TPI TPI1471 Owner Manual

Download

Page 1

Page 2

Amperage Chart & Electric Heat Products Limited Warranty

277

K.W

B.T.U.H.

Rating

00.5 1,706 2.4 1.4 2.3 1.3 2.2 1.3 2.1 1.2 1.8 0.6 0.6 0.5

01.0 3,413 4.8 2.8 4.5 2.6 4.3 2.5 4.2 2.4 3.6 1.3 1.2 1.0

02.0 6,826 9.6 5.5 9.1 5.2 8.7 5.0 8.3 4.8 7.2 2.6 2.4 2.1

03.0 10,239 14.4 8.3 13.6 7.9 13.0 7.5 12.5 7.2 10.8 3.9 3.6 3.1

04.0 13,652 19.2 11.1 18.2 10.4 17.5 10.1 16.6 9.6 14.4 5.2 4.8 4.2

05.0 17,065 24.0 13.8 22.7 13.1 21.7 12.6 20.8 12.0 18.1 6.6 6.0 5.2

06.0 20,478 28.8 16.6 27.3 15.7 26.1 15.1 25.0 14.4 21.7 7.9 7.2 6.3

07.0 23,891 33.6 19.4 31.8 18.4 30.4 17.6 29.1 16.8 25.3 9.2 8.4 7.3

08.0 27,304 38.5 22.2 36.4 20.9 34.9 20.1 33.3 19.2 28.9 10.5 9.6 8.4

09.0 30,717 42.8 24.9 40.9 23.3 39.1 22.6 37.7 21.4 32.5 11.8 10.8 9.5

10.0 34,130 48.1 27.4 45.4 26.2 43.5 25.1 41.7 24.0 36.1 13.2 12.0 10.5

11.0 37,543 52.9 30.5 50.0 28.6 47.8 27.6 45.8 26.4 39.7 14.5 13.2 11.6

12.0 40,956 57.7 33.2 54.5 31.5 52.1 30.2 50.0 28.6 43.3 15.8 14.4 12.6

13.0 44,369 62.5 36.0 59.1 34.1 56.9 32.7 54.2 31.3 46.9 17.1 15.6 13.7

14.0 47,782 67.3 38.8 63.6 36.7 60.9 35.2 58.3 33.7 50.5 18.4 16.8 14.7

15.0 51,195 72.1 41.5 68.2 39.1 65.2 37.7 62.5 35.1 54.2 19.8 18.0 15.8

16.0 54,608 76.9 44.3 72.7 41.9 69.6 40.2 66.7 38.5 57.8 21.1 19.2 16.9

17.0 58,021 81.7 47.1 77.3 44.3 73.9 42.7 70.8 40.9 61.4 22.4 20.4 17.9

18.0 61,434 86.5 49.8 81.8 47.2 78.3 45.2 75.0 43.3 65.0 23.7 21.6 19.0

19.0 64,847 91.3 52.6 86.4 49.6 82.6 47.7 79.2 45.7 68.6 25.1 22.8 20.0

20.0 68,260 96.1 55.1 90.9 52.5 86.9 50.3 83.3 48.1 72.2 26.4 24.0 21.1

21.0 71,673 100.0 58.2 95.6 55.1 91.3 52.9 87.5 50.5 75.8 27.7 25.2 22.1

22.0 75,086 105.8 60.9 100.0 57.7 95.7 55.3 91.7 52.9 79.4 29.0 26.4 23.1

23.0 78,499 110.6 63.7 14.5 60.4 100.0 57.9 95.8 55.3 83.0 30.3 27.6 24.3

24.0 81,912 115.4 66.5 109.1 62.9 104.3 60.3 100.0 57.7 86.6 31.7 28.8 25.3

25.0 85,325 120.2 69.2 113.6 65.3 108.6 62.8 104.1 60.1 90.3 33.0 30.1 26.4

26.0 88,738 125.0 72.0 118.2 68.3 113.0 65.3 108.3 62.5 93.9 34.3 31.3 27.4

27.0 92,151 129.8 74.8 122.7 70.9 117.4 67.8 112.5 64.7 97.5 35.6 32.5 28.5

28.0 95,564 134.6 77.2 128.2 73.5 121.7 70.3 116.6 67.3 101.1 36.9 33.7 29.5

29.0 98,977 139.4 80.3 131.8 76.0 126.0 72.9 120.8 69.7 104.7 38.3 34.9 30.6

30.0 102,390 144.2 83.1 136.4 78.7 130.4 75.4 125.0 72.1 108.3 39.6 36.1 31.7

31.0 105,803 149.0 85.9 140.9 81.3 134.7 77.9 129.2 74.5 111 .9 40.9 37.3 32.7

32.0 109,216 153.8 88.7 145.4 83.9 139.0 80.4 133.4 76.9 115.5 42.2 38.5 33.8

33.0 112,629 158.6 91.5 149.9 86.5 143.3 82.9 137.6 79.3 119.1 43.5 39.7 34.8

34.0 116,042 163.4 94.3 154.4 89.1 147.6 85.4 141.8 81.7 112.7 44.8 40.9 35.9

35.0 119,455 168.2 97.1 158.9 91.7 151.9 87.9 146.0 84.1 126.4 46.1 42.1 36.9

36.0 122,868 173.0 99.9 163.4 94.3 156.2 90.4 150.2 86.5 130.0 47.4 43.3 38.0

37.0 126,281 177.8 102.7 167.9 96.9 160.5 92.9 154.4 88.9 133.6 48.7 44.5 39.0

38.0 129,694 182.6 105.5 172.4 99.5 164.8 95.4 158.6 91.3 137.2 50.0 45.7 40.1

39.0 133,107 187.4 108.3 176.9 102.1 169.1 97.9 162.8 93.7 140.7 51.3 46.9 41.1

40.0 136,520 192.2 111 .1 181.4 104.7 173.4 100.4 167.0 96.1 144.4 52.6 48.1 42.2

41.0 139,933 197.0 113.9 185.9 107.3 177.7 102.9 171.2 98.5 148.0 53.9 49.3 43.2

42.0 143,346 201.8 116.7 190.4 109.9 182.0 105.4 175.4 100.9 151.6 55.2 50.6 44.3

43.0 146,759 206.6 119.5 194.9 112.5 186.3 107.9 179.6 103.3 155.2 56.5 51.8 45.3

44.0 150,172 211.4 122.3 199.4 115.1 190.6 110.4 183.8 105.7 158.8 57.8 53.0 46.4

45.0 153,585 216.2 125.1 203.9 117.7 194.9 112.9 188.0 108.1 162.5 59.1 54.2 47.4

46.0 156,998 221.0 127.9 208.4 120.3 199.2 115.4 192.2 110.5 166.1 60.4 55.4 48.5

47.0 160,411 225.8 130.7 212.9 122.9 203.5 117.9 196.4 112.9 169.7 61.7 56.6 49.5

48.0 163,824 230.6 133.5 217.4 125.5 207.8 120.4 200.6 115.3 173.3 63.0 57.8 50.6

49.0 167,237 235.4 136.3 221.9 128.1 212.1 122.9 204.8 117.7 176.9 64.3 59.0 51.6

50.0 170,650 240.2 139.1 226.4 130.7 216.4 125.4 209.0 120.1 180.5 65.6 60.2 52.7

51.0 174,063 245.0 141.9 230.9 133.3 220.7 127.9 213.2 122.5 184.1 66.9 61.4 53.7

52.0 177,476 249.8 144.7 235.4 135.9 225.0 130.4 217.4 124.9 187.7 68.2 62.6 54.8

53.0 180,889 254.6 147.5 239.9 138.5 229.3 132.9 221.6 127.3 191.3 69.5 63.8 55.8

54.0 184,302 259.4 150.3 244.4 141.1 233.6 135.4 225.8 129.7 194.9 70.8 65.0 56.9

55.0 187,715 264.2 153.1 248.9 143.7 237.9 137.9 230.0 132.1 198.6 72.2 66.2 57.9

56.0 191,128 269.0 155.9 253.4 146.3 242.2 140.4 234.2 134.5 202.2 73.5 67.4 58.8

57.0 194,541 273.8 158.7 257.9 148.9 246.5 142.9 238.4 136.9 205.8 74.9 68.6 59.9

58.0 197,954 278.6 161.5 262.4 151.5 250.8 145.4 242.6 139.3 209.4 76.2 69.8 60.9

59.0 201,367 283.4 164.3 266.9 154.1 255.1 147.9 246.8 141.7 213.0 77.5 71.0 62.3

60.0 204,780 288.2 167.1 271.4 156.7 259.4 150.4 251.0 144.1 216.6 78.8 72.2 63.0

Note: All custom built products are subject to 100% cancellation/ restock charges.

208 Volt

AMP Rating

1 PH 3 PH 1 PH 3 PH 1 PH 3 PH 1 PH 3 PH 1 PH 3 PH 3 PH 3 PH

220 Volt

AMP Rating

230 Volt

AMP Rating

240 Volt

AMP Rating

Rating

Volt

AMP

440 Volt

AMP

Rating

Heat Products

198 Series Elements 1 Year

Elements in Baseboard 10 Years

480 Volt

AMP

Rating

550 Volt

AMP

Rating

Products manufactured by TPI Corporation are warranted to the original consumer to be free from defects in material and workmanship for twelve (12) months from the original date of purchase. The TPI

warranty does not cover products modied

outside our factory, damage or failure caused by acts of God, abuse, misuse, connected to or placed on other than rated voltage, abnormal usage, faulty installation, failure to follow suggested maintenance procedures enclosed with the product, improper maintenance or any repairs other than those provided by an authorized TPI Corporation service center.

There are no obligations or liabilities on the part of the corporation for consequential damages arising out of, or in connection with, the use or performance of the product, or other indirect damages with respect to loss

of property, revenues, or prot, or costs of

removal, installation or reinstallation.

All implied warranties with respect to TPI products, including implied warranties for merchantability and implied warranties for

tness, are limited in duration to twelve

(12) months from original date of purchase, except those products or parts of products which are warranted for longer periods. On such products or parts of products all implied

warranties for merchantability and tness

are limited to the duration of the extended warranty period thereon.

Some states do no allow the exclusion or limitation of incidental or consequential damages and some states do not allow limitations on how long an implied warranty lasts. The above exclusions or limitations may not apply to you.

During the warranty period, TPI Corporation will, at its sole option, repair or replace any defective parts or products returned, freight prepaid, to the TPI Corporation factory or such other location as TPI Corporation may designate. Returned products must be packaged carefully and TPI Corporation shall not be responsible for damage in transit. When returning parts, the owner must provide the model number

of the product and nature of difculty being

experienced. This warranty does not obligate TPI Corporation to bear the cost of labor in replacing any assembly, unit or component part thereof, nor does the company assume any liability for secondary charges, expenses for installing or removal, freight or damages. There will be charges rendered for product repairs made after out warranty period has expired. Proof of purchase, including date, must accompany request for in-warranty service. In any event, TPI Corporation’s maximum liability shall not in any case exceed the list price for the product claimed to be defective. This warranty gives to you

specic legal rights and you may have other

rights, which may vary, from state to state. For the name of you nearest authorized TPI Corporation service center, please write to TPI Corporation, P.O. Box 4973, Johnson City, Tennessee, 37602.

All Other Heating Products 1 Year

Thermostats & Controls 2 Years

In addition to the Limited Warranty stated above covering general products, TPI Corporation extends this warranty on the following listed products, which are warranted to the original consumer from the original date of purchase for the total time periods indicated herein to the left:

Page 3

Electric Heat Comfort Zones

INSULATION

R-VALUE Recommended FHA Standard Minimum: Not Recommended

Ceiling *R-24 *R-19 *R-11

Walls R-13 11 R-7

Floor R-24 11 ----

ZONE APPROXIMATE WATTAGE NEED PER SQUARE FOOT

1 8.6 10.0 14.6

2 7.7 9.0 13.1

3 7.1 8.2 12.0

4 6.4 7.4 10.8

5 6.0 7.0 10.2

*”R”values are industry standards for insulation effectiveness. Ask company representative for assistance if you do not know “R” for your present structure insulation.

Baseboard or wall mount style? Recessed or surface type? It’s easy to select the heater that’s right for you.

1. Measure the size of the room(s) or area you intend to heat for square footage. You will need the length times the width to get this calculation.

2. Find your location on the map above. This determines your basic heating zone.

3. The chart shown below the map lists insulation values based on the effectiveness of the insulation presently in your home. Find your heating zone on the chart and the approximate wattage per square foot you will need.

4. Multiply the total number of square feet you intend to heat by the approximate wattage per square foot you just obtained. This will determine your total heating requirement in watts for the room.

How Much Heat is Right For You?

Figures are based on 15% total window and door openings in outside walls, and 3/4 total home air changes per hour. Typical frame-type construction with unheated basement or unventilated crawl space. If you do not have storm doors and windows, add 30% to the watts per square foot (multiply by 1.3).

That’s all there is to it! Now choose the heater with a wattage equal to what you need. Your nal selection will, of course,

depend on available wall space, window placement, ect.

Sample Calculation: Example = 10’ x 12’ room in Zone 3 with FHA standard insulation

1. Determine room square footage: 10’ x 12’ = 120 sq. ft.

2. Zone 3 with FHA standard insulation requires 8.2 watts per sq. ft.

3. Multiply square footage of room to be heated by the approximate wattage per square foot required.

120 sq. ft x 8.2 watts = 984 watts required. From this calculation it can be reasoned that a 1000 watt heater would be required.

Page 4

HLA Series Hazardous Location Fan Forced Unit Heater

FAN-FORCED SUSPENDED UNIT HEATERS 3-25 KW FOR T-3B CLASS I, GROUP C & D,

DIVISION 1 & 2 AND CLASS II, GROUPS E, F & G, DIVISIONS 1 & 2.

• Designed for rugged industrial applications in hazardous locations

where the possibility of explosion or re exists due to the presence of certain ammable gases, vapors, powdered metals or dust.

• Permanently sealed, liquid to air, nned tube heat exchanger core.

• Ethylene Glycol to water mixture used as a heat transfer uid in the heater core, providing -45° C. (-49° F) freeze damage protection.

• High-performance electric motor driven fan blows air across nned tubes to effect uniform heat transfer and area heat distribution.

• Manual Reset capillary type limit provides high temperature regulation and is rated for 6,000 cycles of service.

Shown with optional pilot light and disconnect switch

• Stainless steel and aluminum pressure relief valve for overpressure.

• A back-up contactor is included for additional protection.

• 14 gauge steel cabinet powder coated epoxy paint nish contains heater

core, motor, and fan assembly.

• Narrow gap safety fan guard shields all moving parts.

• Adjustable louvers allow directional control of air.

Manufactured in U.S.A.

• Copper conductor wires enclosed in rigid metal conduits carry all electrical power.

• Box lugs furnished for eld connections within approved enclosure.

Product Specications

Heat Exchanger and Elements:

Heavy walled, painted carbon steel with aluminum ns liquid heat exchanger, liquid lled with three-immersion type copper

sheathed elements. The elements shall have the highest quality nickel-chromium resistance wire encased in a magnesium oxide

dielectric and be hermetically sealed into the heat exchanger core. The heat transfer uid is Ethylene-glycol solution for operation

to -49 degrees F (– 45 degrees C). Stainless steel and aluminum pressure relief valve for overpressure.

Thermal Cutout High Limit Protection and Optional Pilot Light:

The capillary type manual reset thermal cutout shall be rated for 6000 cycles of service and mounted in the liquid lled heat

exchanger. An optional pilot light to indicate manual reset tripped, if safe operating temperatures are exceeded, is located on control enclosure.

Motor: The motor shall be a permanent split capacitor type, permanently lubricated, ball bearing type. The motor shall be rated for hazardous location and operate at rated voltage of heater, 60 Hz, 1725 RPM.

Control Enclosure:

All controls shall be factory installed and wired in a hazardous location enclosure. Contactors and back-up contactors are heavy duty type and break all ungrounded conductors and be rated for 100,000 cycles at full load. Standard 24-Volt control circuit shall

be supplied by internal class II transformer. An optional factory wired integral thermostat or standard terminal block for eld

wiring to optional remote wall thermostat are wired in control panel. No fan delay relay.

Disconnect Switch:

Factory mounted and wired hazardous location disconnect switch is available as optional accessory.

Cabinet With Adjustable Louvers:

The Cabinet shall be 14 gauge, cold rolled steel with powder coated epoxy nish. Plated fan guards with less than 1/4 inch

spacing to cover motor and fan shall conform to OSHA Requirements.

Note:

Before selecting a hazardous location electric heater refer to Article 500 or other applicable standard referenced in the National Electric Code.

Liquid-to-air heat exchanger Optional built-in thermostat Hazardous Location Rated Motor

Page 5

HLA Series Hazardous Location Fan Forced Unit Heater

Rating Denitions

CLASS I: Equipment does not have surface operating temperature in excess of the ignition temperature of the specic gas or vapor.

Application Examples:

• Offshore and land based drilling rigs, petroleum exploration and testing facilities.

• Petroleum reneries, gasoline storage and dispensing areas.

• Industrial rms that use ammable liquids in dip tanks for parts cleaning or other operations.

• Petrochemical companies that manufacture chemicals from gas or oil.

• Dry cleaning facilities where vapors from cleaning uids may be present.

• Aircraft hangers and fuel servicing areas.

• Utility gas plants and operations involving storage and handling of liqueed petroleum or natural gas.

GROUP C: Atmospheres such as but not limited to acetaldehyde, allyl alcohol, hydrogen sulde, ethylene, carbon monoxide, or

other gases or vapors of equivalent hazard.

GROUP D: Atmospheres such as but not limited to acetone, alcohol, gasoline, lacquer solvent vapors, natural gas, propane or other gases or vapors of equivalent hazard.

CLASS II: Equipment does not have surface temperature greater than the ignition temperature of the specied dust.

Application Examples:

• Coal preparation plants and other carbon handling or processing areas.

• Grain elevators, our and feed mills.

• Plants which manufacture, use or store Magnesium or Aluminum powders.

• Plants that have chemical or metallurgical processes.

• Producers of starch products or candy.

• Spice grinding plants, sugar plants and cocoa plants.

GROUP E: Atmosphere containing combustible metal dust regardless of resistivity, or other combustible dust of similar hazard characteristics having resistivity of less than 105 OHM - Centimeter.

GROUP F: Atmosphere containing carbon black, charcoal, coal or coke dust.

GROUP G: Atmospheres containing combustible dust having resistivity of 105 OHM-Centimeter or greater.

DIVISION I: A location in which ignitable concentrations of ammable material exist under normal operating conditions.

DIVISION II: Locations in which ammable materials will normally be conned within closed containers and escape only in the

case of accidental rupture, breakdown or during maintenance operations. Any equipment approved for Division I is automatically also approved for Division II.

Standard Hazardous Location Models

UPC#

686334

734356 HLA 12-208160-3.0-24 734004 HLA 12-208360-3.0-24 208 3 9.8 734011 HLA 12-240160-3.0-24 240 1 14.8 734028 HLA 12-240360-3.0-24 240 3 8.6 734035 HLA 12-480360-3.0-24 480 3 4.3 734363 HLA 12-208160-5.0-24 734059 HLA 12-208360-5.0-24 208 3 15.4 734066 HLA 12-240160-5.0-24 240 1 23.1 734073 HLA 12-240360-5.0-24 240 3 13.4 734080 HLA 12-480360-5.0-24 480 3 6.7 734370 HLA 12-208160-7.5-24 734103 HLA 12-208360-7.5-24 208 3 22.3 734110 HLA 12-240160-7.5-24 240 1 33.6 734127 HLA 12-240360-7.5-24 240 3 19.4 734134 HLA 12-480360-7.5-24 480 3 9.7 734158 HLA 16-208360-10.0-24 734165 HLA 16-240160-10.0-24 240 1 44 734172 HLA 16-240360-10.0-24 240 3 25.5 734189 HLA 16-480360-10.0-24 480 3 12.7 734202 HLA 20-208360-15.0-24 734219 HLA 20-240360-15.0-24 240 3 38.1 734226 HLA 20-480360-15.0-24 480 3 19 734233 HLA 20-600360-15.0-24 600 3 15.2 734240 HLA 20-480360-20.0-24 734257 HLA 20-600360-20.0-24 600 3 20 734264 HLA 20-480360-25.0-24 734271 HLA 20-600360-25.0-24 600 3 24.9

Note: Products listed in this section are custom built and subject to 100% cancellation/restock charges.

MODEL KW BTU’s VOLTS PH AMPS

208 1 16.3

3 10250

208 1 26

5 17100

208 1 38

7.5 25600

208 3 29.3

10 34150

208 3 43.5

15 51200

20 68300

25 85400

480 3 25.1

480 3 31.1

Control Voltage

Temp

Rise °F

Air

Throw

16.5

27.6 8’ 167 lb. 9378

41.4 8’ 167 lb. 9749

21.7 40’ 1500 10’ 193 lb. 10313

19.2

26.2

32.8 12168

CFM

24’ 580

43’ 2450 13’

Recom’d

Mounting Ht.

8’ 167 lb. 8999

193 lb. 10760

225 lb.

WT. LIST

11176

Page 6

HLA Series Hazardous Location Fan Forced Unit Heater

Mounting Bracket Kits

Column stabilizing components

Mounting arm assembly

Attachment assembly

1/2” Pipe (Not Supplied)

Roof or overhead structure

3 1/2” Schedule 40 (Pipe) (Not Supplied)

Base assembly

HLPM Pipe Mounting Kit

Particularly useful in buildings with

insufcient strength to use other types of

mounts. Requires 3 1/2’’ pipe (4’’ O.D. not supplied).

HLHM Hanging Mounting Kit

Simple and economical if adequate overhead structure exists. Requires 1/2’’ pipe, cut and threaded (not supplied).

Wall bracket

Mounting arm Attachment assembly

Wall or structure

HLWM Wall Mounting Kit

Ideal for use in buildings that have substantial walls. Arm only can also be bolted directly to structural steel.

UPC#

686334

734288 HLPM37 3.0 kW - 7.5 kW 37

734301 HLPM1525 15.0 kW - 25.0 kW 40 734318 HLHM ALL 5 191 734325 HLWM37 3.0 kW - 7.5 kW 27

734349 HLWM1525 15.0 kW - 25.0 kW 29

MODEL USE WITH HEATERS

WT.

(LBS.)

LIST

479734295 HLPM10 10.0 kW 38

399734332 HLWM10 10.0 kW 28

EPET Series and HLT Series Hazardous Location Thermostats For Single Phase

HLT Series

Features

• SPDT & DPDT Models

• Heat or cool compatible

• Celsius and Fahrenheit temperature scale

• Bi-Metal or capillary sensor

• Snap action switch

• Casting tapped top and bottom for 3/4” conduit

• 1/2” thick cast aluminum housing

• Dimension 5.75” x 6.375” x 5.57”

Motor Rating (full load): 3/4 HP @ 125V, 1 1/2 HP @250V Pilot Duty Rating 125VA @ 24VAC NEMA Class Seven Div. 1 Approved Class I Group C & D, Class II Group E, F, & G Not rated for Group B

UPC#

686334

538077 EPETD8D DPDT - Bi-Metal 22A @120-277VAC 50-90oF

538107 EPETD8S SPDT - Bi-Metal 22A @120-277VAC 50-90oF

528078 EPETP8D DPDT - Bi-Metal 22A @120-480VAC 50-90oF

528061 EPETP8S SPDT - Bi-Metal 22A @120-480VAC 50-90oF

523158 H LT-1 SPDT - Capillary 22A @120-277VAC 40-110oF

523165 H LT-2 DPDT - Capillary 22A @120-277VAC 40-110oF

HLT Series incorporates screwdriver temperature adjustment slot and all metal housing. External bulb

MODEL DESCRIPTION LOAD RATINGS RANGE LIST

337

476

502

Master ctn: 4 pcs, 24 llbs (varies slightly by model), 16” x 14.5” x 6”

EPET Series incorporate plastic knob & Bi-Metal Sensor housing.

and capillary sensor.

Page 7

HLA Series Hazardous Location Fan Forced Unit Heater

Factory Installed Accessories & Physical Dimensions

(Top View)

SUFFIX DESCRIPTION

T In-Built single pole thermostat 50° - 90° F 318

120 Control transformer w/ primary fusing (Delete 24 sufx - add 120) 228

208

240

D Disconnect Switch 1574

P Pilot Light 882

MODEL A B

HLA 12 17 3/4 22 3/8 19 3/4 20 5/8 16 1/4 10 1/2 14 3

HLA 16 20 3/4 26 3/8 20 3/4 21 5/8 20 1/4 11 1/2 18 4

HLA 20 24 3/4 30 3/8 22 1/2 N/A 24 1/4 12 1/2 22 4 1/2

208/240V Control available on 208/240V units

(Delete 24 sufx and add 208 OR 240)

3 ph. 1 ph.

D E F G

(Rear View)

LIST

ADDER

Subtract

(Front View)

(Side View)

PHLA Series Portable Hazardous Location Fan Forced Unit Heater

• 3.0 through 25 KW rating

• 208, 240, 480, 600 Volt available in selected capacities

• Cart has anti-static wheels to reduce the risk of static discharge

• Wheeled cart allows for easy maneuverability

• Cart has integrated fork-lift channels to provide ease of lifting on to ramps or trucks

• Excellent for providing seasonal heating in hazardous environments

• All units have disconnect switch, pilot light, and thermostat - standard

• 24 Volt control, transformer, and contactor in NEMA 7 enclosure

• Durable epoxy coating on heater housing

• Hazardous location unit mounted male / female plug

• Adjustable louvers; manual reset

Standard Portable Hazardous Location Models

UPC # 686334 739344 PHLA12-208160-3.0-24-TDP 739337 PHLA12-208360-3.0-24-TDP 208 3 9.8 739320 PHLA12-240160-3.0-24-TDP 240 1 14.8 739313 PHLA12-240360-3.0-24-TDP 240 3 8.6 739306 PHLA12-480360-3.0-24-TDP 480 3 4.3 739436 PHLA12-600360-3.0-24-TDP 600 3 3.5 739290 PHLA12-208160-5.0-24-TDP 739283 PHLA12-208360-5.0-24-TDP 208 3 15.4 739276 PHLA12-240160-5.0-24-TDP 240 1 23.1 739269 PHLA12-240360-5.0-24-TDP 240 3 13.4 739252 PHLA12-480360-5.0-24-TDP 480 3 6.7 739429 PHLA12-600360-5.0-24-TDP 600 3 5.4 739245 PHLA12-208160-7.5-24-TDP 739238 PHLA12-208360-7.5-24-TDP 208 3 22.3 739221 PHLA12-240160-7.5-24-TDP 240 1 33.6 739214 PHLA12-240360-7.5-24-TDP 240 3 19.4 739207 PHLA12-480360-7.5-24-TDP 480 3 9.7 739412 PHLA12-600360-7.5-24-TDP 600 3 7.8 739191 PHLA16-208360-10.0-24-TDP 739184 PHLA16-240160-10.0-24-TDP 240 1 44 739177 PHLA16-240360-10.0-24-TDP 240 3 25.5 739160 PHLA16-480360-10.0-24-TDP 480 3 12.7 739405 PHLA16-600360-10.0-24-TDP 600 3 10.2 739153 PHLA20-208360-15.0-24-TDP 739146 PHLA20-240360-15.0-24-TDP 240 3 38.1 739139 PHLA20-480360-15.0-24-TDP 480 3 19 739399 PHLA20-600360-15.0-24-TDP 600 3 15.2 739122 PHLA20-480360-20.0-24-TDP 739382 PHLA20-600360-20.0-24-TDP 600 3 20

739115 PHLA20-480360-25.0-24-TDP

739375 PHLA20-600360-25.0-24-TDP 600 3 24.9

Note: Products listed in this section are custom built and subject to 100% cancellation/restock charges.

MODEL KW BTU VOLTS PH AMPS

208 1 16.3

3 10,250

208 1 26

5 17,100

208 1 38

7.5 25,600

208 3 29.3

10 34,150

208 3 43.5

15 51,200

20 68,300

25 85,400

480 3 25.1

480 3 31.1

TEMP

RISE F

16.5 24’ 580 260 19,950

27.6 24’ 580 260 20,300

41.4 24’ 580 260 20,700

21.7 40’ 1500 305 22,400

19.2 43’ 2450 350 24,140

26.2 43’ 2450 350 24,600

32.8 43’ 2450 350 25,400

AIR

THROW

CFM WT LIST

Page 8

FEP Series Single Phase Hazardous Location Wall Convector

Standard Unit

Unit with optional control section containing disconnect, pilot light, and thermostat

(Sufx C1-TDP)

Unit with in-built EPET line voltage thermostat

(Sufx T1 or T2)

Manufactured in U.S.A.

• Cabinet size 18” high, 9” wide.

• Bottom In - Front Out air ow.

• Wall mounting bracket supplied.

• Units cannot be operated in room ambients exceeding 104OF (40OC).

• Heavy duty 16 gauge steel with gray

epoxy textured powder coated nish.

• 9” minimum clearance from bottom of

heater to oor required.

• Stainless steel cartridge element inserted

into Aluminum nned Copper sheath.

• Standard unit (without EPET thermostat or control section) is NEMA 4 rated.

Class 1, Group B, C & D Division 1 & 2 280° C / 536° F

UPC

686334 LENGTH

445146 FEP-1812-1RA

445153 FEP-1820-1RA 208 8.7

445160 FEP-1824-1RA 240 7.5

445177 FEP-1827-1RA 277 6.5

445184 FEP-1848-1RA 480 3.8

445191 FEP-3620-1RA

445207 FEP-3624-1RA 240 15.0

445214 FEP-3627-1RA 277 13.0

445221 FEP-3648-1RA 480 7.5

445238 FEP-3657-1RA 600 6.0

445245 FEP-3820-1RA

445252 FEP-3824-1RA 240 15.8

445269 FEP-38271-RA 277 13.7

445276 FEP-3848-1RA 480 7.9

445283* FEP-7620-1RA

445290* FEP-7624-1RA 240 31.7

445306* FEP-7627-1RA 277 27.4

445313 FEP-7648-1RA 480 15.8

445320 FEP-7657-1RA 600 12.7

MODEL WATTS BTU's VOLTS AMPS

T-2A SERIES SINGLE PHASE

CABINET

120 15.0

1800 6143

208 17.3

3600 12286

208 18.3

3800 12969

208 36.5

7600 25938

*Items may not be used with 22 Amp line voltage thermostat

Class 1, Group B, C & D Division 1 & 2 180° C / 356° F

445337 FEP-0812-1RA

445344 FEP-0820-1RA 208 3.8

445351 FEP-0824-1RA 240 3.3

445368 FEP-0827-1RA 277 2.9

445375 FEP-0848-1RA 480 1.7

445382 FEP-1612-1RA

445399 FEP-1620-1RA 208 7.7

445405 FEP-1624-1RA 240 6.7

445412 FEP-1627-1RA 277 5.8

445429 FEP-1648-1RA 480 3.3

445436 FEP-1657-1RA 600 2.7

445443 FEP-1712-1RA

445450 FEP-1720-1RA 208 8.2

445467 FEP-1724-1RA 240 7.1

445474 FEP-1727-1RA 277 6.1

445481 FEP-1748-1RA 480 3.5

445498 FEP-3420-1RA

445504 FEP-3424-1RA 240 14.2

445511 FEP-3427-1RA 277 12.3

445528 FEP-3448-1RA 480 7.1

445535 FEP-3457-1RA 600 5.7

T-3A SERIES SINGLE PHASE

120 6.7

800 2730

120 13.3

1600 5460

120 14.2

1700 5802

208 16.3

3400 11604

WT.

(LBS.)

34” 50 1493

34” 54 2278

58” 80 2416

58” 85 2811

34” 50 1493

34” 54 2278

58” 80 2416

58” 85 2811

LIST

Factory Installed Control Options

SUFFIX* DESCRIPTION LIST SUFFIX** DESCRIPTION LIST

*Remove - RA sufx and add new sufx. **Remove - RA sufx and add new sufx (Not NEMA washdown rated or rated for Group B atmospheres) Sufx “T” is 22 Amps maximum.

Note: Products listed in this section are custom built and subject to 100% cancellation/restock charges.

EPETD8S single pole thermostat factory

mounted to 120V - 480V units

EPETD8D double pole thermostat factory

mounted to 120V - 480V units

578 C1-TD

599 C1-TDP

Control section with transformer, 24V contactor, SP thermostat

(40OF - 90OF) and disconnect switch (all units)

Control section with transformer, 24V contactor, SP thermostat

(40OF - 90OF), disconnect switch & pilot light (all units)

1986

2063

Page 9

FEP Series Three Phase Hazardous Location Wall Convector

• Cabinet size 18” high, 9” wide.

• ABS (American Bureau of Shipping) type approved.

• Bottom In - Top Out air ow.

• Wall mounting bracket supplied.

• Units can not be operated in room ambients exceeding 104OF (40OC).

• Heavy duty 16 gauge steel with gray epoxy textured powder coated nish.

• 9” minimum clearance from bottom of heater to oor required.

• Stainless steel cartridge element inserted into Aluminum nned Copper sheath.

• Standard unit (without EPET thermostat or control section) is NEMA 4 rated.

UPC

686334 LENGTH

483056 FEP-1820-3RA 483063 FEP-1824-3RA 240 4.3 486224 FEP-1848-3RA 480 2.2 1869 483070 FEP-3620-3RA 483087 FEP-3624-3RA 240 8.7 486231 FEP-3648-3RA 480 4.3 2726 483094 FEP-3820-3RA 483100 FEP-3824-3RA 240 9.1 486248 FEP3848-3RA 480 4.6 2999 483117 FEP-7620-3RA

486255 FEP-7648-3RA 480 9.2

483131 FEP-0820-3RA

483148 FEP-0824-3RA 240 1.9

486262 FEP-0848-3RA 480 0.9 1869

483155 FEP-1620-3RA

483162 FEP-1624-3RA 240 3.8

486279 FEP-1648-3RA 480 1.9 2726

483179 FEP-1720-3RA

483186 FEP-1724-3RA 240 4.1

486286 FEP-1748-3RA 480 2.0 2999

483193 FEP-3420-3RA

486293 FEP-3448-3RA 480 4.1

Class 1, Group B, C, & D Divisions 1 & 2 280° C / 536° F

MODEL WATTS BTU's VOLTS AMPS

Class 1, Group B, C & D Division 1 & 2 180° C / 356° F

T-2A SERIES THREE PHASE

208 5.0

1800 6143

208 10.0

3600 12286

208 10.5

3800 12969

208 21.1

7600 25938

T-3A SERIES THREE PHASE

208 2.2

800 2730

208 4.4

1600 5460

208 4.7

1700 5802

208 9.4

3400 11604

CABINET

34” 50

34” 54

58” 80

58” 85 3223483124 FEP-7624-3RA 240 18.3

34” 50

34” 54

58” 80

58” 85 3192483209 FEP-3424-3RA 240 8.2

WT.

(LBS.)

LIST

1719

2622

2784

1719

2622

2784

Standard Unit

Unit with optional control section containing disconnect, pilot light, and thermostat

(Sufx C1-TDP)

Note: Controls mounted on the left side only.

*T1 and T2 option not available on 3 phase models

Factory Installed Control Options

SUFFIX** DESCRIPTION

C1-TD Control section with transformer, 24V contactor, SP thermostat (40OF - 90OF) and disconnect switch (all units) 1971

C1-TDP

Control section with transformer, 24V contactor, SP thermostat (40OF - 90OF), disconnect switch & pilot light (all units)

Note: C1-TD and C1-TDP are only options available for 3 phase units.

Remote Mounted Hazardous Location Thermostats For Single Phase Models Only

**Remove - RA sufx and

LIST

add new sufx (Not NEMA

washdown rated or rated for

2047

Group B atmospheres)

HLT Series

EPET Series Parameters

Dimensions: Height 5 5/8’’, Width 6 3/8’’, Depth 4 1/2’’ Finish: Silver-Gray

UPC#

686334

538077 EPETD8D DPDT - Bi-Metal 22A @120-277VAC 50-90oF

538107 EPETD8S SPDT - Bi-Metal 22A @120-277VAC 50-90oF

528078 EPETP8D DPDT - Bi-Metal 22A @120-480VAC 50-90oF

528061 EPETP8S SPDT - Bi-Metal 22A @120-480VAC 50-90oF

523158 HLT-1 SPDT - Capillary 22A @120-277VAC 40-110oF 476

523165 HLT-2 DPDT - Capillary 22A @120-277VAC 40-110oF 502

HLT Series incorporates screwdriver temperature adjustment slot and all metal housing. External bulb and capillary sensor.

MODEL DESCRIPTION LOAD RATINGS RANGE LIST

Master ctn: 4 pcs, 24 lbs (varies slightly by model), 16” x 14.5” x 6”

EPET Series incorporates plastic knob & Bi-Metal Sensor housing.

Motor Rating: (full load) 1 1/2 HP @ 250V Rating: 22A @ 125-277VAC; 125VA @ 24VAC Rated: Class I Group C & D, Class II Group E, F, G Thermostat is not rated for use in Group B environments.

Type: Single or Double Pole

Note: Products listed in this section are custom built and subject to 100% cancellation/restock charges.

337

Page 10

FIG. 2

5500 Series Washdown Fan Forced Unit Heater

Rear View

Manufactured in U.S.A.

• Heavy-duty 304 16 gauge stainless steel shroud.

• 316 stainless construction available.

• Nema 4x non-metallic control panel.

• 24-Volt transformer and control panel.

• 3-position switch (off-heat-fan).

• Capillary thermostat with stainless steel sensor.

• Automatic reset thermal cutout.

• Totally enclosed U.L. listed motor.

• Pilot light (power on indicator).

Control Panel

Mounting Bracket Kits & Product Dimensions

The Washdown Series unit heaters are electric unit heaters constructed for use in areas that require washing or hosing of equipment due to dirty or dusty industrial environments in non-hazardous locations. The totally enclosed water-tight construction made with corrosion-resistant material make this series ideal for industrial heating applications. The Washdown Series is constructed with all built-in controls and safety temperature controls wired in a non-metallic Nema 4x control panel with single-point power connections.

•

Stainless steel nned tubular element. Constructed of 304 or 316 stainless rod and ns.

• Control panel on bottom of unit for ease of installation and service.

• Disconnect switch with enclosure door interlock.

• Front grill rotates to direct airow.

• Single-point power connection.

• Fan Blade Epoxy coated Aluminum.

• Epoxy painted cold roll steel model available, consult factory

• Meets all U.L., NEC, and OSHA requirements (when installed as directed).

• Corrosion-resistant in high humidity and water-saturated areas (for areas where corrosion resistance is needed in non-explosive areas, contact factory for heater applications and optional materials).

•ABS (American Bureau of Shipping) type approved.

• Thermostat temp range: 40o-100oF

SIZEKWUPC#

686334

3.3-15 713672 A5520/UHB 293 713726 W5520/WMK

20-48 ---- - 713733 W5550/WMK 713719 H5550/HMK 713696 P5550/PMK

* Material: Heavy Duty Epoxy Powder Coat Finish.

3-15 Kw ONLY

STAINLESS STEEL

COMBINATION BRACKET

Ideal for use in buildings that have substantial walls. Arm (only) can be bolted directly to structural steel.

A5520

FIG. 1

LIST

WALL BRACKET

MOUNTING ARM

WALL OR STRUCTURE

W5550

UPC#

686334

WALL MTG. BRACKET *

Simple and economical if adequate overhead structure exists. Requires 1/2" pipe, cut and threaded (not supplied).

ROOF OR OVERHEAD STRUCTURE

1/2" PIPE (NOT SUPPLIED)

H5550

UPC#

LIST

686334

713702 H5520/HMK

417

Particularly useful in buildings with insufficient strenth to use other types of mounts. Requires 3 1/2" pipe (4" O.D.-not supplied).

HANGING

BRACKET *

3 1/2" SCHEDULE 40 PIPE (NOT SUPPLIED)

LIST

293

P5550

UPC#

686334

713689 P5520/PMK

COLUMN STABILIZING COMPONENETS

PIPE MTG.

BRACKET *

MOUNTING ARM ASSY.

BASE ASSEMBLY

LIST

417

FIG. 3

Heater

3-7.5 12.00 18.00 19.75 15.25 16.25

10-15 14.00 19.00 21.75 15.25 18.00 8.00 6.00

20-30 16.00 27.00 28.75 19.50 17.50 15.50 4.50

40-48 18.00 31.00 30.75 19.50 19.50 21.75 2.75

Heater Dimension in Inches unless otherwise stated.

A B C D E F G H

8.00 6.00

6 ft.

Page 11

5500 Series Washdown Fan Forced Unit Heater

Enclosure and Motor:

Element housing shall be 16 gauge 304 or 316 stainless steel shroud. The outlet grill and louver assembly shall be 304/316 stainless steel and rotate for direction of discharge air. The heater shall have a 304/316 stainless steel inlet grill and fan guard. The motor shall be totally enclosed, permanently lubricated and designed to resist moisture and corrosion. The fan blade shall be aluminum with a

powder coated epoxy nish.

Element: The heating element shall be 304 or 316 stainless steel tube with

304/316 stainless steel n

material helically attached to the tube for even heat transfer. The element designed with the highest quality nickelchromium resistance wire embedded in compacted

efcient dielectric to ensure

proper heat transfer.

Control Panel: The control enclosure shall be non-metallic Nema 4X control panel watertight and dust- tight. The enclosure and elements are attached to the control panel with stainless steel fasteners. Standard control components are factory mounted and wired with access through control panel door on bottom of heater assembly. A standard door interlock disconnect switch shall be factory mounted and wired for safety.

Controls: All controls shall be factory mounted and wired in Nema 4X panel. Terminal block, 24 Volt transformer, high temperature limits, contactor and fusing if required by NEC are mounted and wired in control panel. A three-position switch (OffHeat-Fan) shall be mounted on side of control panel for access from outside of panel. A pilot light to indicate power is on for safety shall be located on side of control panel. A wall mounted Nema 4X thermostat is an optional accessory.

