Traceable 3140 User manual

CAUTION-USE OF CONTROLS
OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED
HEREIN MAY RESULT IN
HAZARDOUS RADIATION
EXPOSURE.

WARRANTY, SERVICE, OR
RECALIBRATION

For warranty, service, or recalibration, contact:

TRACEABLE® PRODUCTS

12554 Old Galveston Rd. Suite B230

Webster, Texas 77598 USA

Ph. 281 482-1714 • Fax [phone]

E-mail [e-mail] • www.traceable.com

Traceable® Products is ISO 9001:2015 Quality-

Certied by DNV and ISO/IEC 17025:2005

accredited as a Calibration Laboratory by A2LA.

LASER POINTER

INSTRUCTIONS

©2018 Traceable® Products.

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

92-3140-00 Rev. 1 060718

PLEASE NOTE LASER RADIATION
IS HARMFUL TO THE EYE, DO
NOT LOOK DIRECTLY INTO THE
APERTURE WHILE THE LASER IS
IN OPERATION

2. To change the batteries screw off
the cap. Install the batteries with
the positive pole of the battery up.
Replace the cap.

4. Remember that Laser pointer is a
laser device and can be harmful if
used improperly.
Please KEEP OUT OF THE
REACH OF CHILDREN.

USER INSTRUCTIONS

1. Your Laser Pointer uses two AAAA

1.5 volt batteries. We recommend
alkaline batteries for longest life.

3. To operate the pointer simply press
on the plastic button. Releasing the
button will turn the pointer off.

5. If the body of the laser pointer
becomes dull or tarnished you may
clean the surface by using a clean
cloth and alcohol.

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com