TP Link WA850REV6 User Manual

User Guide

300Mbps Wi-Fi Range Extender TL-WA850RE

REV6.0.0 1910012331

Contents

About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Chapter 1. Get to Know About Your Extender . . . . . . . . . . . . . . . . . . . . . . . . 2

1. 1. Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 1. 2. Appearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 1. 2. 1.LED Explanation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 1. 2. 2.Port and Button Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Chapter 2. Set Up Internet Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

2. 1. Quick Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 2. 1. 1.Method 1: Via the WPS Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 2. 1. 2.Method 2: Via a Web Browser. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 2. 1. 3.Method 3: Via the TP-Link Tether App . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

2. 2. Position Your Extender . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Chapter 3. Customize Your Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

3. 1. Check Internet Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 3. 2. Configure Wireless Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 3. 3. Change LAN Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 3. 4. Specify DHCP Server Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 3. 5. Adjust Wi-Fi Coverage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 3. 6. Set Access Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Chapter 4. More Features of Your Extender . . . . . . . . . . . . . . . . . . . . . . . . . 20

4. 1. Use Your Extender as a Wireless Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 4. 2. Transform Your Existing Wired Network to a Wireless One. . . . . . . . . . . . . . . . . . . 21 4. 2. 1.To Set Up the Extender as an Access Point . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 4. 2. 2.To Connect Your Wireless Devices to the Extender via WPS . . . . . . . . . . 22

Chapter 5. Manage Your Extender . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

5. 1. Set Up System Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 5. 2. Control LEDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 5. 3. Power Schedule. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 5. 4. Upgrade the Firmware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

5. 5. Backup and Restore Configuration Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

5. 6. Change Admin Account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

5. 7. System Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

FAQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

About This Guide

This guide is a complement to Quick Installation Guide. The Quick Installation Guide provides instructions for quick internet setup, while this guide contains details of each function and demonstrates how to configure them.

When using this guide, please notice that features of the extender may vary slightly depending on the model and software version you have, and on your location, language, and internet service provider. All screenshots, images, parameters and descriptions documented in this guide are used for demonstration only.

Conventions

In this guide the following conventions are used:

	Convention	Description
	Underlined	Underlined words or phrases are hyperlinks and You can click to redirect to a website or
		a specific section.
	Teal	Contents to be emphasized and texts on the web page are in teal, including the menus,
		items, buttons, and so on.

The menu structures to show the path to load the corresponding page. For example,

>Advanced > Wireless > MAC Filtering means the MAC Filtering function page is under the Wireless menu that is located in the Advanced tab.

	Note:		Ignoring this type of note might result in a malfunction or damage to the device.
		Tips:	Indicates important information that helps you make better use of your device.
symbols on the web			•	click to edit the corresponding entry.
page			•	click to delete the corresponding entry.

More Info

The latest software, management app and utility are available from the Download Center at www.tp-link.com/support.

The Quick Installation Guide can be found where you find this guide or inside the package of the range extender.

Specifications can be found on the product page at http://www.tp-link.com.

A Technical Support Forum is provided for you to discuss our products at http://forum.tp-link.com.

Our Technical Support contact information can be found at Contact Technical Support page at www.tp-link.com/support.

1

Chapter 1

Get to Know About Your Extender

This chapter introduces what the extender can do and its appearance. It contains the following sections:

•Product Overview

•Appearance

Chapter 1

GettoKnowAboutYourExtender

1. 1. Product Overview

Bring Dead Zones Back to Life

Tired of Wi-Fi “dead zones”? The TP-Link extender is connected to your router wirelessly, strengthening its signal and expanding its coverage into areas that could not otherwise be reached. The device also reduces signal interference to ensure reliable Wi-Fi coverage throughout your home or office.

Easy Installation & Quick Position

The extender works with any standard wireless router. Instantly connect the extender to a router by pressing the router’s WPS button (if available) followed by the extender’s WPS button. Alternatively, follow the Quick Setup instructions on the extender’s web management page.

Once the extender is connected to a router, you can relocate it to your preferred location with no furthure configuration required. The intelligent signal light can help to find the best location.

Easy Management with the Tether APP

Tether provides a simple, intuitive way to access and manage your extender with your smart devices.

1. 2. Appearance

3

Chapter 1

GettoKnowAboutYourExtender

1. 2. 1. LED Explanation

You can check the extender’s working status by following the LED Explanation table.