Mounting Bracket: A formed 304/316 stainless steel bracket shall be used on 3.3 thru 15 KW units. A cast iron epoxy painted bracket shall be used on 20 thru 48 KW units. Above brackets shall be combination wall/ceiling type. Optional mounting brackets are available.

Note: For 60Amp disconnect add $50.00 Net. Add ‘D’ as the sufx; For optional monel elements, add 40% to

the net of the heater. For powder coat epoxy painting of shroud, add $210 list to heater pricing. For 316 stainless add 20% to net price of the heater.

Note: Products listed in this section are custom built and subject to 100% cancellation/restock charges.

Product Specications & Standard Washdown Models

UPC#

686334

713047 F1F5503T

713054 F3F5503T 208 3 9.2

713061 H1H5503T 240 1 13.7

713078 H3H5503T 240 3 7.9

713085 G1G5503T 277 1 11.9

713092 P3P5503T 480 3 4

713115 F1F5505T

713122 F3F5505T 208 3 13.9

713139 H1H5505T 240 1 20.8

713146 H3H5505T 240 3 12.1

713153 G1G5505T 277 1 18.1

713160 P3P5505T 480 3 6.1

713184 F1F5507T

713191 F3F5507T 208 3 20.8

713207 H1H5507T 240 1 31.3

713214 H3H5507T 240 3 13.1

713221 G1G5507T 277 1 27.1

713238 P3P5507T 480 3 9.1

713252 F1F5510T

713269 F3F5510T 208 3 27.7

713276 H1H5510T 240 1 41.2

713283 H3H5510T 240 3 24.1

713290 G1G5510T 277 1 36.1

713306 P3P5510T 480 3 12.1

713399 F1F5515T

713405 F3F5515T 208 3 41.7

713412 H1H5515T 240 1 62.5

713429 H3H5515T 240 3 36.1

713443 P3P5515T 480 3 18.1

713467 F3F5520T

713481 P3P5520T 480 3 24.1

713504 F3F5525T

713528 P3P5525T 480 3 30.1

713542 F3F5530T

713566 P3P5530T 480 3 36.1

713603 P3P5540T 40 136520 480 3 48.2 70

713641 P3P5548T 48 163824 480 3 57.8 84 10484

MODEL KW BTU’s VOLTS PH AMPS

208 1 15.9

3.3 11200

208 1 24.1

5 17100

208 1 36.1

7.5 25600

208 1 47.8

10 34130

208 1 72.1

15 51200

208 3 55.6

20 68260

208 3 69.5

25 85325

208 3 83.4

30 102390

CONTROL

VOLTAGE

TEMP

RISE °F

40 4103

60 4673

68 6448

56 7407713511 H3H5525T 240 3 60.2

68 8087713559 H3H5530T 240 3 72.3

AIR

THROW

CFM

20’ 400 58

28’ 700 64

35’ 1400 92

42’ 1800 126

WT.

(lbs.)

LIST

3953

5623

7407713474 H3H5520T 240 3 48.2

8431

Remote Rain-Tight Thermostat

UPC#

686334

523424 TW155A 1 POLE, 40-110 deg F, 22Amp 179

523431 TW255A 2 POLE, 40-110 deg F, 22Amp 209

Note: NEMA 4X Construction Stainless Steel Hardware

MODEL DESCRIPTION LIST

Page 12

HOW TO DESIGNATE A MODEL:

UH Series Horizontal Fan Forced Unit Heater

3.3 KW THROUGH 48 KW HORIZONTAL DISCHARGE SUSPENDED FAN FORCED UNIT HEATERS AVAILABLE IN 1 OR 3 PHASE FOR ALL STANDARD VOLTAGES FROM 208V TO 480V.

CONSTRUCTION:

Heavy gauge welded steel cabinet with powder coated nish and control

compartment with a hinged and latched access door, simplifying wiring installation & maintenance.

HEATING ELEMENT:

Circular copper clad steel sheath element with continuously brazed steel ns

formed to match the air delivery pattern of the fan blade. OVERHEAT PROTECTION:

All units come equipped with automatic resetting type limit controls to deenergize the heater should an over-temperature situation occur.

FAN and MOTOR: Totally enclosed, single phase, permanently lubricated, thermally protected

Manufactured in U.S.A.

NOTE: Louver assembly is square and mounted with screws. Louver can be removed and repositioned for four

(4) directional air ow - left - right - up - down with the

heater in the horizontal position.

FACTORY INSTALLED OPTIONS:

• 24 Volt transformer on 3 KW to 15KW units to convert from line voltage to low voltage remote thermostat operation.

• Summer fan switch to operate the fan only.

• Fan delay switch to purge all residual heat from the unit after the heating element has cycled off.

• Powder coated epoxy nish for corrosive atmospheres.

• Disconnect switch.

MAXIMUM RECOMMENDED MOUNTING

HEIGHT

3 - 10 KW 9 FT. 12 - 15 KW 10 FT. 20 - 30 KW 13 FT. 40 - 48 KW 16 FT.

Product Dimensions & Model Number Designation

motors with unit bearings on 3 KW - 10 KW models and sleeve bearings on 12.5 KW - 48 KW models - mounted with rubber insulators to minimize vibration and noise. Fan assembly enclosed by a heavy gauge, close spaced, chrome plated wire guard.

LOUVER ASSEMBLY:

Louvers are individually adjustable for directional control of air ow and the entire assembly can be repositioned in the eld from down ow to up ow or left / right directional air ow.

TEMPERATURE CONTROLS: 20 KW through 48 KW units and all 480V have built in 24 Volt transformer for low voltage remote thermostat application. 25 KW through 48 KW models available in 2-stage on special order (consult factory). INSTALLATION: Unit Heaters can be mounted with the motor shaft from horizontal to downward at 45° off horizontal. Pre-drilled holes and installed threaded nuts provided to allow hanging by threaded rods - 1/4” for units up to 15 KW and 5/16” for 20 KW units and larger. Optional wall / ceiling mounting brackets are available for all units.

3.3 KW THROUGH 15 KW UNIT HEATERS 20 KW THROUGH 48 KW UNIT HEATERS

Figures 3 & 4 shown with standard mounting tabs for units over 20 KW. Optional UHB-3 and UHB-4 wall brackets are available. 3.3 KW

thru 15 KW units can be mounted using 1/4” threaded rod. 20 KW thru 48 KW units can be mounted using 5/16” threaded rod.

Element Volts F = 208 H = 240 HF = 240/208 G = 277 P = 480

Factory Installed Options (use as a suffix on model designation): S = Summer Fan Switch, F = Fan Delay, D = Disconnect, T = Built-in Thermostat, E = Epoxy Coated

Field Installed Options: Disconnect Switch, Built-in Thermostat, & Wall / Ceiling Bracket

Phase 1 = 1-Phase 2 = 1 or 3-Ph. 3 = 3-Phase

H 2 H UH 10 C A 1

Motor Voltage F = 208 H = 240 B = 240 / 208 G = 277 P = 480

Model Series UH

Element KW

Control System O = None C = Contactor R = Relay

Dimensions A B C

Figure 1:

3.3, 5, 7.5, 10 KW

Figure 2:

12.5, 15 KW

Figure 3:

20, 25, 30 KW

Figure 4:

40, 48 KW

Transformer O = None A = Included

20” 11” 13”

22” 11” 15”

24” 17” 17”

26” 23” 19”

Control Volts 1 = 24 2 = 120 3 = Element Voltage 4 = 240

Page 13

UH Series Horizontal Fan Forced Unit Heater

Standard Product Models

UPC#

686334 644600 F1FUH03003 644662 H1HUH03003 240 1 13.8 240 644723 G1GUH03003 277 1 11.9 277 711487 H3HUH03C03 240 3 7.9 240 711494 F3FUH03C03 208 3 9.2 208 711401 P3PUH03CA1 480 3 4 24 883 644617 F1FUH05003 644679 H1HUH05003 240 1 20.8 240 644730 G1GUH05003 277 1 18.1 277 644938 F2FUH05C03 208 1 or 3 24.1 / 14.0 208

644884 P3PUH05CA1 480 3 6.1 24 958 718059 F1FUH07CA1 717373 H1HUH07CA1 240 1 31.3 24 41 715188 G1GUH07CA1 277 1 27.1 24 41 644792 F3FUH07C03 208 3 20.8 208 644952 H2HUH07C03 240 1 or 3 31.3 / 18.1 240 644891 P3PUH07CA1 480 3 9.1 24 1204 717090 F1FUH10CA1 680844 H1HUH10CA1 240 1 41.7 24 717380 G1GUH10CA1 277 1 36.1 24 644969 F2FUH10C03 208 1 or 3 48.1 / 27.8 208

644976 HF2BUH10C03 10 / 7.5

711425 P3PUH10CA1 10.0 34100 480 3 12.1 24 55 51 1275 644648 F1FUH12C03 644709 H1HUH12C03 240 1 52.1 240 644815 F3FUH12C03 208 3 34.7 208 644860 H3HUH12C03 240 3 30.1 240 711432 P3PUH12CA1 480 3 15.1 24 2060 644655 F1FUH15CO3 644716 H1HUH15C03 240 1 62.5 240 644822 F3FUH15C03 208 3 41.7 208 644877 H3HUH15C03 240 3 36.1 240 711449 P3PUH15CA1 480 3 18.1 24 2266 688307 F1FUH20CA1 688420 H1HUH20CA1 240 1 83.3 24 688314 F3FUH20CA1 208 3 55.6 24 688437 H3HUH20CA1 240 3 48.2 24 688321 P3PUH20CA1 480 3 24.1 24 688444 F1FUH25CA1 688338 H1HUH25CA1 240 1 104.2 24 688451 F3FUH25CA1 208 3 69.5 24 688345 H3HUH25CA1 240 3 60.2 24 688468 P3PUH25CA1 480 3 30.1 24 688475 H1HUH30CA1 688369 F3FUH30CA1 208 3 83.4 24 688482 H3HUH30CA1 240 3 72.3 24 688376 P3PUH30CA1 480 3 36.1 24 688406 P3PUH40CA1 40.0 136500 480 3 48.2 24 55 56’ 2275 16’ 75 5216 688789 P3PUH48CA1 48.0 163800 480 3 57.8 24 67 56’ 2275 16’ 78 6512

MODEL KW BTU’S VOLTS PH AMPS

208 1 15.9 208

3.3 11200

208 1 24.1 208

5 17100

208 1 36.1 24

7.5 25600

208 1 48.1 24

10.0 34100

34100 240 1 or 3 41.7 / 24.1 240 55 25600 208 1 or 3 36.1 / 20.8 208 42

208 1 60.1 208

12.5 42600

208 1 72.1 208

15.0 51200

208 1 96.2 24

20.0 68300

208 1 120.2 24

25.0 85300

240 1 125 24

30.0 102390

CONTROL

VOLTS

TEMP

RISE °F

26 26’ 400 9’ 36

40 26’ 400 9’

42 36’ 575 9’

49 45’ 800 10’ 45

59 45’ 800 10’ 54

47 56’ 1350 13’ 55 2991

58 56’ 1350 13’ 55 3525

70 56’ 1350 13’ 60 4081

AIR

THROW

CFM

MOUNTING HT.

36’ 575 9’

RECOM’D

WT.

(LBS.)

44644945 H2HUH05C03 240 1 or 3 20.8 / 12.1 240

LIST

693

724

1116

1230

1980

2179

Factory & Field Installed Accessories

SUFFIX DESCRIPTION

S Summer fan switch 58

CA1 24v Transformer (3.3 KW - 15 KW units) & Contactor CA2 120v Transformer (3.3 KW - 15 KW units) & Contactor

E Epoxy Coating 111 T SPST Thermostat 67

FACTORY INSTALLED OPTIONS

Heat purge fan delay switch for 208 / 240 / 277V units

(includes contactor & transformer)

Heat purge fan delay switch for 480V units

(contactor & transformer standard in unit)

Disconnect Switch - 30 Amps 281

Disconnect Switch - 40 Amps 322

Disconnect Switch - 80 Amps 405

Disconnect Switch - 100 Amps 411

LIST

201

117

147

FIELD INSTALLED ACCESSORIES

UPC

686334

646239 DCS303 30 Amp Disconnect Kit 240

646246 DCS403 40 Amp Disconnect Kit 282

646253 DCS803 80 Amp Disconnect Kit 370

646260 DCS1003 100 Amp Disconnect Kit

687997 TUH1 25 Amp SPST Thermostat Kit 67

699105 UHB-1 wall / ceiling bracket - 3.3 KW - 15 KW units 99

699112 UHB-3 wall / ceiling bracket - 20 KW - 30 KW units 112

699129 UHB-4 wall / ceiling bracket - 35 KW - 48 KW units 142

MODEL DESCRIPTION LIST

NOTE: Factory installed heat purge fan delay option (F) requires unit to have CA1 or CA2 factory installed

373

Page 14

5100 Series Horizontal or Vertical Mounted Fan Forced Unit Heater

3.3 KW THROUGH 50 KW SUSPENDED FAN FORCED UNIT HEATERS AVAILABLE IN 1 OR 3 PHASE FOR ALL STANDARD VOLTAGES FROM 208V TO 480V THAT CAN BE MOUNTED TO PROVIDE HORIZONTAL OR VERTICAL DISCHARGE.

CONSTRUCTION:

Heavy 18 gauge welded steel cabinet with powder coated nish and control compartment housing

a master terminal board with a hinged and latched access door, simplifying wiring, installation & maintenance.

Taskmaster Dimensions

RATING

3.3 - 5.0 17 3/4 14 15/32 6 1/2

7.5 - 10.0 24 5/16 21 1/2 6 1/2

15.0 - 20.0 28 11/16 21 1/2 6 1/2

25.0 - 50.0 34 29 1/4 10 1/16

DIMENSIONS (inches)

H W D

Horizontal Discharge

HEATING ELEMENT:

Copper clad steel sheath element

with continuously brazed steel ns

formed to allow side draw through

air ow.

OVERHEAT PROTECTION:

All units come equipped with automatic reset type limit controls to de-energize the heater should an over-temperature situation occur.

FAN and MOTOR:

Totally enclosed, 1-speed, 1-phase, permanently lubricated, thermally protected motors with unit bearings on 3 KW - 20 KW models. Totally enclosed, 2-speed, 1-phase, permanently lubricated, thermally protected motors with sleeve bearings on 25 KW - 50 KW models. All motors mounted with rubber insulators to minimize vibration & noise. Fan over-ride purges unit of residual heat at shutdown.

LOUVER ASSEMBLY:

Louvers are individually adjustable for directional control of air ow up to 15° from straight

Vertical Discharge

Manufactured in U.S.A.

FIELD INSTALLED OPTIONS:

• In-unit or wall mounted

temperature control thermostats

horizontal. Optional diffusers available for down ow (vertical discharge) applications.

TEMPERATURE CONTROLS:

Optional low voltage and line voltage thermostats available with an adjustable temperature range of 40°F to 90°F. Units with model numbers ending in CA1 are factory wired for low voltage controls. 25 KW through 50 KW units are designed for two stage heating operation.

low or line voltage.

• Summer fan switch to operate

the fan only.

• Power disconnect switch.

• Heat stratication thermostat.

INSTALLATION:

Unit Heaters can be mounted for horizontal or vertical discharge. Applications up to 6000 Ft. See UH Series above 6000 Ft. ABS (American Bureau of Shipping) type approved.

Installing the Taskmaster Series

DETERMINING HEATER REQUIREMENTS

Calculate the heating loads using the NEMA handbook or ASHRAE guide. Then determine the quantity and

size of unit heaters to be used. To maintain uniform heat and reduce stratied air, it is recommended that the

total CFM of the units turn the air over approximately 3 times per hour. In instances where a large group of people are located and normally in the same area, use a large number of lower KW unit heaters. In warehouse areas or storage rooms where heat distribution and constant temperatures are less important, use fewer heaters of higher capacity.

HORIZONTAL MOUNT

Small rooms can be heated by one unit heater. Where two walls are exposed, heaters should be mounted as

shown in Figure A. In larger rooms, units should he located so their air streams wipe exposed walls without blowing at them. Units should be located so that the air stream of one supports that of another thus setting up a circulatory air movement shown in published air throw.) Units should not be mounted horizontally in areas having ceiling heights in excess of 15-18 ft.

Figure

B. (Distance between units to be approximately 1-1/2 times

VERTICAL MOUNT

Units should be mounted vertically in high bay areas, or where heater location would not interfere with plant

operation or trafc, Heaters should be situated to provide free air circulation. Size and selection of units should

be based on recommended mounting height. Optional diffusers may best be employed to reduce high air velocity and at the same time disperse heated air in a uniform pattern. When unit heaters are used to combat cold air inrush from opened loading dock doors, one or more units should be arranged to blow warm air across opening (Figure C).

DUAL MOUNTING

Where square footage is large and comfort essential, both horizontal and vertical installations may best serve

your requirements as Figure D demonstrates.

Note: Products in this section with factory installed controls are subject to 100% cancellation/restocking charges.

Page 15

HOW TO DESIGNATE A MODEL:

5100 Series Horizontal or Vertical Mounted Fan Forced Unit Heater

Diffuser Options

DESCRIPTION

Louver Diffuser (Standard). Louvers can

be individually adjusted for rectangular

coverage over doorways as an air curtain,

or to meet rectangular oor pattern heating

General Distribution (No Diffuser). The

5100 air chute venturi permits general down

ow air pattern distribution as required at a

Anemostat Diffuser (Optional). For

applications where draft restriction is

required at lower unit mounting heights.

Radial Diffuser (Optional). Individually

adjustable ns permit increased oor

coverage at 45° open. Additional throw is

accomplished when ns are 90° vertical.

(Please allow for higher mounting heights.)

requirements.

higher mounting height.

UPC#

686334

692687 681186 681186 722070

692663 692663 692670 692670 722087

MODEL

NUMBER

NA Standard

Not

Required

AD5120 AD5150 AD5150 AD5175

RD5120 RD5120 RD5150 RD5150 RD5175

KW USED

3.3-5

7.5-10 25-30 40-50

3.3-5

7.5-10 25-30 40-50

7.5-10 25-30 40-50 60-70

7.5-20

25-50

60-70

MAX MOUNTING

HEIGHT (ft.)

9 12 18 22 24

15 17 20 31

45° 90° 45° 90°

10 14 20 18 26

14 21 30 28 36

DIMENSION

A (feet)

36 42 62 68 72

20 40 52 75 84

15 30 40 55 64

38 50 60

DIMENSION

B (feet)

10 22 30 42 47

NA NA NA

30 35 44 54 60

WT.

LIST

(lbs.)

NA NA

10 372

12 555

37 598

12 412

14 481

39 519

Description 1 Description 2 Description 3

Louver Diffuser

No Diffuser Anemostat Diffuser

Mounting Brackets & Model Designator

(*Included with A5100 bracket.)

Not actual colors. Red & yellow shading is for diagram clarity only.

HF 2 B 51 10 C A 1

Description 4

Radial Diffuser

MOUNTING BRACKETS

UPC#

686334

692694 A5105 3.3 KW TO 5.0 KW 9 lbs. 96 692700 A5120 7.5 KW TO 20.0 KW 13 lbs. 11 7 692717 A5150 25.0 KW TO 50.0 KW 16 lbs. 131 688628 B5105* 3.3 KW TO 20.0 KW 3 lbs. 52 688635 B5150* 25.0 KW TO 50.0 KW 8 lbs. 77 692847 V5105 3.3 KW TO 5.0 KW 9 lbs. 183 692854 V5120 7.5 KW TO 20.0 KW 13 lbs. 224 692861 V5150 25.0 KW TO 50.0 KW 16 lbs. 236

692878 DS5105 3.3 KW TO 5.0 KW 3 lbs. 33 692885 DS5120 7.5 KW TO 20.0 KW 4 lbs. 38 681223 DS5150 25.0 KW TO 50.0 KW 5 lbs. 40

706544 OFG5101 3.3 KW TO 5.0 KW 3 lbs. 53 706551 OFG5102 7.5 KW TO 20.0 KW 4 lbs. 58 706568 OFG5103 25.0 KW TO 50.0 KW 5 lbs. 66

MODEL MODEL SIZE WT.

DUST SHIELD

FAN GUARD

LIST

Element Volts F = 208 H = 240 HF = 240/208 G = 277 P = 480

Phase 1 = 1-Phase 2 = 1 or 3-Ph. 3 = 3-Phase

Motor Voltage F = 208 H = 240 B = 240 / 208 G = 277 P = 480

Model Series 51

Element KW Control System

Blank = None C = Contactor

Transformer Blank = None A = Included

Control Volts 1 = 24 2 = 120 (with CA option)

Page 16

5100 Series Horizontal or Vertical Mounted Fan Forced Unit Heater

Standard Taskmaster Models & Series Notes

UPC#

686334

645089 F1F5103N 3.3 11.2 208 1 15.9 208 645102 HF1B5103N 3.3/2.5 11.2 / 8.5 240/208 1 13.7 / 11.9 240 / 208 645683 F2F5103N 3.3 11.2 208 1 / 3 11.9 / 6.9 208

645706 HF2B5103N 3.3/2.5 11.2 / 8.5 240/208

645720 G1G5103N 645126 P3P5103CA1N 480 3 4.0 24 883 645546 F1F5105N 5.0 17.1 208 1 24.1 208 645560 HF1B5105N 5.0/3.7 17.1 / 12.8 240/208 1 20.9 / 18.1 240 / 208

645140 F2F5105N 5.0 17.1 208

645164 HF2B5105N

645843 G1G5105N 5.0 17.1 277 645188 P3P5105CA1N 5.0 17.1 480 3 6.1 24 958 645201 F2F5107CA1L 7.5 25.6 208 1 / 3 36.1 / 20.8

645928 G1G5107CA1L 7.5 25.6 277 1 27.1 645249 P3P5107CA1N 7.5 25.6 480 3 9.1 1204 645263 F2F5110CA1L 9.9 33.8 208 1 / 3 47.8 / 27.4

645287 HF2B5110CA1L

645645 G1G5110CA1N 10.0 34.1 277 1 36.1 645300 P3P5110CA1N 10.0 34.1 480 3 12.1 1275 645324 F3F5115CA1L 15.0 51.2 208 3 41.7 645348 HF3B5115CA1L 15.0/11.2 51.2 / 38.4 240/208 3 36.1 / 31.3 43°F 32’ 11’ 20’ 645362 P3P5115CA1N 15.0 51.2 480 3 18.1 2060 645386 HF3B5120CA1L 19.7/14.8 67.2 / 50.5 240/208 3 47.8 / 41.1 645409 P3P5120CA1N 20.0 68.3 480 3 24.1 645881 F3F5125CA1L 25.0 85.3 208 3 69.5

645980 P3P5125CA1N 25.0 85.3 480 3 30.1 645423 F3F5130CA1L 30.0 102.4 208 3 83.4

645461 P3P5130CA1N 30.0 102.4 480 3 36.2 644044 F3F5140CA1L 40.0 136.5 208 3 111. 2

644082 P3P5140CA1N 39.0 133.1 480 3 47.0 645485 F3F5150CA1L 49.6 169.3 208 3 139.0

645522 P3P5150CA1N 50.0 170.6 480 3 60.3

MODEL KW BTU / H VOLTS PH AMPS

1 / 3 13.7 / 11.9

3.3 11.2

5.0 17.1 240

3.7 12.8 208

7.5 25.6 240 1 / 3 27.1 / 31.3

5.6 19.2 208 1 / 3 31.3 / 27.1

10.0 34.1 240 1 / 3 41.2 / 24.0

7.5 25.6 208 1 / 3 36.1 / 20.8

277 1 11.9 277

3 7.9 / 6.9

1 / 3 24.1

20.8 / 18.1 240

1 / 3

12.1 / 10.4 208

1 / 3

CONTROL

VOLTAGE

240 / 208

13.9

18.1 277

208

TEMP

RISE

26oF 12’ 400 9’ 9’ 25

40oF 12’ 400 9’ 9’

34°F 22’ 700 10’ 12’ 54

45°F 22’ 700 10’ 14’ 55

57°F 32’ 1100 12’ 18’ 65 2719

AIR

THROW

CFM

1100 64

2000/1800 3204645942 HF3B5125CA1L 25.0/18.7 85.3 / 64.0 240/208 3 60.2 / 52.1 40/44°F 45’ 12’ 22’ 120

2000/1800 3709645447 HF3B5130CA1L 30.0/22.5 102.4 / 76.8 240/208 3 72.3 / 62.5 47/53°F 40’ 12’ 20’ 120

RECOMMENDED

MOUNTING HT.

Horizontal Vertical

WT.

(LBS.)

LIST

693

724

1116645225 HF2B5107CA1L

1230

1980

4742644068 HF3B5140CA1L 40.0/30.0 136.5/102.4 240/208 3 96.4 / 83.4 40/45°F 55’ 3100/2800 15’ 24’ 120

5920645508 HF3B5150CA1L 50.0/37.5 170.6/128.0 240/208 3 120.5/104.3 51/56°F 50’ 3100/2800 15’ 22’ 120

International Models

UPC#

686334

715300 Q3H5103CA1 724920 R3H5103CA1 415 4.6 883 724937 Q3H5105CA1 424944 R3H5105CA1 415 6.96 958 717137 Q3H5107CA1 724951 R3H5107CA1 415 10.5 1204 686570 Q3H5110CA1 724968 R3H5110CA1 415 13.9 1275 724975 Q3H5115CA1 724982 R3H5115CA1 415 20.9 2066 704175 Q3H5120CA1 724999 R3H5120CA1 415 27.85 719193 Q3H5125CA1 710619 R3H5125CA1 415 34.8 725002 Q3H5130CA1 710626 R3H5130CA1 415 41.8 725019 Q3H5140CA1 709835 R3H5140CA1 415 55.7

MODEL KW BTU/H VOLTS PH AMPS

3.3 11263

5.0 17065

7.5 25600

10.0 34130

15.0 51195

20.0 68260

25.0 85325

30.0 102390

40.0 136520

380

380 7.6

380 11.4

380 15.2

380 22.8

380 30.4

380 38.0

380 45.6

380 60.85

CONTROL

VOLTAGE

5.02

TEMP

RISE

40/44 45’

47/53 40’ 12’ 20’ 3709

40/45 55’ 3100/2800 15’ 24’ 4742

AIR

THROW

12’ 400 9’ 9’

40 27

22’ 700

45 10’ 14’ 55

32’ 1100

57 12’ 18’ 65 2719

CFM

2000/1800

• For 24V control add “CA1” sufx and $101 list. • For 120V control add “CA2” sufx and $101 list.

• For other voltages consult factory.

NOTES:

• 25-50KW models are wired for single or two stage heating and have two speed motors.

• Air delivery and motor data on dual voltage units reect higher voltage.

• 600 Volt models available in 5 KW through 30 KW. Contact factory for delivery.

• Supply wire on 40 and 50 KW models should have rated insulation of 75oC minimum.

• Use T5122 for two stage control.

• Use TW123 for two stage control.

• Use TFS5102 for two stage control.

• Wall thermostat must be used when built-in stratication thermostat is required.

RECOMMENDED

MOUNTING HT.

Horizontal Vertical

10’ 12’ 54

11’ 20’ 64

12’ 22’

WT.

(LBS.)

120

LIST

693

724

1116

1230

1980

3204

Page 17

5100 Series Horizontal or Vertical Mounted Fan Forced Unit Heater

Recommended Control Options, Control Accessory Options, & Control Accessories

DISCONNECT

MODEL

F1F5103N

HF1B5103N

F2F5103N

HF2B5103N

G1G5103N DCS 202 NA

P3P5103CA1N NA DCS 403 A6176 FS5102 FSW5112 TFS5101 TC5102 NA

F1F5105N

HF1B5105N ET5SS

F2F5105N

HF2B5105N

G1G5105N DCS 202 NA

P3P5105CA1N NA DCS 403

F2F5107CA1L

HF2B5107CA1L

G1G5107CA1L DCS 403 NA NA

P3P5107CA1L NA DCS 403 FS5102 FSW5112 TC5102 NA

F2F5110CA1L

HF2B5110CA1L

G1G5110CA1N DCS 403 NA NA

P3P5110CA1N

F3F5115CA1L DCS 603

HF3B5115CA1L DCS 403

P3P5115CA1L DCS 403 FS5102 FSW5112 NA

HF3B5120CA1L DCS 603 FS5101 FSW5111 TC1602

P3P5120CA1N DCS 403 FS5102 FSW5112 NA

F3F5125CA1L

HF3B5125CA1L

P3P5125CA1N DCS 403 FS5102 FSW5112 NA

F3F5130CA1L DCS 1003

HF3B5130CA1L DCS 1003

P3P5130CA1N DCS 403 FS5102 FSW5112 NA

F3F5140CA1L NA

HF3B5140CA1L DCS 403

P3P5140CA1N DCS 603 FS5102 FSW5112 NA

F3F5150CA1L

HF3B5150CA1L

P3P5150CA1N DCS 1003 FS5102 FSW5112 NA

CONTROL ACCESSORY OPTIONS - FIELD INSTALLED IN HEATER

UPC#

686334

717151 DCS202 / 5100 2 POLE; 20 AMP; 120-277 V.A.C. 134 717168 DCS403 / 5100 3 POLE; 40 AMP; 120-600 V.A.C. 303 717175 DCS603 / 5100 3 POLE; 60 AMP; 120-600 V.A.C. 442 717182 DCS1003 /5100 3 POLE; 100 AMP; 120-600 V.A.C. 497

692779 T5100 SPST; LINE DUTY 25 AMP 120-277V 121

692786 T5102 DPST; LINE DUTY 25 AMP 120-277V 164

692779 T5100

692793 T5122

692809 TC5102

692816 TC5103

692823 FS5101 SPST; LINE VOLT ;120-277V 69 692830 FS5102 SPST; LINE VOLT ; 480-600V 100

MODEL DESCRIPTION LIST

LINE VOLTAGE THERMOSTAT (45 - 90 oF)

LOW VOLTAGE THERMOSTAT (ALL CA1 MODELS) (45 - 90 oF)

SWITCH

1 Ø 3 Ø IN-BUILT

DCS 202 NA T5100 ET5SS

NA DCS 403 T5102 TW 1512

DCS 202 NA T5100 ET 5SS

NA DCS 403 T5102 TW 1512

DCS 403 NA

NA DCS 403 T5102 TW 1512

DCS 403 NA T5100 ET5SS

NA DCS 403 T5102 TW 1512

DCS 403 NA

NA DCS 403

DCS 403 NA

NA DCS 403

DCS 603 NA

NA DCS 403

DCS 603 NA

NA DCS 403

DCS 403 FS5102 FSW5112

DCS 1003

NA FS5101 FSW5111 TC1602

POWER DISCONNECT SWITCH

SPST; LOW VOLT/PILOT DUTY; 125VA;

(3.3-20 KW UNITS)

2-STAGE; LOW VOLT; 125VA; (25-50

STRATIFICATION THERMOSTAT

SPST; LOW VOLT/PILOT DUTY (W/

RELAY) ; 70-130

SPST; LINE DUTY; AMP 120-240V; 70-

SUMMER FAN SWITCH

THERMOSTAT SUMMER FAN SWITCH

T5100

KW UNITS)

130

WALL

MOUNTED

ET5SS NA

S2025

S2025 NA

A6176

TW123

IN-BUILT

FS5101 FSW5111 NA

FS5102 FSW5112

FS5101 FSW5111

FS5101 FSW5111 TC1602

FS5101 FSW5111

FS5101 FSW5111 TC1602

UPC#

686334

502917

538787 ET5SS SP; 22 Amp; 120-277V; 50-90OF 27.30

691093 *TW1512 DPST; 25 AMP; 120-277V; 50-90oF 196

260008 A6176 SPST; (3.3 - 20 KW UNITS); 50-90OF 104 691116 TW123 2-STAGE; (25 - 50 KW UNITS); 40-90OF 200

691109 TC1602 SPST; LINE VOLT; 120-277V; 70-140

121

180

692625 FSW5111 SPST; LINE VOLT; 120-277V 86

692632 FSW5112 SPST; LOW VOLT; (W/RELAY) 186

184

692649 TFS5101 SPST; LOW VOLT; 50-90

123

692656 TFS5102 2-STAGE; LOW VOLT; 50-90

**Any SPST thermostat of sufcient amperage may be substituted.

*Use DPST thermostat for 3-phase line voltage control in non “C” models.

WALL

MOUNTED

CONTROL ACCESSORIES - REMOTE WALL MOUNTED

MODEL DESCRIPTION LIST

S2025H10AA SP; 25 Amp; 120-277Vl; 50-90OF 51

LOW VOLTAGE THERMOSTAT (ALL CA1 MODELS)

LOW VOLTAGE T’STAT & SUMMER FAN SWITCH(W/RELAY)

THERMOSTAT &

SUMMER FAN

SWITCH

WALL MOUNTED

TFS5101

LINE VOLTAGE THERMOSTAT

STRATIFCATION THERMOSTAT

SUMMER FAN SWITCH

(CA1 MODELS)

STRATIFICATION

IN-BUILT

TC5103

TC5102 NA

TC5103

THERMOSTAT

WALL

MOUNTED

TC1602

197

200 401

Page 18

COM

001-0102

C2 C3

POWER

REV.1

JUNE 99

200

100

TEST

3 5 6

DELAY(s)

150

RATIO(%)

4MA-O%HEAT

20MA-100%HEAT

0-10VDC-CONTROL

OR C1025 WALL

THERMOSTAT

3 OR 4 STAGE

STEP CONTROL

INPUT

CONTROL

12030

VR1

VR2

+ _

5100 Series 60 KW - 100 KW Suspended Fan Forced Unit Heater

Features & Specications

CONSTRUCTION:

Heavy gauge steel cabinet with powder coated nish and control compartment

housing a master terminal board. The control compartment allows for access through a hinged and latched door, simplifying wiring, installation, and maintenance.

HEATING ELEMENT:

The heating element is a copper clad steel sheath element with continuously brazed steel

ns formed to allow side draw through air ow.

OVERHEAT PROTECTION:

All units come equipped with manual reset type limit controls to de-energize the heater should an over-temperature situation occur.

FAN & MOTOR:

Single speed, single phase permanently lubricated, thermally protected motors with ball bearings. The fan override purges the unit of residual heat at shutdown.

FIELD INSTALLED OPTIONS:

Summer fan switch to operate the fan only, and a heat stratication thermostat for high

bay areas.

HEATER STAGING:

60 KW and 70 KW are three stage; 80 KW, 90 KW, & 100 KW are four stage.

SC5100 FACTORY INSTALLED ELECTRONIC STEP CONTROLLER:

The optional factory installed step controller is a rst on last off sequencer that will cycle

the unit heater stages through an optional wall thermostat. Additionally, the step controller

can be controlled by any building management system with 4 to 20 MA or 0 - 10 VDC eld

Manufactured in U.S.A.

supplied control signal.

Optional Factory Installed Electronic Step Controller

Dimensions

Dimensions (Inches)

KW H W D

60-70 35 1/2 30 1/2 14 1/2 141

80-100 39 1/2 37 5/8 18 1/2 202

(LBS.)

Mounting Brackets and Accessories

UPC#

686334

7220002 A5175 60 To 70

7220102 A51100 80 to 100 189

Model Heater KW Description LIST

7220302 B5175 60 to 70

7220402 B51100 80 to 100 101

7220202 V51100 60 to 100 Vertical Bracket 314

Wall / Ceiling Bracket

7220502 DS5175 60 to 70

7220602 DS51100 80 to 100 57

7220902 OFG 5175 60 to 70

7221002 OFG 51100 80 to 100 97

Mounting Brackets

Wall/Ceiling Bracket

Heater Bracket

Dust Shield

Fan Guard

181

Page 19

5100 Series 60 KW - 100 KW Suspended Fan Forced Unit Heater

Electrical Data

UPC#

686334

Catalog Number KW

BTU/HR

(x 1000)

Voltage Phase Control Voltage Amps / Phase

Branch Circuit

Protection Size

LIST

721349 F3F5160CA1 60 204.7 208

3 24

721363 P3P5160CA1 60 204.7 480 72.3 100

721424 F3F5170CA1 70 238.9 208

3 24

721448 P3P5170CA1 70 238.9 480 84.3 110

721707 HF3B5180CA1 80/60 273/204.7 240/208

3 24

721714 P3P5180CA1 80 273 480 96.3 125

721769 HF3B5190CA1 90/67.5 307.1/230.4 240/208

3 24

721776 P3P5190CA1 90 307.1 480 108.4 150

721820 HF3B51100CA1 100/75 341.3/256 240/208

3 24

721837 P3P51100CA1 100 341.3 480 120.4 175

166.7 225

194.4 250

192.8/166.7 250/225

216.9/187.5 300/250

241/208.3 350/300

Air Delivery Data

UPC#

686334

721349 F3F5160CA1

721356 HF3B5160CA1 60/45

721363 P3P5160CA1 60

721424 F3F5170CA1 70

721431 HF3B5170CA1 70/53

721448 P3P5170CA1 70

721707 HF3B5180CA1

721714 P3P5180CA1 55

721769 HF3B5190CA1 61/46

721776 P3P5190CA1 61

721820 HF3B51100CA1 68/51

721837 P3P51100CA1 68

Catalog Number CFM at Outlet FPM at Outlet

3400 1485

5000 1529

Temp Rise

°F

55/41

HP Motor RPM Air Throw

1/3 1100 50’ 18’ 31’

3/4 1100 65’ 22’ 40’

Max Mounting

Horizontal Vertical

8135721356 HF3B5160CA1 60/45 204.7/153.6 240/208 144.6/125 200/175

8480721431 HF3B5170CA1 70/52.5 238.9/179.2 240/208 168.7/145.8 225/200

9912

10312

10886

Recommended Control Options

UPC#

686334

721349 F3F5160CA1

721356 HF3B5160CA1 FS5101

721363 P3P5160CA1 FS5102 104

721424 F3F5170CA1 FS5101

721431 HF3B5170CA1 FS5101

721448 P3P5170CA1 FS5102 104

721707 HF3B5180CA1 FS5101 71

721714 P3P5180CA1 FS5102 104

721769 HF3B5190CA1 FS5101 71

721776 P3P5190CA1 FS5102 104

721820 HF3B51100CA1 FS5101 71

721837 P3P51100CA1 FS5102 104

Catalog Number

Step Controller Thermostat

Model List Model List Model List Model List Model List Model List

SC5100 654 C1025 194 FSW5112 186

Note: Products listed in this section are custom built and subject to 100% cancellation/restocking charges.

Summer Fan Switch Stratication Thermostat

Wall Built-In Wall Built-In

FS5101

TFS5101 200 TC5102 184

Page 20

2600 Series Downow Unit Heater

General Description & Diffuser Information

CONSTRUCTION:

• 16 gauge steel cabinet with epoxy powder coated nish and control compartment with a hinged and

latched access door.

• OSHA guards standard with all models.

HEATING ELEMENT:

• Corrosion resistant element with steel sheath and steel spiral ns.

OVERHEAT PROTECTION:

• All units come equipped with manual reset limit controls to de-energize the heater should an over-temperature situation occur.

FAN and MOTOR:

• Totally enclosed, 1 speed, 1 phase permanently lubricated, thermally protected motors with unit bearings on 3KW - 20KW models. Totally enclosed, 2 speed, 1 phase permanently lubricated, thermally protected motors with sleeve bearings on 24KW - 50KW models.

• Axial ow fan blade - 1570 RPM max.

• All models equipped with fan purge which allows fan to operate after elements are de-energized to purge residual heat.

TEMPERATURE CONTROLS:

• 208V, 240V, 277V and 480V units have In-Built 24 Volt transformer for low voltage remote thermostat application.

• 600V units have In-Built 240V control on 5-20 KW models, 25-50 KW models have 24V control.

• 25 KW - 50 KW models may operate as 2 stage heaters if 2 stage remote thermostat is used.

DISCONNECT SWITCH:

• All models equipped with In-Built disconnect except F3F2640, F3F2650 and H3H2650.

INSTALLATION:

• Unit can be mounted using optional mounting bracket or eld constructed angle iron bracket.

• Not recommended for mounting with threaded rod or chain.

Standard Heater Anemostat DiffuserRadial Louvered Cone Diffuser Linear Louvered Diffuser

Manufactured in U.S.A.

2600 Series shown with

standard wire guard.

Diffusers are eld installed.

Dimensions**

20 1/2”

5-20

25-50

For general distribution.

Choice of other diffusers

may be added after

installation if required.

O.S.H.A guard for

fan blade D1604 for

2605-2620, & D1614 for

2625-2650 Do not use

Diffuser Descriptions

MODEL

2605 2607 2610 2615 2620 2625 2630 2640 2650

*Minimum mounting height 6 feet. **Dimensions are for all heater models without a diffuser option. Adding a diffuser will change the vertical (”A”) dimension of heater. All mounting distances are in feet. All diagrams show optional mounting bracket.

with other diffusers.

MAX

MOUNTING

HEIGHT*

10 10 22 20 18 32 30 26 24

(ft.)

25 25 40 44 48 48 60 64 68

15”

21 1/2”

27”

MODEL MODEL MODELDIM: A DIM: A DIM: ADIM: B DIM: B DIM: B

D1600

D1610

With vanes vertical, straightens air for higher

mounting. Closed position for broad horizontal

VERTICAL 45 DEGREES OPEN

MAX

MOUNTING

HEIGHT

15 15 26 24 22 38 36 32 28

5-20

25-50

coverage. Adjustable for intermediate

(ft.)

25 25 36 38 40 42 50 50 50

requirements.

MOUNTING

6 1/2"

11 1/2"

MAX

HEIGHT

8 15 14 13 24 22 20 18

14 1/4"

24 3/4"

(ft.)

