” will appear on
the display.
2. Press the MEMORY/CLEAR button once to reset the minimum
relative humidity to the current relative humidity.
3. Press the HYGRO-MIN button once again to display the current
relative humidity. “MIN” will no longer appear on the display.
4. Press the HYGRO-MAX button once to recall maximum relative
humidity stored in the memory. “MAX” will appear on the display.
5. Press the MEMORY/CLEAR button once to reset the maximum
relative humidity to the current relative humidity.
6. Press the HYGO-MAX button once again to display the current
relative humidity. “MAX” will no longer appear on the display.
DISPLAY MESSAGES
1. HH – Two Hs ashing indicate the relative humidity being
measured is above the range of the unit.
2. LL – Two Ls ashing indicate the relative humidity being mea-
sured is below the range of the unit.
3. - - – Two dashes indicate the temperature, although still
displayed, is out of the range of the unit.
BENCH STAND
1. Bench stand is part of the BATTERY COMPARTMENT DOOR.
2. Locate the small rectangular opening at the bottom of the BATTERY COMPARTMENT DOOR.
3. Insert paper clip into opening and gently turn ⅛” in either direc-
tion. Stand will ip open.
4. To close, snap the stand closed.
Find Quality Products Online at: sales@GlobalTestSupply.com
www.GlobalTestSupply.com

ALL OPERATIONAL DIFFICULTIES
If this unit does not function properly for any reason, please replace
the batteries with two new AAA alkaline batteries. (See “Battery
Replacement” below.) Low battery power can occasionally cause
any number of “apparent” operational difculties. Replacing the
batteries with fresh ones will solve most difculties. Equivalent
battery replacements are any AAA alkaline batteries. Replacement
battery Cat. No. 1105.
BATTERY REPLACEMENT
1. To open battery compartment, slide BATTERY COMPARTMENT
DOOR on the back of unit in direction of arrow.
2. Remove depleted batteries. Insert two fresh AAA alkaline batteries in appropriate positions to agree with the polarity symbols (+
and -) in the battery compartment.
3. Replace BATTERY COMPARTMENT DOOR.
Find Quality Products Online at: sales@GlobalTestSupply.com
www.GlobalTestSupply.com