	Name						Status	Indication
							On/Off	The extender is connected or not connected to your router’s
		RE						wireless network.
							Blinking	WPS connection is in process.
	Wireless						On/Off	The extender’s wireless function is enabled or disabled.
	Power						On/Off	The extender is on or off.
							Blinking	The system is starting up or firmware is being upgraded.
							On	Indicates the Wi-Fi connection between the extender and the
	(Signal Strength)							router. More lit LEDs indicate a better signal strength.
	Ethernet						On/Off	The Ethernet port is connected or not connected to a powered-
								on device.

1. 2. 2.	Port and Button Description
Ports or Buttons		Description
		Press the WPS button on your host router, and immediately press the	button
(WPS Button)		on the extender for 1 second. The RE LED of the extender should change from
		blinking to solid on, indicating successful WPS connection.
RESET Button		With the extender powered on, use a pin to press the RESET button for 1
		second. The extender will reboot.
Ethernet Port		Connect your Ethernet-only device to the Ethernet port of the extender to join
		the network.

Note:

1.The provided plug may differ from the picture due to different regional power specifications.

2.Use the product in below directions.

Or

4

Chapter 2

Set Up Internet Connection

This chapter informs you how to boost your host wireless coverage. Please follow the step-by-step instructions to set up the internet connection.

It contains the following sections:

•Quick Setup

•Position Your Extender

Chapter 2

Set Up Internet Connection

2. 1. Quick Setup

Power on

Plug the extender into an electrical outlet next to your host router, and then wait until the Power LED changes to solid on.

Connect to the host network

There are three ways to connect to the host network: via the WPS button, via a web browser, or via the Tether app. Using the WPS button is an easier way to extend your host network. We recommend you to use this way if your router has a WPS button. The button might look like one of these: | WPS | .

2. 1. 1. Method 1: Via the WPS Button

1.Press the WPS button on your host router, and then press the button on the extender within 2 minutes.

Note:

For more information about using WPS button on your host router, please refer to the router’s user guide.

2.Wait until the RE LED changes from blinking to solid on, which indicates that the WPS connection is successful.

3.Enjoy! Connect to the extended network and enjoy internet. The extended network shares the same network name and password as your router.

Note:

•If the WPS method fails, or if you want to customize the extended network name, refer to Method 2: Via a Web Browser or Method 3: Via the TP-Link Tether App.

•Since the performance of the extended network will be affected by the distance between the extender and host router, we recommend that you relocate your extender by referring to Position Your Extender.

2. 1. 2. Method 2: Via a Web Browser

1.Connect your computer to the extender's wireless network.

•For Windows Users

6

Chapter 2 Set Up Internet Connection

1 ) Unplug the Ethernet cable from your computer (if any).

2 ) Click the Wi-Fi icon on the task bar and connect to the extender’s network: TP-Link_Extender.

Connections are available

Wireless Network Connection

TP-Link_Extender

√ Connect automatically MyHome

• For Mac OS X Users

1 ) Unplug the Ethernet cable from your computer (if any).

2 ) Click the Wi-Fi icon in the top right corner of the screen, and connect to the extender’s network: TP-Link_Extender.

Wi-Fi: On

Turn Wi-Fi O

TP-Link_Extender

MyHome

Join Other Network...

Create Network...

Open Network Preferences...

2.Follow the instructions of Quick Setup Wizard to connect the extender to your host router.

1) Launch a web browser, enter http://tplinkrepeater.net or http://192.168.0.254 in the address field, create a password for future logins, and click Start.

Note:

If the login window does not appear, please refer to FAQ.

7

Chapter 2 Set Up Internet Connection

2 ) Select your host router’s 2.4GHz SSID (network name), enter its password (NOT the password you just created for logins), and click Next.

3 ) Either keep the default SSID (network name) or customize it for the extended network, and then click Next.

4 ) Verify your wireless settings and click Save.

8

Chapter 2

Set Up Internet Connection

5 ) Enjoy! Connect to the extended network and enjoy internet. The extended network shares the same wireless password as that of your host network, but may have different network name if you have customized the SSID during the configuration.

Note:

Since the performance of the extended network will be affected by the distance between extender and host router, we highly recommend you to relocate your extender referring to Position Your Extender.

2. 1. 3. Method 3: Via the TP-Link Tether App

1.Launch the Apple App Store or Google Play Store and search TP-Link Tether or simply scan the QR code to download and install the app.

OR

2.Go to Wi-Fi Settings and connect your device to the extender’s wireless network: TP-Link_Extender.

< Settings	Wi-Fi

Wi-Fi

CHOOSE A NETWORK...

TP-Link_Extender

Other...

3. Launch Tether and select your extender from the Local Device list.

9