30 30 44 46 50 70 74 78 82

D1602

D1612

MOUNTING

5-20

25-50

Affords more precise directional

throw where heaters cannot be

mounted directly over area to be

heated or for heating long narrow

MAX

HEIGHT

10 10 22 20 18 34 32 30 28

areas.

(ft.)

10 10 14 14 15 30 34 36 40

16 1/4"

22 1/4"

(ft.)

40 40 54 60 66 80 80 90

100

D1603

D1613

5-20

19 1/4"

9 3/4"

25-50

Blends room air with

heated air for widespread

distribution without

excessive drafts.

MAX

MOUNTING

HEIGHT

9 20 18 16 30 28 26 24

29 3/4"

(ft.)

25 25 38 40 42 60 64 67 70

Page 21

2600 Series Downow Unit Heater

Product Specications

SPECIFICATIONS: The contractor shall furnish and install the 2600 Series electric vertical discharge unit heaters of the size, capacity and

voltage specied. Heaters shall be installed according to the manufacturer’s recommendations and applicable national and local codes.

ELEMENTS: Elements shall consist of Nickel Chromium alloy resistance wire embedded and completely surrounded in Magnesium Oxide,

enclosed and swagged into corrosion resistant sheaths. Corrosion resistant steel ns shall be permanently attached to the sheaths to provide

maximum heat transfer to the air stream.

MOTORS: Motors shall be single phase, resilient mounted, totally enclosed, industrial rated with an automatic reset thermal overload protective device. Motors on heaters up to 20 KW capacity shall be permanently lubricated shaded pole type. Over 20 KW, motors shall be permanent split capacitor type. Motors shall be mounted out of the main air stream in such a manner as to allow ambient air to be drawn over the motor to reduce motor temperature. Motor shall be separately removable from beneath the heater without removing the entire heater from mounting bracket.

FAN BLADES: Fan blades shall be heavy-duty individually balanced axial ow type. Fan speed shall not exceed 1570 RPM.

THERMAL OVERLOAD PROTECTION: All heaters shall be equipped with a manual reset thermal cutout which disconnects elements and

motor in the event normal operating temperatures are exceeded.

WIRING: Heaters shall be designed for a single supply circuit with elements, motor and control circuits subdivided and fused to conform with the latest National Electric Code and OSHA requirements. All three phase heaters shall have balanced phases.

CONTROLS: Heaters shall be controlled by a low voltage wall mounted thermostat. All heaters 25 KW and larger shall be wired for 2 stage operation. 5 KW through 20 KW units are single stage. All heaters shall be equipped with a fan safety device that causes fan to operate after elements are de-energized to purge unit of residual heat.

Standard Models

UPC#

686334 715751 F1F2605CA1

715768 H1H2605CA1 240 20.83 715775 G1G2605CA1 277 18.05 715782 F3F2605CA1 208 715799 H3H2605CA1 240 12.04 715805 P3P2605CA1 480 6.02 715812 U3H2605CA4 600 4.81 240 715829 F1F2607CA1 715836 H1H2607CA1 240 31.25 715843 G1G2607CA1 277 27.07 715850 F3F2607CA1 208 715867 H3H2607CA1 240 18.06 715874 P3P2607CA1 480 9.03 715881 U3H2607CA4 600 7.22 240 715898 F1F2610CA1 715904 H1H2610CA1 240 41.66 715911 G1G2610CA1 277 36.1 715928 F3F2610CA1 208 715935 H3H2610CA1 240 24.08 715942 P3P2610CA1 480 12.04 2345 715959 U3H2610CA4 600 9.63 240 3061 715966 F3F2615CA1 715973 H3H2615CA1 240 36.12 715980 P3P2615CA1 480 18.06 2559 715997 U3H2615CA4 600 14.45 240 3596 716000 H3H2620CA1 19.4 716017 P3P2620CA1 717502 U3H2620CA4 600 19.26 240 3991 717519 F3F2625CA1 717526 H3H2625CA1 240 60.21 717533 P3P2625CA1 480 30.1 3571 717540 U3U2625CA1 600 24.08 4356 717557 F3F2630CA1 717564 H3H2630CA1 240 72.25 717571 P3P2630CA1 480 36.12 4286 717588 U3U2630CA1 600 28.9 5431 717595 F3F2640CA1

717618 P3P2640CA1 480 48.16 717625 U3U2640CA1 600 38.53 6146 717632 F3F2650CA1

717656 P3P2650CA1 480 60.21 717663 U3U2650CA1 600 48.16 6861

MODEL KW BTU’s VOLTS PH AMPS

5 17065

7.5 25598

10 34130

15 51195

68260

25 85325

30 102390

40 136520

50 170650

208

208 41.68

240 48.16 480 24.08 3096

208 69.48

208 83.37

208 111.17

208 138.96

24.03

13.89

36.05

20.84

48.07

27.79

CONTROL

VOLTS

TEMP

RISE OF

34 490 75

45 560 75

26 1200 75

39 1200 75

52 1200 75

24 3300 175

29 3300 175

38 3300 175

48 3300 175

CFM

(LBS.)

LIST

1129

1381

1452

1595

1988

2273

2631

3499

3820

5073717601 H3H2640CA1 240 96.33

5787717649 H3H2650CA1 240 120.42

Page 22

2600 Series Downow Unit Heater

Field Installed Accessories

UPC#

686334

692632 FSW5112 Summer Fan Switch 186

691109 TC1602

717755 A1600 Ceiling Mount Bracket 5-20 KW Models 120

717762 A1601 Ceiling Mount Bracket 25-50 KW Models 134

MODEL DESCRIPTION LIST

Wall Mounted Stratication Thermostat

Range - 70 oF - 140 oF

184

5700 Series Conned Space Plenum Rated Heater

UPC#

686334

717793 D1602 Linear Louvered Diffuser 5-20 KW Models 401

717809 D1612 Linear Louvered Diffuser 25-50 KW Models 598

717816 D1600 Radial Louvered Cone Diffuser 5-20 KW Models 444

717823 D1610 Radial Louvered Cone Diffuser 25-50 KW Models 519

717830 D1603 Anemostat Diffuser 5-20 KW Models 401

717847 D1613 Anemostat Diffuser 25-50 KW Models 598

MODEL DESCRIPTION LIST

Features

• Easily ts between joists for typical installation.

• Zero clearance for wall and ceiling mounting as well as oor

mounting with appropriate inlet and outlet clearances.

• Bracket standard or can be mounted by 3/8” threaded rod

(eld supplied)

• Automatic reset thermal limit for safety

• 1 Phase model wattage eld changeable from 1874 to 5000

Watts.

• 24V control circuit on three phase models with hydraulic thermostat

Conforms to ANSI/UL 1995

Certied to CAN/CSA C 22.2 No.236-11

Product Dimensions

A B C D E F G

14.4” 19.4” 14.5” 8.4” 5.1” 9.2” 1.8”

Standard Models

UPC#

686334

726245 HF5705T

727252 H3H5705T

726269 P3P5705T 5000 17065 480 3 6 57 oF 16' 275 32

707367 DCS-MT303 Optional Field Installed Disconnect Switch, 30 Amp @ 600Volts 63

MODEL WATTS BTU's VOLTS PHASE AMPS TEMP RISE

5000 17065

4165 14215 17 48 oF

3332 11365 14 38 oF

2500 8533 10 29 oF

3750 12798

3123 10659 15 36 oF

2500 8553 12 29 oF 16' 275

1874 6396 9 21 oF

3750 12799 208 3 10.4 57 oF 16’ 375 32

5000 17065 240 3 12 57 oF 16' 275 32

For 24V control on single phase models delete "T" sufx 146

240 1

208 1

21 57 oF

18 43 oF

AIR

THROW

CFM

16' 275 32

WT.

(LBS.)

LIST

772

832

Page 23

5600 Series Multiple Wattage Fan Forced Unit Heater

CASING: Fabricated of die formed, heavy

gauge steel and nished with two tone,

brown and beige, durable powder coated paint. Supply air is drawn through the rear heavy duty expanded steel inlet grill. Heated air is discharged through front adjustable louvers, which are spring loaded for individual adjustment.

ELEMENT: Heavy-duty block n

element design. The multiple tap electric

connection design allows eld conversion

to eight wattage settings at 208/240-Volt single phase or 240/480 Volt, 3 phase. Units are available on special order with a

specic wattage/voltage setting.

MOTOR: Motor shall be totally enclosed, permanently lubricated, all angle industrial rated with thermal overload protection.

Product Specications

WIRING: Wiring to terminal block adjacent to incoming knockout in accordance with NEC and local codes.

Front view

Manufactured in U.S.A.

THERMAL OVERLOAD: All heaters shall be equipped with an automatic reset thermal cutout to shut down the element and motor circuits if unsafe operating temperatures are exceeded.

CONTROLS: The heater shall have a heavy-duty hydraulic thermostat factory installed and wired. All controls and wiring shall be in a large wiring compartment with hinged door for easy access. An optional disconnect switch shall

be available for eld installation.

MOUNTING: Heaters are standard with a three position-mounting bracket for wall, ceiling or workbench. Heaters can be mounted for horizontal or vertical discharge. Note: Minimum mounting height is 6 feet, and minimum distance from side of heater to nearest wall is 6 inches. Note: Approved for residential applications.

Product Dimensions

A B C D E F G

14” 12-11/16” 14” 1-9/16” 1-9/16” 9” 2-3/4”

Standard Models

UPC#

686334

707282 HF5605T

707299 H3H5605T

707305 P3P5605T 5000 17065 480 3 6 57 oF 16' 275 32

707367 DCS-MT303 Optional Field Installed Disconnect Switch, 30 Amp @ 600Volts 63

MODEL WATTS BTU's VOLTS PHASE AMPS TEMP RISE

5000 17065

4165 14215 17 48 oF

3332 11365 14 38 oF

2500 8533 10 29 oF

3750 12798

3123 10659 15 36 oF

2500 8553 12 29 oF 16' 275

1874 6396 9 21 oF

3750 12799 208 3 10.4 57 oF 16’ 375 32

For 24V control on single phase models delete "T" sufx 146

240 1

208 1

21 57 oF

18 43 oF

AIR

THROW

CFM

16' 275 32

WT.

(LBS.)

LIST

772

8325000 17065 240 3 12 57 oF 16' 275 32

Page 24

6300 Series Multiple Angle Cabinet Unit Heater

Product Specications

The electric cabinet unit heater is designed for mounting in any position, fully recessed, semi-recessed or surface mounted. All capacities, voltages, physical sizes, grille arrangements and options

shall be as specied on the plans. All units must be eld convertible

to the following:

1. For control by a eld supplied remote thermostat.

2. Load management control with an external dry switch. When closed unit operates under control of either the internal or the external thermostat. When open, unit turns off.

3. Any grille arrangement.

CABINET: The cabinet shall be constructed of heavy duty 16 gauge

Manufactured in U.S.A.

lters and all internal components. The grill conguration must be easily eld convertible to any air ow conguration (by removal of no more than four fasteners). The cabinet shall have a textured nish of two coats of powder coat epoxy and be

suitable for use with optional kick space base.

HEATING ELEMENTS: The heating elements shall be warranted for 1 year and shall be non-glowing design consisting

of special high temperature resistance wire enclosed in an incoloy sheath to which steel ns are furnace brazed. The heating

elements shall be located directly in front of the blower discharge air for uniform heating. They shall be mounted with a single anchor at one end to minimize effects of thermal expansion and contraction.

Zinc coated steel. The heater shall have a removable front door for easy access to the control panel, elements, motor-blower assembly,

SAFETY CUTOUT: Thermal safety limits shall be built into the system to automatically shut off heater in event of overheating due to any cause. The safety cutouts shall be of two types: A. The primary limit shall be an automatic capillary type to sense the heat along the full length of the heating elements. It shall

de-energize the heaters by opening the coil circuit on the heating contactors.

B. The secondary limit shall be a manual reset thermal device to interrupt power to the heating elements.

MOTOR AND BLOWER ASSEMBLY: The motors and blowers shall be direct drive and resiliently mounted on rigid heavy gauge frame for quiet operation and long life. The motor shall be two-speed, shaded pole type, rated for the voltage (480 to 600 Volts are single speed only). Each shall have built-in automatic reset overload protection and are life time lubricated. The motor shall be vented and mounted in the air stream to provide maximum cooling of the motor.

HIGH AND LOW HEAT RANGES: All units will be supplied as standard with a switch for selecting full heat at high fan speed or reduced heat at low fan speed (On 480 & 600 Volt units the switch changes the heat but not the fan speed).

OVER CURRENT PROTECTION: Circuit breakers shall be provided for branch circuit protection where required by NEC. Circuit breakers are optional on all other heaters.

TEMPERATURE CONTROL: Integral factory installed thermostat shall be tamper resistant, linear capillary type.

Mounting Congurations

Up Flow Down Flow

W W

Y Y Y Z X X XZ

A A

Z Z

D D D

Completely

Recessed

Semi

Recessed

D D D

Recessed

D D D

Completely

Recessed

YYY

Completely

Recessed

Semi

Recessed

Ceiling Mounted

KEY: W = 6” minimum, X = 12” minimum, Y = 0” or greater, Z = 24” minimum

NOTE: Semi-recessed units are to be recessed at a maximum of 3 1/2” unless grill

conguration is front in and front out.

MOUNTING CLEARANCES: Proper clearances are indicated for each mounting conguration on all positions. Minimum clearance from side of unit to the wall is zero inches. Mounting inches are provided in the back of the cabinet, accessible through the blower compart-

XXXX

ment, if necessary, remove blower deck if additional mounting screws or bolts are desired. Blower deck may be slipped forward by loosening four screws at the front to provide access to mounting holes.

Page 25

6300 Series Multiple Angle Cabinet Unit Heater

Product Features (2-24 KW; All Voltages)

• For commercial and institutional application such as stores,

schools, ofces, transportation terminals, churches, entrance

ways.

• Wall or ceiling mount; surface, semi-recessed or fully recessed.

• (8) air inlet and outlet congurations.

• Capacities from 2-24 KW with 230 to 1,000 CFM

• Motors are two speed, shaded pole, resilient mounted, direct drive. High/low heat and blower speed offer versatility.

• ETL Listed.

Product Dimensions

Mounting Hole Locations

(Back View of Unit)

• Beige powder coated nish

• Choice of eight standard control options include unit or wall mounted 120 or 24V thermostats, with or without built-in control transformers.

• Industrial type nned tubular elements.

• Easily removable fan and element decks for simplied

maintenance.

• Full length thermal protection.

• Limited warranty-one year.

1/2”, 3/4” Conduit

1/2”, 1-1/2” Conduit

1/4” Dia. Mounting Holes

25”

11-11/16”

12”

Knockouts

24” 44” 56”

4-1/16”

Stocked Models & Features

HEATER

LENGTH

33”

46”

33”

46”

*Factory wired for 3-phase, eld convertible to 1-phase.

UPC#

686334

667142 6333D052033B30D0F

667081 6333D054833B30D0F 7.8 4.6 480 3

667197 6346D102433B30D0F

667203 6346D104833B30D0F 15.4 8.1 480 3

473620 6333D053834B30D0F1

473637 6333D054134B30D0F1 6.97 4.18 415

473644 6346D103834B30D0F1

473651 6346D104134B30D0F1 13.94 8.36 415

MODEL

KW BTU’s AMPS CFM KW BTU’s AMPS CFM

5 17065

10 34130

5 17065

10 34130

• 1 / 3 phase eld convertible with 24 Volt control circuit.

• Disconnect switch, dust lter, & high low operation.

• Built-in thermostat and eld convertible for remote thermostat.

HIGH LOW

25.0 / 17.6

43.6 / 30.7

International Models

7.6

15.2

Accessories

3/5 KW = 33” 6/10 KW = 46”

250 3 10239

500 6 20478

250 3 10239

500 6 20478

2-3/8”

15.4 / 9.2

26.9 / 16.2

4.56

9.12

2-3/4”

VOLTS PHASE

208 1-3*

230

240 1-3*

460

380

230

380

460

3-3/8”

25”

1-9/16”

(4-Wire)

9“

Wt.

(lbs.)

99 3105667159 6333D052433B30D0F 21.8 / 15.4 13.5 / 8.2 240 1-3*

130 3502

99 3105

130 3502

3“

LIST

UPC#

MODEL SIZE DESCRIPTION

686334

DUCT COLLAR

441568 DC-33 33"

441575 DC-46 46" 215

441582 DC-66 66" 269

441599 DC-79 79"

453783 TF-33 33"

453790 TF-46 46" 180

453806 TF-66 66" 224

453813 TF-79 79"

The same model is used for the inlet or outlet. If duct collars are required for both inlet & out-

let then 2 must be ordered.

RECESSING TRIM FRAMES

Recessing Trim Frames should be ordered

to "trim-out" any recessed or semi-recessed

installation.

LIST

177

328

160

247

UPC#

686334

Fresh Air Make-Up Intake Flange & Kickbase

771580 FAM33 33" 349

771597 FAM46 46" 402

771603 FAM66 66" 620

771610 FAM79 79" 681

771542 KB33 33" 139

771559 KB46 46" 147

771566 KB66 66" 178

771573 KB79 79" 194

MODEL SIZE LIST

Kickbase (Pedestal) ONLY

Page 26

6300 Series Multiple Angle Cabinet Unit Heater

Custom Specied Models

HOW TO DESIGNATE A MODEL:

63 46 D 08 24 1 2 B3 S D O F

Number of Wires in Electrical Service

2 or 3

B3, B4, B5, B6

Control Options

(see control options chart)

Summer Fan Switch

S = Included O = Not Included

Disconnect Option

O = None

C = Circuit Breaker D = Disconnect Switch

Motor Fusing Option

M = Required O = Not Required

480V

600V

Phase

D = Front in / Front out

C = Front in / Top out

Element KW

2KW through 24KW

250 230

See model chart for length and KW options.

Element Voltage

20 = 208V 24 = 240V 27 = 277V

41 = 415V 48 = 480V 57 = 600V

CFM

1 = Single Phase 3 = Three Phase

1-PHASE UNITS - AMPS (HIGH) 3-PHASE UNITS - AMPS (HIGH)

208V 240V 277V 600V 208V 240V

10.6 9.3 8.12 3.83 9.22 8.13 4.14 3.33 2514

Series Number

Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 Step 7 Step 8 Step 9 Step 10 Step 11 Step 12

LENGTH

33”

Cabinet Size

Air Flow Conguration

33=33” 46 = 46” 66 = 66” 79 = 79”

A = Bottom in / Top out B = Bottom in / Front out

High Low Left Right High Low 3-WIRE

2 1 2

3 2 3 15.4 13.5 11.7 5.5 9.22 8.13 4.14 3.38 2589

4 2 4 20.2 16.7 15.3 7.2 13.4 11.8 6 6.22 2692

Elements per

Heat Deck

Disposable Filter Option

F = Required O = Not Required

LIST

46”

66”

79”

5 3 5 25 21.8 19 8 17.6 15.4 7.8 5.5 2814

6 3 6 29.9 26 22.6 10.5 17.6 15.4 7.8 6.3 2935

4 2 2

6 4 3 30.8 26.9 23.1 10.79 18.4 16.2 8.1 6.5 2993

8 4 4 40.4 35.2 30.5 14.12 26.7 23.4 11.7 9.4 3131

10 6 5 50 43.6 37.7 17.5 35.1 30.7 15.4 12.3 3258

12 6 6 59.6 51.9 44.9 20.8 35.1 30.7 15.4 12.3 3325

6 3 2 2

9 6 3 3 46.2 40.4 35 16.3 27.6 24.3 12.3 9.9 3791

12 6 4 4 60.6 52.9 45.8 21.3 40.1 35.2 17.7 15.6 3938

15 9 5 5 75 65.4 56.7 25.5 52.6 46.1 23.1 15.7 4075

18 9 6 6 89.4 77.9 67.5 31.3 52.6 46.1 23.1 18.5 4222

8 4 2 2

12 8 3 3 61.5 53.8 46.5 21.6 36.7 32.3 16.2 13 4164

16 8 4 4 80.7 70.5 61 28.2 53.4 46.8 23.5 18.8 4323

20 12 5 5 NA 87.1 75.4 34.9 70.1 61.4 30.7 24.6 4392

500 460

750 690

1000 920

21.1 18.6 16 7.46 18.7 16.2 8.1 6.5 2865

31.8 27.9 24.1 11.3 27.6 24.3 12.3 9.8 3642

42.3 37.1 32 14.9 36.7 32.3 16.2 13 4075

24 12 6 6 NA NA 89.8 41.6 70.1 61.4 30.7 24.6 4471

Note: Amps include motor Amp loads.

Note: Please see page 60 for custom color availability - add 10% to net heater cost.

Note: Products listed in this section are custom built and subject to 100% cancellation/restocking charges.

Page 27

6300 Series Multiple Angle Cabinet Unit Heater

Control Option (Step 8 on Model Designator)

SUFFIX DESCRIPTION LIST

B3 In-Built 1-Stage Stat and Relays which are operated by an internal 24 Volt source. 79

B4* In-Built 1-Stage Stat and Relays which are operated by an internal 120 Volt source. 323

B5 In-Built 2-Stage Stat & Relays which are operated by an internal 24 Volt source. 79

B6* In-Built 2-Stage Stat and Relays which are operated by an internal 120 Volt source. 323

*Motor fusing included for units with 120V internal or external control source.

Disconnect Option “C” Circuit Breaker (Step 10 on Model Designator)

10 501 501 319 936 501 501 867 936

12 501 501 319 936 501 501 867 936

15 501 501 501 936 841 602 867 936

16 501 501 501 936 841 602 867 936

18 501 501 501 936 841 602 867 936

20 N/A 501 501 936 841 777 867 936

24 N/A N/A 501 936 841 777 867 936

208V 240V 277V 600V 208V 340V 480V 600V

2 252 252 319 936 425 417 867 936

3 252 252 319 936 425 417 867 936

4 252 252 319 936 425 417 867 936

5 252 252 319 936 425 417 867 936

6 252 252 319 936 425 417 867 936

8 252 252 319 936 425 417 867 936

SINGLE PHASE THREE PHASE

Circuit breakers shown in shaded areas are required by NEC because unit exceeds 48 Amps, all

others listed are optional unless otherwise stated.

Disconnect Option “D” Disconnect Switch

(Step 10 on Model Designator)

208V 240V 277V 600V 208V 340V 480V 600V

2 195 195 195 250 250 250 240 250

3 195 195 195 250 250 250 240 250

4 195 195 195 250 250 250 240 250

5 195 195 195 250 250 250 240 250

6 240 195 195 250 250 250 240 250

8 270 240 240 250 250 250 240 250

10 N/A 313 240 250 282 250 240 250

12 N/A N/A 313 250 282 285 240 250

15 N/A N/A N/A 250 N/A 285 240 250

16 N/A N/A N/A 250 N/A 391 240 250

18 N/A N/A N/A 250 N/A 391 240 250

20 N/A N/A N/A 250 N/A N/A 313 250

24 N/A N/A N/A 250 N/A N/A 313 250

Disconnect option is not available on heaters with circut breakers.

SINGLE PHASE THREE PHASE

Fan Switch & Motor Fusing

(Step 11 on Model Designator)

SUFFIX DESCRIPTION ADDER

S Summer Fan Switch 48

Motor Fusing

(when not provided by

control option)

Filter Option

(Step 12 on Model Designator)

SUFFIX SIZE

33" 1 46" 1 26

66" 2 46 79" 2 52 33" 1

46" 1 60 66" 2 395 79" 2 629

Qty.

REQ'D

FILTER

TYPE

Replaceable

Washable

LIST

Page 28

8500 Series Commercial Slope Top Wall Convector

Manufactured in U.S.A.

• Front In/Top Out or Bottom In/Top Out air pattern.

• 16 gauge steel housing powder coated with

beige nish.

• Tubular pre-wired wireway with 40 Amp capacity.

• Connection boxes for right or left hand wiring with combination 1/2” - 3/4” knockouts at back and bottom.

• Stainless steel element with Aluminum ns.

• Linear limit type thermal overload with automatic reset.

• Limited by max amp draw of 25 Amps (with no controls).

HOW TO DESIGNATE A MODEL:

85 2 5 125 H B

Series Number

Cabinet Size

1=10”H x 3”D 2=14“H x 5”D 3=20”H x 5”D

Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 Step 7

Watts per Foot

Unit Length (feet)

2, 3, 4, 5, 6, 7, 8, 9, 0 (enter 0 for 10’)

Selectable in 1 watt increments up to max per model series

Voltage

E = 120V F = 208V G = 277V H=240V

8510= 250 max 8520=500 max 8530=750 max

Air Flow

DST1

B=Bottom in F=Front in

• Pencil proof louver design.

• Custom colors available, consult factory. Note: Not for residential applications. Note: Disconnect limits amperage to 20 Amps.

Standard Models

Factory Installed Options

(see control option chart)

blank=none T1 or T2=Thermostat

R1, R2, or R9=Relay DS=Disconnect

HEATER

LENGTH

2’

3’

4’

5’

6’

7’

8’

8510 SERIES 8520 SERIES 8530 SERIES

WATTS

per

FOOT

100-250

333-750 N/A 626 756

100-250

333-750 N/A 717 866

100-250

333-750 N/A 819 1001

100-250

333-750 N/A 908 1100

100-250

333-750 N/A 999 1208

100-250

333-750 N/A 1098 1330

100-250

333-750 N/A 1208 1463

3” Depth x 10” Height

Max watts per foot = 250

MODEL LIST MODEL LIST MODEL LIST

516

8512

592

8513

683

8514

753

8515

825

8516

906

8517

998

8518

5” Depth x 14” Height

Max watts per foot = 500

8522

8523

8524

8525

8526

8527

8528

565

652

753

827

906

998

1098

5” Depth x 20” Heigh

Max watts per foot = 750

688

8532

787

8533

907

8534

1001

8535

1100

8536

1208

8537

1330

8538

9’

10’

100-250

8519

333-750 N/A 1329 1605

100-250

8510

333-750 N/A 1460 1765

1098

1208

8529

8520

1208

8539

1329

8530

Note: All models qualify for international use Note: Products listed in this section are custom built and subject to 100% cancellation/restocking charges.

1463

1605

Page 29

8500 Series Commercial Slope Top Wall Convector

Product Specications

CABINET:

Rugged 16 gauge front cover with discharge louvers in sloped top design. Pencil proof louver design for

sloped outlet and front inlet grill. The nish shall be durable powder coated paint. Air ow available as

bottom in - top out, or front in - top out.

ELEMENT:

All steel high mass element construction with Nickel-Chromium resistance wire embedded in compacted

efcient dielectric to ensure proper heat transfer. Aluminum ns mechanically bonded to steel tube allows

for increased surface area and even heat transfer.

LIMIT CONTROLS:

Automatic reset hydraulic thermal overload covers full length of heating element and shuts down heater when safe operating temperatures are exceeded.

WIRING:

Connection boxes in either end with ½ inch to ¾ inch knockouts at back and bottom. Tubular prewired wire way with 40 Amp capacity.

CONTROLS:

Optional built in tamper resistant thermostat and disconnect is adjustable through top outlet louver.

MOUNTING:

Heater shall be surface mounted to wall or mullion. Bottom inlet units must be mounted a minimum of 4

inches above nished oor front inlet.

Voltage & Wattage Specication

Voltage Standard Wattages Per Foot Heater Lengths

120-277 100,125,150,165,187,200,250 2’ through 10’

In-Built Control Options

SUFFIX DESCRIPTION LIST

In-Built Tamper Proof, Single Pole, Bimetal Thermostat - 0°-110°F temp. range, 25

DS Double Pole Disconnect Switch, 20 Amp 150

Note: Due to size limitations, 8510 series convectors can only have thermostats as In-Built control options.

SUFFIX DESCRIPTION LIST

In-Built Tamper Proof, Double Pole, Bimetal Thermostat - 0°-110°F temp. range,

Amp

25 Amp

102

132

Mounting/Air Flow Options

FRONT IN

TOP OUT

BOTTOM IN

TOP OUT

R1 DPST Relay, 30 Amps, up to 277V, 120V coil 145

R2 SPST Relay, 18 Amps @ 277V (max), 24V coil 145

24V Transformer and SPST Relay, 22 Amps @240V, 18 Amps @ 277V (max), 24V

(cannot be used in conjunction with T2 option)

coil

159

Page 30

8800 Series Institutional Wall Convector

Manufactured in U.S.A.

• Single phase heaters available in all common voltages from 120V to 600V.

• 11 gauge perforated steel housing powder coated with textured ivory

nish.

• Tamper proof left side control panel houses built-in single pole thermostat

- range 40OF-110OF and disconnect switch. Thermostat on 120V-277V units is line voltage and low voltage (24V) on 346V-600V units.

• Linear limit type thermal overload with automatic reset.

• Tamper proof fasteners

• Stainless steel element with Aluminum ns.

Note: Not for residential applications.

Standard Models

UPC#

686334

899000 E8801050 899062 F8801050 208 2.404 899123 H8801050 240 2.083 899185 G8801050 277 1.805 899246 L8801050 346 1.445 899307 P8801050 480 1.042 899369 U8801050 600 0.833 899017 E8802075 899079 F8802075 208 3.606 899130 H8802075 240 3.125 899192 G8802075 277 2.708 899253 L8802075 346 2.168 899314 P8802075 480 1.563 899376 U8802075 600 1.25 899024 E8803100 899086 F8803100 208 4.808 899147 H8803100 240 4.167 899208 G8803100 277 3.610 899260 L8803100 346 2.890 899321 P8803100 480 2.083 899383 U8803100 600 1.667 899031 E8804125 899093 F8804125 208 6.010 899154 H8804125 240 5.208 899215 G8804125 277 4.513 899277 L8804125 346 3.613 899338 P8804125 480 2.604 899390 U8804125 600 2.083 899048 E8805150 899109 F8805150 208 7.212 899161 H8805150 240 6.25 899222 G8805150 277 5.415 899284 L8805150 346 4.335 899345 P8805150 480 3.125 899406 U8805150 600 2.5 899055 E8806200 899116 F8806200 208 9.615 899178 H8806200 240 8.333 899239 G8806200 277 7.220 899291 L8806200 346 5.780 899352 P8806200 480 4.167 899413 U8806200 600 3.333

MODEL WAT TS BTU’S VOLTS AMPS

120 4.167

500 1706

120 6.25

750 2560

120 8.333

1000 3413

120 10.417

1250 4266

120 12.5

1500 5120

120 16.667

2000 6826

LENGTH

(IN.)

18 2333

28 2657

36 2970

48 3337

60 3618

72 4017

LIST

International Models

UPC#

686334 984140 M8801050i

984157 H8801050i 240 2.1 984164 M8802075i 984171 H8802075i 240 3.1 984188 M8803100i 984195 H8803100i 240 4.2 984201 M8804125i 984218 H8804125i 240 5.2 984225 M8805150i 984232 H8805150i 240 6.3 984249 M8806200i 984250 H8806200i 240 8.3

MODEL WATTS BTU’S VOLTS AMPS

500 1706

750 2560

1000 3413

1250 4266

1500 5120

2000 6826

220 2.3

220 3.4

220 4.5

220 5.7

220 6.8

220 9.1

LENGTH

(IN.)

18 2333

28 2657

36 2970

48 3337

60 3618

72 4017

LIST

Page 31

HOW TO DESIGNATE A MODEL:

Element Voltage

8800 Series Institutional Wall Convector

Product Specications

CABINET:

Institutional enclosure 11 gauge perforated steel with sloped top design. Heavy duty end caps welded to the enclosure. Control compartment for housing thermostat and disconnect switch is accessible by use of

security type fastener. The entire enclosure is protected by epoxy powder coated paint nish.

ELEMENT:

All steel high mass element construction with Nickel-Chromium resistance wire embedded in compacted

efcient dielectric to ensure proper heat transfer. Aluminum ns mechanically bonded to steel tube allows

for increased surface area and even heat transfer.

LIMIT CONTROLS:

Automatic reset hydraulic thermal overload covers full length of heating element and shuts down heater when safe operating temperatures are exceeded.

WIRING:

Wiring connections shall be made in left end of cabinet enclosure. Wiring must enter into control enclosure behind perforated steel grill.

CONTROLS:

All controls are accessible only through control enclosure door. Security type fasteners restrict access to controls. Built in thermostat and disconnect switch with manual adjustment are located in control enclosure.

H 880 3 100

Series Number

L=346 P=480 U=600

E=120 F=208 G=277 H=240

Unit Length

1=18” 2=28” 3=36”

4=48” 5=60” 6=72”

Unit Wattage

050=500 075=750 100=1000

125=1250 150=1500 200=2000

left side view

5.00”

ACCESS DOOR

18.00” NOTE: Allow 12 inch clearance on left end of unit and 4” to the floor.

FLOOR

4.00” Minimum

Optional In-Built Controls

SUFFIX DESCRIPTION LIST

T2 Tamperproof, Hydraulic, Double pole In-Built thermostat range 40°-110°F, 25 Amp 134

24V* 24 Volt In-Built single pole thermostat for 120V 208V, 240V & 277V models. 162

*Not available on international models

Page 32

HOW TO DESIGNATE A MODEL:

M41

4100 Series Recessed Commercial Wall Convector

25 F 48

1000

Manufactured in U.S.A.

• Front In / Front Out air pattern

• 16 gauge steel housing powder coated with

textured beige nish.

• Tubular pre-wired wireway with 40 Amp capacity.

• Connection boxes for right or left hand wiring with combination 1/2”-3/4” knockouts at back and bottom.

• Steel heating element with steel ns.

• Linear limit thermal overload with automatic reset.

M4125 Dimensions - Cabinet Sizes 4” Deep x 11” High

LENGTH (Inches) WEIGHT (Lbs.)

24 20

36 33 818

48 39 949

60 49 1077

Series Number

Cabinet Size

25=11”H x 4”D 45=20”H x 5”D

Voltage/Phase

F=208V, 1 Phase G=277V, 1 Phase

H=240V, 1 Phase J=208V, 3 Phase

K=240V, 3 Phase

24, 36, 48, 60, or 72

Unit Length (Inches)

• Recess trim frame included.

• Custom colors available, consult factory. Note: Not for residential applications.

WATTS per FOOT

AVAILABLE

187 250 333

VOLTS AVAILABLE PH

208 240 277

Total Wattage

Blank=None

Control Option

(See control option chart)

T or T2=Thermostat R, R2, or R9=Relay

LIST

708

72 56 1198

LENGTH

(Inches)

WEIGHT

(Lbs.)

24 45

36 53 929 36 60 1072

48 63 1 1126 48 71 1 1306

60 77 1368 60 87 1591

72 92

24 47

36 57 997 36 60 1072

48 67 1 1217 48 71 3 1306

60 82 1473 60 87 1591

72 100 1791 72 106 1919

WATTS per FOOT

AVAILABLE

M4145 Dimensions - Cabinet Sizes 5” Deep x 20” High

187 250 333

500 666

VOLTS

AVAILABLE

208 240 277

LIST

763 24 49

1646

775

LENGTH

(Inches)

72 106

24 49

WEIGHT

(Lbs.)

WATTS per FOOT

AVAILABLE

750

500 666 750

VOLTS

AVAILABLE

208 240 277

208 240

LIST

873

1917

873

Note: Products listed in this section are custom built and subject to 100% cancellation/restocking charges.

Note: Please see page 60 for custom color availability - add 10% to net heater cost.

Page 33

4100 Series Recessed Commercial Wall Convector

CABINET:

4100 series casing shall be of square design with front inlet and outlet grills suitable for

recess installation. The cabinet is fabricated from 16 gauge cold rolled steel and nished

with powder coated baked enamel. Junction boxes are available for left or right wiring and connected by pre-wired 40 Amp capacity wireway.

ELEMENT:

All steel high mass element construction with Nickel-Chromium resistance wire embedded

in compacted efcient dielectric to ensure proper heat transfer. Aluminum ns mechanically

bonded to steel tube allows for increased surface area and even heat transfer.

LIMIT CONTROLS:

Automatic reset hydraulic thermal overload covers full length of heating element and shuts down heater when safe operating temperatures are exceeded.

WIRING:

Wiring connections shall be made in left end of cabinet enclosure. Wiring must enter into control enclosure behind perforated steel grill.

CONTROLS:

All controls are accessible only through control enclosure door. Security type fasteners restrict access to controls. Built in thermostat with manual adjustment are located in control enclosure.

In-Built Control Options for Single Phase Units

SUFFIX DESCRIPTION LIST

T In-Built Tamper Proof, Single Pole, Hydraulic Thermostat - 40°-110°F temp. range, 25 Amps 106

T2 In-Built Tamper Proof, Double Pole, Hydraulic Thermostat - 40°-110°F temp. range, 25 Amps 131

R DPST Relay, 30 Amps, up to 277V, 120V coil 139

R2 SPST Relay, 18 Amps @ 277V (max), 24V coil 147

R9 24V Transformer and SPST Relay, 22 Amps @24V, 18 Amps @ 277V (max), 24V coil 175

Note: No In-Built control options for 3 phase models.

12” Control Section

UNIT LENGTH MODEL 4125 LIST MODEL 4145 LIST

12” MSE4120-12 81 MSE4140-12 131

Note: Control section required when relay is ordered.

Solid Back Panel

UNIT LENGTH MODEL 4125 LIST MODEL 4145 LIST

24” MS4122 66 MS4142 106

36” MS4123 86 MS4143 11 7

48” MS4124 112 MS4144 179

60” MS4125 136 MS4145 223

72” MS4126 159 MS4146 259

Page 34

3000 Series Fan Forced Ceiling Heater

WHITE

Manufactured in U.S.A.

UPC#

686334

948821 E3035DWBW 750 or 1500 5120 120 13 948838 E3038DWBW 900 or 1800 6143 120 15 948883 H3032DWBW 750 or 1000 - 1500 or 2000 6826 208 / 240 8 948906 G3032DWBW 2000 6826 277 7

MODEL

Selectable Wattages, Back Cans, And Power Disconnects

• Wattage selectable at time of installation - models shipped wired to highest Wattage

•

Fan purge circuit (has 2 wire control circuit for use with remote wall thermostat)

• Models may not be used with remote double pole thermostat

• Drywall depth embossments on back can

• Powder coated 18 gauge steel front

• Manual reset thermal limit

• Steel block n element

• Propeller style fan blade - 1060 RPM / 100 CFM

• Weight 6 lbs.

• Optional eld installed control voltage relays available

• Rough in dimensions - 9 1/4” Wide - 12 1/8” High - 3 5/8” Deep

• Grill dimensions: 9 25/32” Wide - 13” High

3380 Series Commercial Fan Forced Ceiling Heater

Product Specications

Standard Models

SELECTABLE

INSTALLATION WATTAGE

MAX

BTU'S

VOLTS

MAX

AMPS

Field Installed Accessories

UPC#

686334

996846 30R 24 VOLT RELAY 996853 30R2 120 VOLT RELAY 951500 30R8 208/240 VOLT RELAY 951494 30R7 277 VOLT RELAY 996976 303EX8RW 1" EXTENDER 39 996969 303EX16RW 2" EXTENDER 40 996952 303EX32RW 460033 TB3000 T-BAR FRAME 58

MODEL DESCRIPTION LIST

4" SURFACE MOUNT FRAME

LIST

254

The heaters are be constructed of a heavy gauge steel housing. The rough-

in dimensions are 19-3/16” wide x 4” deep. The nish shall be baked-on

powder coat in Ceiling White color. The units shall be available in ratings from 1500 through 4800 Watts with an optional factory installed single pole thermostat.

The heaters have a low speed 600-RPM motor, which drives a vane axial

blower to deliver a quite 175 CFM’s of down ow air. The heating element shall be of the block nned type with large, parallel steel ns for quick heat

transfer. Unit shall have as standard, a manual reset capillary type limit control, for added safety. Unit weight 22 pounds.

Features & Standard Models

Recess, Surface, Or

“T” Bar Mounting

•

Fan purge circuit (has 2 wire control circuit for use with remote wall thermostat)

• Disconnect switch

• White powder coated 18 gauge steel grill

• Manual reset thermal limit

• Steel block n element

• Vane axial fan blade:

1.5KW - 4.0KW units: 700 RPM motor; 175 CFM 4.8KW units: 900 RPM motor; 200 CFM

• Rough in dimensions:

14 3/16” wide x 19 5/16” high x 4” deep

• Grill dimensions:

15 3/8” wide x 20 9/64” high

• Optional factory installed tamper resistant thermostat

UPC#

686334 366489 E3383D-RP 1.5 5120 120

366298 F3386D-RP 4.0 13600 208 19.2 72 °F 619 366304 F3387D-RP 4.8 16382 208 23.1 76 °F 697 366342 HF3384D-RP 2.0 / 1.5 6826/5120 240/208 8.3/7.2 36 °F 541 366359 HF3385D-RP 3.0 / 2.3 10200/7679 240/208 12.5/10.8 54 °F 366366 HF3386D-RP 4.0 / 3.0 13600/10200 240/208 16.8/14.4 72 °F 366373 H3387D-RP 4.8 16382 240 20 76 °F 696 366502 G3383D-RP 1.5 5120 277 5.4 27 °F 589 366410 G3384D-RP 2.0 6826 277 7.2 36 °F 617 366427 G3385D-RP 3.0 10200 277 10.8 54 °F 366434 G3386D-RP 4.0 13600 277 14.4 72 °F 366441 G3387D-RP 4.8 16382 277 17.3 76 °F 772

470889 M3384D-RPi 1680 5734 470896 M3385D-RPi 2520 8600 11.5 50 °F 619 470902 M3386D-RPi 4032 13761 18.3 72 °F 697

MODEL KW BTU’S VOLTS PH AMPS

Manufactured in U.S.A.

