155922_V00_QSG_TPP_Pipettor 1/4
Quick Start Guide TPP Pipettor Turbo-Fix
This quick guide is intended to provide a brief overview of the main features and
operation of TPP Pipettor Turbo-Fix. For detailed information, please refer to the
Operating Instructions of TPP Pipettor Turbo-Fix that can be found at www.tpp.ch
in
several languages
.
Battery Charge
Charge the battery completely before first use.
The supply voltage must meet the requirements of the mains
adapter: 100-240 VAC, 50/60 Hz.
Plug in
Low Battery
Charging Battery
Charged Battery
~ 3.5 h
Red Blink
Red
Green
General Speed Setting
Plug in for Turbo
Speed
50 %
Speed
100 %
Speed
125 %
Turbo Speed
155922_V00_QSG_TPP_Pipettor 2/4
Manual Speed Control
A
S
P
I
R
A
T
E
Slow
Fast
Gravity Dispense
Slow
Fast
D
I
S
P
E
N
S
E
Pump not running Pump running Pump running
Filter Exchange
Press (1) and turn 1/8
th
counter clockwise (2)
Replace the filter
Colored side facing upwards
155922_V00_QSG_TPP_Pipettor 3/4
GENERAL INFORMATION TPP Pipettor Turbo-Fix
Intended Use
TPP Pipettor Turbo-Fix is a pipette controller designed for aspirating and dispensing aqueous
solutions with plastic or glass pipettes in a volume range of 1 to 100 ml. It is intended for
measurement, control and laboratory use.
Safety Notes
1) Do not use or charge TPP Pipettor Turbo-Fix in an atmosphere with danger of explosion.
Do not pipette highly flammable liquids such as acetone or ether.
2) Comply with the material safety data sheet (MSDS) and with all safety guidelines when
handling dangerous substances. Use protective clothing and safety goggles. Never point a
pipette in anyone’s direction.
3) Avoid pipetting of liquids whose vapours could attack the materials PA (polyamide), POM
(polyoxymethylene), FPM (fluor-rubber), NBR (nitrile-rubber), CR (chloroprene) and silicone.
Corrosive vapours could also damage metallic parts inside the device.
4) Use an original TPP mains adapter only. Protect it from moisture otherwise TPP Pipettor
Turbo-Fix might be damaged.
Regardless of the listed safety notes, additionally applicable regulations and guidelines of trade
associations, health authorities, trade supervisory offices, etc. must be observed.
Warranty
TPP Pipettor Turbo-Fix is designed and manufactured following high standards in quality and
durability. They are warranted for a period of 12 months.
Equipment Disposal
TPP Pipettor Turbo-Fix device must not be disposed of with unsorted municipal waste.
Dispose of TPP Pipettor Turbo-Fix in accordance with the laws and regulations in your
area governing disposal of devices.
Supplier
TPP Techno Plastic Products AG
CH-8219 Trasadingen, Switzerland
T +41 52 687 01 87
F +41 52 687 01 77
info@tpp.ch
www.tpp.ch
155922_V00_QSG_TPP_Pipettor 4/4
Loading...