TQC Sheen AB3650, AB3655 Operating Instructions Manual

Automatic Film
Applicator Compact

AB3650, AB3655

Entry level film applicator

Operating Instructions

(V1.3 0718)

IMPORTANT! Before taking this instrument
in use we strongly advise you to read this
manual carefully.

WARRANTY

TQC Sheen will grant a warranty for a period of 12 months for the Automatic
Film Applicator Compact and 12 months for all related equipment from
the date of delivery in respect of any evidence of faulty workmanship and
materials.

Should a delivered consignment prove to be contrary to contract upon
inspection, the customer shall grant TQC Sheen the opportunity hereunder
of removing the fault, or else the customer may demand replacement.
Because of size and weight of the instrument TQC Sheen will strive to give
remote support.
Should the supply or delivery of any improvement or replacement not prove
possible, the customer may choose between having the purchase price
reduced or in demanding the contract of sale to be rescinded (conversion).
Damage resulting from natural wear and tear, mechanical or chemical
damage, an act of God or non compliance with the operating instructions
shall be excluded from the warranty as well as mechanical interference by
the customer or by third parties with Automatic Film Applicator Compact
and related equipment without TQC Sheen’s written permission. No liability
will be accepted for defects, damage or injury caused due to use not carried
out in accordance with the manufacturer’s user instructions.

To claim warranty, the rejected product has to be sent to TQC Sheen
together with the original invoice, any exchange before the product has
been returned to TQC Sheen is not possible. TQC Sheen reserve the right to
repair, exchange or supply an equivalent substitute. TQC Sheen is not liable
for handling or transport costs. Warranty on the purchase price is limited, all
liability for consequential damages or changes in technology is expelled.

This product complies to

- Machinery Directive 2006/42 / EC

- Low Voltage Directive 2006/95 / EC

- EMC Directive 2004/108 / EC

This product is RoHS 2 compliant (2011/65/EU)

3 |

INDEX

1 General

1.1 Importance of operating manual

1.2 User-responsibility

1.3 Responsibility of personnel

1.4 Dangers

1.5 Designated purpose

1.6 Copyright

1.7 Manufacturer’s/Supplier’s address

2 Safety Instructions

2.1 Meaning of Symbols

2.2 Availability of Safety Information

2.3 Dangers from Electrical Energy

2.4 Modifications to the Equipment

3 Transport and Storage

3.1 Packing

3.2 User: Check on Receipt

3.3 Reporting Transport Damage and
Documentation

3.4 Storage and Protective
Measures when not in use

4 Instrument Data

4.1 Name / Article

4.2 Scope of Supply

4.3 Technical Data

4.4 Dimensions and Weight

4.5 Basic Unit

4.6 Accessories and Spares

6

7

8

9/10

5 Instrument Controls and Functions

6 Instrument Preperations

7 Operation

7.1 Navigation

7.2 Starting the machine

7.3 Setting test duration

7.4 Prepare a draw down - Glass bed model (AB3650)

7.5 Prepare a draw down - Vacuum bed model (AB3655)

7.6 Placing an application tool

7.7 Using paper to collect the surplus of paint

7.8 Replacing the drip pan

8 Care and Maintenance

8.1 Disposal of Materials

8.2 Customer Service

9 Disclaimer

11

12

13/17

18

19

5 |

1 GENERAL

1.1 Importance of operating manual

This manual is written in order to become familiar with all the functions and
possible applications of the instrument. It contains important instructions
about how to use the instrument safely and economically; according to
the purpose designated. Following these instructions is not only essential
to avoid risks. It also reduces repair costs and down-time and increases the
products reliability and service-life.

Anyone who works with the instrument shall follow the instructions in this
manual, particularly the safety related instructions. Additionally local rules
and regulations relating to environmental safety and accident prevention
should be observed. It is mandatory that users have read and understand
this manual prior to first operation of the Automatic Film Applicator
Compact.

1.2 User-responsibility

The user should

a) Only allow persons to work with the instrument who are
familiar with the general instructions on how to work safely and
to prevent accidents. The use of the instrument should have been
instructed duly. The safety chapter and the warnings in this
manual should have been read and understood; acknowledged
as evidenced by their signature.

b) Regularly check the safety-awareness of personnel at work.

1.5 Designated purpose

The Automatic Film Applicator Compact is exclusively designed to apply
thin films of liquid or pastes on test specimen. Other applications constitute
improper use. TQC Sheen will not be held liable for damage resulting from
improper use.

Designated purpose also includes properly observing all instructions in the
operation manual, and adherence to inspection and maintenance
schedules. TQC Sheen is entitled to request these form when warranty
claims are made and during inspections to ensure safe operation and
evaluate correct usage.

1.6 Copyright

The copyright of this operating manual remains with TQC Sheen. This
operating manual is intended solely for the user and his personnel. Its
instructions and guidelines may not be duplicated, circulated or otherwise
passed on to others, neither fully, nor partly. Infringement of these
restrictions may lead to legal action may be taken if this restrictions are
infringed upon.

1.7 Manufacturer’s/Supplier’s address

TQC Sheen
Molenbaan 19
2908 LL Capelle aan den IJssel
The Netherlands
T [phone]
F [phone]

1.3 Responsibility of personnel

Before commencing work anyone appointed to work with the instrument
should pay attention to the general regulations relating to working safety
and accident prevention. The safety chapter and the warnings in this manual
should have been read and understood; acknowledged as evidenced by
their signature.

1.4 Dangers

This instrument has been designed and constructed in accordance with
state-of-the-art technology and the acknowledged safety regulations.
Nevertheless, working with the instrument may cause danger to the life and
health of the operator or to others, or damage to the instrument or other
property. Therefore the instrument should only be used for its designated
purpose, and in a perfect technical condition. Any defect that could have a
negative effect on safety should be repaired and recorded.

| 6