International Models

220 1

12.5 27 °F 589

7.6 30 °F 589

TEMP

RISE

LIST

617

697

Accessories

UPC 686334 377850 BOX3310 Additional Back Can 10 lbs 96 381109 3380EX33 Surface Mounting Adapter 1 lb 85 460026 TB3380 2X2 T-Bar Mounting Kit 7 lbs 57

Thermostat- Add sufx T to model

MODEL DESCRIPTION WT. LIST

Factory installed single pole, positive off. Range-60° F-105° F

111

Page 35

3480 Series Commercial Fan Forced Recessed Mounted Ceiling Heater

Manufactured in U.S.A.

Notes

Optional controls must be factory installed. Field installation is not acceptable and violates Listing and factory warranty.

Wall mounted control panels may control multiple units but cannot be used if in-built controls are selected.

480V units include 24V transformer and relay as standard (A1) only TS option control section can be added. Depth dimension of all 480V models is 10-7/8”

Degree F air rise is measured at 710 F.P.M. and 425 CFM. Throw designed for 8 to 12 foot ceilings. db RE 10

Unit Weight: 50 lbs.

Recommended Remote Thermostats: Line Voltage: Single Phase 208-240V ET5DS Single Phase 277V ET5SS Three Phase TW1512

Low Voltage: UT1001

-12

Watt=63.9

Product Specications

Contractor shall supply and install heavy duty ceiling mounted forced air electric heater(s) of the wattage, voltage and phase as indicated on the plans. The heater shall be so designed to provide an even distribution of heated air to the space to be heated by drawing return air in the periphery of the heater, across and through the element and be discharged from the center section of the heater by

means of an electric motor and axial ow fan blade.

Heaters shall be recessed type and mounted ush with the nished

ceiling. The return grille assembly shall be constructed of a one piece heavy gauge steel with 1/4” slots for return air and concentric rings for uniform air discharge. Grille assembly shall be attached to chassis by tamper-resistant (allen head) machine screws. All parts of enclosure shall be heavy gauge steel, zinc coated both sides and

nished in neutral off white powder coat paint.

Enclosure shall be constructed of 1/6” x 3/8” rounded edge horizontal steel louvers which shall be spaced for maximum opening of 5/16”. Louvers shall be welded at every intersection to evenly spaced 1/8” diameter vertical members. Discharge grille to have concentric rings for uniform air discharge. Grille assembly shall be attached to chassis by tamper-resistant (allen head) machine screws. All part of enclosure shall be heavy gauge steel, Zinc coated both

sides and nished in neutral off white colored powder coat nish.

Motor shall be permanent lubricated, unit bearing, totally enclosed, impedance protection. Motors shall operate at no more than 1300 RPM and shall be same voltage as the heater.

Heaters shall have a rating of 425 CFM at 710 F.P.M. with a maximum temperature rise of 44°F and 63.9 DB RE 1012 Watt.

Element assemblies shall consist of two or three corrosion resistant steel sheathed type elements mechanically bonded to

common corrosion resistant steel ns. Each sheathed element shall

consist of helically coiled Nickel Chromium alloy resistant wire completely embedded in and surrounded by magnesium oxide, enclosed and wedged into corrosion resistant steel sheaths. Elements shall have 2” cold conductor pins extending into sheath and shall have a density of no more than 60 Watts per inch.

Heaters shall be equipped with a “manual reset” thermal overload which disconnects elements and motor in the event normal operating temperatures are exceeded. For safety, if opened due to abnormal temperature, thermal overload shall remain open until manually reset. Automatic reset thermal overloads which allow the element to continue to cycle under abnormal conditions will not be accepted. Heaters shall be ETL listed.

Features

• White powder coated 20 gauge grill.

• 208V, 240V, & 277V units have manual reset thermal limit.

• 480V units have manual reset thermal limit, 24V control transformer,

and 24V relay (A1 sufx).

• Enclosed steel n sheath element.

• Rough in dimensions: 23-1/16” sq. x 9-1/8” deep.

Standard Models

UPC#

686344 367653 F3482

367660 G3482 277 7.2 318471 P3482A1 480 4.2 1460 470186 J3482 470209 K3482 240 4.8 470247 Y3482A1 480 2.4 1557 367684 F3483

367691 G3483 277 10.8 318488 P3483A1 480 6.3 1476 470193 J3483 470216 K3483 240 7.2 470254 Y3483A1 480 3.6 1573 367714 F3484

367721 G3484 277 14.4 318501 P3484A1 480 8.3 1490 367745 J3484 367752 K3484 240 9.7 318587 Y3484A1 480 4.8 1601 367769 F3485

367776 G3485 277 18.1 318549 P3485A1 480 10.4 1665 367790 J3485 367806 K3485 240 12.1 318402 Y3485A1 480 6.1 1755 366106 PT3480 Recess Frame - Weight 5 lbs. 142

470971 M3482T2i 470988 N3482T2i 240 8.3 470995 M3483T2i 471008 N3483T2i 240 12.5 471015 M3484T2i 471022 N3484T2i 240 16.7

*Optional Louver Outlet - $70 Adder

MODEL KW BTU’S VOLTS PH AMPS

208

2 6826

10200

13600

17000

International Models

2 6826

3 10200

4 13600

208

220

220 13.6

220 18.2

9.6

5.6

14.4

8.3

19.2

11.1

24.1

13.9

9.1

TEMP

LIST

RISE

1334367677 H3482 240 8.3

15 °F

1431

15 °F

1350367707 H3483 240 12.5

22 °F

1448

1366367738 H3484 240 16.8

30 °F

1475

1532367783 H3485 240 20.8

37 °F

1626

15 °F 1334

22 °F 1350

30 °F 1366

Factory Installed Control Sections

SUFFIX DESCRIPTION LIST

A1 Transformer with 24V Secondary and 24V Relay 127

S Disconnect Switch 158

TA1S Thermostat / Transformer / Disconnect Switch 371

Single Pole Thermostat and Transformer with 24V Secondary and 24V

TA1

A1S Transformer with 24V Secondary and 24V Relay and Disconnect Switch 287

T2 Double Pole Thermostat 126

T2S Double Pole Thermostat and Disconnect Switch 281

R Relay Control Voltage Same as Heater (control voltage eld supplied) 78 R1 Relay 24V Control Voltage (control voltage eld supplied) 127 R2 Relay 120V Control Voltage (control voltage eld supplied) 117

T Single Pole (480V only) 95

L Factory installed adjustable louver diffuser option. 91

Relay

231

Product Dimensions

Page 36

3470 Series Commercial Fan Forced Surface Mounted Ceiling Heater

Product Specications

Contractor shall supply and install heavy duty ceiling mounted forced air electric heater(s) of the wattage, voltage and phase as indicated on the plans. The heater shall so be designed to provide an even distribution of heated air to the space to be heated by drawing return air in the periphery of the heater, across and through the element and be discharged from the center section of the heater by mean of an electric

motor and axial ow fan blade.

Motor: Motor shall be permanent lubricated, unit bearing, totally enclosed shaded pole type with impedance protection. Motors shall operate at no more than 1300 RPM and shall be same voltage as the heater.

Performance: Heaters shall have a rating of 425 CFM at 710 F.P.M. with a maximum temperature rise of 44°F and 63.9 DB RE 1012 Watt.

Element: Element assemblies shall consist of two or three corrosion resistant steel sheathed type elements mechanically bonded to common corrosion resistant

steel ns. Each sheathed element shall consist of helically coiled Nickel Chromium

alloy resistant wire completely embedded in and surrounded by Magnesium Oxide, enclosed and wedged into corrosion resistant steel sheaths. Elements shall have 2” cold conductor pins extending into sheath and shall have a density of no more than 60 watts per inch.

Thermal Overload: Heaters shall be equipped with a “manual reset” thermal overload which disconnects elements and motor in the event normal operating temperatures are exceeded. For safety, if opened due to abnormal temperature, thermal overload shall remain open until manually reset. Automatic reset thermal overloads which allow the element to continue to cycle under abnormal conditions will not be accepted.

Approval: Heaters shall be ETL listed. Commercial and Institutional Applications: Use in - vestibules, entrance

ways, lobbies, rest rooms and small ofce and guard building applications.

Standard Models

9.6

5.6

14.4

8.3

19.2

11.1

24.1

13.9

9.1

TEMP

LIST

RISE

1334367530 H3472 240 8.3

15 °F

1431

1350367561 H3473 240 12.5

22 °F

1463

1366367592 H3474 240 16.8

30 °F

1475

1532367639 H3475 240 20.8

37 °F

1626

15 °F 1334

22 °F 1366

30 °F 1366

UPC# 686334 367516 F3472

367523 G3472 277 7.2 324335 P3472A1 480 4.2 1460 470155 J3472 470162 K3472 240 4.8 470223 Y3472A1 480 2.4 1557 367547 F3473

367554 G3473 277 10.8 324342 P3473A1 480 6.3 1476 323864 J3473 470179 K3473 240 7.2 470230 Y3473A1 480 3.6 1587 367578 F3474

367585 G3474 277 14.4 324359 P3474A1 480 8.3 1490 367608 J3474 208 367837 K3474 240 9.7 324366 Y3474A1 480 4.8 1601 367615 F3475

367622 G3475 277 18.1 324373 P3475A1 480 10.4 1665 367646 J3475 208 367844 K3475 240 12.1 324380 Y3475A1 480 6.1 1755

470919 M3472T2i 470926 N3472T2i 240 8.3 470933 M3473T2i 470940 N3473T2i 240 12.5 470957 M3474T2i 470964 N3474T2i 240 16.7

*Optional Adjustable Louver Diffuser - $91 Adder

MODEL KW BTU’S VOLTS PH AMPS

208

2 6826

3 10200

4 13600

5 17000

International Models

2 6826

3 10200

4 13600

208

220

220 13.6

220 18.2

Factory Installed Control Sections

SUFFIX UNITS DESCRIPTION LIST

TS 1-Phase

TA1S 3-Phase

A1S

1 or 3

Phase

T Single Pole (480V only) 95

Single Pole Thermostat - range 40°-110°F and

Disconnect Switch

Single Pole Thermostat - range 40°-110°F & Transformer with 24V Secondary and 24V Relay & Disconnect Switch

Transformer with 24V Secondary and 24V Relay and

Disconnect Switch

265

277

283

Manufactured in U.S.A.

Product Dimensions

Wall Mounted Control Panels

UPC#

686334

605700 AF3401-24 208

605854 AG3401-24 277

605748 AF3402-24 208

605847 AG3402-24 277

605731 AF3403-24 208

605830 AG3403-24 277

MODEL VOLTS CONTACTORS

1 @ 35 AMPS

2 @ 35 AMPS

3 @ 35 AMPS

BOX

SIZE

1 2 " x 1 2 "

x 4 1/2"

1 5 " x 1 5 "

x 4 1/2"

1 8 " x 1 8 "

x 4 1/2"

LIST

360605793 AH3401-24 240

450605786 AH3402-24 240

600605779 AH3403-24 240

Notes

Optional controls must be factory installed. Field installation is not acceptable and violates Listing and factory warranty.

Factory installed control sections add 2-5/16” to the height of the unit.

Wall mounted control panels may control multiple units but cannot be used if In-Built controls are selected.

480V units include 24V transformer and relay as standard (A1)

- only TS option control section can be added. Depth dimension of all 480V models is 10-7/8”

Degree F air rise is measured at 710 F.P.M. and 425 CFM. Throw designed for 8 to 12 foot ceilings. db RE 10

Unit weight: 32 lbs.

Recommended Remote Thermostats: Line Voltage: Single Phase 208-240V ET5DS Single Phase 277V ET5SS Three Phase TW1512

Low Voltage: UT1001

-12

Watt=63.9

Page 37

CP & RCP Series Radiant Ceiling Panel Heaters

Product Description

For Surface Or Recessed Installation, Radiant Ceiling Panels radiate energy like the solar radiation which warms us, heats objects, not the air. With no moving parts, these heating panels create gentle warmth and toasty comfort.

Radiant Ceiling Panels provide a low surface temperature and broad heat distribution. Clean, gentle comfortable heat that is ideal for offsetting perimeter heat loss or neutralizing downdrafts

over glass. These versatile and exible panels may be used

virtually anywhere in homes, schools, hospitals, motels and a broad variety of other commercial or industrial installations.

Product Specications

Construction:

Radiant Ceiling Panels shall be made of highest quality steel casing.

Front panel shall be painted with textured powder coated nish. Electric Resistance element is xed between dielectric material and

insulation. Two inches of insulation is compressed to one inch by back

panel to minimize upward heat loss and radiant efciency. Radiant panels shall have 36” pre-wired exible cable for easy installation and

wiring connections.

Installation:

CP Series shall be designated as 2x2 or 2x4 size. All panels are 1”

thick. The size shall be nominal dimension to be manufactured to t drop ceiling systems. Standard units will t regular “T” Bar frame.

For regular or trim line or other frame sizes, special construction is required. RCP Series shall be used in recess mounting applications. RCP Series shall be 2” less in width to recess between nominal 24” center ceiling joists. RCP Series shall be complete with recess frame

for nished construction.

Accessories:

Surface mounting frames shall be optional for surface mounting the CP

Series, and are Aluminum mill nish. Frames can be painted white to

match panel.

Options:

Silk-screening the exposed surface to match ceiling tiles is available, as well as silicone sealed metal parts for high humidity applications.

Manufactured in U.S.A.

CP Series - “T” Bar & Surface Mounted RCP Series - Frame in Ceiling Mounted

UPC#

686334

458719 CP805

458733 CP705 2 277 458740 CP807

458764 CP707 3 277

458771 CP802

458795 CP702 .9 277 458801 CP803

458825 CP703 1 277 459105 SF400 Surface Frame for 2’ x 4’ Panels (CP only) 10 lb. 182 459099 SF200 Surface Frame for 2’ x 2’ Panels 6 lb. 144

MODEL WATTS BTU's AMPS VOLTS WT LIST

Dimensions: 2' x 4' (Nominal) x 1"

500 1707

750 2560

Dimensions: 2' x 2' (Nominal) x 1"

250 853

375 1280

2 208

20 lb. 412458726 CP125 4.2/2.1 120/240

4 208

20 lb. 425458757 CP127 6.3/3.1 120/240

1 208

13 lb. 270458788 CP122 2.1/1.0 120/240

2 208

13 lb. 327458818 CP123 3.1/1.6 120/240

UPC#

686334

458832 RCP805

458856 RCP705 2 277 458863 RCP807

458887 RCP707 3 277

458894 RCP802

458917 RCP702 .9 277 458924 RCP803

458948 RCP703 1 277

MODEL WATTS BTU's AMPS VOLTS WT LIST

Dimensions: 2' x 4' (Including Recessing Frame)

2 208

500 1707

4 208

750 2560

Dimensions: 2' x 2' (Including Recessing Frame)

1 208

250 853

2 208

375 1280

International Models

UPC#

686334

MODEL WATTS BTU's AMPS VOLTS WT LIST

Dimensions: 2' x 4' (Nominal) x 1"

471039 CP2205i 420 1434 1.9 220 471046 CP125i 500 1707 4.2/4.1 120/240 471053 CP2207i 630 2150 2.9 220 471060 CP127i 750 2560 6.3/3.1 120/240

Dimensions: 2' x 2' (Nominal) x 1"

471077 CP2202i 210 717 0.95

471084 CP122i 250 853

2.1/1.0 120/240

0.9 277

471091 CP2203i 315 1075 1.4 220

471107 CP123i 375 1280

3.1/1.6 120/240

1.4 277

20 412

20 425

13 270

13 327

UPC#

686334

MODEL WATTS BTU's AMPS VOLTS WT LIST

Dimensions: 2' x 4' (Including Recessing Frame)

471114 RCP2205i 420 1434 1.9 220 471121 RCP125i 500 1707 4.2/4.1 120/240 471138 RCP2207i 630 2150 2.9 220 471145 RCP127i 750 2560 6.3/3.1 120/240

Dimensions: 2' x 2' (Including Recessing Frame)

471152 RCP2202i 210 717 0.95 220 471169 RCP122i 250 853 2.1/1.0 120/240 471176 RCP2203i 315 1075 1.4 220 471183 RCP123i 375 1280 3.1/1.6 120/240

30 lb. 585458849 RCP125 4.2/2.1 120/240

30 lb. 646458870 RCP127 6.3/3.1 120/240

19 lb. 393458900 RCP122 2.1/1.0 120/240

19 lb. 493458931 RCP123 3.1/1.6 120/240

585

646

393

493

Page 38

CVX Series Radiant Cove Ceiling Heater

Manufactured in U.S.A.

Product Description

Cove Heaters have a subtly contoured concave surface with a saw-tooth prole. The concave parabolic face plate

performs a two-fold function: (1) it focuses the infrared rays and (2) directs the heat downward along cold perimeters and toward the center of the room. The sawtooth surface design increases the radiating surface area by 45%, thereby increasing the comfort level of the room faster and insuring more rapid recovery from heat losses.

Product Specications

Furnish and install Electric Cove Heaters where specied. The heaters shall be constructed of .962” thick Aluminum. The heater surface shall be concave in contour and saw-tooth in prole. The nish shall be of powder coat white nish.

The heaters shall be available in ratings from 450 through 1250 Watts, at 120, 240, 208 and 277 Volts. The heating element shall be of Nichrome wire, embedded in Magnesium Oxide powder, enclosed and sealed in Aluminum metal tubing. The heater shall be listed by ETL and the elements shall be supplied with a one year limited warranty.

Standard Models

UPC#

686334

457583 CV4512X 450 457590 CV45X 450 2 240 457606 CV45YX 450 2.0 208 457613 CV4527X 450 2 277 457620 CV6012X 600 457637 CV60X 600 3 240 457644 CV60YX 600 3 208 457651 CV6027X 600 2 277 457668 CV7512X 750 457675 CV75X 750 3 240 457682 CV75YX 750 3.6 208 457699 CV7527X 750 3 277 457705 CV9012X 900 457712 CV90X 900 4 240 457729 CV90YX 900 4 208 457736 CV9027X 900 3 277 457743 CV10012X 1000 457750 CV100X 1000 4 240 457767 CV100YX 1000 5 208 457774 CV10027X 1000 4 277 457781 CV11012X 1100 457798 CV110X 1100 5 240 457804 CV110YX 1100 5 208 457811 CV11027X 1100 4.0 277 457828 CV12512X 1250 457835 CV125X 1250 5 240 457842 CV125YX 1250 6.0 208 457859 CV12527X 1250 5 277

471190 CV4522Xi 471206 CV45Xi 1.9 240 471213 CV6022Xi 471220 CV60Xi 2.5 240 471237 CV7522Xi 471244 CV75Xi 3.1 240 471251 CV9022Xi 471268 CV90Xi 3.8 240 471275 CV10022Xi 471282 CV100Xi 4.2 240 471299 CV11022Xi 471305 CV110Xi 4.6 240 471312 CV12522Xi 471329 CV125Xi 5.2 240

MODEL WATTS BTU's AMPS VOLTS LENGTH W T. LIST

4 120

1536

5.0 120

2048

6 120

2560

8 120

3072

8 120

3413

9 120

3754

10 120

4266

International Models

450 1536

600 2048

750 2560

900 3072

1000 3413

1100 3754

1250 4266

2.0 220

2.7 220

3.4 220

4.1 220

4.5 220

5.0 220

5.7 220

42” 7 lb. 207

60” 10 lb. 258

72” 13 lb. 285

84” 14 lb. 322

96” 17 lb. 335

108” 19 lb. 373

120” 21 lb. 412

42” 7 207

60” 10 258

72” 13 285

84” 14 322

96” 17 335

108” 19 373

120” 21 412

Accessories & Dimensions

UPC#

686334

457927 CVCBX Ceiling Bracket* 1/2 lb. 14

457866 CVB42X

457873 CVB60X 60” Blank Section 8 lb. 70

457880 CVB84X

457912 CVSP Aerosol Touch-up Paint 1 lb. 44

MODEL DESCRIPTION WT. LIST

42” Blank Section 6 lb. 48

84” Blank Section 12 lb. 94

* Order 2 for units up to 72” Order 3 for units over 72”

Page 39

3000 Series Midsized Commercial Fan Forced Wall Heater - Multiple Wattage

Features

• Wattage selectable at time of installation.

• Models shipped wired to highest wattage.

• Approved for horizontal mounting - right or left discharge.

• Fan purge circuit.

• Disconnect switch.

• Drywall depth embossments on back can.

• 18 gauge powder coated steel & extruded Aluminum front.

• Manual reset thermal limit.

• Steel block n element.

• Propeller style fan blade: 1060 RPM motor; 100 CFM.

Approved for

wall or ceiling

installation

Manufactured in U.S.A.

• Weight 6 lbs.

• Rough in dimensions: 9-1/4” Wide x 12-1/8” High x 3-5/8” Deep.

• Grill dimensions: 10” Wide x 13-1/8” High.

Standard Models

UPC#

686334

TAMPERPROOF IN-BUILT DOUBLE POLE THERMOSTAT (50º - 90º TEMPERATURE RANGE)

996211 E3055T2DWB 750 or 1500 5120 120 12.5 298

996228 E3058T2DWB 900 or 1800 6143 120 15.0

996259 F3052T2DWB 1000 or 2000 6826 208 8.3

945691 F30522T2DWB

996280 H3052T2DWB 750 or 1000 - 1500 or 2000 6826 208 / 240 8.3 298

945721 H30522T2DWB

996310 G3052T2DWB 2000 6826 277 7.2 302

996068 E3055TDWB 750 or 1500 5120 120 12.5 280

996075 E3058TDWB 900 or 1800 6143 120 15.0

996105 F3052TDWB 1000 or 2000 6826 208 8.3

945639 F30522TDWB

996136 H3052TDWB 750 or 1000 - 1500 or 2000 6826 208 / 240 8.3 280

945660 H30522TDWB

996167 G3052TDWB 2000 6826 277 7.2 282

MODEL SELECTABLE INSTALLATION WATTAGE

500 or 750 or 1000 or 1250

or 1500 or 1750 or 2250

500 or 750 or 1000 or 1250

or 1500 or 1750 or 2250

TAMPERPROOF IN-BUILT SINGLE POLE THERMOSTAT (50º - 90º TEMPERATURE RANGE)

500 or 750 or 1000 or 1250

or 1500 or 1750 or 2250

500 or 750 or 1000 or 1250

or 1500 or 1750 or 2250

MAX

BTU’s AMPS

7680 208 10.8 344

7680 240 9.4 342

7680 208 10.8 325

7680 240 9.4 311

VOLTS

MAX

LIST

296

282

Accessories

UPC#

686334

996945 305EX8 1” EXTENDER 39

996938 305EX16 2” EXTENDER 40

996921 305EX32 4” SURFACE MOUNT FRAME 45

Note: Please see page 60 for custom color availability - add 10% to net heater cost.

MODEL DESCRIPTION LIST

Page 40

3320 Series Commercial Fan Forced Wall Heater

• Disconnect switch. • Built-In tamper proof thermostat.

• Automatic fan delay circuit.

• Powder coated 18 gauge steel grill with extruded Aluminum front frame.

• Automatic reset thermal limit.

• Steel block n element.

• Vane axial fan blade: 600 RPM motor; 175 CFM

• Rough-in dimensions: 14-3/16” Wide x 19-7/16” High x 4” Deep

• Grill dimensions: 15-29/32” Wide x 20-27/32” High

Furnish and install Heavy-Duty Forced Air wall heaters, where specied. The heaters

shall be constructed of a heavy 18 gauge steel housing with an extruded Aluminum frame. The rough-in dimensions are 19-7/16” High x 14-3/16” Wide x 4” Deep. The units shall be available in ratings from 750 to 4800 Watts at 240, 208, and 277 Volts.

Manufactured in U.S.A.

Standard Models

UPC#

686334

IN-BUILT SINGLE POLE TAMPERPROOF THERMOSTAT (50º - 90º TEMPERATURE RANGE)

FOR DOUBLE POLE THERMOSTAT REPLACE “T” IN MODEL NUMBER WITH “T2” -- Add $50 382052 E3321TD-RP 750 2560 381994 E3322TD-RP 1000 3413 8.3 380881 E3323TD-RP 1500 5120 12.5 638 380935 F3326TD-RP 4000 13800 381024 F3327TD-RP 4800 16560 23 681 380942 HF3323TD-RP 1500 / 1125 5120 / 3840 380959 HF3324TD-RP 2000 / 1500 6284 / 5120 8.3 / 7.2 27 380966 HF3325TD-RP 3000 / 2250 10350 / 7763 12.5 /10.8

381031 H3327TD-RP 4800 16560 240 20 674 380980 G3323TD-RP 1500 5120 380997 G3324TD-RP 2000 6284 7.2 27 381000 G3325TD-RP 3000 10350 10.8

381048 G3327TD-RP 4800 16560 17.3 667 398077 J3326TD-RP 4000 13800 398091 J3327TD-RP 4800 16560 13.33 820 398084 K3326TD-RP 4000 13800 398107 K3327TD-RP 4800 16560 11.57 820

396424 M3324TD-RPi 3360/1680 11468/5734 396437 M3325TD-RPi 4032/2016 13761/6881 18.3/9.16

MODEL WAT TS BTU’s VOLTS AMPS

International Models

The heaters shall have a low-speed 600 RPM, 4-pole motor which drives a vane axial

blower to deliver a quiet 175 CFM of down ow air. The heating element shall be

WT.

LIST

LBS.

120

208

240 /

208

277

208

240

220

6.25

19.2 648

6.2 / 5.4

4.1 26

11.11

9.64 780

15.3/7.64

637

648

29380973 HF3326TD-RP 4000 / 3000 13800 / 10350 16.7/14.4

647

29381017 G3326TD-RP 4000 13800 14.4

780

27 648

Features

Product Specications

of the sealed tubular type with large, parallel steel ns

for quick heat transfer. Unit shall have as a standard, a thermal overload cut-off for added safety, fan delay switch and built-in tamper proof thermostat which shall be calibrated to provide a range of 55°F. to 85°F. and manual disconnect switch. Optional accessories shall include a surface and semirecess mounting adapter. All heaters shall be listed by ETL. The heating element shall be supplied with a manufactures 1-year limited warranty.

Accessories

UPC

686334

377850 BOX 3310

378451 3320EX33

382939 3320EX16

MODEL DESCRIPTION TYPE

----- Sufx - HD

Additional Rough-in

Box

4” Surface Mounting

Frame

2” semi recess

extender

16 Gauge Steel

Heavy Duty Grill

Installed

Factory

Installed

Field

WT. lbs.

3 99

1 90

1 77

2 99

LIST

4400 Series Low Prole Commercial Fan Forced Wall Heater - With Wall Box

• Powder coated 20 gauge steel front with extruded Aluminum frame.

• Manual reset

Manufactured in U.S.A.

thermal limit.

• Finned tubular steel element.

• Propeller style fan blade - 2200 RPM/70 CFM

• Weight 9 lbs.

• Rough in dimensions:

UPC

686334 BTU’S

328326 F4420T2RP 208 2000 6826 9.6 328333 HF4475T2RP 328340 HF4410T2RP 1000 / 750 3413 / 2560 4.2 / 3.6 328357 HF4415T2RP 1500 / 1125 5120 / 3840 6.3 / 5.4 328364 HF4420T2RP 2000 / 1500 6826 / 5120 8.3 / 7.2

328371 E4475TRP 328388 E4410TRP 1000 3413 8.33 328395 E4415TRP 1500 5120 12.5 328401 F4420TRP 208 2000 6826 9.6

MODEL VOLTS WATTS

DOUBLE POLE IN-BUILT THERMOSTAT (RANGE 50º - 90º F)

SINGLE POLE IN-BUILT THERMOSTAT (RANGE 50º - 90º F)

14-1/2” Wide x 7-1/8” High x 3-1/2” Deep

• Grill dimensions:16-7/8” Wide x 8” High

• Unit not approved for ceiling mount applications.

• Unit can be positioned to allow left, right or top discharge.

Note: Please see page 60 for custom color availability - add 10% to net heater cost.

UPC

686334 LBS.

329910 4400EX8 1” SEMI RECESSING EXTENDER 2 44 329903 4400EX16 2” SEMI RECESSING EXTENDER 3 47 329897 4400EX32 4” SURFACE MOUNTING FRAME 4 49 328449 4300PB WALL PLATE ADAPTOR (OD 21.5”x12.25”) 1 32

MODEL DESCRIPTION

Standard Models

750 / 562 2560 / 1920 3.1 / 2.7

240/208

750 2560 6.25

120

Accessories

MAX

AMPS LIST

315

296

WT.

LIST

Page 41

3420 & 3450 Series Heavy-Duty Fan Forced Wall Heaters

Features

• Powder coated bar stock steel tamper proof grille, with extruded Aluminum frame and 16 gauge housing.

• In-Built double pole tamper proof thermostat with a 40°-110°F temperature range & positive off; 3 phase heaters have 3 pole thermostat for positive off position.

• Manual reset thermal limit switch.

• Corrosion resistant steel tubular element with brazed steel ns.

• Permanently lubricated, unit bearing, shaded pole motor with impedance protection.

• Propeller type fan blade:

Note: Wall box required - may be ordered early for rough in purposes.

Manufactured in U.S.A.

1400 RPM motor; 245 CFM

• Factory installed options:

- contactors (3420 & 3450 series)

- circuit breakers (3450 series)

- control transformers (3450 series)

Standard Models

HEATER WALL BOX

UPC 686334 MODEL UPC 686334 MODEL

SERIES 3420 - ROUGH-IN DIMENSIONS: 19-3/8” H x 14-1/4” W x 4-1/4” D

GRILL DIMENSIONS: 21-15/32” H x 17-7/16” W

691130 F3422T

WATTS BTU’s VOLTS PH AMPS WT.

2000 6826

208

9.6

HEATER

LIST

957 691178 G3422T 277 7.2 384629 J3422T 384643 K3422T 240 4.8

2000 6826

691239 F3423T 691314 H3423T 240 12.5

3000 10239

208

5.6

14.4

1123 1280

981 1138

691277 G3423T 277 10.8 968 1125 384636 J3423T 384650 K3423T 240 7.3 691338 F3424T

691574 Box 3420

691369 G3424T 277 14.4

3000 10239

4000 13652 691406 J3424T 208 691413 K3424T 240 9.6 691437 F3425T 691512 H3425T 240 20.8 691482 G3425T 277 18.1

5000 17065 691536 J3425T 208 691567 K3425T 240 12.0

208

8.3

19.2

11.1

1123 1280

41 lbs.

1001 1158691383 H3424T 240 16.7

1123 1280

13.9

1136 1293

1234 1391

WALL

BOX LIST

157

TOTAL

LIST

1114691192 H3422T 240 8.3

HEATER WALL BOX

UPC 686334 MODEL UPC 686334 MODEL

SERIES 3450 - ROUGH-IN DIMENSIONS: 23-1/16” H x 14-1/4” W x 4-1/4” D

GRILL DIMENSIONS: 25-1/32” H x 17-7/16” W

691611 F3452T

WATTS BTU’s VOLTS PH AMPS WT.

2000 6826

208

9.6

312295 G3452T 277 7.2 384667 J3452T 384681 K3452T 240 4.8

2000 6826

687683 F3453T

3000 10239

208

5.6

14.4

1 312288 G3453T 277 10.8 384674 J3453T 384698 K3453T 240 7.3 691789 F3454T

691918 Box 3450

3000 10239

691819 H3454T 240 16.7 311991 G3454T 277 14.4

4000 13652 691857 J3454T 208 316651 K3454T 240 9.6 312981 F3455T

208

8.3

19.2

11.1

10.4

1 312387 G3455T 277 18.1 691901 J3455T 208 313070 K3455T 240 12.0

5000 17065

13.9

Note: Please see page 60 for custom color availability - add 10% to net heater cost. Note: Products listed in this section are custom built and subject to 100% cancellation/restocking charges.

55 lbs.

LIST

WALL

BOX LIST

TOTAL

HEATER

1227

1395 1577

1242 1424691772 H3453T 240 12.5

1395 1577

181

1273 1455

1395 1577

1401 1583312134 H3455T 240 20.8

1537 1719

LIST

1409691680 H3452T 240 8.3

Page 42

3420 & 3450 Series Heavy-Duty Fan Forced Wall Heaters

Product Specications

Contractor shall supply and install heavy duty wall mounted forced air electric heaters of the

wattage, voltage and phase as specied. The heater shall so be designed to provide an even

distribution of heated air to the space to be heated by drawing return air in the peripheral area of the heater across and through the element which shall then be discharged from the center section of

the heater by means of an electric motor and axial ow fan blade. Heaters shall be recessed type to extend no more than 1-1/2” from the nished wall or surface mounted to extend no more than 5-3/4” from the nished wall or semi-recessed type to extend no more than 3-1/2” from nished wall or semi-recessed type to extend no more than 2-1/2” from nished wall.

ENCLOSURE: Heater front shall withstand 10.8 ft. lbs. (324 poundals) impact and 400 lbs. static force applied to an 8 sq. in. area at center grille location with less than 1/16” permanent distortion. The combination return and supply grille assembly shall be constructed of 1/16” x 3/8” rounded edge horizontal steel louvers which shall be spaced for maximum opening of 1/4”. Louvers shall be welded at every intersection to three evenly spaced 1/16” diameter vertical members and completely framed in a heavy gauge natural anodized Aluminum extrusion. Front assembly shall be attached to the chassis by hidden tamper-resistant (Allen-head) machine screws. All other parts shall be 16 gauge steel

Zinc coated, both sides nished in a high gloss or bronze colored baked powder coat nish.

MOTOR:

Motor shall be a permanently lubricated unit bearing, totally enclosed shaded pole type with impedance protection. Motors shall operate at no more than 1400 RPM and shall be same voltage as the heater. A protective shield shall surround the motor to separate return air from heated air.

PERFORMANCE:

Heaters shall have a rating of 245 CFM at 660 F.P.M. with a maximum temperature rise of 73°F.

ELEMENTS:

Element assemblies shall consist of two or three corrosion resistant steel sheathed type elements

mechanically bonded to common corrosion resistant steel ns. Each sheathed element shall consist

of helically coiled Nickel Chromium alloy resistant wire completely embedded in and surrounded by Magnesium Oxide, enclosed and wedged into corrosion resistant steel sheaths. Elements shall have 2” cold conductor pins extending into the sheath and shall have a density of no more than 60 Watts per inch.

THERMAL OVERLOAD:

APPROVAL:

Heaters shall be ETL Listed.

OPTIONAL CONTROL SYSTEMS:

Heaters shall be operated from wall-mounted, line voltage, heavy-duty (tamper-proof) thermostats. Heaters with built-in, pre-wired contactors shall be operated from wall-mounted, line voltage, pilot duty (tamper-proof) thermostats. Heaters built with, pre-wired contactors (and control transformers) shall be operated from wall-mounted, pilot duty (24V) or (120V) wall-mounted tamper-proof thermostats. Heaters shall be controlled by integrally mounted thermostats. Thermostats shall be heavy-duty, hydraulic type with a range of 40°F to 80°F and with remote sensing bulb placed in the return air. Thermostats shall be electrically rated at least 125% of heater rating. Thermostats

Page 43

3420 & 3450 Series Heavy-Duty Fan Forced Wall Heaters

Product Specications

shall be heavy-duty, hydraulic type with a range of 40°F to 80°F and with remote sensing bulb placed in the return air. Thermostats shall be electrically rated at least 125% of heater rating. Thermostats shall also act as a disconnect by breaking all ungrounded conductors in the OFF position. (Thermostat control knob shall be covered by a 16 gauge tamper-proof access plate to prevent adjustment by unauthorized personnel.)

CONTACTORS:

Where required, heaters shall be equipped with heavy-duty, denite purpose contactors with ame

path separators and dust covers. Contactors shall cycle all ungrounded conductors. Contactors shall have holding coils (of the same voltage as the heater) or (120 Volts) or (24 Volts).

CONTROL TRANSFORMERS: Heater shall be equipped with a Class 2 control transformer, sealed rating of 20 VA, to supply control circuits of (24 Volts) or (120 Volts). (120 Volt secondaries not available in single phase heaters over 3 KW).

CIRCUIT BREAKERS (3450 Series Only):

Heaters shall be equipped with built-in circuit breakers in order to allow the heaters to be supplied from feeder taps. A separate switch providing a positive off for control circuits shall be included where required. Circuit breakers and control switches shall be arranged so that all line side conductors will be separately enclosed when heater front is removed for servicing so that no current carrying parts are accessible without the use of additional tools.

Field Installed Accessories

Units with transformers must have a contactor. A control transformer with 120V secondary is available on all 3-phase

models, 208V/240V 1-phase units up to 3KW, and up to 4 KW on 277V. All heaters must be installed with a wall box.

MODEL DESCRIPTION

Sufx - R Contactor with Coil same as heater YES YES

Sufx - R1 Contactor with 24V Coil YES YES

Sufx - R2 Contactor with 120V Coil YES YES

Sufx - C Circuit Breakers - all models NO YES 340

Sufx - A1 Control Transformers With 24V Secondary NO YES 100

Sufx - A2 Control Transformers With 120V Secondary NO YES 134

UPC#

686334

691949 3450EX34 4” Surface Mounting Sleeve 6 lb.

691932 3450EX16 2” Semi-Recessing Sleeve 4 lb.

MODEL DESCRIPTION W T. LIST

SERIES OPTIONS

3420 3450

LIST

182

101

691925 3450EX8 1” Semi-Recessing Sleeve 4 lb.

691604 3420EX34 4” Surface Mounting Sleeve 5 lb.

691598 3420EX16 2” Semi-Recessing Sleeve 4 lb.

691581 3420EX8 1” Semi-Recessing Sleeve 3 lb.

101

Page 44

3310 Series Fan Forced Wall Heater - Without Summer Fan Switch

Features

• Powder coated 18 gauge steel front.

• Automatic reset thermal limit.

• Vane axial fan blade: 600 RPM / 175 CFM.

• Rough in dimensions: 14-3/16” Wide x 19-15/16” High x 4” Deep.

• Grill dimensions: 15-3/8” Wide x 20-9/64” High.

• Steel block n element.

• Weight 22 lbs.

• Units with dual wattage, factory wired to highest wattage.

• Wattage selectable at time of installation on some models.

Standard Models

MODELS WITH IN-BUILT DOUBLE POLE THERMOSTAT (50º - 90º F TEMPERATURE RANGE)

IVORY WHITE

UPC 686334 326346 E3312T2RP 326483 E3312T2RPW 1000 3413

326353 E3313T2RP 326490 E3313T2RPW

326360 F3316T2RP 326506 F3316T2RPW 4000 13648 326377 F3317T2RP 326513 F3317T2RPW 4800 16380 23 509

326407 HF3315T2RP 326544 HF3315T2RPW

326414 HF3316T2RP 326551 HF3316T2RPW

326421 H3317T2RP 326568 H3317T2RPW 4800 16380 240 20.0 520 326438 G3314T2RP 326575 G3314T2RPW 2000 6826 326445 G3315T2RP 326582 G3315T2RPW 3000 10240 10.8 326452 G3316T2RP 326599 G3316T2RPW 4000 13648 14.4 326469 G3317T2RP 326605 G3317T2RPW 4800 16380 17.3 512

IVORY

MODEL

UPC

686334

WHITE

MODEL

WATTS

1500 5120 12.5

750 2560 6.25

3000 / 2250 10240

1500 / 1125 5120 6.2 / 5.4 4000 / 3000 13648 16.8 / 14.4 2000 / 1500 6826 8.3 / 7.2

MAX

BTU’s

VOLTS AMPS LIST

120

208

240 / 208

277

Manufactured in U.S.A.

8.3 488

19.2 496

12.5 / 10.8

7.2

495

496

495

MODELS WITH IN-BUILT SINGLE POLE THERMOSTAT (50º - 90º F TEMPERATURE RANGE)

382526 E3312TRP 382618 E3312TRPW 1000 3413

380652 E3313TRP 384162 E3313TRPW

379946 F3316TRP 384186 F3316TRPW 4000 13648 380300 F3317TRP 384193 F3317TRPW 4800 16380 23

380560 HF3315TRP 382229 HF3315TRPW

379984 HF3316TRP 382236 HF3316TRPW

380317 H3317TRP 382243 H3317TRPW 4800 16380 240 20.0 486 329873 G3314TRP 384261 G3314TRPW 2000 6826

328500 G3316TRP 328524 G3316TRPW 4000 13648 14.4 379179 G3317TRP 384292 G3317TRPW 4800 16380 17.3 480

MODELS WITHOUT AN IN-BUILT THERMOSTAT

326629 E3312RP 326766 E3312RPW 1000 3413

326636 E3313RP 326773 E3313RPW

328531 F3316RP 326780 F3316RPW 4000 13648 326650 F3317RP 326797 F3317RPW 4800 16380 23 455

326681 HF3315RP 326827 HF3315RPW

326698 HF3316RP 326834 HF3316RPW

326704 H3317RP 326841 H3317RPW 4800 16380 240 20.0 465 326711 G3314RP 326858 G3314RPW 2000 6826

326735 G3316RP 326872 G3316RPW 4000 13648 14.4 326742 G3317RP 326889 G3317RPW 4800 16380 17.3 457

1500 5120 12.5

750 2560 6.25

3000 / 2250 10240

1500 / 1125 5120 6.2 / 5.4 4000 / 3000 13648 16.8 / 14.4 2000 / 1500 6826 8.3 / 7.2

1500 5120 12.5

750 2560 6.25

3000 / 2250 10240

1500 / 1125 5120 6.2 / 5.4 4000 / 3000 13648 16.8 / 14.4 2000 / 1500 6826 8.3 / 7.2

120

208

240 / 208

277

120

208

240 / 208

277

8.3

19.2 463

12.5 / 10.8

7.2

8.3

19.2 442

12.5 / 10.8

7.2

455

476

463

462328494 G3315TRP 328517 G3315TRPW 3000 10240 10.8

432

442

441326728 G3315RP 326865 G3315RPW 3000 10240 10.8

Page 45

3310 Series Fan Forced Wall Heater - With Summer Fan Switch

Features

• Powder coated 18 gauge steel front.

• Automatic reset thermal limit.

Manufactured in U.S.A.

• Steel block n element.

• Weight 22 lbs.

• Vane axial fan blade: 600 RPM / 175 CFM.

• Grill dimensions: 15-3/8” Wide x 20-9/64” High.

• Rough in dimensions: 14-3/16” Wide x 19-15/16” High x 4” Deep.

• Units with dual wattage, factory wired to highest wattage.

• Wattage selectable at time of installation on some models.

Product Specications

Typical Specications: Furnish and install Electric Forced Air Heaters where specied. The heaters shall be constructed of a heavy gauge steel housing. The rough-in dimensions are 14-3/16” Wide x 19-5/16” High x 4” Deep. The nish

shall be powder coated paint in ivory or white color. The units shall be available in ratings from 750 through 4800 Watts. The heaters shall have a low speed 600 RPM

motor which drives a vane axial blower to deliver a quiet 175 CFM of down ow air. The heating element shall be of the sealed block n type with large, parallel steel ns for quick heat transfer. Unit shall have a standard thermal

overload cutoff for added safety, a fan switch for fan only operation, and is available with a single pole, or double pole built-in thermostat, or no thermostat. The in-built thermostat shall be calibrated to provide a range of 50 degrees F. to 90 degrees F. All heaters shall be listed by ETL. The heating element shall be supplied with a manufacturer’s 1 year limited warranty.

Standard Models

MODELS WITH IN-BUILT DOUBLE POLE THERMOSTAT (50º - 90ºF TEMPERATURE RANGE)

IVORY WHITE

UPC

686334 686334

326063 E3312T2SRP 326209 E3312T2SRPW 1000 3413

326070 E3313T2SRP 326216 E3313T2SRPW

326087 F3316T2SRP 326223 F3316T2SRPW 4000 13648 326094 F3317T2SRP 326230 F3317T2SRPW 4800 16380 23 521

326124 HF3315T2SRP 326261 HF3315T2SRPW

326131 HF3316T2SRP 326278 HF3316T2SRPW

326148 H3317T2SRP 326285 H3317T2SRPW 4800 16380 240 20.0 530

IVORY

UPC

WHITE

WATTS MAX BTU’s VOLTS AMPS LIST

8.3

1500 5120 12.5

750 2560 6.25

3000 / 2250 10240

1500 / 1125 5120 6.2 / 5.4 4000 / 3000 13648 16.8 / 14.4 2000 / 1500 6826 8.3 / 7.2

120

208

240 / 208

19.2 509

12.5 / 10.8

498

509

MODELS WITH IN-BUILT SINGLE POLE THERMOSTAT (50º - 90ºF TEMPERATURE RANGE)

382571 E3312TSRP 382595 E3312TSRPW 1000 3413

379618 E3313TSRP 384018 E3313TSRPW

377713 F3316TSRP 384025 F3316TSRPW 4000 13648 377782 F3317TSRP 384032 F3317TSRPW 4800 16380 23 488

377607 HF3315TSRP 384070 HF3315TSRPW

377690 HF3316TSRP 384087 HF3316TSRPW

377768 H3317TSRP 384094 H3317TSRPW 4800 16380 240 20.0 497

International Models

---- ---- 396480 M3315T2SRPWi

---- ---- 396493 M3316T2SRPWi

1500 5120 12.5

750 2560 6.25

3000 / 2250 10240

1500 / 1125 5120 6.2 / 5.4 4000 / 3000 13648 16.8 / 14.4 2000 / 1500 6826 8.3 / 7.2

3360 11468 1680 5734 7.64 4032 13761 18.33 2016 6881 9.16

120

208

240 / 208

220

8.3

19.2 476

12.5 / 10.8

15.27

Note: Fan switch not available on 277V models. 277V models are available without a fan switch on previous page.

Accessories - All Models

IVORY WHITE

UPC

686334 686334

377850 BOX3310 377850 BOX3310 ADDITIONAL BACK CAN 329958 3310EX33R 329965 3310EX33WR SURFACE MOUNTING FRAME 85

MODEL

SUFFIX D DISCONNECT SWITCH Factory Installed 108

UPC

MODEL

DESCRIPTION ACCESSORY TYPE LIST

Field Installed

467

476

509

Page 46

3200 Series Midsized Fan Forced Wall Heater - With Wall Box

Features

• Units have white powder coat nish.

• Approved for horizontal mounting - right or left discharge.

• Drywall depth embossments on back can.

• Powder coated 18 gauge steel front.

• Manual reset thermal limit.

• Finned tubular steel element.

• Weight 6 lbs.

• Propeller style fan blade: 2200 RPM / 70 CFM.

• Optional eld installed In-Built thermostat.

• Rough in dimensions: 9-1/4” Wide, 12-1/8” High, 3-5/8” Deep.

• Grill dimensions: 9-25/32” Wide, 13” High.

“TWO WIRE INSTALLATION”

Standard Models

Manufactured in U.S.A.

UPC

686334 BTU’S

383462 F3220T2RPW 208 2000 6826 9.6

383479 H3275T2RPW 240 750 2560 3.1

383486 HF3210T2RPW

383493 HF3215T2RPW 1500 / 1125 5120 / 3840 6.3 / 5.4

383509 HF3220T2RPW 2000 / 1500 6826 / 5120 8.3 / 7.2

383516 HF3222T2RPW 2250 / 1688 7680 / 5762 9.4 / 8.1

International Models - BUILT-IN DOUBLE POLE (POSITIVE OFF) THERMOSTAT 50° - 90° F RANGE

396387 M3210T2RPWi

396394 M3215T2RPWi 1260 4300 5.7

396400 M3220T2RPWi 1680 5734 7.6

396417 M3222T2RPWi 1890 6451 8.6

Standard Models - BUILT-IN SINGLE POLE (POSITIVE OFF) THERMOSTAT 50° - 90° F RANGE

383523 E3275TRPW

383547 E3215TRPW 1500 5120 12.5

383554 E3275RPW

383561 E3210RPW 1000 3413 8.33

383578 E3215RPW 1500 5120 12.5

383585 F3220RPW 208 2000 6826 9.6

383592 H3275RPW 240 750 2560 3.1

383608 HF3210RPW

383615 HF3215RPW 1500 / 1125 5120 / 3840 6.3 / 5.4

383622 HF3220RPW 2000 / 1500 6826 / 5120 8.3 / 7.2

383639 HF3222RPW 2250 / 1688 7680 / 5762 9.4 / 8.1

MODEL VOLTS WATTS

BUILT-IN DOUBLE POLE (POSITIVE OFF) THERMOSTAT 50° - 90° F RANGE

1000 / 750 3413 / 2560 4.2 / 3.6

240/208

840 2867 3.8

220

750 2560 6.25

120

NO BUILT-IN THERMOSTAT

750 2560 6.25

120

1000 / 750 3413 / 2560 4.2 / 3.6

240/208

MAX

AMPS LIST

254

238383530 E3210TRPW 1000 3413 8.33

219

FIELD INSTALLED COMPONENTS

UPC

686334

383646 32T1

383653 32T2

MODEL DESCRIPTION LIST

Single Pole thermostat with positive off

for 120V units 50o - 90o F

Double Pole thermostat with positive off

for 240/208V units 50o - 90o F

Accessories

SURFACE MOUNTED EXTENDERS & FRAMES

WHITE

UPC

686334

996976 303EX8RW 1” EXTENDER 39

996969 303EX16RW 2” EXTENDER 40

996952 303EX32RW 4” SURFACE MOUNT FRAME 46

MODEL

DESCRIPTION LIST

Page 47

4300 Series Low Prole Fan Forced Wall Heater - With Wall Box

Features

• Available in ivory or white.

• Powder coated 20 gauge steel front.

• Manual reset thermal limit.

• Finned tubular steel element.

• Weight 9 lbs.

Manufactured in U.S.A.

• Propeller style fan blade - 2200 RPM / 70 CFM

• Rough in dimensions: 14-1/2” Wide, 7-1/8” High, 3-1/2” Deep

• Grill dimensions: 16-3/4” Wide, 7-5/8” High

• Unit not approved for ceiling mount applications.

• Unit can be positioned to allow left, right or top discharge.

Standard Models

IVORY WHITE

UPC

686334

327695 F4320T2RP 327749 F4320T2RPW 208 2000 6826 9.6 327701 HF4375T2RP 327756 HF4375T2RPW 327718 HF4310T2RP 327763 HF4310T2RPW 1000 / 750 3413 / 2560 4.2 / 3.6 327725 HF4315T2RP 327770 HF4315T2RPW 1500 / 1125 5120 / 3840 6.3 / 5.4 327732 HF4320T2RP 327787 HF4320T2RPW 2000 / 1500 6826 / 5120 8.3 / 7.2

---- ---- 396448 M4375T2RPi

---- ---- 396455 M4310T2RPi 840 2869 3.8

---- ---- 396462 M4315T2RPi 1260 4300 5.7

---- ---- 396479 M4320T2RPi 1680 5733 7.6

327794 E4375TRP 327879 E4375TRPW 327800 E4310TRP 327886 E4310TRPW 1000 3413 8.33 327817 E4315TRP 327893 E4315TRPW 1500 5120 12.5 327824 F4320TRP 327909 F4320TRPW 208 2000 6826 9.6 327831 HF4375TRP 327916 HF4375TRPW 327848 HF4310TRP 327923 HF4310TRPW 1000 / 750 3413 / 2560 4.2 / 3.6 327855 HF4315TRP 327930 HF4315TRPW 1500 / 1125 5120 / 3840 6.3 / 5.4 327862 HF4320TRP 327947 HF4320TRPW 2000 / 1500 6826 / 5120 8.3 / 7.2

327954 E4375RP 328036 E4375RPW 327961 E4310RP 328043 E4310RPW 1000 3413 8.33 327978 E4315RP 328050 E4315RPW 1500 5120 12.5 327985 F4320RP 328067 F4320RPW 208 2000 6826 9.6 327992 HF4375RP 328074 HF4375RPW 328005 HF4310RP 328081 HF4310RPW 1000 / 750 3413 / 2560 4.2 / 3.6 328012 HF4315RP 328098 HF4315RPW 1500 / 1125 5120 / 3840 6.3 / 5.4 328029 HF4320RP 328104 HF4320RPW 2000 / 1500 6826 / 5120 8.3 / 7.2

MODEL

International Models - DOUBLE POLE IN-BUILT THERMOSTAT (RANGE 50° - 90°F)

Standard Models - SINGLE POLE INBUILT THERMOSTAT (RANGE 50° - 90°F)

UPC

686334

DOUBLE POLE IN-BUILT THERMOSTAT (RANGE 50° - 90°F)

NO IN-BUILT THERMOSTAT

MODEL

VOLTS WATTS MAX BTU’s AMPS LIST

750 / 562 2560 / 1920 3.1 / 2.7

240/208

630 2150 2.9

220

750 2560 6.25

120

750 / 562 2560 / 1920 3.1 / 2.7

240/208

750 2560 6.25

120

750 / 562 2560 / 1920 3.1 / 2.7

240/208

245

250

227

206

Accessories

UPC

686334

327657 4300EX8 328456 4300EX8W 1” SEMI RECESSING EXTENDER 2 43

327664 4300EX16 328463 4300EX16W 2” SEMI RECESSING EXTENDER 3 46

327671 4300EX32 328470 4300EX32W 4” SURFACE MOUNTING FRAME 4 49

327688 4300P 328487 4300PW WALL PLATE ADAPTOR (OD 21.5” x 12.25”) 1 31

FIELD INSTALLED

THERMOSTATS

IVORY

MODEL

UPC

686334

329774 43T SINGLE POLE THERMOSTAT 50O - 90O F 1 46

329781 43T2 DOUBLE POLE THERMOSTAT 50O - 90O F 1 52

WHITE

MODEL

ACCESSORY OPTIONS

WT.

LBS.

LIST

Page 48

4800 Series Register Style Fan Forced Wall Heater - With Wall Box

Features

• Units have white powder coat nish.

• Powder coated 20 gauge steel front.

• Manual reset thermal limit.

• Finned tubular steel element.

• Propeller style fan blade - 2200 RPM / 70 CFM.

• Weight 9 lbs.

• Rough in dimensions: 14-1/2” Wide x 7-1/8” High x 3-1/2” Deep.

• Grill dimensions: 16-3/4” Wide x 7-5/8” High.

• Unit not approved for ceiling mount applications.

Manufactured in U.S.A.

• Left discharge only.

Standard Models

UPC

686334 BTU’S

328159 F4820T2RPW 208 2000 6826 9.6

328166 HF4875T2RPW

328173 HF4810T2RPW 1000 / 750 3413 / 2560 4.2 / 3.6

328180 HF4815T2RPW 1500 / 1125 5120 / 3840 6.3 / 5.4

328197 HF4820T2RPW 2000 / 1500 6826 / 5120 8.3 / 7.2

MODEL VOLTS WATTS

DOUBLE POLE IN-BUILT THERMOSTAT (50º - 90º F TEMPERATURE RANGE)

750 / 562 2560 / 1920 3.1 / 2.7

240/208

MAX

AMPS LIST

264

SINGLE POLE IN-BUILT THERMOSTAT (50º - 90º F TEMPERATURE RANGE)

328203 E4875TRPW

328210 E4810TRPW 1000 3413 8.33

328227 E4815TRPW 1500 5120 12.5

328234 F4820TRPW 208 2000 6826 9.6

328241 E4875RPW

328258 E4810RPW 1000 3413 8.33

328265 E4815RPW 1500 5120 12.5

328272 F4820RPW 208 2000 6826 9.6

328289 HF4875RPW

328296 HF4810RPW 1000 / 750 3413 / 2560 4.2 / 3.6

328302 HF4815RPW 1500 / 1125 5120 / 3840 6.3 / 5.4

328319 HF4820RPW 2000 / 1500 6826 / 5120 8.3 / 7.2

120

NO IN-BUILT THERMOSTAT

120

240/208

750 2560 6.25

750 / 562 2560 / 1920 3.1 / 2.7

Accessories

UPC#

686334

MODEL DESCRIPTION WT. LBS. LIST

247

226

328456 4300EX8W 1” SEMI RECESSING EXTENDER 2 43

328463 4300EX16W 2” SEMI RECESSING EXTENDER 3 46

328470 4300EX32W 4” SURFACE MOUNTING FRAME 4 49

328487 4300PW WALL PLATE ADAPTOR (OD 21.5” x 12.25”) 1 31

329774 43T SINGLE POLE THERMOSTAT 50O - 90O F 1 46

329798 48T2 DOUBLE POLE THERMOSTAT 50O - 90O F 1 49

Page 49

3900 Series Hydronic Electric Baseboard Heater

• Permanent mount self contained unit.

• Heating elements are immersed in a heat transferring liquid enclosed

by a Copper tube casing with Aluminum ns.

• Powder coated 12 gauge heavy duty extruded Aluminum housing with junction boxes located on each end of the unit.

• Automatic linear limit.

• Wire guard extends along the entire outlet area of the baseboard.

• Commercial Brown unit has in-built wireway.

• Special colors available, consult factory.

Manufactured in U.S.A.

STANDARD WHITE COMMERCIAL BROWN

UPC

686334 686334

111416 E3904-28 111645 E3904-28C 400 1360 120 3.3 111423 F3904-28 111652 F3904-28C 400 1360 208 1.92 111430 H3904-28 111669 H3904-28C 400/300 1360/1024 240/208 1.6/1.4 111447 G3904-28 111676 G3904-28C 400/300 1360 277/240 1.4 111454 E3906-36 111683 E3906-36C 600 2048 120 5 111461 F3906-36 111690 F3906-36C 600 2048 208 2.9 111478 H3906-36 111706 H3906-36C 600/450 2048/1536 240/208 2.5/2.2 111485 G3906-36 111713 G3906-36C 600/450 2048 277/240 2.2 111492 E3910-48 111720 E3910-48C 1000 3413 120 8.3 111508 F3910-48 111737 F3910-48C 1000 3413 208 4.8 111515 H3910-48 111744 H3910-48C 1000/750 3413/2560 240/208 4.2/3.6 111522 G3910-48 111751 G3910-48C 1000/750 3413 277/240 3.6 111539 E3912-60 111768 E3912-60C 1250 4265 120 10.4 111546 F3912-60 111775 F3912-60C 1250 4265 208 6 111553 H3912-60 111782 H3912-60C 1250/938 4265/3201 240/208 5.2/4.5 111560 G3912-60 111799 G3912-60C 1250/938 4265 277/240 3.6 111577 E3915-72 111805 E3915-72C 1500 5100 120 12.5 111584 F3915-72 111812 F3915-72C 1500 5100 208 7.2 111591 H3915-72 111829 H3915-72C 1500/1125 5100/3825 240/208 6.3/5.4 111607 G3915-72 111836 G3915-72C 1500/1125 5100 277/240 5.4 111614 F3920-96 111842 F3920-96C 2000 6826 208 9.6

111638 G3920-96 111867 G3920-96C 2000/1500 6826 277/240 7.2

MODEL

UPC

MODEL

• Suitable for high altitude applications.

• 1 Year element warranty.

Standard Models

WATTS BTU’S. VOLTS AMPS

HEATER

LENGTH

(IN.)

28 16 350 372

36 22 401 426

48 27 467 495

60 33 531 578

72 41 597 639

96 58 709 763111621 H3920-96 111850 H3920-96C 2000/1500 6826/5100 240/208 8.3/7.2

WT.

(LBS)

WHITE

LIST

BROWN

LIST

Product Specications & Dimensions

The entire heater casing shall be

constructed of 6063 extruded Aluminum.

3.00”

minimum thickness of .100” (12 gauge) Aluminum shall be acceptable. Outlet grill shall cover entire length of air discharge opening and be constructed of steel. All casing and grill construction shall be painted with high quality durable powder coated paint. The heating element shall be high quality

8.50”

Nichrome wire encased in Magnesium Oxide and sealed in copper tube. The heating element shall be sealed in .312” diameter Copper tube and be

1.43

immersed in heat transfer liquid. Aluminum ns

shall be mechanically bonded to the entire heated length of the element for even heat transfer. Linear automatic thermal limit shall

4.10

2.42 WIRE NUT

extend the entire heater length of element and protect heater in case of an over-temperature

1.60

2.1

condition. Optional controls shall be mounted in junction box enclosures at either end of heater. Optional integral thermostat shall be located in junction box with adjustment knob or for tamper-proof operation. Optional disconnect switch shall be mounted in junction box. Optional 120 Volt or air conditioning receptacle shall be mounted in junction box.

Optional installation accessories shall include inside and outside corner sections for complete wall perimeter t. Prole of

corners and grill shall have appearance of heat sections for continuous architectural design. Corner accessories and heater sections shall be secured by alignment pins for easy alignment of multiple heater applications.

TEMPERATURE LIMITING DEVICE

Page 50

3700 Series Architectural Style Electric Baseboard Heater

• Available in white or brown with stainless steel heating element and

aluminum ns.

• Powder coated 12 gauge heavy duty extruded Aluminum housing construction with junction boxes located on each end of the unit.

• An automatic thermal linear limit is used along the entire heated length of the unit.

• Wire guard extends along the entire outlet area of the baseboard.

• Special colors available, consult factory.

Standard Models

STANDARD WHITECOMMERCIAL BROWN

UPC

686334

116008 E3703-024 116435 E3703-024B 375 1275 120 3.1

116015 F3703-024 116442 F3703-024B 375 1275 208 1.8

116022 H3703-024 116459 H3703-024B 375 / 281 1275 / 955 240 / 208 1.6/1.4

116039 G3703-024 116466 G3703-024B 375 / 281 1275 / 955 277 / 240 1.6/1.2

116046 E3705-028 116473 E3705-028B 500 1706 120 4.2

116053 F3705-028 116480 F3705-028B 500 1706 208 2.4

116060 H3705-028 116497 H3705-028B 500 / 375 1706 / 1275 240 / 208 2.1/1.8

116077 G3705-028 116503 G3705-028B 500 / 375 1706 / 1275 277 / 240 1.8/1.6

116084 E3706-036 116510 E3706-036B 600 2040 120 5

116091 F3706-036 116527 F3706-036B 600 2040 208 2.9

116107 H3706-036 116534 H3706-036B 600 / 450 2040 / 1530 240 / 208 2.5/2.2

116114 G3706-036 116541 G3706-036B 600 / 450 2040 / 1530 277 / 240 2.2/1.9

116121 E3707-040 116558 E3707-040B 750 2550 120 6.3

116138 F3707-040 116565 F3707-040B 750 2550 208 3.6

116145 H3707-040 116572 H3707-040B 750 / 563 2550 / 1914 240 / 208 3.1/2.7

116152 G3707-040 116589 G3707-040B 750 / 563 2550 / 1914 277 / 240 2.7.2.6

116169 E3710-048 116596 E3710-048B 1000 3413 120 8.3

116176 F3710-048 116602 F3710-048B 1000 3413 208 4.8

116183 H3710-048 116619 H3710-048B 1000 / 750 3413 / 2550 240 / 208 4.2/3.6

116190 G3710-048 116626 G3710-048B 1000 / 750 3413 / 2550 277 / 240 3.6/3.1

116206 G3707-048 116633 G3707-048B 750 2550 277 3.4

116213 E3712-060 116640 E3712-060B 1250 4250 120 10.4

116220 F3712-060 116657 F3712-060B 1250 4250 208 6

116237 H3712-060 116664 H3712-060B 1250 / 938 4250 / 3189 240 / 208 5.2/4.5

116244 G3712-060 116671 G3712-060B 1250 / 938 4250 / 3189 277 / 240 4.5/3.9

116251 G3709-060 116688 G3709-060B 938 3189 277 3.4

116268 E3715-072 116695 E3715-072B 1500 5100 120 12.5

116275 F3715-072 116701 F3715-072B 1500 5100 208 7.2

116282 H3715-072 116718 H3715-072B 1500 / 1125 5100 / 3825 240 / 208 6.3/4.7

116299 G3715-072 116725 G3715-072B 1500 / 1125 5100 / 3825 277 / 240 5.4/4.7

116305 G3711-072 116732 G3711-072B 1125 3825 277 4.1

116312 F3717-084 116749 F3717-084B 1750 5950 208 8.4

116329 H3717-084 116756 H3717-084B 1750 / 1313 5950 / 4464 240 / 208 7.3/6.3

116336 G3717-084 116763 G3717-084B 1750 / 1313 5950 / 4464 277 / 240 6.3/5.5

116343 G3713-084 116770 G3713-084B 1313 4464 277 4.7

116350 F3720-096 116787 F3720-096B 2000 6826 208 9.6

116367 H3720-096 116794 H3720-096B 2000 / 1500 6826 / 5100 240 / 208 8.3/7.2

116374 G3720-096 116800 G3720-096B 2000 / 1500 6826 / 5100 277 / 240 7.2/6.3

116381 G3715-096 116817 G3715-096B 1500 5100 277 5.4

116398 F3725-120 116824 F3725-120B 2500 8532 208 12

116404 H3725-120 116831 H3725-120B 2500 / 1875 8532 / 6375 240 / 208 10.4/9.0

116411 G3725-120 116848 G3725-120B 2500 / 1875 8532 / 6375 277 / 240 9.0/7.8

116428 G3718-120 116855 G3718-120B 1875 6375 277 6.8

MODEL

Note: Refer to 3900 Series for product dimension specications.

Note: Please see page 60 for custom color availability - add 10% to net heater cost.

UPC

686334

MODEL

WATTS BTU’s VOLTS AMPS

HEATER LENGTH

(IN.)

24 14

28 16

36 22

40 27

48 31

60 33

72 41

84 49

96 58

120 67

Manufactured in U.S.A.

WT.

WHITE

(LBS.)

BROWN

LIST

299 311

331 344

382 396

389 402

402 415

526 539

589 603

661 674

698 719

785 797

Product Specications

The entire heater casing shall be constructed of 6063 extruded Aluminum. Minimum thickness of .100” (12 gauge) Aluminum shall be acceptable. Outlet grill shall cover entire length of air discharge opening and be constructed of steel. All casing and grill construction shall be painted with high quality durable powder coated paint. The heating element shall be high quality nichrome wire encased in Magnesium Oxide and sealed in a stainless steel tube. Linear automatic thermal limit shall extend the entire heater length of element and protect heater in case of an over-temperature condition. Optional controls shall be mounted in junction box enclosures at either end of heater. Optional integral thermostat shall be located in junction box with adjustment knob or for tamper-proof operation. Optional disconnect switch shall be mounted in junction box. Optional 120 Volt or air conditioning receptacle shall be mounted in junction box. Optional installation accessories shall include inside and outside corner sections for complete wall

perimeter t. Prole of corners

and grill shall have appearance of heat sections for continuous architectural design. Corner accessories and heater sections shall be secured by alignment pins for easy alignment of multiple heater applications.

Page 51

Hydronic & Architectural Electric Baseboard Heater Accessories

Field Installed Accessories

Standard White Commercial Brown

DESCRIPTION

Single Pole, In-Built T-Stat, 22A @ 120-240V; 18A @ 277V; 50°-90° F 111874 3900T1 111959 3900T1C 61

Double Pole, In-Built T-Stat, 22A @ 120-240V; 18A @ 277V; 50°-90° F 111881 3900T2 111966 3900T2C 79

Air Conditioning Receptacle Section, 20 Amp @ 125-277V 111898 3900AC 111997 3900ACC 72

120V. Receptacle Section, 15 Amp 111904 3900REC 112000 3900RECC 67

Disconnect Switch, 20 Amp @ 125-277VAC; DPST 111942 3900DS 112048 3900DSC 99

STANDARD WHITE COMMERCIAL BROWN DESCRIPTION

UPC#

686334

MODEL

UPC#

686334

MODEL

Baseboard Sections

UPC#

686334

MODEL SECTION SIZE

UPC#

686334

MODEL

LIST

OUTSIDE

CORNER

INSIDE

CORNER

Outside and inside corner

sections are 6” on longest side

Dimension

3.00”

112154 39BS28 112215 39BS28C

112161 39BS36 112222 39BS36C 36” 256

112178 39BS48 112239 39BS48C 48” 317

112185 39BS60 112246 39BS60C 60” 380

112192 39BS72 112253 39BS72C 72” 438

112208 39BS96 112260 39BS96C 96” 563

115094 39BS120 115100 39BS120C 120” 751

111911 3900-ICS 112017 3900-ICSC Inside Corner

111928 3900-OCS 112024 3900-OCSC Outside Corner 125

111935 3900-CS 112031 3900-CSC Control Section 4” Blank 157

Blank Section

28” 215

Wireway Covers (White Units Only)

TEMPERATURE LIMITING DEVICE

UPC#

686334

112284 3900WW28 28” 2 47

MODEL LENGTH

SHIP WT.

(LBS)

123

LIST

4.10

1.43

1.60

2.42

8.50”

WIRE NUT

112291 3900WW36 36” 2.5 52

112307 3900WW48 48” 3.5 62

112314 3900WW60 60” 4.5 68

112321 3900WW72 72” 5.5 73

112338 3900WW96 96” 7.5 96

115117 3900WW120 120” 7.5 129

2.1

Page 52

2900HA Series Electric Baseboard - High Altitude Convection Heater

Features

• Available in white or ivory with Aluminum heating element and Aluminum ns.

• Painted 22 gauge steel front with 20 gauge junction boxes located on each end of the heater - junction boxes contain quick connect cable clamps and 6” ground lead wires.

• Over-temperature thermal limit extends entire length of heated area.

• A full length wireway provided along the back of the heater.

• Optional enclosed conduit wireway available.

• Heater can be mounted to the wall by using the key hole knockouts every 4” at the back of the heater.

Manufactured in U.S.A.

UPC#

686334 101226 E2903-024HAW 375 1275 120 3.1 101233 F2903-024HAW 375 1275 208 1.8 101240 H2903-024HAW 375 / 281 1275 / 955 240 / 208 1.6/1.4 101257 G2903-024HAW 375 / 281 1275 / 955 277 / 240 1.6/1.2 101264 E2905-028HAW 500 1706 120 4.2 101271 F2905-028HAW 500 1706 208 2.4 101288 H2905-028HAW 500 / 375 1706 / 1275 240 / 208 2.1/1.8 101295 G2905-028HAW 500 / 375 1706 / 1275 277 / 240 1.8/1.6 101301 E2906-036HAW 600 2040 120 5 101318 F2906-036HAW 600 2040 208 2.9 101325 H2906-036HAW 600 / 450 2040 / 1530 240 / 208 2.5/2.2 101332 G2906-036HAW 600 / 450 2040 / 1530 277 / 240 2.2/1.9 101349 E2907-040HAW 750 2550 120 6.3 101356 F2907-040HAW 750 2550 208 3.6 101363 H2907-040HAW 750 / 563 2550 / 1914 240 / 208 3.1/2.7 101370 G2907-040HAW 750 / 563 2550 / 1914 277 / 240 2.7.2.6 101387 E2910-048HAW 1000 3413 120 8.3 101394 F2910-048HAW 1000 3413 208 4.8 101400 H2910-048HAW 1000 / 750 3413 / 2550 240 / 208 4.2/3.6 101417 G2910-048HAW 1000 / 750 3413 / 2550 277 / 240 3.6/3.1 101424 G2907-048HAW 750 2550 277 3.4 101431 E2912-060HAW 1250 4250 120 10.4 101448 F2912-060HAW 1250 4250 208 6 101455 H2912-060HAW 1250 / 938 4250 / 3189 240 / 208 5.2/4.5 101462 G2912-060HAW 1250 / 938 4250 / 3189 277 / 240 4.5/3.9 101479 G2909-060HAW 938 3189 277 3.4 101486 E2915-072HAW 1500 5100 120 12.5 101493 F2915-072HAW 1500 5100 208 7.2 101509 H2915-072HAW 1500 / 1125 5100 / 3825 240 / 208 6.3/4.7 101516 G2915-072HAW 1500 / 1125 5100 / 3825 277 / 240 5.4/4.7 101523 G2911-072HAW 1125 3825 277 4.1 101578 F2920-096HAW 2000 6826 208 9.6 101585 H2920-096HAW 2000 / 1500 6826 / 5100 240 / 208 8.3/7.2 101592 G2920-096HAW 2000 / 1500 6826 / 5100 277 / 240 7.2/6.3 101608 G2915-096HAW 1500 5100 277 5.4 101653 F2925-120HAW 2500 8532 208 12 101660 H2925-120HAW 2500 / 1875 8532 / 6375 240 / 208 10.4/9.0 101677 G2925-120HAW 2500 / 1875 8532 / 6375 277 / 240 9.0/7.8 101684 G2918-120HAW 1875 6375 277 6.8

WHITE MODEL

• Optional In-Built thermostats eld installed in the junction box.

• HEIGHT: 6” DEPTH: 2-1/2”

• Ivory available with extended lead times-consult factory.

Standard Models

WATTS BTU’s VOLTS AMPS

HEATER

LENGTH (IN)

24 5 62

28 6 64

36 7 71

40 8 74

48 10 89

60 12 111

72 14 125

96 18 153

120 22 169

WT.

(LBS.)

LIST

2900A Series - International Models

UPC# 686334 WHITE MODEL WATTS BTU’s VOLTS HEATER LENGTH (IN)

115766 M2903-24AWi 115773 H2903-24AWi 240 115780 M2905-28AWi 115977 H2905-28AWi 240 115803 M2906-36AWi 115810 H2906-36AWi 240 115827 M2907-40AWi 115834 H2907-40AWi 240 115841 M2910-48AWi 115858 H2910-48AWi 240 115865 M2912-60AWi 115872 H2912-60AWi 240 115889 M2915-72AWi 115896 H2915-72AWi 240 115902 M2917-84AWi 118002 H2917-84AWi 240 118033 M2925-120AWi 118040 H2920-120AWi 240

375 1275

500 1706

600 2040

750 2550

1000 3413

1250 4250

1500 5100

1750 5950

2500 8532

Wireway Length Same As Baseboard Length

220

24” 10 81

28” 11 84

36” 11.5 93

40” 13 97

48” 14 116

60” 16 145

72” 19 163

80” 22 199

120” 31 220

WEIGHT (LBS) LIST

Page 53

2900S Series Electric Baseboard - Stainless Steel Element Convection Heater

Features

• Available in white or ivory with stainless steel heating element and Aluminum

ns.

• Painted 22 gauge steel front with 20 gauge junction boxes located on each end of the heater - junction boxes contain quick connect cable clamps and 6”ground lead wires.

• Over-temperature thermal limit extends entire length of heated area.

• A full length wireway provided along the back of the heater - enclosed conduit

Manufactured in U.S.A.

available.

• Heater can be mounted to the wall by using the key hole knockouts every 4” at the back of the heater.

• Optional In-Built thermostats eld installed in the junction box.

• HEIGHT: 6” DEPTH: 2-1/2”

Standard Models

UPC IVORY UPC WHITE

686334 MODEL 686334 MODEL

104302 E2903-024S 104999 E2903-024SW 375 1275 120 3.1 104319 F2903-024S 105002 F2903-024SW 375 1275 208 1.8 104326 H2903-024S 105019 H2903-024SW 375 / 281 1275 / 955 240 / 208 1.6/1.4 104333 G2903-024S 105026 G2903-024SW 375 / 281 1275 / 955 277 / 240 1.6/1.2 104340 E2905-028S 105033 E2905-028SW 500 1706 120 4.2 104357 F2905-028S 105040 F2905-028SW 500 1706 208 2.4 104364 H2905-028S 105057 H2905-028SW 500 / 375 1706 / 1275 240 / 208 2.1/1.8 104371 G2905-028S 105064 G2905-028SW 500 / 375 1706 / 1275 277 / 240 1.8/1.6 104388 E2906-036S 105071 E2906-036SW 600 2040 120 5 104395 F2906-036S 105088 F2906-036SW 600 2040 208 2.9 104401 H2906-036S 105095 H2906-036SW 600 / 450 2040 / 1530 240 / 208 2.5/2.2 104418 G2906-036S 105101 G2906-036SW 600 / 450 2040 / 1530 277 / 240 2.2/1.9 104425 E2907-040S 105118 E2907-040SW 750 2550 120 6.3 104432 F2907-040S 105125 F2907-040SW 750 2550 208 3.6 104449 H2907-040S 105132 H2907-040SW 750 / 563 2550 / 1914 240 / 208 3.1/2.7 104456 G2907-040S 105149 G2907-040SW 750 / 563 2550 / 1914 277 / 240 2.7.2.6 104463 E2910-048S 105156 E2910-048SW 1000 3413 120 8.3 104470 F2910-048S 105163 F2910-048SW 1000 3413 208 4.8 104487 H2910-048S 105170 H2910-048SW 1000 / 750 3413 / 2550 240 / 208 4.2/3.6 104494 G2910-048S 105187 G2910-048SW 1000 / 750 3413 / 2550 277 / 240 3.6/3.1 104500 G2907-048S 105194 G2907-048SW 750 2550 277 3.4 104517 E2912-060S 105200 E2912-060SW 1250 4250 120 10.4 103008 F2912-060S 105217 F2912-060SW 1250 4250 208 6 103015 H2912-060S 105224 H2912-060SW 1250 / 938 4250 / 3189 240 / 208 5.2/4.5 103022 G2912-060S 105231 G2912-060SW 1250 / 938 4250 / 3189 277 / 240 4.5/3.9 103039 G2909-060S 105248 G2909-060SW 938 3189 277 3.4 103046 E2915-072S 105255 E2915-072SW 1500 5100 120 12.5 103053 F2915-072S 105262 F2915-072SW 1500 5100 208 7.2 103060 H2915-072S 105279 H2915-072SW 1500 / 1125 5100 / 3825 240 / 208 6.3/4.7 103077 G2915-072S 105286 G2915-072SW 1500 / 1125 5100 / 3825 277 / 240 5.4/4.7 103084 G2911-072S 105293 G2911-072SW 1125 3825 277 4.1 103091 F2917-084S 105309 F2917-084SW 1750 5950 208 8.4 103107 H2917-084S 105316 H2917-084SW 1750 / 1313 5950 / 4464 240 / 208 7.3/6.3

103114 G2917-084S 105323 G2917-084SW 1750 / 1313 5950 / 4464 277 / 240 6.3/5.5 103121 G2913-084S 105330 G2913-084SW 1313 4464 277 4.7 103138 F2920-096S 105347 F2920-096SW 2000 6826 208 9.6 103145 H2920-096S 105354 H2920-096SW 2000 / 1500 6826 / 5100 240 / 208 8.3/7.2 103152 G2920-096S 105361 G2920-096SW 2000 / 1500 6826 / 5100 277 / 240 7.2/6.3 103169 G2915-096S 105378 G2915-096SW 1500 5100 277 5.4 103213 F2925-120S 105422 F2925-120SW 2500 8532 208 12 103220 H2925-120S 105439 H2925-120SW 2500 / 1875 8532 / 6375 240 / 208 10.4/9.0 103237 G2925-120S 105446 G2925-120SW 2500 / 1875 8532 / 6375 277 / 240 9.0/7.8 103244 G2918-120S 105453 G2918-120SW 1875 6375 277 6.8

WATTS BTU’s VOLTS AMPS

HEATER LENGTH

(IN)

24 5 60

28 6 62

36 7 70

40 8 72

48 10 87

60 12 107

72 14 123

84 16 135

96 18 150

120 22 164

WT.

(LBS.)

LIST

Page 54

2900C Series Electric Baseboard - Heavy Duty Commercial Convection Heater

Features

Manufactured in U.S.A.

UPC#

686334

103831 E2903-024C 375 1275 120 3.1 103848 F2903-024C 375 1275 208 1.8 103855 H2903-024C 375 / 281 1275 / 955 240 / 208 1.6 / 1.4 103862 G2903-024C 375 / 281 1275 / 955 277 / 240 1.6 / 1.2 103879 E2905-028C 500 1706 120 4.2 103886 F2905-028C 500 1706 208 2.4 103893 H2905-028C 500 / 375 1706 / 1275 240 / 208 2.1 / 1.8 103909 G2905-028C 500 / 375 1706 / 1275 277 / 240 1.8 / 1.6 103916 E2906-036C 600 2040 120 5.0 103923 F2906-036C 600 2040 208 2.9 103930 H2906-036C 600 / 450 2040 / 1530 240 / 208 2.5 / 2.2 103947 G2906-036C 600 / 450 2040 / 1530 277 / 240 2.2 / 1.9 103954 E2907-040C 750 2550 120 6.3 103961 F2907-040C 750 2550 208 3.6 103978 H2907-040C 750 / 563 2550 / 1914 240 / 208 3.1 / 2.7 103985 G2907-040C 750 / 563 2550 / 1914 277 / 240 2.7 / 2.6 103992 E2910-048C 1000 3413 120 8.3 104005 F2910-048C 1000 3413 208 4.8 104012 H2910-048C 1000 / 750 3413 / 2550 240 / 208 4.2 / 3.6 104029 G2910-048C 1000 / 750 3413 / 2550 277 / 240 3.6 / 3.1 104036 G2907-048C 750 2550 277 3.4 104043 E2912-060C 1250 4250 120 10.4 104050 F2912-060C 1250 4250 208 6.0 104067 H2912-060C 1250 / 938 4250 / 3189 240 / 208 5.2 / 4.5 104074 G2912-060C 1250 / 938 4250 / 3189 277 / 240 4.5 / 3.9 104081 G2909-060C 938 3189 277 3.4 104098 E2915-072C 1500 5100 120 12.5 104104 F2915-072C 1500 5100 208 7.2 104111 H2915-072C 1500 / 1125 5100 / 3825 240 / 208 6.3 / 4.7 104128 G2915-072C 1500 / 1125 5100 / 3825 277 / 240 5.4 / 4.7 104135 G2911-072C 1125 3825 277 4.1 104142 F2917-084C 1750 5950 208 8.4 104159 H2917-084C 1750 / 1313 5950 / 4464 240 / 208 7.3 / 6.3 104166 G2917-084C 1750 / 1313 5950 / 4464 277 / 240 6.3 / 5.5 104173 G2913-084C 1313 4464 277 4.7 104180 F2920-096C 2000 6826 208 9.6 104197 H2920-096C 2000 / 1500 6826 / 5100 240 / 208 8.3 / 7.2 104203 G2920-096C 2000 / 1500 6826 / 5100 277 / 240 7.2 / 6.3 104210 G2915-096C 1500 5100 277 5.4 104265 F2925-120C 2500 8532 208 12.0 104272 H2925-120C 2500 / 1875 8532 / 6375 240 / 208 10.4 / 9.0 104289 G2925-120C 2500 / 1875 8532 / 6375 277 / 240 9.0 / 7.8 104296 G2918-120C 1875 6375 277 6.8

BRONZE

MODEL

WATTS BTU’s VOLTS AMPS

• Bankers bronze with stainless steel heating element and Aluminum ns.

• Powder coated 22 gauge steel front with 20 gauge junction boxes located on each end of the heater - junction boxes contain quick connect cable clamps and 6” ground lead wires.

• Standard inlet and outlet wire guards.

• Over-temperature thermal limit extends entire heated length of unit.

• A full length wireway provided along the back of the heater.

• Heater can be mounted to the wall by using the key hole knockouts every 4” at the back of the heater.

• Optional In-Built thermostats eld installed in the junction box.

• HEIGHT: 6” DEPTH: 2-1/2”

Standard Models

HEATER

LENGTH (IN)

24 5 137

28 6 171

36 7 195

40 8 204

48 10 236

60 12 282

72 14 324

84 16 360

96 18 398

120 22 418

WEIGHT

(LBS)

LIST

International Models

UPC#

686334

118057 M2903-024CI 118064 H2903-024CI 240 240 118071 M2905-028CI 118088 H2905-028CI 240 2.1 118095 M2906-036CI 118101 H2906-036C 240 2.5 118118 M2907-040CI 118125 H2907-040C 240 3.1 118132 M2910-048CI 118149 H2910-048CI 240 4.2 118156 M2912-060CI 118163 H2912-060C 240 5.2 118170 M2915-072CI 118187 H2915-072CI 240 6.3 118194 M2917-084CI 118200 H2917-084CI 240 7.3 118217 M2920-096CI 118224 H2920-096CI 240 8.3 118231 M2925-120CI 118248 H2925-120CI 240 10.4

BRONZE

MODEL

WATTS BTU’s VOLTS AMPS

375 1275

500 1706

600 2040

750 2550

1000 3413

1250 4250

1500 5100

1750 5950

2000 6826

2500 8532

220 1.7

220 2.3

220 2.7

220 3.4

220 4.6

220 5.7

220 6.8

220 8.0

220 9.1

220 11.4

HEATER

LENGTH (IN)

24 5 137

28 6 171

36 7 195

40 8 204

48 10 236

60 12 282

72 14 324

84 16 360

96 18 398

120 22 418

WEIGHT

(LBS)

LIST

Page 55

Electric Baseboard - Accessories

In-Built Thermostat Kits- With Two Cover Plates

IVORY & WHITE

UPC 686334

105460 TBS SPST-In-Built 22A @ 120-240V 18A @ 277V

502702 TBS-TP SPST-In-Built 22A @ 120-240V 18A @ 277V Tamperproof

105477 TBD DPST-In-Built 22A @ 120-240V 18A @ 277V

502719 TBD-TP DPST-In-Built 22A @ 120-240V 18A @ 277V Tamperproof

MODEL

NUMBER

DESCRIPTION

WEIGHT

(LBS)

1/2 lbs. 40

1/2 lbs. 52

Field Installed Accessories

IVORY WHITE BANKERS BRONE

DESCRIPTION

UPC 686334 MODEL UPC 686334 MODEL UPC 686334 MODEL

Disconnect Switch, 20

Amp, 120-277V

Corner Sections 105491 CS 105507 CSW 105514 CSB 34

106108 DS 106115 DSW 106122 DSB

WEIGHT

(LBS)

1 lb.

LIST

1” Joiner Kits 105521 JK 105538 JKW 105545 JKB 1/4 lb. 23

6” Blank Relay Section (Relay Not Included)**

Receptacle Section

(Baseboard Mounted)

15 Amp 120 VAC

Receptacle Section

(Mounted in 6” Blank)

15 Amp 120 VAC

Transfer Switch

(Mounted in 6” Blank)

16 Amp 120 VAC

Transfer Switch

(Mounted in 6” Blank)

16 Amp 240 VAC

105552 LVRS 105569 LVRSW 105576 LVRSB 1 1/2 lbs. 95

105583 BDR115 105590 BDR115W 105606 BDR115B 1/4 lb. 23

105613 DR115 105620 DR115W 105637 DR115B

105644 SR120 105651 SR120W 105668 SR120B 139

105675 SR220 105682 SR220W 105699 SR220B 169

2 lbs.

**Not for use with 24A06G-1 relay.

Optional Wireway Covers

UPC

MODEL

686334

105705 WWA01 24 20 1 33

105712 WWA02 28 24 1.5 36

105729 WWA03 36 32 2 39

105736 WWA04 40 36 2.5 45

105743 WWA05 48 44 3 47

105750 WWA06 60 56 4 50

105767 WWA07 72 68 5 57

105774 WWA08 84 80 6 65

105781 WWA09 96 92 7 75

105798 WWA00 120 116 8 91

BASEBOARD

LENGTH

(in.)

COVER

LENGTH

(in.)

WEIGHT

(LBS)

LIST

LENGTH

24” 105804 BBS024A 105903 BBS024AW 106009 BBS024C 5 52 107

28” 105811 BBS028A 105910 BBS028AW 106016 BBS028C 5 1/2 57 117

36” 105828 BBS036A 105927 BBS036AW 106023 BBS036C 6 69 135

40” 105835 BBS040A 105934 BBS040AW 106030 BBS040C 7 74 142

48” 105842 BBS048A 105941 BBS048AW 106047 BBS048C 8 83 146

60” 105859 BBS060A 105958 BBS060AW 106054 BBS060C 10 100 202

72” 105866 BBS072A 105965 BBS072AW 106061 BBS072C 12 120 222

84” 105873 BBS084A 105972 BBS084AW 106078 BBS084C 15 126 253

96” 105880 BBS096A 105989 BBS096AW 106085 BBS096C 17 147 283

120” 105897 BBS120A 105996 BBS120AW 106092 BBS120C 20 180 357

IVORY WHITE BANKERS BRONZE

UPC MODEL UPC MODEL UPC MODEL

Blank Sections

WEIGHT

(LBS)

IVORY

WHITE

LIST

110

BRONZE

LIST

Page 56

9100 Series - Radius Front Draft Barrier Heater

ETL listed up to 250 Watts / foot for industrial, commercial, or residential

applications.

Manufactured in U.S.A.

HOW TO DESIGNATE A MODEL:

Element Volts E = 120 F = 208 G = 277 H = 240

• Standard colors, white or ivory.

• “UNI-LOCK” construction allows snap-t, 2 piece

installation.

• Units can be controlled by optional In-Built thermostat or can be constructed with relays and / or transformers for low voltage or line voltage wall thermostats

• Thermal protection by full length manual reset linear limits

• Optional duplex receptacle section

• Wiring junction boxes on each end of the unit

• Custom colors and nishes available (consult factory)

• Limited by max Amp draw of 25 Amps (with no controls).

• Additional charges may be incurred if changes are made after production has begun - consult factory.

E 91 96 250 ITS PD

Model Series 91

Heater Length (inches) 28, 36, 48, 60, 72, 84, 96, 108, or 120

Watts Per Foot 100, 125, 150, 165, 187, 200, or 250

Features

Control Options Refer to Pg. 60

Factory Installed Accessories PD = Pedestal DR = Receptacle WM = Screen

Product Description

TECHNICAL INFORMATION

Air Intake Bottom

Air Discharge To p

Min Mounting Height 3”

Max Watts / Foot 250

Max Allowable Amps 25 Amps (20 Amps with disconnect)

Voltage / Phase 120V/208V/240V/277V Single Phase

Standard Models

MODEL

Heater

UNIT

LENGTH

9128 28” 298

9136 36” 343 45

9148 48” 394 48

9160 60” 459 54

9172 72” 524 58

9184 84” 604 68

9196 96” 660 75

91108 108” 728 87

91120 120” 797 98

LIST

BACK ADDER

FINISHED

MODEL

91BS012 12” 83 34

91BS024 24” 11 2 39

91BS036 36” 144 45

91BS048 48” 174 48

91BS060 60” 204 54

91BS072 72” 237 58

91BS084 84” 289 68

Blank Section

91BS096 96” 298 75

91BS108 108” 329 87

91BS120 120” 359 98

LENGTH

UNIT

LIST

BACK ADDER

Height 4 1/2”

Depth 3 1/8”

Length 28” to 120” in 1’ increments

Cabinet Material Material

Optional Controls That Can

FINISHED

Gauge

Be Built Into Unit

SUFFIX DESCRIPTION LIST

WM 1/4” wire mesh under grill

MODEL DESCRIPTION LIST

9100IC Inside Corner Section 90° or 135°

9100OC Outside Corner Section 90° or 135°

9100EC Right or Left End Cap 61

TECHNICAL INFORMATION

Aluminum

Thermostat and Disconnect Switch

(Control Section Required for Relays)

Factory Installed Accessories

Duplex Receptacle in 4” Extended

Enclosure (not available with 120” heater)

28” through 60” - 2 Required 124 72” through 96” - 3 Required 186

108” through 120” - 4 Required 248

Field Installed Accessories

187

$6.00

Per foot

180

Note: All models are suitable for International use Note: Extended enclosure per foot is 33 dollars.

Page 57

9100 Series - Radius Front Draft Barrier Heater

Product Specications

CABINET

9100 Series shall be constructed of 14 gauge extruded 6063 Aluminum heat treated to T5 hardness. The

uni-lock construction shall allow easy installation and access to back plate for wiring. The snap-t front

cover makes installation and service very simple. Custom factory enclosures to 1/16 inch increments are

built for exact wall to wall t up to 10 foot enclosure lengths. The 14 gauge back plate will have electrical

knockouts for incoming power on each end adjacent to junction box. Pedestal mounted units will have incoming power connection through the pedestal on bottom of unit and will have smooth back for optional

nished back. The die punched front cover will have no screw heads or fasteners.

ELEMENTS

High mass sheathed element construction with Nickel-Chromium resistance wire embedded in compacted

efcient die-electric to ensure proper heat transfer. Aluminum ns mechanically bonded to stainless steel

tube allows for increased surface area and even heat transfer.

LIMIT CONTROLS

Manual reset hydraulic thermal overload covers full length of heating element and shuts down heater when safe operating temperatures are exceeded.

WIRING

Wiring shall be in either end of the enclosure. Wiring can be in the junction box or optional control section if additional controls are needed. Pedestal mounted units shall have 1-1/4” hole through the pedestal and in the bottom of the enclosure for incoming power wiring. All heaters have a factory supplied built in raceway for wiring from either end of the heater or for wiring of continuous heater connections.

CONTROLS

Optional controls include single or double pole thermostat and disconnect switch that are factory wired in enclosed junction box on each end of heater enclosure. Relay, transformer relay and duplex receptacle options shall be mounted in extended length control section. Control section will add to heater enclosure length. The control section for the duplex receptacle will add 4” to enclosure length. The control section for other optional components or combinations of components will have two options (6” or 12”) depending on controls required.

APPLICATION

The 9100 series is ETL listed for commercial, industrial or residential applications on all units up to 250 Watts per foot.

Product Dimensions

OUTSIDE CORNER SECTION

BACK VIEW

INSIDE CORNER SECTION

6.0”

1-1/8"

1-9/16"

1-1/2"

4-1/2"

3" MINIMUM

3-1/8"

1-9/16"

FINISHED FLOOR

WALL MOUNT

3-1/8"

15/16"

PEDESTAL MOUNT

Ø .395 (TYP)

1-9/16"

2-1/16"

2-7/16"

TYP

PEDESTAL BASE

3-1/16”

6.0”

Page 58

HOW TO DESIGNATE A MODEL:

9300 Series - Radius Front Draft Barrier Heater

ETL listed up to 750 Watts

/ foot for industrial or

commercial applications.

Manufactured in U.S.A.

Element Volts E = 120 F = 208 H = 240 G = 277 L = 347 P1 = 480 U1 = 600

J = 208 K = 240 P3 = 480 U3 = 600

Model Series 93

Single Phase

Three Phase

Features

• Leed and green compliance, 1 and 3 phase applications

• Industrial or commercial applications

• Standard color: Bankers Bronze (powder coated)

• Also available in other standard TPI colors and custom colors for an additional charge

• Uni-lock construction for snap t 2 piece installation

• Temperature control can be in-built or wall mounted

• Thermal protection by full length manual reset linear limits

• Optional accessories include: duplex receptacle, and inside

or outside corner sections for wall to wall custom t.

• Additional charges may be incurred if changes are made after production has begun - consult factory.

E 93 96 B 250 3 ITS PD

Heater Length (inches) 28, 36, 48, 60, 72, 84, 96, 108, or 120

Inlet B = Bottom F = Front

Watts Per Foot Per Element 100, 125, 150, 165, 187, 200, or 250

# of Elements 100, 125, 150, 165, 187, 200, or 250

Control Options Refer to Pg. 60 of TPI Heat catalog.

Factory Installed Accessories PD = Pedestal DR = Receptacle WM = Screen

Note: 480V single phase units minimum 36” heated length; 600V single phase units minimum 48” heated length 347-480-600 single phase and all three phase units are built with low voltage option factory installed

Product Description

TECHNICAL INFORMATION

Air Intake Bottom / Front

Air Discharge Top

Min Mounting Height 3” for bottom intake / 0” for front intake

Max Watts / Foot 750

Max Allowable Amps 25 without relay, 40 with relay

Voltage / Phase

120V/208V/240V/277V/347V,480V,600V Single Phase

208V,240V,480V,600V Three Phase

Standard Models

MODEL

UNIT

LENGTH

9328 28” 776

9336 36” 816 65

9348 48” 920 70

9360 60” 1022 75

9372 72” 1097 80

Heater

9384 84” 1173 85

9396 96” 1237 90

93108 108” 1298 95

93120 120” 1382 100

Note: All models are suitable for International use Note: Extended enclosure per foot is 100 dollars.

LIST

BACK ADDER

FINISHED

MODEL

93BS012 12” 318 55

93BS024 24” 373 60

93BS036 36” 419 65

93BS048 48” 485 70

93BS060 60” 542 75

93BS072 72” 586 80

93BS084 84” 643 85

Blank Section

93BS096 96” 700 90

93BS108 108” 756 95

93BS120 120” 811 100

UNIT

LENGTH

LIST

BACK ADDER

FINISHED

Height 7.5”

Depth 6.15”

Length 28” to 120” in 1’ increments

Cabinet Material

Material Gauge

Optional Controls That

Can Be Built Into Unit

TECHNICAL INFORMATION

Aluminum

Thermostat, Disconnect Switch, Transformer

(Control Section Required for Relays)

Factory Installed Accessories

SUFFIX DESCRIPTION LIST

WM 1/4” wire mesh under grill

IDS30 30 Amp/240V Disconnect Switch 95 IDS40 40 Amp/600V Disconnect Switch 95

Note: If using line voltage thermostat on 1 phase heaters, you cannot exceed 25 Amps due to Amp rating of thermostat. 347, 480, and 600V can use 30 Amps with in-built thermostat.

Duplex Receptacle in 4” Extended

Enclosure (not available with 120” heater)

28” through 60” - 2 Required 139 72” through 96” - 3 Required 210

108” through 120” - 4 Required 278

139

$4.00

Per foot

Field Installed Accessories

MODEL DESCRIPTION LIST

9300IC Inside Corner Section 90° or 135°

9300OC Outside Corner Section 90° or 135°

9300EC Right or Left End Cap 85

223

Page 59

Ø .395 (TYP)

TYP

PEDESTAL BASE

Ø .395 (TYP)

TYP

PEDESTAL BASE

7.500

6.15

7.500

6.15

3" MINIMUM

FINISHED FLOOR

12.0

9300 Series - Radius Front Draft Barrier Heater

Product Specications

CABINET

9300 Series shall be constructed of 12 gauge extruded 6063 Aluminum heat treated to T5 hardness. The

uni-lock construction shall allow easy installation and access to back plate for wiring. The snap-t front

cover makes installation and service very simple. Custom factory enclosures to 1/16 inch increments are

built for exact wall to wall t up to 10 foot enclosure lengths. The 12 gauge back plate will have electrical

nished back. The die punched front cover will have no screw heads or fasteners.

ELEMENTS

High mass sheathed element construction with Nickel-Chromium resistance wire embedded in compacted

efcient die-electric to ensure proper heat transfer. Aluminum ns mechanically bonded to stainless steel

tube allows for increased surface area and even heat transfer.

LIMIT CONTROLS

Manual reset hydraulic thermal overload covers full length of heating element and shuts down heater when safe operating temperatures are exceeded.

WIRING

CONTROLS

APPLICATION

The 9300 series is ETL listed for commercial or industrial applications on all units up to 750 Watts per foot on all units. 3 Phase units have a minimum of 300 Watts per foot.

Product Dimensions

OUTSIDE CORNER SECTION

12.0

7.500

3" MINIMUM

6.15

7.500

FINISHED FLOOR

6.15

Ø .395 (TYP)

TYP

PEDESTAL BASE

INSIDE CORNER SECTION

Page 60

Draft Barrier Heaters - General Product Information

All Draft Barrier Heaters, unless otherwise noted, are build to order items. Consult factory for lead times.

Additional charges may be incurred if changes are made after production has begun - consult factory.

Electric Draft Barrier Features

• “UNI-LOCK” construction allows snap-t, 2 piece installation

• Heavy Gauge Aluminum Extruded enclosures, 6063 heat treated to T-5 hardness a. DBT/DBF & RDBT-PD-12 gauge front & back b. DBCT/DBCF- 10 gauge Front & Back c. CB-14 gauge Front & Back

• ASHDB Series is 16 gauge Steel Front with 18 Steel gauge back

• 1/4” pencil proof discharge louvers

How To Designate A Model

Digit (Example) MODEL NUMBER DESIGNATION - “ASI” DRAFT BARRIER

Digit 1= DBT Series Model Number ( DBT/DBF, CB, Etc.)

Use if Pedestals are Required*

Digit 2= PD

Digit 3= 4

Digit 4= 250

Digit 5= ITS (etc)

Completed example: DBT-PD-4250-ITS

(for extended enclosure, specify amount of required enclosure on

order write up, IE: 4’ Heated length w/ 2’6” of extended enclosure)

on specic models, refer to catalogue page to verify maximum WPF)

Wattage per Linear foot ( may not exceed allowable wattages

Control Options ; Refer to List Price chart for available options

( Verify on each model which options may be factory installed )

2’ to 5’ Heaters require 2 pedestals

6’ to 8’ Heaters require 3 pedestals

9’ & 10’ Heaters require 4 pedestals

Heated Length of Heater

Voltage & Wattage Specication

• Thermal protection by full length linear limits

• Multiple heaters, factory wired on same back plate, available in up to 10’ lengths

• Totally enclosed junction boxes

• Custom colors and nishes available (See Chart )

• Enclosures available for hydronic heating coils (consult factory for more information )

NOTE:

• Extended enclosures and Blank Sections are NOT punched. When a Control

Section is specied, ALWAYS

allow for an extended enclosure to compensate for the 6” or 12” length of the Section required.

• Note on order when nished

backs are required and add list adder to model list.

• Total heater amperage must

not exceed the 25-Amp rating of the high temperature limit at any voltage or wattage. This applies to all Sill Line Model Series.

Voltage Standard Wattages Per Foot Heater Lengths

120-277 100, 125, 150, 165, 187, 200, 250*, 300, 333*, 375* 2’ through 10’

*Units with Extended Enclosures may require more Pedestals than standard length, must verify length of heater after extended enclosures for

total amount of pedestals. NOTE: All bottom inlet units must be mounted a minimum of 3 inches above nished oor.

Dual element models DBCT/DBCF and ASHDB. All elements are single phase. Consult factory for more information.

Control Options

Sufx Designation Description List Adder

CS 6 6” control section / will contain up to 2 control options

CS 12 12” control section / will contain up to 3 control options

ITS Single Pole, 25 Amp integral thermostat, 120,208,240 & 277 Volts 70

ITD Double Pole, 25 Amp integral thermostat, 120,208,240 & 277 Volts 76

IDS Double Pole Disconnect, 20 Amp, 120, 208, 240 & 277 Volts 70

IDS 30 30 Amp disconnect (9300 Series) 95

IDS 40 40 Amp disconnect (9300 Series) 75

LVTR Low voltage controls (trans & relay) 200

PR 120-277/24

PR 120-277/240

ATR*

* Not suitable for International use Note: Please refer to each model to verify how many controls may be integrally mounted, Control sections

will add length to the heater. Must use control section with PR 240/24, PR 208/24, 208/208 and ATR

Note: If using line voltage thermostat on single phase heaters you cannot exceed 25 Amps due to Amp rating of thermostat. 347, 480, and 600V models can use up to 30 Amps with in-built thermostat.

Power Relay, 18 Amp tested, Must specify coil voltage

Single Pole

Single Pole, rated 25 Amps, 120 to 240 Volts,

Contacts rated up to 277 Volts (must specify )

Coils are 24 Volt; 24 Volt transformer

95PR 120-277/120

302

CUSTOM PAINT COLORS

Durable Powder Coat Paint Finish

COLOR SIZE LIST

Bankers Bronze (Standard) ---

Eggshell White

Black

Gray

Beige

Simulated Bronze

or Clear Anodized

Special Colors 5lb Increment - Consult

ANODIZING CHARGES

204R1 Clear 313R1 Bronze or

Under 100 feet 571

100 feet - 200 feet 390

Over 200 feet ---

Under 100

Factory

Black

feet

LIST

ADDER

Page 61

DBF / DBT Series

DBCT / DBCF Series

Manufactured in U.S.A.Manufactured in U.S.A.

DBT Wall Mount

Model-300 WPF Max.

DBF Floor Mount

Model-250 WPF Max.

Cabinet Dimensions: 3-1/2” x 6” x 10’ Maximum Length

Not suitable for residential applications. Built to order:

consult factory for lead time.

LIST

MODEL

DBF-2/DBT-2

DBF-3/DBT-3

DBF-4/DBT-4

DBF-5/DBT-5

DBF-6/DBT-6

DBF-7/DBT-7

DBF-8/DBT-8

DBF-9/DBT-9

DBF-10/DBT-10

Extended Enclosure per foot

DBF/DBT-100BS

DBF/DBT-200BS

DBF/DBT-300BS

DBF/DBT-400BS

DBF/DBT-500BS

DBF/DBT-600BS

DBF/DBT-700BS

DBF/DBT-800BS

DBF/DBT-900BS

DBF/DBT-1000BS

DBF/DBT IC / Inside Corner Section

DBF/DBT OC / Outside Corner Section

180 - 270 Degrees - 6” longest side

DBF/DBT ECR / Right Hand End Cap

DBF/DBT ECL / Left Hand End Cap

DBF/DBT IECR / Inside Fitting Right End Cap

DBF/DBT IECL / Inside Fitting Left End Cap

DBF/DBT WT / 2”- 6” Wall Trim

DBF/DBT SP / 1 1/2” Splice Plate

DBF/DBT MF / Mullion Front up to 1’

DBF/DBT IF / Inside Filler up to 1’

3/4” Conduit Raceway (standard is 1/2”)

Mesh / 1/4” Wire Mesh under Grill

Pedestals - specify 2” or 3”

Clear Anodized Color Anodized Painted Bronze

Finished

Heater

LENGTH

2’ 404 103 434 129 334 40

3’ 497 145 551 177 394 55

4’ 603 182 651 227 462 50

5’ 717 220 785 276 544 56

6’ 868 259 902 325 664 62

7’ 982 302 1007 380 741 74

8’ 1095 342 1115 38 819 78

9’ 1216 384 1354 484 906 90

10’ 1278 430 1504 538 980 98

1’ 141 76 156 100 103 36

2’ 223 103 253 129 156 40

3’ 302 145 353 177 204 47

4’ 384 183 450 227 253 50

5’ 469 220 551 276 302 56

6’ 551 259 651 325 351 62

7’ 638 302 753 380 408 74

8’ 726 342 906 430 462 78

9’ 814 384 961 484 515 90

10’ 849 910 1104 538 594 98

Accessories

DESCRIPTION

90 - 180 Degrees

See Chart for required amount per Heater

Back

Adder

87 98 48

Blank Section

Finished

Heater

Back Adder

Clear

Anodized

342 470 187

70 70 64

88 95 70

64 95 45

90 100 75

$64.00 per Pedestal

Heater

Color

Anodized

LIST

$6.00 per foot

$7.00 per foot

Back Adder

Finished

Painted

Bronze

NOTE: DBF/DBT Series will permit a Thermostat mounted on one side and a Disconnect on the other side, more or other controls require a 6” or 12” control section. Typically, thermostats are mounted on left side of heater. Control Section will add to length of heater.

DBCT Wall Mount

Model-750 WPF Max.

DBCF Floor Mount

Model-600 WPF Max.

Cabinet Dimensions: 5” x 7” x 10’ Maximum Length

Not suitable for residential applications. Built to order:

consult factory for lead time.

LIST

MODEL / LENGTH

DBCT-2/DBCF-2

2’

DBCT-3/DBCF-3

3’

DBCT-4/DBCF-4

4’

DBCT-5/DBCF-5

5’

DBCT-6/DBCF-6

6’

DBCT-7/DBCF-7

7’

DBCT-8/DBCF-8

8’

DBCT-9/DBCF-9

9’

DBCT-10/DBCF-10

10’

Extended Enclosure per foot

DBCT/DBCF-100BS 1’ DBCT/DBCF-200BS 2’ DBCT/DBCF-300BS 3’ DBCT/DBCF-400BS 4’ DBCT/DBCF-500BS 5’ DBCT/DBCF-600BS 6’ DBCT/DBCF-700BS 7’ DBCT/DBCF-800BS 8’ DBCT/DBCF-900BS 9’

DBCT/DBCF-1000BS 10’

DBCT/DBCF IC / Inside Corner Section

DBCT/DBCF OC / Outside Corner Section

180 - 270 Degrees - 6” longest side

DBCT/DBCF ECR / Right End Plate

DBCT/DBCF ECL / Left End Plate

DBCT/DBCF IECR/ Right End Plate (inside t) DBCT/DBCF IECL/ Left End plate (inside t)

DBCT/DBCF WT / Wall Trim 2” - 6”

DBCT/DBCF SP / 1 1/2” Splice Plate

DBCT/DBCF IF / Inside Filler (up to 1’)

3/4” Conduit Raceway (standard is 1/2”)

Mesh / 1/4” Wire Mesh under Grill

Pedestals - specify 2” or 3”

WATTS/

Accessories

DESCRIPTION LIST

90 - 180 Degrees

Clear Anodized Color Anodized Painted Bronze

FT.

to 250

251-750

to 250

251-750

to 250

251-750

to 250

251-750

to 250

251-750

to 250

251-750

to 250

251-750

to 250

251-750

to 250

251-750

See Chart for required amount per Heater

Finished

Heater

Back

Adder

532

133

627 651 538

555

189

768 811 638

808

240

744 973 750

959

300

1081 1136 863

1153

353

1292 1355 1025

1338

404

1461 1537 1152

1482

466

1613 1701 1259

1648

513

1767 1866 1369

1766

573

1919 2028 1482

105 115 70

Blank Sections

166 93 177 119 120 27

302 132 319 162 2 11 47

430 187 473 220 300 55

562 204 603 283 387 67

689 220 728 353 460 78

823 259 854 420 560 90

952 404 1038 484 647 98

1085 468 1127 549 737 109

1218 513 1259 642 823 120

1349 574 1393 679 911 132

Finished

Heater

Back

Adder

560

161

715

218

849

283

1018

353

1218

420

1415

483

1569

549

1743

642

1919

679

Clear

Anodized

429 587 249

70 70 64

141 161 55

141 161 83

90 105 67

$6.00 per foot

$7.00 per foot

$64.00 per Pedestal

Color

Heater

445

538

631

741

888

1030

1132

1262

1369

Finished

Back

Adder

109

120

133

Painted

Bronz

NOTE: DBCT/DBCF Series will permit a Thermostat mounted on one side and Disconnect on the other side, more or other controls require a 6” or 12” control section. Typically, Thermostats are mounted on left side of heater. Control Section will add to the length of heater.

Page 62

HEATER

BLANK

SECTION

DBTS Series Draft Barrier Heaters

Features

• Bottom air intake.

• Maximum watts per foot: 300.

• Dimensions: Depth 2-5/8'” x Height 4" Length 2’ to 10'.

• 14 gauge Aluminum housing.

• Voltages: 120V / 208V / 240V / 277V - 1 Phase

• No controls can be added without adding a control section and extended enclosure.

Manufactured in U.S.A.

Standard Models

MODEL LENGTH

DBTS-2 2’ 380 105 414 129 314 40

DBTS-3 3’ 501 142 499 177 360 47

DBTS-4 4’ 547 183 589 227 414 50

DBTS-5 5’ 633 223 684 276 480 56

DBTS-6 6’ 769 259 836 325 549 62

DBTS-7 7’ 879 302 941 380 633 74

DBTS-8 8’ 951 342 1043 430 691 78

DBTS-9 9’ 1061 384 1157 484 762 91

DBTS-10 10’ 1162 430 1273 538 836 103

Extended Enclosure per foot 70 78 36

DBTS-100BS 1’ 118 67 129 87 84 36

DBTS-200BS 2’ 183 105 211 129 117 40

DBTS-300BS 3’ 249 142 282 177 149 47

DBTS-400BS 4’ 314 183 355 227 183 50

DBTS-500BS 5’ 380 223 431 276 214 56

DBTS-600BS 6’ 443 259 510 325 249 62

DBTS-700BS 7’ 511 302 586 380 301 74

DBTS-800BS 8’ 571 342 679 430 314 78

DBTS-900BS 9’ 643 384 1098 484 346 91

DBTS-1000BS 10’ 713 430 819 538 576 103

CLEAR ANODIZED COLOR ANODIZED PAINTED BRONZE

HEATER

FINISHED

BACK ADDER

Not suitable for residential applications. 300

watts per foot maximum. Built to order:

consult factory for lead time.

LIST

HEATER

FINISHED

BACK ADDER

HEATER

BACK ADDER

FINISHED

Accessories

MODEL DESCRIPTION

DBTS IC

DBTS OC

DBTS ECR Right Hand End Cap

DBTS ECL Left Hand End Cap

DBTS IECR Inside Fitting Right End Cap

DBTS IECL Inside Fitting Left End Cap

DBTS WT Wall Trim 2” - 6” 64 95 45

DBTS SP Splice Plate 1 1/2” 64 95 45

DBTS MF Mullion Front up to 1’ 64 78 45

Note on order

Inside Corner Section

90° - 180°

Outside Corner Section

180° - 270° - 6” longest side

1/2” Conduit Raceway Standard

Mesh 1/4” Wire Mesh under grill $7.00 per foot

Pedestals - specify 2” or 3” $64.00 per Pedestal

CLEAR ANODIZED COLOR ANODIZED PAINTED BRONZE

342 473 187

70 70 64

84 95 70

LIST

Page 63

RDBT Series ASHDB Series

Cabinet Dimensions: 7” x 6” x 10’

Maximum Length

Not suitable for residential

applications. 300 Watts Per Foot

Maximum. Pedestals included with

unit. Rounded enclosure with at

top discharge. Special Build: consult

Manufactured in U.S.A.

factory for lead time.

LIST

MODEL LENGTH

RDBT-PD-2 2’ RDBT-PD-3 3’ RDBT-PD-4 4’ RDBT-PD-5 5’ RDBT-PD-6 6’ RDBT-PD-7 7’ RDBT-PD-8 8’ RDBT-PD-9 9’

RDBT-PD-10 10’

Extended Enclosure per foot

Clear

Anodized

Color

Anodized 750 819 557 954 1045 658

1174 1308 777 1400 1567 905 1633 1833 1045 1868 2102 1181 2103 2367 1317 2340 2638 1452 2577 2909 1611

167 193 87

Painted

Bronze

Blank Sections

RDBT-PD-100BS 1’ RDBT-PD-200BS 2’ RDBT-PD-300BS 3’ RDBT-PD-400BS 4’ RDBT-PD-500BS 5’ RDBT-PD-600BS 6’ RDBT-PD-700BS 7’ RDBT-PD-800BS 8’ RDBT-PD-900BS 9’

RDBT-PD-1000BS 10’

Accessories

Description

423 453 309 566 721 408 840 939 515

1043 1220 620 1257 1422 726 1464 1584 833 1673 1813 937 1887 2048 1045 2093 2276 1150 2304 2508 1276

Clear

Anodized

Color

Anodized

Painted

Bronze

LIST

RDBT-PDIC / Inside Corner Section

RDBT-PDOC / Outside Corner Section

90 - 180 Degrees

66 75 54

180 - 270 Degrees - 6” longest side

RDBT-PDIECR/Inside Fitting Right End Cap

RDBT-PDIECL/Inside Fitting Left End Cap

3/4” Conduit Raceway (standard is 1/2”)

Mesh - 1/4” Wire Mesh under Grill

164 213 95

$6.00 per Foot $7.00 per Foot

NOTE: RDBT-PD Series will permit a Thermostat mounted on one side and a Disconnect on the other side. More or other controls require a 6” or 12” control section. Typically, Thermostats are mounted on the left side of heater. Control Sections will add to length of heater.

CB Series

LIST

Clear Anodized Color Anodized Painted Bronze

Finished

Heater

Back

Adder

365 105 384 129 298 40 440 142 473 177 342 47 515 183 560 227 384 50 594 223 647 276 430 56 730 259 798 325 532 62 814 302 888 380 586 74 902 342 988 430 638 78 988 384 1088 493 691 91

1074 430 1186 538 748 103

64 74 30

Blank Sections 110 76 122 100 78 36 183 105 191 129 105 40 230 142 263 177 132 47 288 183 334 227 162 50 353 223 404 276 186 56 414 259 479 325 214 62 479 302 557 380 247 74 545 342 632 430 282 78 613 384 715 493 319 91 684 430 798 538 328 103

Heater

Finished

Back

Adder

Heater

Manufactured in U.S.A.

Not suitable for residential

applications. Bottom inlet

only. Built to order: consult

factory for lead time.

Cabinet Dimensions: 2-5/8” x 4-1/2” x 10’

Maximum Length

NOTE: CB Series will permit either a Thermostat or a Disconnect on only one side of the heater. More or other controls require a control section. Typically, Thermostats are mounted on the right side of heater. Control Sections will add to length of heater.

Model Length

CB-2 2’ CB-3 3’ CB-4 4’ CB-5 5’ CB-6 6’ CB-7 7’ CB-8 8’ CB-9 9’

CB-10 10’

Extended Enclosure

per foot

CB-100BS 1’ CB-200BS 2’ CB-300BS 3’ CB-400BS 4’ CB-500BS 5’ CB-600BS 6’ CB-700BS 7’ CB-800BS 8’ CB-900BS 9’

CB-1000BS 10’

Finished

Back

Adder

Not suitable for residential applications.

500 Watts per foot maximum. 16 gauge

Steel enclosure, 18 gauge backplate.

Heights may vary from 8” up to 20.”

Bottom Intake / Top Discharge. Special

build - consult factory for lead time.

Cabinet Dimensions: 5-1/2” x 8”

thru 20” x 10’ Maximum Length.

Cannot be Anodized

MODEL / LENGTH

ASHDB-2

2’

ASHDB-3

3’

ASHDB-4

4’

ASHDB-5

5’

ASHDB-6

6’

ASHDB-7

7’

ASHDB-8

8’

ASHDB-9

9’

ASHDB-10

10’

Extended Enclosure per foot 51 65 78

ASHDB-8/20-100BS 1’ 143 43 174 64 183 74 ASHDB-8/20-200BS 2’ 194 48 228 67 276 77 ASHDB-8/20-300BS 3’ 253 50 283 83 356 80 ASHDB-8/20-400BS 4’ 278 55 346 76 440 86 ASHDB-8/20-500BS 5’ 330 60 404 78 521 90 ASHDB-8/20-600BS 6’ 393 56 466 110 603 98 ASHDB-8/20-700BS 7’ 462 74 511 90 708 103 ASHDB-8/20-800BS 8’ 504 78 569 95 792 110 ASHDB-8/20-900BS 9’ 562 83 642 100 885 115

ASHDB-8/20-1000BS 10’ 620 90 709 108 914 142

ASHDB IC / Inside Corner Section

ASHDB OC / Outside Corner Section

180 - 270 Degrees - 6” longest side

ASHDB ECR / Right End Cap

ASHDB SP / 1 1/2” Splice Plate ASHDB WT / 2” - 6” Wall Trim

3/4” Conduit Raceway ( standard is 1/2”) $6.00 per Foot

Mesh / 1/4” Wire Mesh under Grill $7.00 per Foot

WATTS/

FT.

to 250 466

251-500 533 587 668

to 250 545

251-500 538 668 538

to 250 615

251-500 684 750 888

to 250 679

251-500 758 836 999

to 250 798

251-500 870 943 1136

to 250 934

251-500 1008 1071 1292

to 250 1090

251-500 1146 1225 1440

to 250 1211

251-500 1283 1376 1594

to 250 1346

251-500 1422 1531 1748

Accessories 8-12” High 13-16” High 17-20” High Description LIST

90 - 180 Degrees

ASHDB ECL / Left End Cap

Pedestals - Specify 2” or 3” $64.00 per Pedestal

NOTE: ASHDB Series will permit a Thermostat mounted on one side and a Disconnect on the other side, more or other controls require a 6” or 12” control section. Typically, Thermostats are mounted on left side of heater. Control Section will add to length of heater.

Accessories

Description LIST

CB IC / Inside Corner Section

90 - 180 Degrees

CB OC / Outside Corner Section

180 - 270 Degrees - 6” longest side

CB ECR / Right End Cap

CB ECL / Left End Cap CB WT / Wall Trim 2” - 6” CB SP / Splice Plate 1 1/2”

CB MF / Mullion Front up to 1’

1/2” Conduit Raceway

Mesh / 1/4” Wire Mesh under Grill

Pedestals - specify 2” or 3”

See Chart for required amount per Heater

8-12” High 13-16” High 17-20” High

Finished

Heater

See Chart for required amount per Heater

Back

Adder

Blank Sections

Manufactured in U.S.A.

LIST

Finished

Heater

Back

Adder

511

1146

1299

1452

305 320 336

593

676

760

865

990

103

108

115

52 83 109

Clear

Anodized

342 473 187

70 70 64

64 78 45

64 86 45

Standard

$7.00 per foot

$64.00 per Pedestal

Heater

Color

593

703

809

919

1061

1213

1367

1519

1673

Finished

Back

Adder

100

105

109

117

120

127

132

142

Painted

Bronze

Page 64

MR Series Heavy Duty Metal Sheath Electric Infrared Heater

Heavy Duty Overhead Infrared Heaters for Indoor Spot Heating, Zone or Total Area

Heating Applications

• High-Density radiant heat, with 60° symmetric heat pattern.

Manufactured in U.S.A.

MR-2/4 KW

MR-6/13 KW

MR Series Safety Note

Ground fault protection must be used. To avoid potential hazards use model GF-SK-1 ground fault sensing switch with these heaters. This device is designed to provide a reliable way to quickly terminate power to the heaters in the event of a ground fault occurrence.

Standard Models

UPC#

686334

135177 MR-212-1 1.8* 6,143 120 1 135184 MR-220-1 135214 MR-224-1 240 8.5 135221 MR-227-1 277 7.2 135238 MR-248-1 480 4.2 135245 MR-257-1 600 3.3 135306 MR-420-1 135320 MR-424-1 240 18.8 135337 MR-427-1 277 16.3 135344 MR-448-1 480 9.5 135351 MR-457-1 600 7.5 135368 MR-620-3 135375 MR-624-3 240 14.5 25.0 135382 MR-627-3 277 N/A 21.7 135412 MR-648-3 480 7.5 13.0 135429 MR-657-3 600 5.8 10.0 135115 MR-1320-3 135122 MR-1324-3 240 33.0 135139 MR-1327-3 277 135153 MR-1348-3 480 17.0 29.0 135160 MR-1357-3 600 13.6 135252 MR-2720-3 135269 MR-2724-3 240 64.8 135283 MR-2748-3 480 32.4 135290 MR-2757-3 600 26.7

Note: Some 3-Phase models can be eld converted to single phase operation.

MODEL KW BTU’S VOLTS PHASE

208

2.0 6,826

208

4.5 15,359

208

6.0 20,478

208

13.5 46,076

208

27* 92,151

3 or 1

• ETL Listed for suspended high-bay indoor applications

• Rugged straight metal sheath elements installed, great for high vibration areas.

• Gold anodized Aluminum housing for efcient, long term reectivity & corrosion resistance.

• Terminal box with high-temp Silicone wire.

• Single or three phase wiring.

• ”L” brackets included for chain suspension, or rigid mounting.

AMPS

3-Ph 1-Ph

15.0

9.6

N/A

21.6

17.0 29.0

37.5

N/A 48.8

74.8

N/A

WT.

(Lbs.)

15.0 519 449069 HDWG-4 69

27.0 814 449076 HDWG-6 88

43.0 1261 449083 HDWG-13 151

288.0

Crated

LIST

9.0 410 449090 HDWG-2 57

2715 883047 HDWG-27 307

Optional Wireguards

UPC#

686334

MODEL LIST

Heavy Duty Metal Sheath Infrared Control Options

CONTROL FEATURES:

• (GF-SK-1) Positive “off” and built-in “on/off” rocker switch illuminates “red” during operation.

• Controls cannot be mounted directly on unit. Must use 6” minimum threaded conduit.

UPC

686334

486026 GF-SK-1

589376 DC-SK-1

MODEL DESCRIPTION

Ground Fault

Sensing Switch

Disconnect

Switch

RATING

(VAC)

208V - 600V

50A

120V - 600V

50A

Dimensions (In)

Ht. Wd. Dp.

10.3 10.3 5.0 12 737

5.0 6.0 4.0 5 360

WT.

(lbs.)

LIST

Page 65

MR Series Heavy Duty Metal Sheath Electric Infrared Heater

Note: The MR-27 Series includes (2) Terminal Box Assemblies, located on each end of the heater, requiring an electrical service to each end.

MR-27 KW

Manufactured in U.S.A.

MR Series Dimensions & Reector Pattern

DIMENSIONS (in.)

SERIES A B C

LENGTH WIDTH DEPTH

MR-2 28 9 7.25

MR-4 48.5 9 7.25

MR-6 30 19.88 7.5

MR-13 50.5 19.88 7.5

MR-27 96.75 28.25 14.88

60° Symmetric

NOTE: Take into account that the MR Series is designed with a 60° symmetrical

reector heat pattern. The sizing chart can

assist you based upon your mounting height.

Mounting Clearances & Recommended Mounting Height

Mounting Clearances Recommended Mounting Height

24” from ceiling

All MR Models

36” from vertical surface & from another heater

72” from face of heater to combustible surface

MR-27 Only 87” from face of heater to combustible surface 27.0 KW 15’ - 30’

1.8 & 2.0 KW 8’ - 10’

4.5 KW 8’ - 12’

6.0 KW 10’ - 14’

13.5 KW 12’ - 16’

Sizing Chart

Mounting

Height

8’

10’

12’

14’

16’

18’

20’ MR-27 28 23 644 41.9

24’ MR-27 33 27 891 30.3

30’ MR-27 41 32 1312 20.6

Heater

Model

MR-2 8 8 64 31.3

MR-4 9 8 72 62.5

MR-2 11 10 110 18.2

MR-4 11 10 110 40.9

MR-6 12 10 120 50.0

MR-4 12 11.5 138 32.6

MR-6 14 12 168 35.7

MR-13 15 13 195 69.2

MR-6 16 14 224 26.8

MR-13 18 16 288 46.9

MR-6 18 16 288 20.8

MR-13 21 18 378 35.7

MR-27 24 19 456 59.2

MR-13 23 20 460 29.3

MR-27 28 20 560 48.2

Length Wide

Coverage

(Sq. Ft.)

Watts / Sq.

Ft.

Product Specications

Housing:

.040 Gold anodized Aluminum housing for efficient, long-term reflectivity and corrosion resistance. Highdensity radiant heat. Housing is ETL Listed for indoor, dry environment applications only.

Reflector:

60 degree symmetric heat pattern.

Elements:

Rugged straight metal sheath elements. .430” diameter Incoloy 840 metal sheath. Nickel-Chrome alloy coiled filament imbedded within a Magnesium Oxide insulating powder and threaded end terminations. Available wattages in 1800, 2000, and 4500 Watts per element. Available in standard voltages from 120 to 600 Volts.

Controls:

Heavy Duty, Metal Sheath heaters are not manufactured with any control device on the unit. All controls and accessories should be specified as remote mounted. Please consult the technical sales department of factory for help in determining applicable controls. Please follow installation instructions that accompany each heater.

Accessories:

Wire guards and power contactor panels.

Page 66

TH & THSS Series Mul-T-Mount Electric Infrared Heater

Overhead Infrared Heaters for Snow & Ice Control, Outdoor Spot Heating & All Indoor

Heating Applications

Product Description

AVAILABLE IN 2 LAMP BROWN ENAMEL OR STAINLESS STEEL,

OR 3 LAMP STAINLESS STEEL.

• Listed for suspended, totally exposed (outdoor), high-bay (indoor) comfort heating and exterior snow & ice control applications.

• Listed for recessed applications.

• 20 gauge painted steel or stainless steel housings.

• Gold anodized Aluminum reectors & end caps.

• 50% higher Watt densities for 3-element units.

• 2-Lamp wiring, single phase.

• 3-Lamp wiring, three or single phase.

• Stainless steel models have non-corrosive housing, hardware and brackets; no ferrous metals used in the unit. Durable in harsh

Manufactured in U.S.A.

atmospheres & outdoor environments.

• High temperature lead wires.

• Clear Quartz Lamp(s) Included.

New Feature:

In-Built surface mounting brackets

allows for xture adjustment up to

45° horizontal tilt.

Mounting Clearances & Recommended Mounting Height

Mounting Clearances Recommended Mounting Height

2 & 3 Lamp

Models

2 Lamp Models

3 Lamp Models

72” from face of heater to combustible

96” from face of heater to combustible

3” from ceiling

24” from vertical surface

surface

In-built surface

mounting

brackets

attached to

the top wiring

channel.

Product Dimensions

Mul-TMount Series Length Width Height Mtg. Ctr.

222 24" 15" 10-7/8" 23-1/2" 342 33" 15" 10-7/8" 32-1/2" 462 46" 15" 10-7/8" 45-1/2" 223 24" 21-1/2" 10-7/8" 23-1/2" 343 33" 21-1/2" 10-7/8" 34" 463 46" 21-1/2" 10-7/8" 45-1/2"

30° Symmetric & A30° Asymmetric Reector -

60° Symmetric & A60° Asymmetric Reector -

30° Symmetric & A30° Asymmetric Reector -

0 to 45o tilt @

15o increments

A B C D

90° Symmetric Reector

Dimensions (in.)

Indoor

- Indoor

Outdoor

14’ - 30’

12’ - 18’

8’ - 12’

8’ - 10’

Page 67

TH & THSS Series Mul-T-Mount Electric Infrared Heater

30° Symmetric

60° Symmetric

90° Symmetric

30° Asymmetric

60° Asymmetric

Product SpecicationsReector Patterns

Series: 222, 342, 462 (Painted Version) 2-lamp 222, 342, 462 (Stainless Steel Version) 2-lamp 223, 343, 463 (Stainless Steel Version) 3-lamp

Housing:

20 gauge Galvanized Steel with a baked on, brown enamel (painted) nish. Housing is

ETL Listed for both indoor and totally exposed outdoor applications. 20 gauge Stainless Steel for durability and corrosion-resistance. Housing is ETL Listed for both indoor and totally exposed outdoor applications.

Reectors and End Caps:

.040 Gold anodized Aluminum reectors and end caps for superior reectivity. Five choices of reector patterns including 30 degree narrow (symmetric & asymmetric), 60

degree medium (symmetric & asymmetric), and 90 degree wide (symmetric).

Elements:

Clear quartz lamps. Coiled tungsten lament located within a sealed quartz envelope, halogen lled, with porcelain end caps and 6” wire pigtail leads. 96% radiant delivered efciency with high moisture and thermal shock resistance. Instantaneous heat-up

and cool-down performance. Available wattages from 500 to 3800 Watts per element. Available voltages from 120 to 600 Volts.

Controls:

Mul-T-Mount heaters are not manufactured with any control device on the unit. All

controls are accessories and should be specied as such. Please consult the technical

sales department of factory for help in determining applicable controls. Please follow installation instructions that accompany each heater.

Accessories:

Recessed mounting frames (painted or stainless steel), adjustable mounting brackets (stainless steel only), vertical mounting brackets (stainless steel only), wire guards, thermostats, snow detectors, SCR controllers, and power contactor panels.

Sizing Chart

Mounting Heights (FT.) Watts Delivered per Square Foot

8 10 12 14 16 18 20

Reective

30º 3.2

60º 3.2 10.5 x 9.5 13 x 12 15 x 14 17 x 16

90º 3.2 17 x 16 21 x 20 N / R N / R 11.8 7.6 - - - - -

30º 5.0 6 x 4 7.5 x 5.5 8.5 x 6.5 9.5 x 7.5 10.5 x 8.5 11.5 x 9.5 12.5 x 10.5 208.3 121.2 90.5 70.2 56.0 45.8 38.1

60º 5.0 11.5 x 9.5 14 x 12 16 x 14 18 x 16 20.5 x 18.5 23 x 21

90º 5.0 18 x 16 22 x 20 26 x 24 N / R N / R N / R 17.4 11.4 8.0 - - - -

30º 7.3 N / R 8.5 x 5.5 9.5 x 6.5 10.5 x 7.5 11.5 x 8.5 12.5 x 9.5 13.5 x 10.5 - 156.1 118.2 92.7 74.7 61.5 51.5

60º 7.3 12 x 10.5 15 x 12 17 x 14 19 x 16 21.5 x 18.5 24 x 21

90º 7.3 19 x 16 23 x 20 27 x 24 N / R N / R N / R 24.0 15.9 11.3 - - - -

30º 4.8

60º 4.8 10.5 x 10.5 13 x 13 15 x 15 17 x 17 21 x 21

90º 4.8 17 x 17 21 x 21 N / R N / R N / R 16.6 10.9 - - - - -

30º 7.5 N / R 7.5 x 6.5 8.5 x 7.5 9.5 x 8.5 10.5 x 9.5 11.5 x 10.5 12.5 x 11.5 - 153.8 117.6 92.9 75.2 62.1 52.2

60º 7.5 11.5 x 10.5 14 x 13 16 x 15 18 x 17 20.5 x 19.5 23 x 22

90º 7.5 18 x 17 22 x 21 26 x 25 N / R N / R N / R 24.5 16.2 11.5 - - - -

30º 10.95 N / R 8.5 x 6.5 9.5 x 7.5 10.5 x 8.5 11.5 x 9.5 12.5 x 10.5 13.5 x 11.5 - 198.2 153.7 122.7 100.2 83.4 70.5

60º 10.95 12 x 11 15 x 13 17 x 15 19 x 17 21.5 x 19.5 24 x 22 N / R 83.0 56.2 42.9 33.9 26.1 20.7 -

90º 10.95 19 x 17 23 x 21 27 x 25 N / R N / R N / R N / R 33.9 22.7 16.2 - - - -

(kW)

Pattern ( º )

Heater Output

# of Qtz. Lamps

L x W L x W L x W L x W L x W L x W L x W

5.5 x 4 6.5 x 5.5 7.5 x 6.5 8.5 x 7.5 9.5 x 8.5 10.5 x 9.5 11.5 x 10.5

2 - Quartz Lamp Heaters

5.5 x 5 6.5 x 6.5 7.5 x 7.5 8.5 x 8.5 9.5 x 9.5 10.5 x 10.5 11.5 x 11.5 174.5 113.6 85.3 66.4 53.2 43.5 36.3

3 - Quartz Lamp Heaters

Heat Pattern Coverage @ Floor Level

N / R N / R N / R

N / R

N / R N / R

N / R

8 10 12 14 16 18 20

145.5 89.5 65.6 50.2 39.6 32.1 26.5

32.1 20.5 15.2 11.8 - - -

45.8 29.8 22.3 17.4 13.2 10.4 -

57.9 40.6 30.7 24.0 18.4 14.5 -

43.5 28.4 21.3 16.6 10.9 - -

62.1 41.2 31.3 24.5 18.8 14.8 -

Mounting Heights (FT.)

Page 68

TH & THSS Series Mul-T-Mount Electric Infrared Heater

2 Lamp Mul-T-Mount Series

Brown Enamel Or Stainless Steel With 2 Clear Quartz Lamps Included

BROWN HOUSING

UPC#

686334

444163 222-30-TH-208V 444408 222-30-THSS-208V

444170 222-30-TH-240V 444415 222-30-THSS-240V 240 63016249

444187 222-30-TH-277V 444422 222-30-THSS-277V 277 63016279

481380 222-30-TH-480V 481434 222-30-THSS-480V 480 63016489

444194 222-A30-TH-208V 444439 222-A30-THSS-208V 208

444200 222-A30-TH-240V 444446 222-A30-THSS-240V 240 63016249

444217 222-A30-TH-277V 444453 222-A30-THSS-277V 277 63016279

481410 222-A30-TH-480V 481465 222-A30-THSS-480V 480 63016489

444224 222-60-TH-208V 444460 222-60-THSS-208V 208

444231 222-60-TH-240V 444477 222-60-THSS-240V 240 63016249

444248 222-60-TH-277V 444484 222-60-THSS-277V 277 63016279

481397 222-60-TH-480V 481441 222-60-THSS-480V 480 63016489

444255 222-A60-TH-208V 444491 222-A60-THSS-208V 208

444262 222-A60-TH-240V 444507 222-A60-THSS-240V 240 63016249

444279 222-A60-TH-277V 444514 222-A60-THSS-277V 277 63016279

481427 222-A60-TH-480V 481472 222-A60-THSS-480V 480 63016489

443296 222-90-TH-208V 444521 222-90-THSS-208V 208

444286 222-90-TH-240V 444538 222-90-THSS-240V 240 63016249

444293 222-90-TH-277V 444545 222-90-THSS-277V 277 63016279

481403 222-90-TH-480V 481458 222-90-THSS-480V 480 63016489

481083 342-30-TH-208V 480932 342-30-THSS-208V

481090 342-30-TH-240V 480949 342-30-THSS-240V 240 63025249

802611 342-30-TH-480V 802635 342-30-THSS-480V 480 63025489

481175 342-A30-TH-208V 481021 342-A30-THSS-208V 208

481182 342-A30-TH-240V 481038 342-A30-THSS-240V 240 63025249

444316 342-A30-TH-480V 444569 342-A30-THSS-480V 480 63025489

481113 342-60-TH-208V 480963 342-60-THSS-208V 208

481120 342-60-TH-240V 480970 342-60-THSS-240V 240 63025249

802918 342-60-TH-480V 802932 342-60-THSS-480V 480 63025489

481205 342-A60-TH-208V 481052 342-A60-THSS-208V 208

481212 342-A60-TH-240V 481069 342-A60-THSS-240V 240 63025249

444330 342-A60-TH-480V 444583 342-A60-THSS-480V 480 63025489

481144 342-90-TH-208V 480994 342-90-THSS-208V 208

481151 342-90-TH-240V 481007 342-90-THSS-240V 240 63025249

803212 342-90-TH-480V 803236 342-90-THSS-480V 480 63025489

802710 462-30-TH-480V 802734 462-30-THSS-480V

444361 462-A30-TH-480V 444613 462-A30-THSS-480V 30° Asymmetrical 63036489

803014 462-60-TH-480V 803038 462-60-THSS-480V 7.3 60° Symmetrical 63036489

444385 462-A60-TH-480V 444637 462-A60-THSS-480V 60° Asymmetrical 63036489

803311 462-90-TH-480V 803335 462-90-THSS-480V 90° Symmetrical 63036489

MODEL

NOTE: Consult the factory, the product instruction manual, or a licensed electrician for 3-phase wiring of all 2-element heaters.

STAINLESS STEEL

HOUSING

UPC#

686334

KW BTU’S VOLTS

MODEL Brown

3.2 10,922

5.0 17,065

24,915 480

REFLECTOR

PATTERN

208

30° Symmetrical

30° Asymmetrical

60° Symmetrical

60° Asymmetrical

90° Symmetrical

208

30° Symmetrical

30° Asymmetrical

60° Symmetrical

60° Asymmetrical

90° Symmetrical

30° Symmetrical 63036489

Replacement

Element

63016209

63025209

WT.

(Lbs.)

20 631 762

25 832 1066

32 1045 1281

LIST

Stainless

Steel

Page 69

TH & THSS Series Mul-T-Mount Electric Infrared Heater

3 Lamp Mul-T-Mount Series

Brown Enamel Or Stainless Steel Housing With 3 Clear Quartz Lamps Included

NOTE:

• 600-Volt Models also available, contact factory for more information.

• Asymmetrical pattern units are also available for 30° & 60°

Manufactured in U.S.A.

BROWN HOUSING

UPC#

686334

487481 223-30-TH-208V 443678 223-30-THSS-208V 487498 223-30-TH-240V 443685 223-30-THSS-240V 240 63016249 487504 223-30-TH-277V 443692 223-30-THSS-277V 277 63016279 487511 223-30-TH-480V 481588 223-30-THSS-480V 480 63016489 487528 223-60-TH-208V 443289 223-60-THSS-208V 208 487535 223-60-TH-240V 443739 223-60-THSS-240V 240 63016249 487542 223-60-TH-277V 443746 223-60-THSS-277V 277 63016279 487559 223-60-TH-480V 481595 223-60-THSS-480V 480 63016489 487566 223-90-TH-208V 443784 223-90-THSS-208V 208 487573 223-90-TH-240V 443791 223-90-THSS-240V 240 63016249 487580 223-90-TH-277V 443807 223-90-THSS-277V 277 63016279 487597 223-90-TH-480V 481601 223-90-THSS-480V 480 487603 343-30-TH-208V 481236 343-30-THSS-208V 487610 343-30-TH-240V 481243 343-30-THSS-240V 240 63025249 487627 343-30-TH-480V 811439 343-30-THSS-480V 480 63025489 487634 343-60-TH-208V 481267 343-60-THSS-208V 208 487641 343-60-TH-240V 481274 343-60-THSS-240V 240 63025249 487658 343-60-TH-480V 811637 343-60-THSS-480V 480 63025489 487665 343-90-TH-208V 481298 343-90-THSS-208V 208 487672 343-90-TH-240V 481304 343-90-THSS-240V 240 63025249 487689 343-90-TH-480V 811835 343-90-THSS-480V 480 63025489 487696 463-30-TH-480V 810531 463-30-THSS-480V 487702 463-60-TH-480V 810739 463-60-THSS-480V 10.95 60° Sym. 63036489 487719 463-90-TH-480V 810937 463-90-THSS-480V 90° Sym. 63036489

MODEL

STAINLESS STEEL

HOUSING

UPC#

686334

208

480

REFLECTOR

PATTERN

30°

Symmetrical

60°

Symmetrical

90°

Symmetrical

30°

Symmetrical

60°

Symmetrical

90°

Symmetrical

30° Sym. 63036489

KW BTU’S VOLTS

MODEL Brown

4.8 16382

7.5

25298

37372

Replacement

Element

63016209

63016489 63025209

63025209

WT.

(Lbs.)

25 1032 1163

33 1248 1482

41 1499 1735

LIST

Stainless

Steel

TH & THSS Series Product Accessories

UPC#

686334

881128 VMB-41-SS Wall Mounting Brackets (2) All Mul-T-Mount Models 12 208 851152 CHWG-222

851145 CHWG-342 342 Series 74 851626 CHWG-462 462 Series 101 854368 CHWG-223 223 Series 69 854351 CHWG-343 343 Series 90 854344 CHWG-463 463 Series 105

441995 RMF-222-SS-A 27 x 17-7/8 29-1/8 x 20 222 Series Stainless 449441 RMF-222-A 27 x 17-7/8 29-1/8 x 20 222 Series Painted 168 442077 RMF-342-SS-A 36 x 17-7/8 38-1/8 x 20 342 Series Stainless 441872 RMF-342-A 36 x 17-7/8 38-1/8 x 20 342 Series Painted 169 442107 RMF-462-SS-A 49 x 17-7/8 51-1/8 x 20 462 Series Stainless 449458 RMF-462-A 49 x 17-7/8 51-1/8 x 20 462 Series Painted 215

881104 RMF-223-SS 32 x 29-3/8 34-1/8 x 31-1/2 223 Series Stainless 15 349

881135 RMF-343-SS 41 x 29-3/8 43-1/8 x 31-1/2 343 Series Stainless 18 410

88 1111 RMF-463-SS 54 x 29-3/8 56-1/8 x 31-1/2 463 Series Stainless 20 500 487726 RMF-223 32 x 29-3/8 34-1/8 x 31-1/2 223 Series Painted 15 280 487733 RMF-343 41 x 29-3/8 43-1/8 x 31-1/2 343 Series Painted 18 294 487740 RMF-463 54 x 29-3/8 56-1/8 x 31-1/2 463 Series Painted 20 366 440783 31939009 440738 31940009 Reduces Quartz Lamp All 2500W Qtz. Lamp 112 440745 31941009 446150 632-1620 Red Quartz Lamps; 1.6kw, 208v 446167 632-1624 Red Quartz Lamps; 1.6kw, 240v 144 446228 632-2548 Red Quartz Lamps; 2.5kw, 480v 342 & 343 Series 169

MODEL DESCRIPTION FOR USE WITH

222 Series

Stainless Steel Wire Guards

Recessed Mounting Frames (UL)

Ceiling Cutout (in.) Frame Size (in.)

Red Vycor Sleeves

Brightness by 90%

All 1600W Qtz. Lamp

All 3650W Qtz. Lamp 138

222,223 & RPH Series

WT.

(LBS.)

LIST

230

285

349

144

Page 70

OCH Series Outdoor / Indoor Rated Quartz Electric Infrared Heater

Features

• Frosted Quartz Tube heating element (included)

• Listed for suspended, totally exposed (outdoor) and indoor spot heating applications

• Finish: High-temp brown powder coated nish or corrosion

Heats solid objects, not the air!

Manufactured in U.S.A.

FINISH - BROWN FINISH - STAINLESS STEEL

Includes Electrical Enclosure

UPC#

686334

MODEL LIST

UPC#

686334

Product Models

MODEL LIST

resistant stainless steel 24 gauge housing

• 60° Symmetric Heat Pattern

• Gold anodized Aluminum reector and end caps

• Painted models are direct wire, unless specied and are supplied with 6” lead wires for eld connection in the

internal wiring compartment. These models are available with a factory installed 6’ cord set. The 208V model must

have a eld supplied plug.

• Stainless steel models include an electrical enclosure assembled to the end of the heater housing and (2) 6” long

lead wires for direct eld connection.

• Two 2’ ft. long mounting chains and four S-Hooks included

• The OCH-Series can be surfaced mounted using the supplied mounting brackets which allow up to a 45° horizontal tilt adjustment.

CONNECTION

TYPE

WATTS BTU’S VOLTS AMPS

Qtz. Tube

Repl.

Element

WT.

(LBS.)

480444 OCH-46-120VE

480451 OCH-46-208VE 480536 OCH-46-208V-SSE 2000 6826 208 9.6 671-5061

480468 OCH-46-240VE 480543 OCH-46-240V-SSE 2000 6826 240 8.3 671-3785

480475 OCH-46-277VE 480550 OCH-46-277V-SSE 2000 6826 277 7.2 671-5018

480499 OCH-57-208VE

480482 OCH-57-240VE 480567 OCH-57-240V-SSE 3000 10239 240 12.5 671-3786

480505 OCH-57-277VE 480581 OCH-57-277V-SSE 3000 10239 277 10.8 671-5059

480512 OCH-57-480VE 480598 OCH-57-480V-SSE 2250 7679 480 4.7 671-5058

485975 OCH-46-120VCE 340 --- --- ---

485982 OCH-57-208VCE

485999 OCH-57-240VCE --- --- --- 2000 6826 240 8.3 671-3785

480529 OCH-46-120V-SSE

315

480574 OCH-57-208V-SSE

360

--- --- --- 2000 6826 208 9.6 671-5061

400

1500 5120 120 12.5 671-3784

370

Hard Wire

3000 10239 208 14.4 671-5060

410

1500 5120 120 12.5 671-3784 11

Corded

Product Accessories

UPC #

686334

480888 OCHWG-46

480895 OCHWG-57 OCH-57 Series Models 2 59

MODEL DESCRIPTION FOR USE WITH

OCH-46 Series Models 2 56

Stainless Steel Wire Guards

WT.

(LBS.)

LIST

881128 VMB-41-SS Wall Mtg. Brackets (2) ALL OCH Models 12 208

445948 VHC-15 Variable Heat Controller 208/240V OCH Models Only 3 162

485357 VHC-32 Variable Heat Controller 208/240V OCH Models Only 3 422

Page 71

OCH Series Outdoor / Indoor Rated Quartz Electric Infrared Heater

OCH Sizing Chart

Mounting Height Heater Model Watts

7’

8’

9’

10’

12’

OCH-46 1500 11 9 99 15.2

OCH-46 2000 11 9 99 20.2

OCH-46 1500 12 10 120 12.5

OCH-46 2000 12 10 120 16.7

OCH-57 3000 13 10 130 23.1

OCH-57 2250 13 10 130 17.3

OCH-46 1500 13 11 143 10.5

OCH-46 2000 13 11 143 14.0

OCH-57 3000 14 11 154 19.5

OCH-57 2250 14 11 154 14.6

OCH-57 3000 15 12 180 16.7

OCH-57 2250 15 12 180 12.5

OCH-57 3000 17 14 238 12.6

OCH-57 2250 17 14 238 9.5

Heat Pattern Coverage ( at oor level)

Length Width Sq. Ft.

Total Watts /

Sq. Ft.

Product Specications

Series:

OCH-46 & OCH-57

Housing:

24 gauge Aluminized Steel with a baked on brown powder coat finish. Housing is cETLus Listed for indoor or outdoor applications. Horizontal mounting only.

Reflectors and End Caps:

.040 Gold anodized Aluminum reflectors and end caps for superior reflectiveness. 60 degree medium (symmetric) pattern only.

Elements:

Quartz Tubes. Frosted quartz envelope with a Nickel-Chromium coiled filament, porcelain end caps, and threaded-screw (stud) terminations. Fast heat-up and cool-down performance. Available Wattages from 1500 to 3000 Watts per element. Available voltages from 120 to 480 Volts.

Controls:

OCH Series heaters are not manufactured with any control device on the unit. All controls are accessories and should be specified as such. Please consult the technical sales department of factory for help in determining applicable controls. Please follow installation instructions that accompany each heater.

Accessories:

Adjustable mounting brackets (stainless steel only), vertical mounting brackets (stainless steel only), wire guards, thermostats, SCR controllers, and power contactor panels.

Mounting Congurations & Reector Pattern

Mounting

• Chain, surface mount or use our vertical mounting bracket as shown below. (Note:) All units must be mounted horizontally.

• In-Built surface mounting bracket allows for xture adjustment up to a 45° horizontal tilt.

• As shown, the heater may be suspended at any horizontal angle desired.

Chain Mount:

(Chain supplied)

Reector Pattern:

OCH-46

Length: 44.4’’

Width: 5.4’’

Height: 6.5’’

OCH-57

Length: 55.4’’

Width: 5.4’’

Height: 6.5’’

Optional Vertical Mounting Bracket:

Model # VMB-41-SS

Mounting Clearances & Recommended Mounting Height

Mounting Clearances Recommended Mounting Height

3” from ceiling; 12” from vertical surface

72” from face of heater to combustible surface

36” from another heater

OCH-46 7’-9’

OCH-57 8’-10’

Page 72

RPH Series Outdoor Rated Stainless Steel Electric Infrared Heater

• Instant, high-intensity radiant heat, with 30° symmetric heat pattern.

• Listed for indoor spot heating and for outdoor unprotected applications.

• Specialized Ruby “Red” Quartz Lamp infrared heating element for glare reduction.

• Stainless Steel housing with Coilzak Aluminum reector for good reectivity & corrosion

resistance.

• Heating element and mounting plate included.

Manufactured in U.S.A.

• Dimensions: 24” x 5-3/8” x 4-1/2.”

Mounting Clearances Recommended Mounting Height

Mounting Plate (provided) on top center allows heater to be mounted parallel or angled using a standard pipe nipple and box cover (supplied by installer)

6” from ceiling

24” from vertical surface

72” from face of heater to combustible surface

UPC#

686334

884501 RPH-208-A 1600 5,461 208 1 7.7 632-1620 5 884518 RPH-240-A 1600 5,461 240 1 6.7 632-1624 5

MODEL WAT TS BTU’S VOLTS PHASE AMPS

REPLACEMENT

QUARTZ LAMP

RPH-208 8’-12’

RPH-240 8’-12’

WT.

LIST

(LBS.)

344 880992 RPHWG 34

Optional Wireguard

UPC#

686334

MODEL LIST

MM Series “Mitey Midget” Electric Infrared Heater

• Instant, high-intensity radiant heat, with 60° symmetric heat pattern.

• MM heaters excel as people-heaters in areas requiring a linear, compact & concentrated heat source.

• Listed for indoor industrial and commercial comfort heat applications.

• Heavy duty Aluminum extrusion with a bright

Aluminum insert for maximum reectivity.

• Anodized Aluminum housing, (0.62” thick).

• Heat Element Sold Separately.

Manufactured in U.S.A.

UPC

686334

444019 MM-13A 500 1707 120 1 13" 3 234 443906 MMWG-13 24

442763 MM-18A 750 / 1000 3413 208-240 1 18" 4 244 443913 MMWG-18 36

449540 MM-24A 900 / 1600 5461 208-277 1 24" 5 254 441896 MMWG-24 46

442725 MM-33A 2500 8533 480 1 33" 6 273 443920 MMWG-33 50

442039 MM-46A 3000 / 3800 12457 480-600 1 46" 7 299 442046 MMWG-46 60

All MM-13A through MM-46A models are ETL Listed for use with Quartz Lamps Only!

MODEL

• Dimensions: 3.750” Wide x 3.380” High.

MAX

WATTS

MAX

BTU'S

VOLTS PH

24” from face of heater to combustible surface

UNIT

LENGTH

Mounting Clearances

24” from ceiling & from vertical surface

36” from another heater

WT.

(LBS.)

LIST

Optional Wireguards

UPC

686334

MODEL LIST

FFH Series Electric Utility Infrared Heater

• Both FFH Series Heaters are excellent for Farrowing & Finishing applications.

• Both units feature an 8 ft. 18/3 grounded cordset to plug into any 120V service.

• Gold anodized Aluminum reectors, with a 90° symmetrical reector pattern.

• Compact housing design, with the following housing nish:

FFH-512A: Gold Anodized Finish

FFH-512A

FFH-912B

Manufactured in U.S.A.

UPC#

686334

883894 FFH-512A 550 1877 120 1 5 671-3492 4 22 5 3 225

882781 FFH-912B 450/900 3072 120 1 8 671-3454 4 17 6 4 410

MODEL WAT TS BTU’S VOLTS PHASE AMPS

FFH-912B: Brown Enamel Finish

• Quartz Tubes Heat Element(s), Wire Guard & (2) 4’ ft. Jack Chains are included.

• FFH-912B Only: Offers (2) On/Off toggle switches to operate heating elements independently.

• Listed for indoor industrial and commercial comfort heat

REPLACEMENT

QUARTZ TUBE

WT.

(LBS.)

MOUNTING

HEIGHT

6’

7’

8’

Dimensions (in.)

Length Width Height

SIZING CHART - FFH SERIES Heater Model

FFH-512A 7 6 42 13.1 FFH-912B 6 7 42 21.4 FFH-512A 8 7 56 9.8 FFH-912B 7 8 56 16.1 FFH-512A 9 8 72 7.6 FFH-912B 8 9 72 12.5

LIST

LENGTH WIDTH

COVERAGE

Mounting Clearances

3” from ceiling

24” from vertical surface

72” from oor

(Sq. Ft.)

WATTS

/ Sq. Ft.

Page 73

Electric Infrared Heating Elements

Clear & Red Quartz Lamps

Notes: Life expectancy of all heating elements - 5,000 hours (4yr. Pro-rated Warranty). All heating elements operate at 50 / 60 Hertz.

UPC

686334

440059 630-05129 500 120 8-11/16 5 MM-13A 101 442770 630-10209 444118 630-10249 240 440165 630-16209 440172 630-16249 240 119 440998 631-16249 240 144 446235 630-38579 3800 600 440189 630-16279 277 119 481731 630-16489 480 481748 630-25209 481755 630-25249 240 481762 630-25279 277 190 440547 630-25489 480

Model Sufx: 630 = Horizontal Burning “Clear”; 631 = Vertical OR Horizontal Burning “Clear”; = Horizontal Burning “Red”

Item # Watts Volts

1000

1600

2500

• Color temperature emitted: approx. 4100° F (high brightness).

• Approximately 96% radiant efciency.

Length (in.)

Overall Heated

208

13-11/16 10 MM-18A

208

19-11/16 16

208

28-11/16 25

Fits

Model 686334

222, 223 or

MM-24A

342, 343 or

MM-33A

LIST

440363 631-25489 440684 631-25609 600

178 107 ---- ---- ---- ---119 ---- ---- ---- ---- 234

440677 630-36489 3650 480

444132 631-38579 3800 600

144

169

446150 632-1620 1600 208 19-11/16 16 222/223 446167 632-1624 1600 240 19-11/16 16 or RPH

150 446228 632-2548 2500 480 28-11/16 25 342 or 343 169

• 3/8” Diameter clear or red quartz envelope.

• Coiled tungsten lament; sealed porcelain end caps; halogen gas lled.

UPC

Item # Watts Volts

480

2500

RED QUARTZ LAMPS

• Excellent resistance to thermal shock.

Quartz Tubes

Notes: Life expectancy of all heating elements - 5,000 hours. All heating elements operate at 50 / 60 Hertz.

UPC

686334

443234 671-3784 1500 120 39-11/16 34-3/16 441810 671-5061 2000 208 39-11/16 34-3/16 441803 671-3785 2000 240 39-11/16 34-3/16 441933 671-5018 2000 277 39-11/16 34-3/16 441667 671-5060 3000 208 50-11/16 45-3/16 441476 671-3786 3000 240 50-11/16 45-3/16 441940 671-5059 3000 277 50-11/16 45-3/16 441957 671-5058 2250 480 50-11/16 45-3/16 440356 671-3454 450 120 12-15/16 8-7/16 FFH-912B 78 440080 671-3492* 550 120 19-1/2 16 FFH-512A 83 446242 671-5056 1000 120 18-5/16 14-7/16 CH-2212-1C 91 446259 671-5057 1425 240 27-5/16 23-7/16 CH-6424-1C 104

*3/8” Diameter

Item # Watts Volts

Length (in.)

Overall Heated

Fits

Model

OCH-46 124

OCH-57 138

LIST

• 5/8” Diameter frosted quartz envelope

• Nickel-Chromium alloy coiled

• Color temperature emitted: approx.

• Approximately 60% radiant efciency

• Fast heat-up/cool-down

• Moisture resistance: High

• Mechanical ruggedness: Good

Metal Sheath Elements

Length (in.)

Overall Heated

28-11/16 25

41-11/16 38

element with porcelain end caps and pigtailed termination

1800° F (bright orange glow)

Fits

Model

342, 343 or

MM-33A

462, 463 or

MM-46A

LIST

162

222

234

144

Notes: Life expectancy of all heating elements - 5,000 hours. All heating elements operate at 50 / 60 Hertz.

UPC# 686334 445870 641-37211 1800 120 445832 641-35661 445795 641-35611 240 CH-224-1A, CH-624-3A 445849 641-36051 277 CH-277-1A, CH-627-3A 445801 641-35621 480 CH-248-1A, CH-648-3A 445887 641-50011 600 CH-257-1A, CH-657-3A 445856 641-36061 445818 641-35631 240 CH-424-1A, CH-1324-3A, CH-2724-3B 445863 641-36071 277 CH-427-1A, CH-1327-3A 446174 641-35641 480 CH-448-1A, CH-1348-3A, CH-2748-3B 445894 641-50021 600 CH-457-1A, CH-1357-3A, CH-2757-3B

Note: Inner reector shipped with replacement Metal Sheath Elements.

MODEL WATT S VOLTS

2000

4500

UPC# 686334 445788 641-70321 1800 120 445702 641-70241 445719 641-70251 240 CH-224-1C, CH624-3C 445726 641-70261 277 CH-227-1C, CH-627-3C 445733 641-70271 480 CH-248-1C, CH-648-3C 445771 641-70281 600 CH-257-1C, CH-657-3C 445597 641-70001 445603 641-70011 240 CH-424-1C, CH-1320-3B, CH-2720-3C 445610 641-70021 277 CH-427-1C, CH-1327-3B 445627 641-70031 480 CH-448-1C, CH-1348-3B, CH-2748-3C 445665 641-70041 600 CH-457-1C, CH-1357-3B, CH-2757-3C

MODEL WATTS VOLTS

2000

4500

LENGTH (in) Replacement Heating Element

Overall Heated Fits “CH-Models” Fits “FHK Models”

208 CH-220-1A, CH-620-3A

23-1/16 18

208

44-7/16 39

Overall Heated Fits “CH-Models” Only

208 CH-220-1C, CH-620-3C

24-1/16 18

208

45-7/16 39

CH-420-1A, CH-1320-3A, CH-2720-3B

LENGTH (in) Replacement Heating Element

CH-212-1A FHK-212-1CA

FHK 2.0 & 6.0 KW

FHK 4.5 & 13.5 KW

CH-212-1C

CH-420-1C, CH-1320-3B, CH-2720-3C

Models

LIST

144

189

• 0.430” Diameter

LIST

Incoloy metal sheath envelope

• Nickel-

144

Chromium alloy coiled element imbedded in Magnesium Oxide insulating

189

powder

• Color temperature emitted: approx. 1600° F (dull orange glow)

• Approximately 50% radiant

efciency

• Slowest heat-up/ cool-down

• Moisture resistance: Lowest

• Mechanical ruggedness: Highest

Page 74

Electric Infrared Heating Controls

Variable Controllers

30-Amp or 80-Amp Enclosed

VHC-32

Manufactured in U.S.A.

• Solid State phase angle variable “Triac” knob controller adjusts heat settings from 10-100% with heat loads up to 15.4-Amps.

• 208/240 VAC single-phase, single stage controller, 3200 Watt max.

• Positive “Off” & built-in On/Off Rocker switch lights “red” during operation.

• NEMA 1 Aluminum enclosure with stainless steel face plate designed for wall mounting or suitable for semi-recessed applications.

• Must be mounted in a protected area.

• Can either operate Quartz Lamps or Quartz Tube Infrared Heaters.

UPC

686334

Model Description

485357 VHC-32 Variable Heat Controller 208/240-Volt; 15.4 Amp 3 5 5 3 lbs. 422 445948 VHC-15 Variable Heat Controller; 208/240-Volt; 15 Amp 3 5 5 3 lbs. 162 445634 18D-2-30CF (Open) SCR Controller - 26 Amp MAX; No Enclosure 6 6 9 11 lbs. 942 445641 18D-2-30CF (Enclosed) SCR Controller - 26 Amp MAX; Enclosure Included 8 10 12 15 lbs. 1398 445658 18D-2-80CF (Enclosed) SCR Controller - 80 Amp MAX; Enclosure Included 8 12 14 29 lbs. 2278

Manufactured in U.S.A.

• Solid state variable device controls heat loads up to 15-Amps.

• 208/240Volt “In-Line” Controller.

• Built in On/Off knob switch with positive “off” & surface plate included.

• Designed for a 2” x 4” electrical wall box mounting (not supplied).

• Must be mounted in a protected area.

• Can only operate Fostoria Quartz Tube Infrared Heaters.

VHC-15

18D-2-80CF ENC.

Manufactured in U.S.A.

• SCR Voltage Controller - 80 Amp MAX.

• Includes (1) 24-volt Potentiometer (3” square) to control the heat output.

• Only operates Quartz Lamps at 240 or 208-Volts, single phase only.

• Potentiometer can be mounted outside, but the SCR must be located in a protected area.

• Factory wired with millisecond fuses included.

Dimension (In.)

Depth Width Height

Wt. LIST

Snow & Ice Detectors

• Main control unit for Automatic Snow & Ice Control Systems.

• By sensing both temperature and moisture the system activates and melts any snow & ice accumulations until conditions subside.

• NEMA 3R Enclosure is UL Listed and houses timers and switching electronics to operate the system.

CIT-1

• Capability to monitor up to 6 sensors (CIT-1).

• Unit can be manually activated and can be controlled and monitored from an

APS-3C

Manufactured in U.S.A.

• Positioned above ground to maximize the sensors capability.

• Detects falling or blowing of precipitation such as snow when the

optional remote switch (Model RCU-).

temperature is below 38° F.

• Most common sensor device.

UPC#

686334

319614 APS-3C Snow / Ice Control Switch 6.56 11.5 9.25 8 lbs. 2533

319761 CIT-1 General Purpose Snow Sensor 3.25 3.25 4.13 1 lb. 9 11

Model Description

Depth Width Height

Dimension (In.)

Wt. LIST

Note: Any snow & ice control system should be used with the correct sized control panel (with contactors & fusing) as supplied by factory or your electrical contractor. Also, the APS-3C requires a control device (RCU-1, CIT-1, SIT-6E) in order to operate properly.

Contactor Enclosures

• Economical load handling / switch device, ideal for use with other control equipment.

• NEMA 1 Enclosures.

• Load rating up to 600V Max., 3-Pole.

• Magnetic contactor.

Cabinet Size (In.)

Depth Width Height

5 6 10 5

Wt.

(LBS.)

LIST

194

260

FEC-30-120

Manufactured in U.S.A.

UPC

686334

440851 FEC-30-120 440868 FEC-30-240 208/240 440875 FEC-60-120 440882 FEC-60-240 208/240

Model

Contactor

Amps

Coil

Voltage

120

Note: Installer to provide overload protection for all infrared heaters.

Page 75

Electric Infrared Heating Controls

Pre-Wired Contactor Panels

• Factory pre-wired for quick installation, with the following optional equipment: Snow & Ice Detector (APS-3C) Single & Two-Stage Thermostats Two-stage thermostats require a minimum 2-contactors.

Note: Contact factory for 3R, 4, 4X, & NEMA 12 “special” built models.

IMPORTANT FUSING INFORMATION

Fuses are NOT included since panels can be used with various infrared heat sources. Quartz

FPC2120

Manufactured in U.S.A.

120-V CONTROL SYSTEM 24-V CONTROL SYSTEM

UPC#

686334

MODEL

UPC#

686334

Lamp Heat Sources: Use FRS-600V (or equal) “Time Delay” fuses; Class RK-5. Quartz Tube & metal Sheath Heat Sources: Use KTS-R 600V (or equal) “Fast Acting” fuses; Class RK-1. Fuse circuits as close to calculated load as possible. Circuits less than 35 Amps will require the use of fuse reducers.

MODEL DEPTH WIDTH HEIGHT

Standard Models

MAX

AMPS

VOLTS

• Step-down transformer and secondary fusing for 24V or 120V control circuit.

• 3-Phase load rated.

• Fuses are NOT included.

• NEMA 1 Enclosures.

• Max 50-Amp branch circuit fusing.

CABINET SIZE (IN.)

WT.

(LBS.)

LIST

4459902 FPC8110 4864302 FPC8210

4460002 FPC2110 4864402 FPC2210 240

4460102 FPC7110 4864502 FPC7210 277/480 1891

4460202 FPC4110 4864602 FPC4210 480 1752

4460302 FPC8120 4864702 FPC8220

4460402 FPC2120 4864802 FPC2220 240

100

4460502 FPC7120 4864902 FPC7220 277/480 2336

4460602 FPC4120 4865002 FPC4220 480 2142

4460702 FPC8140 4865102 FPC8240

4460802 FPC2140 4865202 FPC2240 240

200

4460902 FPC7140 4865302 FPC7240 277/480 3337

4461002 FPC4140 4865402 FPC4240 480 3143

208

1752

6.75 16 24 52

208

2142

6.75 16 24 70

208

3143

6.75 24 30 88

4461102 FPC8160 4865502 FPC8260

4461202 FPC2160 4865602 FPC2260 240

300

4461302 FPC7160 4865702 FPC7260 277/480 4061

4461402 FPC4160 4865802 FPC4260 480 3865

208

3865

6.75 30 36 106

Page 76

FHK Series Portable Metal Sheath Electric Infrared Heater

• Double side wall housings to reduce operating temperatures.

• 6.0 and 13.5KW heaters have double top bafes to reduce

operating temperatures.

• 60° symmetrical heat pattern.

• Factory installed U-shaped metal sheath infrared heating elements have an average 5000 hour life.

• Heavy duty protective wire screens.

• GOLD anodized Aluminum internal reector.

• Ground fault protection must be used.

Square Feet Heated

2.0KW & 4.5KW Stand Models

Manufactured in U.S.A.

6.0KW & 13.5KW Hand Cart Models

NON-PROTECTED

1.8 / 2.0 25 36 40 50 2 feet

4.5 64 75 90 125 3 feet

6 85 100 120 150 4 feet

13.5 192 225 270 375 7 feet

AREA

BELOW ABOVE BELOW ABOVE

35 oF 35 oF 35 oF 35 oF

SEMI-PROTECTED

AREA

Required

Clearance

From Front

of Heater

Standard FHK Models

UPC#

686334

881739 FHK-224-1A

881753 FHK-248-1A 480 1 4.2 880435 SO 16/3

881784 FHK-424-1A

881807 FHK-448-1A 480 1 9.4 880466 SO 14/3 103

882910 FHK-624-3A

882934 FHK-648-3A 480

MODEL KW BTU's VOLTS PH AMPS W T. LIST

2.0 6,826

4.5 15,359

6.0 20,478

240 1 8.3

17 lbs. 502

240 1 18.8

24 lbs. 561

3 14.4

240

1 25.0 880442 SO 10/3 142

37 lbs. 966

3 7.5 880497 SO 14/4 130

1 13 880466 SO 14/3 103

OPTIONAL 25' POWER CORD

UPC#

686334

880435 SO 16/3

880459 SO 12/3 130

880497 SO 14/4 130

MODEL LIST

882965 FHK-1324-3A

13.5 46,076

882989 FHK-1348-3A 480

Contact Factory for Special Build Models @ 208V, 277V or 600V.

240 3 33.0

3 17.0 316422 SO 12/4 141

1 29.0 880527 SO 8/3 239

880510 SO 8/4 269

65 lbs. 1601

Factory Pre-Wired FHK Models With 15 Ft. Cord & Grounded Plug

UPC#

686334

881715 FHK-212-1CA STAND 1.8 6,143 120 1 15.0 18 lbs. 482

MODEL TYPE KW BTU's VOLTS PHASE AMPS W T. LIST

FHK Infrared Control Options

UPC

MODEL # DESCRIPTION

686334

485814 TO-SK-1 Tip-Over Switch 208V - 600V 10.3 10.3 5.0 12 397

589376 DC-SK-1 Disconnect Switch 120V - 600V 5.0 6.0 4.0 5 360

486026 GF-SK-1 Ground Fault Sensing Switch 208V - 600V 10.3 10.3 5.0 12 737

Note: All SK-1 Models have NEMA-1 Enclosure, 50-Amp Max. & 1/3-Phase Rated.

Operating

Voltage (VAC)

Dimensions (In)

Ht. Wd. Dp.

WT.

(lbs.)

Model “TO” & “GF” features

LIST

include a positive “off” & a built-in on/off rocker switch that glows red during operation. Additionally, enclosure can mount directly to the terminal box on the back of the heater (FHK-6/13 only) or be mounted to a remote wall surface.

TO-SK-1

or GF-SK-1

Page 77

Chain mounted

CH 2212-1C

Portable Cart Unit CH 6424-1C

with FHK-1 Cart

CH Series Portable Quarts Infrared Heater

MODEL CH 2212-1C has two 1000 Watt elements that can be switched on / off by toggle switches to produce 1000 Watts or 2000 Watts of heat. - 15’ cord and NEMA 5-20 molded plug.

MODEL CH 6424-1C has two sets of 1425 Watt elements that can be switched on / off by toggle switches to produce 2850 Watts or 5700 Watts of heat. - 15’ cord and NEMA L6-30 twist lock plug.

• 60° symmetrical heat pattern. • Quartz tubes and built in wire guards included.

• Interior or protected outdoor use only. • GOLD anodized Aluminum reector and end caps.

UPC 686334 MODEL KW BTU's VOLTS PHASE AMPS WT. LIST

884099 CH-2212-1C 2.0 / 1.0 6826 / 3413 120 1 16.7 / 8.35 16 lbs. 547 884105 CH-6424-1C 5.7 / 2.85 19454 / 9727 240 1 23.8 / 11.9 31 lbs. 901 852401 FHK-1 OPTIONAL CART 20 lbs. 129

20 AMP Plug NEMA #5-20

Note: CH-2212-1C operates with a 20- Amp molded plug.

30 AMP Plug NEMA #6-30P

Note: CH-6424-1C operates with a 30- Amp twist lock plug.

Manufactured in U.S.A.

Listed

for

overhead

operation

PCH Series Portable Quartz Infrared Spot Heater

Features

• Suitable for portable spot heat or for curing

Width: 53” Height: 2-6’ Depth: 28”

• Average element life is 5000 hours

• Bright Aluminum reector and end caps

• 20 gauge powder coated Steel housing

• 15’ long, 3 wire (14/3) cordset with standard 3 pring NEMA 5-20P

UPC#

686334

884112 PCH-48C 1500 5120 120 1 30 504

MODEL WAT TS BTU’s VOLTS PHASE WT. LIST

clear coat paint

• Height adjustable from 2’ to 4’

• On-Off rocker switch standard

• 4 casters included; Tip-Over power cutoff safety switch

• 60o symmetrical heat pattern

• 5/8” diameter quartz tube included

Portable Infrared Instant On-Off Heat Gun

Features

• Provides instant spot heat in a controlled pattern

• Spot cure retouched paint and other

nishes

• De-wrinkle or relax materials such as cloth-vinyl-leather

• T-3 Tungsten IR lamp

• Spring loaded power button switch

• 10’ long, 18/3 grd. cordset with NEMA plug

UPC#

686334

592284 RHG-1012A

592277 RHG-1012B 1500

MODEL WATTS VOLTS AMPS WT. LIST

1000 120 8.4 3

Portable Electric Infrared Heat Panels

Features

• Portable panels are built to withstand rigors of industrial and heavy-commercial applications, such as auto collision repair shops.

• 20 gauge Steel frame, base, and housing construction.

• 3” Steel casters for high stability and ease of mobility

• Gold anodized Aluminum reectors and end caps allow 10% faster cure time than polished Aluminum reectors, especially in paint and dust-laden atmospheres.

• Elements achieve full temperature in less than 2 minutes

• Fused disconnect switches are installed on the back of each unit.

• Units are positioned with adjustable hinges allowing the user to use direct heat more precisely to the target area.

• Gentle but effective medium-wave radiant heat can quickly boost, ash-off, or cure a variety of nishes, and lessens the chance of blistering and/or overheating the coating.

• Medium-wave infrared heating elements are also effective for ash-off of water-based clear

coatings being mandated by environmental agencies in many states.

General Curing Guidelines

Material Type

Curing Time 3-5 mins 3-6 mins 8-20 mins 3-10 mins 12-30 mins 10-30 mins

Note: Curing times will vary depending on material and shop conditions. This chart is based on distances of 18-24” away from the target area.

Solvent Based

Primer

Water Based

Primer

Two Component

Primer

Water Based

Clear Coat

Standard Models

HP-5-QT

Acrylic enamel &

Polyurethane Clear Coat

HP-11-QT

Urethane Clear Coat &

High Solids Top Coat

2063

UPC#

686334

884129 HP-5-QT 4,800 884136 HP-6-QT 6,400 26.7 4 884143 HP-11-QT 11,200 46.7 7 6-3 SO 89-1/2 77 225 5800

Model WATTS VOLTS AMPS

20 4

240

HEAT

SOURCES

CABLE

TYPE (20’)

12-3 SO

Dimension (In.) Heated Area (In.) Width Height Width Height

44-5/8

66-5/8 61

56-1/2

Wt. LIST

116 2725

141 3150

Page 78

FES & YES Series Heat WaveTM Portable Electric & Wall or Ceiling Mounted Salamander

FES Series Product Features & Information

BUILDING SIZE: 1000 SQ. FEET 1500 SQ. FEET 2000 SQ. FEET

HEATER: 20 oF 40 oF 20 oF 40 oF 20 oF 40 oF

• Safety yellow heater enclosure with safety screens on both air intake and output openings.

• Optional 25’ long SO type cord, ready for plug attachment is available for each model.

• Long-life nned tubular heating elements.

• Thermostat adjustment 40° to 100° F.

• Magnetic contactor.

• Automatic reset.

• High-limit thermal cutout switch.

Manufactured in U.S.A.

• Fan only switch.

• 10” wheels.

• 800 CFM-15KW units - 1100 CFM-30KW units.

Standard FES Models

UPC#

686334

886017 FES-1520-3A 15 51195 208 3 42 45oF 65 lbs. 886079 FES-1524-1A 15 51195 240 1 63 45oF 69 lbs. 886024 FES-1524-3E 15 51195 240 3 36 45oF 65 lbs. 886031 FES-1548-3E 15 51195 480 3 18 45oF 65 lbs. 886048 FES-1560-3A 15 51195 600 3 15 45oF 65 lbs. 886055 FES-3048-3A 30 102390 480 3 36 90oF 83 lbs. 2537 886062 FES-3060-3A 30 102390 600 3 29 45oF 65 lbs. 2665

10 KW, 240V, 1Phase factory pre-wired model with 10 ft. cable & straight blade range plug.

MODEL KW BTU's VOLTS PH AMPS TEMP RISE W T. LIST

UPC

686334

MODEL KW BTU's VOLTS PHASE AMPS TEMP RISE WT. LIST

AVERAGE MINUTES TO ACHIEVE TEMPERATURE RISE*

TEMP RISE TEMP RISE TEMP RISE

10 KW 70 min 140 min 105 min 210 min --- --- 15 KW 47 min 94 min 71 min 142 min 94 min 188 min 30 KW

45 KW

* Based on a 15' ceiling height - lower ceiling height will reduce time required

23 min 46 min 35 min 70 min 47 min 94 min 10 min 30 min 20 min 35 min 35 min 40 min

THE ELECTRIC

ALTERNATIVE TO

PROPANE AND

KEROSENE SPACE

HEATERS

OPTIONAL 25' POWER CORD*

UPC 686334 MODEL LIST

316408 SO 6/4 295

1609

880530 SO 4/3 256 316408 SO 6/4 295 316422 SO 12/4 149 316408 SO 6/4 295 316422 SO 12/4 149

*Plug not included.

874434 FES-0924-1C 9 30717 240 1 38 25oF 55 lbs. 1532

886000 FES-1024-1CA 10 34130 240 1 42 30oF 60 lbs. 1532

45 Kilowatt FES Model

OPTIONAL 25’ POWER CORD

UPC 686334 MODEL LIST

316439 SO 4/4 300

316408 SO 6/4 295

UPC

686334

872225 FES-4548-3 45 153585 480 3 54.2 70°F 125 lbs. 4196

487405 FES-4560-3 45 153585 600 3 44 70oF 125 lbs. 4410

MODEL KW BTU’s VOLTS PH AMPS

• Safety yellow heater enclosure with safety screens on both air intake and output openings.

• Optional 25’ long SO type cord, ready for plug attachment is available for each model.

• Long-life nned tubular heating elements.

• Thermostat adjustment 40° to 100° F.

• Two 10” rear wheels and a front locking caster.

TEMP

RISE

WT. LIST

• High-limit thermal cutout switch with manual reset.

• 2200 CFM

• Fan only operation feature

Standard YES Models

• Wall / ceiling mount included with unit

• Unit is ready for direct wiring

UPC

686334

886086 YES-1520-3A 15 51195 208 3 42 45oF 60 lbs.

886185 YES-1524-1A 15 51195 240 1 63 45oF 60 lbs.

886093 YES-1524-3E 15 51195 240 3 36 45oF 60 lbs.

886109 YES-1548-3E 15 51195 480 3 18 45oF 60 lbs.

886123 YES-3048-3A 30 102390 480 3 36 90oF 72 lbs. 2416

MODEL KW BTU's VOLTS PHASE AMPS TEMP RISE W T. LIST

• Thermostat adjustment 40° to 100° F.

Manufactured in U.S.A.

1532

Wall Mounted

Ceiling Mounted

Page 79

198 Series 120 Volt Radiant and/or Fan Forced Portable Heater

• 3-Heat settings:

- 600 Watt radiant

- 900 Watt fan forced

- 1500 Watt radiant & fan forced

• Temperature control thermostat

• Dual safety system:

- Tip over switch

- Manual reset type limit control

• 6’ long - 3 conductor cord

• 1 year limited warranty

Width: 11”

Height: 15”

Depth: 12”

Standard Models

UPC

686334

445092 198 TMC 1500 / 900 / 600 5120 120 12.5 / 7.5 / 5 1 9 lbs. 148

MODEL WATTS

MAX

VOLTS AMPS PHASE W T. LIST

BTU's

178 Series 120 Volt Ceramic Fan Forced Portable Heater

• Two heat settings: 1500W / 950W plus fan only setting (20W)

• Temperature control thermostat

• 6’ long - 3 conductor cord

UPC

686334

445931 178 TMC 1500 / 950 5120 120 12.5 / 7.1 1 8 lbs. 132

Note: Photograph is a representation of stocked models. Actual model may vary in appearance.

MODEL WATTS MAX BTU's VOLTS AMPS PHASE W T. LIST

• Double safety system:

- Automatic reset type limit control

- Thermal cut-off device

Standard Models

Width: 11-1/4”

Height: 10”

Depth: 7”

188 Series 120 Volt “Milk-house” Style Fan Forced Portable Heater

• 1300W & 1500W heat settings plus fan only setting

• Temperature control thermostat

• 6’ long - 3 conductor cord

• Triple safety system:

- Tip over switch

- Automatic reset type limit control

- Thermal cut-off device

Standard Models

UPC

686334

800419 188 TASA 1500 / 1300 5120 120 12.5 / 10.8 1 9 lbs. 88

MODEL WATTS

MAX

BTU's

VOLTS AMPS PHASE W T. LIST

“Under-The-Desk” Conned Space Radiant Heat Panel

• Use under desks for personal comfort or in small areas for freeze protection or moisture removal.

• Built in stand.

• Temperature control thermostat.

Standard Models

Manufactured in U.S.A.

UPC#

686334

450881 170-TS 170 580 120 1 9 lbs. 157

MODEL WATTS BTU’s VOLTS PHASE WT. LIST

483 Series 120 Volt Portable Baseboard Convection Heater

Width: 10” Height: 16”

Depth: 9-1/2”

• 6' long - 3 conductor cord

Width: 22-3/4”

Height: 8”

Depth: 1-3/4”

• 1500 Watt convection heater

• Temperature control thermostat

• Manual reset type limit control

• Power on indicator light

Width: 48”

Height: 5-1/4”

Depth: 7-1/2”

• 6’ long - 3 conductor cord

Standard Models

UPC

686334

870887 483 TM 1500 5120 120 12.5 1 13 lbs. 156

MODEL WATTS

MAX

BTU’s

VOLTS AMPS PHASE WT. LIST

Manufactured in U.S.A.

Page 80

30 AMP Plug NEMA #6-30P

474 Series 240 Volt Dual Heat Fan Forced Portable Heater

• 2000W & 4000W heat settings

• Temperature control thermostat

• Manual reset type limit control

• 6’ long - 3 conductor cord

UPC#

686334

446181 H474 TMC 2000 / 4000 13652 240 8.3 / 16.6 1 20 lbs. 229

MODEL WATTS

MAX

VOLTS AMPS PHASE WT. LIST

BTU's

Width: 16”

Height: 16”

Depth: 8-1/2”

20 AMP Plug NEMA #6-20P

5800 Series Garage/Workshop 240/208 Volt Fan Forced Portable Heater

• Up to 4800 Watts of heating comfort for garage or utility room applications

• 4000 Watts available for smaller areas.

• Built in bi-metal double pole

thermostat - 50° to 90° range.

• Steel tubular heating element

• Wall/Ceiling bracket included

• Manual reset standard

• Power on and overheat pilot lights

UPC#

686334

503402 HF5840TC 4000/3000 13652

503396 HF5848TC 4800/3600 15086 20 / 17.3 30 Amp 300

MODEL WATTS

MAX

BTU's

VOLTS AMPS PHASE

240 / 208

ITEM WIDTH HEIGHT DEPTH

Heater 10.625 11” 9.625”

Bracket 2.5” 10” 14.0”

16.6 / 14.4

PLUG TYPE

20 Amp

WT.

(LBS)

LIST

225

ICH Series 240/208 Volt Construction Site/Utility Fan Forced Portable Heater

• Operates on 240V or 208V

• Steel tubular heating element

• 43°F air heat rise

• Internal overheat thermostat

• Temperature control thermostat

• 6’ long cordset

UPC#

686334

450874 ICH-240C 4000 / 3000 13648 240 / 208 16.7 / 14.4 1 15 lbs. 247

MODEL WATTS

MAX

BTU's

Width: 10 5/8”

Height: 12 3/4”

Depth: 10”

20 AMP Plug NEMA #6-20P

VOLTS AMPS PHASE W T. LIST

680 Series “Bulldog” 240/208 Volt Fan Forced Portable Unit Heater

Swivel base allows unit to be wall, oor, or

ceiling mounted.

• Operates on 240V or 208V

• Finned steel tubular heating element

20 AMP Plug NEMA #6-20P

HF684TC HF685TC,

• Internal manual reset thermal cut-out

• 6’ long cord with molded plug

• Temperature control thermostat with 35°F to 85°F range

Height: 17 1/2”

• 10’ air throw - 262 CFM

UPC#

686334

446280

446297 HF685TC 4800/3600 16384/12288 240/208 1 20.0/17.4 58oF 20 lbs. 395

446303 HF686TC 5600/4200 19107/14330 240/208 1 23.4/20.2 75 oF 20 lbs. 443

683500 A1560

* HF684TC UL listed only

MODEL WATTS

*HF684TC

4000/3000 13652/10239 240/208 1 16.7/14.5 48 oF 20 lbs 377

OPTIONAL WALL CEILING BRACKET FOR HF680 & ICH 240c

MAX

BTU's

VOLTS PHASE AMPS

SERIES HEATERS

TEMP

30 AMP Plug NEMA #6-30P

HF686TC

Width: 13 1/2”

Depth: 11 1/2”

RISE

WT. LIST

Page 81

Manufactured in U.S.A.

Specialty Heaters

RPH Series Pump House Convection Specialty Heater

• Provides protection against freezing for pump houses, utility rooms, relay stations, construction sheds, etc.

• Aluminum nned heating element

• Powder coated epoxy steel case

• Automatic temperature control thermostat with a 35oF to 65oF range.

• Dimension 20” x 5-1/2” x 4”

Standard Models

UPC#

686334

999083 RPH1-5A 500 1706 120 4.2 5 lbs.

999090 RPH2-5A 500 1706 240 2.1 5 lbs.

984263 RPH22-5Ai 984270 RPH2-5Ai 240 2.1

MODEL WAT TS BTU’s VOLTS AMPS W T. LIST

International Models

500 1706

220 2.3

5 200

FH Series In-Floor Fan Forced Specialty Heater

• Powder coated 20 gauge steel case

• 14 gauge grill

• Steel spiral nned heating element

• Auto reset thermal cut out with audible alarm.

• Floor opening: 14-1/8” x 7-1/4” x 7-3/8”

Manufactured in U.S.A.

• Grill dimensions: 15-13/16” x 8-13/16”

Standard Models

UPC#

686334

378239 FH15

378277 FH1T Single Pole Integral Thermostat Kit 1lb 148

MODEL WAT TS BTU’s VOLTS AMPS WT. LIST

750 2560 120 6.25

1500 5120 120 12.5

1500/1125 5120 / 3840 240/208 6.25/5.41

OPTIONAL FIELD INSTALLED THERMOSTATS

15 lbs 572

200

TSH Series Fan Forced Kickspace Specialty Heater

• Fits into softs, stair risers or under utility cabinets

• Finned steel heating element.

• Manual reset thermal cut-out

• Recessed opening: 22-3/8” x 3-5/8” x 11-1/2”

Manufactured in U.S.A.

• Grill dimensions: 23-7/8 x 3-5/16

Standard Models

UPC#

686334

381802 TSH20J

970174 TSH20JW Above Model with White Grill

378376 TSH1TX Single Pole Integral Thermostat Kit 1lb

378383 TSH2TX Double Pole Integral Thermostat Kit 1lb

MODEL WATTS BTU’s VOLTS AMPS W T. LIST

1500 / 1000 5120 / 3412 120 12.5 / 8.4

1500 / 750 5120 / 2560 208 7.2 / 3.6

2000 / 1000 6284 / 3412 240 8.4 / 4.2

OPTIONAL FIELD INSTALLED THERMOSTATS

16 lbs 342

Page 82

CF & CFH Series Variable Speed Air Curtains

Product Specications

CABINET: Shall be constructed of 20 gauge rigid steel with baked on epoxy powder coat paint for durability. DISCHARGE VANES: Shall extend the entire width of the unit and be adjustable for optimum perfor-

mance of air ow.

BLOWERS: Shall be forward curved centrifugal type, DWDI with corrosion resistance scroll and wheel.

MOTORS: Shall be heavy duty, PSC, direct drive high efciency and designed for use with

SCR controllers. Motors shall be permanently lubricated for long life and have thermal over load protection. Motor shall have double insulation protection for quieter operation. Quick disconnects shall be supplied to accommodate easy installation and service of motor. SCR SPEED CONTROLLER: Supplied on all units compatible with the motor with low end adjustment for air volume control and savings in power consumption. ELECTRIC HEAT (OPTIONAL): Electric heater available as eld installed option. Electric heater shall be steel sheath element with helical wound

steel ns for maximum heat

transfer and safety.

Air Curtain with Heater

Module

NOTE: All heating sections are constructed of totally enclosed n tubular elements for safety and longer operating life. With heating section installed, unit becomes a 24 Volt control unit and can utilize a low voltage thermostat for control of heating.

NOTE: For 72” through 120” units, order multiple heater modules corresponding to the actual air curtain models

686334

671200 36 CF36 3288/455 2672/333 671217 48 CF48 4168/786 4515/766 1606/583 4.4/3.6 519/189 82 1709 671224 60 CF60 4168/764 6544/931 1636/562 4.4/3.8 509/199 90 1843

671231 36 CFHD36 3288/1120 2672/819 671248 48 CFHD48 4256/929 4611/906 1662/500 5.9/4.8 586/168 85 1792 671255 60 CFHD60 4256/924 5763/1126 1652/509 5.2/4.4 708/172 93 1930

Model # Unit Width KW Volts Phase

CFHTR 36 10.0 208 3

MODEL

SIZE

UPC

(in)

72 2 EA: CF36 3288/455 5344/666 1659/620 7.8/6.8 944/308 148 3062 96 2 EA: CF48 4168/786 9030/1532 1606/583 8.8/7.2 1038/378 164 3318

108 3 EA: CF36 3288/455 8016/999 1659/620 11.7/10.2 1416/462 222 4594

120

72 2 EA: CFHD36 3288/1120 5344/1638 1689/603 8.8/8.6 1206/384 154 3222 96 2 EA: CFHD48 4256/929 9222/1812 1662/500 11.8/9.6 1172/336 170 3480

108 3 EA: CFHD36 3288/1120 8016/2457 1689/603 13.2/12.9 1809/576 231 4833

120

MODEL

STANDARD UNITS: 1/2 HP MODELS - UP TO 10’ HIGH DOORWAYS - WITHOUT HEAT SECTION

1 EA: CF48 4168/786

2 EA:CF36 2672/333 1659/620

HEAVY DUTY UNITS: 3/4 HP MODELS - UP TO 12’ HIGH DOORWAYS - WITHOUT HEAT SECTION

1 EA: CFHD48 4256/929 2 EA: CFHD36 3288/1120 1689/603

EXAMPLE

| | | | |

HEATER

WIDTH

CFHTR

KW VOLTS

208 240 7.2 9.0 15 14 480 3.6 4.5 15 14

277 208 14.4 18.0 20 12 240 12.5 15.6 20 12 208 240 12.0 15.0 20 12 480 6.0 7.5 15 14

277 208 24.0 30.0 35 8 240 20.8 26.6 30 10 208 240 18.0 22.5 25 10 480 9.0 11.3 15 14

7.5 277

208 36.0 45.0 50 6 240 31.2 39.0 45 8 208 240 24.0 30.1 35 8

480 12.0 15.0 20 12

36, 48, or 60 Inch Width

NOTE: 12KW MAXIMUM ON 36” WIDTH UNITS

277 240 41.6 52.0 60 6 208 240 28.8 36.0 40 8

480 14.4 18.0 20 12 277 1 43.3 54.1 60 6 208 240 36.0 36.0 55 6

480 18.0 18.0 30 10

FT. / MIN.

HI - LOW

PHASE

NOZZLE

CFM

9859/1432

9955/2544

VOLTS

120

Use the example shown (left) to order unit with heat section

HEATER

AMPS

8.3 10.4 15

10.8 13.5 15 14

13.8 17.25 20

18.0 22.5 25 10

20.8 26.0 30

27.0 33.8 40 8

27.7 34.4 40

36.1 45.1 50 6

33.3 41.6 45

41.6 52.0 60

MINIMUM CIRCUIT

RPM

HI - LOW

1659/620 3.9/3.4 472/154 74 1576

1606/583

1689/603 4.4/4.3 603/192 77 1659

1662/500

by specication

AMPS

HI - LOW

12.2/10.4 1982/497 230 4721

14.7/13.4 2981/552 239 4961

MAXIMUM

FUSE AMPS

WATTS

HI - LOW

BTUH

10,239

17,075

25,597

34,130

40,956

51,195

75°C WIRE

AWG

Manufactured in U.S.A.

WT.

(lbs)

LIST

36” - 1205

48” - 1331

60” - 1377

SD Series - Setback on Demand Thermostat

FULLY AUTOMATIC: All the savings without any of the hassles of a programmable thermostat. Once installed, everything is automatic. When people are present it automatically controls to the comfort setting. When they leave, it automatically returns to the economy setting.

SMART COMFORT: The SD thermostat learns your schedule so you arrive to a comfortable temperature. Holidays are no problem. When no-one arrives, it automatically returns to the economy setting.

AUTO-CHANGEOVER: Our Auto-Changeover doesn’t limit your comfort settings. We incorporate an adjustable deadband to protect your equipment while maintaining comfort. Factory set at 1 degree, but adjustable from 1-5 degrees.

ONE MODEL WORKS WITH ALMOST ANY LOW VOLTAGE SYSTEM.: The SD thermostat works with low voltage systems up to 4 stages of heat, 4 stages of cool, or any combination up to a total of 4 stages including Heat Pumps.

Patent Pending

UPC#

686334

523646 SDHW1001 White Hardwire 375

MODEL COLOR TYPE LIST

Page 83

Features

• Single pole and double pole

• Heat only, cool only, & heat or cool

• DP models include positive off

• Celsius and Fahrenheit temperature scale

• Optional Thermometer

• 22 Amps, 277 Volts AC

EPET Series and HLT Series Hazardous Location

Thermostats & Controls

ET Series - Line Voltage

UPC #

686334 538725 AET5DWS Double Pole 22 Amp, 120-277V with leads, Anticipator 538732 AET5SWS Single Pole 22 Amp, 120-277V with leads, Anticipator 538886 ET5DS Double Pole 22 Amp, 120-277V, Heat Only 538749 ET5D4S Double Pole 22 Amp, 120-277V, 35-75oF Temp Range 538756 ET5DTS Double Pole 22 Amp, 120-277V, with Thermometer, Heat Only 538763 ET5DWS Double Pole 22 Amp, 120-277V, Heat Only with Leads 538770 ET5MS Heat Only, 2 Stage 538787 ET5SS Single Pole 22 Amp, 120-277V, Heat Only 538794 ET5S4S Single Pole 22 Amp, 120-277V, 35-75oF Temp Range 538800 ET5SRS Single Pole 22 Amp, Cooling Only 538893 ET5SRTS Single Pole Cool with Thermometer 538817 ET5STS Single Pole 22 Amp, Heat Only with Thermometer 538824 ET5SWS Single Pole 22 Amp, Heat Only with Leads 538831 ETD5MS Double Throw, 2 Stage Heat, 1 Stage Cool 538848 ETD5MTS 2 Heat, 1 Cool with Thermometer 538855 ETD5SS Single Pole Double Throw Heat/Cool 538862 ETD5STS Single Pole Double Throw Heat/Cool with Thermometer

Motor Rating (full load): 3/4 HP @ 125V, 1-1/2 HP @250V Pilot Duty Rating 125VA @ 24VAC NEMA Class Seven Div. 1 Approved Class I Group C & D, Class II Group E, F, & G Not rated for Group B

MODEL DESCRIPTION LIST

41.65

37.40

32.90

33.60

34.30

33.60

35.70

27.50

30.80

27.30

30.80

32.20

35.70

37.10

30.80

32.20

Features

• SPDT & DPDT Models

• Heat or cool compatible

• Celsius and Fahrenheit temperature scale

• Bi-Metal or capillary sensor

• Snap action switch

• Casting tapered top and bottom for 3/4” conduit

• 1/2” thick cast Aluminum housing

• Dimension 5-3/4” x 6-3/8” x 5.57”

UPC#

686334

538077 EPETD8D DPDT - Bi-Metal 22A @120-277VAC 50-90oF 453

538107 EPETD8S SPDT - Bi-Metal 22A @120-277VAC 50-90oF 429

528078 EPETP8D DPDT - Bi-Metal 22A @120-480VAC 50-90oF 467

528061 EPETP8S SPDT - Bi-Metal 22A @120-480VAC 50-90oF 442

523158 H LT-1 SPDT - Capillary 22A @120-277VAC 40-110oF 476

523165 H LT-2 DPDT - Capillary 22A @120-277VAC 40-110oF 502

HLT Series incorporates screwdriver temperature adjustment slot and all metal housing. External

MODEL DESCRIPTION LOAD RATINGS RANGE LIST

Master ctn: 4 pcs, 24 lbs (varies slightly by model), 16” x 14.5” x 6”

EPET Series incorporate plastic knob & Bi-Metal Sensor housing.

bulb and capillary sensor.

2000 Series - Line Voltage

UPC#

686334

502849 S2022H10AA White

502436 S2022H10AB Ivory

MODEL COLOR DESCRIPTION LIST

Single Pole with leads, 22 Amp 34

Features

• White or Ivory

• Single pole and double pole

• Heat Only

• DP models include positive off

• 22 Amps, 277 Volts AC

502856 D2022H10BA White

Double pole with leads, 22 Amp 45

502443 D2022H10BB Ivory

502917 S2025H10AA White Single Pole with leads, 25 Amp 51

502924 D2025H10BA White Double pole with leads, 25 Amp 60

Page 84

Thermostats & Controls

TW Series

Features

• Single and double pole models

• Wire leads

• Tamper resistant

Load Rating

• 22 Amps resistive @ 120 VAC

• 18 Amps resistive @ 277 VAC

UPC#

686334

502009 TW145 SP, Beige with Leads Tamper Resistant 59

502016 TW146 DP, Beige with Leads Tamper Resistant 69

MODEL DESCRIPTION TEMPERATURE SCALE LIST

Master Carton: 25 Pcs, 12 lbs. (varies slightly by model), 16” x 14” x 5.5”

Washdown Series

Features

• Single and double pole models

• Rain tight NEMA 4X rating

UPC#

686334

523424 TW155A SP, Rain tight 40-110oF 179

523431 TW255A DP, Rain tight 40-110oF 209

MODEL DESCRIPTION TEMPERATURE SCALE LIST

22 Amps @ 120/250/277 VAC, 5” x 5” x3” Case

• Stainless steel hardware

• Coil capillary temperature sensor

Industrial Series

Features

• Coil capillary (CKT) models

• Bi-Metal models (KT)

• Rugged steel case

• SPST & SDPT models

• Hard wired models rated for 22A resistive @125-250 VAC

• Corded models rated for 13A resistive @125VAC

UPC#

686334

534048 CKTD110 SPDT Heat or Cool 40 - 110oF Wire Leads F 110

534086 KT110 SPST Heat Only -10 - 100oF Wire Leads C & F 46

534109 KT121 SPST Heat Only -10 - 100oF 6’ Cord/Plug C & F 51

534178 KTD110 SPDT Heat or Cool -10 - 100oF Wire Leads C & F 47

534369 KTO110 SPST Cool Only -10 - 100oF Wire Leads C & F 47

534215 KTO121 SPST Cool Only -10 - 100oF 6’ Cord/Plug C & F 51

MODEL DESCRIPTION RANGE CONNECTIONS SCALE LIST

Master Carton: 13.75” x 14” x 9”, Qty 9-12, 14lbs.-16lbs. depending on model

L Series

Features

• 6’ or 8’ Capillary

• Rugged steel cage

• SPDT for Heat or Cool

UPC#

686334

534260 L06Y-01 SPDT Heat or Cool 0 - 90oF 6’ F 77

534277 L08Y-01 SPDT Heat or Cool 0 - 90oF 8’ F 90

MODEL DESCRIPTION RANGE CAPILLARY SCALE LIST

Master Carton: 13.75” x 14” x 9”, 12 Pcs, 18lbs.

• 25A resistive

• Rated differential of 6°F

Page 85

Thermostats & Controls

Electromechanical Humidistat

• 4.4 amp @ 120VAC

• 2.2 amp @ 240VAC

Standard Models

Features

• 50VA @ 24VAC - 240VAC

• 10% - 60% relative humidity range

T4398A 1021

Precision Mechanical

UPC#

686334

523370 H46D1214

MODEL DESCRIPTION LIST

Electromechanical De-Humidistat

• 4.4 amp @ 120VAC

• 2.2 amp @ 240VAC

Standard Models

UPC#

686334

589147 H1D1AA

MODEL DESCRIPTION LIST

Honeywell Line Voltage Thermostats

• Heat only thermostats

• Accurate temperature control

Standard Models

UPC#

686334

503303

MODEL VOLTAGE DIMENSIONS DESCRIPTION LIST

T4398A

1021

120-240 2.875”x4.375”x2.00D

Humidistat/Electromechanical

Features

• 50VA @ 24VAC - 240VAC

• 10% - 60% relative humidity range

Dehumidistat/Electromechanical

Features

• 22 Amp resistive for mechanical models

Precision Electric Heating. SPST,

50-80 OF,

22 Amp @ 120-240V 19 Amp @

277V

181

TL8230A 1003

Electronic Programmable

RFT-1 shown with

UT thermostat

RFR-5

• Heat only thermostats

• Accurate temperature control

UPC#

686334

503365

MODEL VOLTAGE DIMENSIONS DESCRIPTION LIST

TL8230A

1003

Wireless RF Interface Series

• Heat only, Cool only

• 4 wire Heat/Cool

• Standard 2 stage Heat/ 1 Stage Cool Heat Pumps

RFT-1

• Multistage heating and/or cooling equipment

UPC#

686334

523554 RFT-1

523561 RFR-5

523578 RFKit-5 RFT-1 & RFR-5 Package

MODEL DESCRIPTION VOLTAGE CONNECTIONS LIST

Features

• 16 Amp resistive for electronic models

• Energy Star compliant.

Standard Models

240/208 2.70”x4.90”x.90D

Features

RF Thermostat Transmitter

Dim: 4” x 5” x .875”

RF Relay Interface

Dim: 4.5” x 6” x 1.25”

Electronic Programmable Line

Voltage DPST, 15 Amp, 40-86 OF

179

• Works with most low voltage thermostats

• Temp Range: 50-130 F

• Max Operating Range: 50 Feet

2-AAA Batteries 6 Wires 100

24 VAC

2 AAA

24 VAC

R-C-R1

1-2-3-4-5

R-C-R1

1-2-3-4-5

100

200

Page 86

Thermostats & Controls

Low Voltage Programmable Thermostats

Features

• 7 Day, 4 Settings Per Day

• Pre-Programmed or Custom Settings

Standard Models

• Control Accuracy +/- 1oF of Setpoint Temp

• Backlit Display, Energy Star Compliant

TH115-A-024T

TH147-P

UPC#

686334

523400 TH115-A-024T

• 7 Day, 4 Settings Per Day

• Pre-Programmed or Custom Settings

MODEL DESCRIPTION LIST

Standard Models

UPC#

686334

523585 TH147-P

MODEL DESCRIPTION LIST

7 Day, 4 Settings per Day, Heating/Cooling, 1 Stage Heat/Cool

Temp Range Heat:41-82OF, Cool:59-95OF

2 Stage Low Voltage Thermostat

Heat Only

Temp Range:40-86OF

Dims:4.89”H x 2.79”W x .91”D

Features

• Control Accuracy +/- 1oF of Setpoint Temp

• Backlit Display, Energy Star Compliant

Dims: 5”W x 3”H x 1”D,

121

144

TW123

Features

• 24V single or 2 stage heat and cool

• Gas, oil, or electric with air conditioning.

• Heat only, Heat only with fan, Cool only.

• Battery only, common wire only or common wire with battery backup.

• System settings - Heat, Off, Cool, Auto, Emergency Heat.

• Temperature range - Heat 40-90oF, Cool 50-99oF.

• Dimensions: 3-9/16” H x 5-13/16” W x 1-1/2” D

Standard Models

UPC#

686334

691116 TW123 / TH5220D 750MV - 2DV

MODEL VOLTAGE

TEMP

RANGE

40-90 Heat 50-99 Cool

Round - Low Voltage

Features

• Heat only for 24V heating systems

• White color • Temperature range - 50o - 90oF

• Does not contain Mercury

• Dimensions 3-11/16” diameter

Standard Models

UPC#

686334

MODEL DESCRIPTION VOLTAGE MAX AMP LIST

MAX

AMP

1.0 337

LIST

260008 A6176 Heat/Cool 24 VAC 1.0 88

Page 87

Thermostats & Controls

UT Series - Low Voltage

Features

• Vertical or horizontal mounting

• Long life sealed contacts

• Does not contain Mercury

• Leveling not required

• Fahrenheit and Celsius temperature scales

• 2-3oF rated differential

• Anticipator (except UT9001)

Standard Models

UPC#

686334

523059 UT1001 Heat Only 24VAC or MV R &W None 17.60

523066 UT3001 Cool Only 24 VAC R, Y & G Cool/Off Fan/Auto 18.15

523134 UT6001 Deadband 24 VAC R, W & Y None 19.25

523073 UT8001 Heat/Cool 24 VAC RC, RH, W, Y, & G

523110 UT9001 Heat Only Millivolt R & W None 17.60

MODEL DESCRIPTION VOLTAGE TERMINALS SWITCHES LIST

Heat/Off/Cool Fan/

Auto

Master Carton: 50 pcs, 17 lbs, 19” x 11.5” x 9”

19.25

RK Series - Low Voltage

Features

• Heat only models

• Positive off

• Does not contain Mercury

• Leveling not required

• Long life sealed contacts

• Fahrenheit and Celsius temperature scales

• 2-3oF rated differential

Standard Models

Two switch unit shown.

UPC #

686334

526012 RK120EAA Heat Only 24VAC or MV 50o-90oF Yes 17.60 526203 RK124EAA Heat Only 24VAC or MV 35o-75oF Yes 17.60 526050 RK130EAA Heat Only Millivolt 50o-90oF No 14.85 526326 RK134EAA Heat Only Millivolt 35o-75oF No 14.85 526142 RKWP1AA Wall Plate NA NA NA 3.85

MODEL DESCRIPTION VOLTAGE RANGE ANTICIPATOR LIST

Master Carton: 100 Pcs, 24 lbs, 16.5” x 15” x 8”

Low Voltage Relays

Features

• Snap action switch

• 1/2” male conduit spud

• 45 second average time delay

• Temperature range - 50o - 90oF

• Built-In transformer

Standard Models

UPC#

686334

260039 24A05A-1 120 Volts

260046 24A05E-1 208 Volts

260053 24A01G-3 240 Volts

260107 24A06G-1 240 Volts

MODEL

PRIMARY VOLTAGE

DESCRIPTION LIST

Single Switch, single throw with In-Built Transformer for

remote mounting or in a factory provided optional enclosure

Two switch, single throw with In-Built Transformer, 25

Amps per switch

TG Series Thermostat Guards

Standard Models

179

264

Features

• 8 tumbler locks

UPC#

686334 589123 TG1 Plastic Stat Guard/ 6.25” x 3.625” x 3.25” Opening 32 589109 TG1B Metal Stat Guard/ 5.25” x 4.625” x 3” Opening 57 589130 TG2 Plastic Stat Guard/ 5.25” x 4.625” x 3.25” Opening 37 589161 TG2B Metal Stat Guard/ 6.25” x 3.625” x 3.25” Opening 57

589116 TG3 Plastic Stat Guard/ 8.125” x 4.625” x 3.625” Opening 37 589178 TG3B Metal Stat Guard/ 6.75” x 4.50” x 3.50” Opening 70 523615 TG4 Plastic Stat Guard / 3.50” x 3.937” x 1.75” Opening 37 523622 TG5 Plastic Stat Guard / 5” x 3.31” x 1.75” Opening 37 523639 TG6 Plastic Stat Guard / 5.75” x 4.625” x 1.75” Opening 37

MODEL DESCRIPTION LIST

Page 88

Thermal Area Treatment Heaters

Sizing formula for TAT Series heaters: 50 Watts of heat per square foot of heated space or 50W/sq ft.

Example: An 800 square foot structure will require 40,000 Watts of heat to obtain 150 degrees of prolonged heat to be effective. (800 sq ft x 50 Watts per square foot = 40,000 Watts of heat or 40KW of heat)

Product Features

• Heavy duty industrial construction

• Forward curved centrifugal blower

• High Temperature ball bearing motor

• Optional replaceable lter

• Single point power connection

• 24 volt control

• Heavy duty spiral nned elements constructed of stainless steel

• Safety devices include airow switch, automatic limit control and manual reset limit control for secondary protection

• Disconnect switch and Unit Mounted Thermostat with range of up to 120 to 150

• The “TAT” series is sold as a system that includes the base unit, three supplemental units and the remote timer/ temperature control (supplemental units may be purchased separately if necessary)

Product Specications

APPLICATIONS:

• The "TAT" series is designed to heat small and mid-sized rooms up to 150 heating to areas infected with insects. It kills adult insects and will dehydrate larvae and eggs, making them unable to hatch. Although chemical sprays only target adult insects, they can be used before utilizing the "TAT" system in order to kill the adult insects.

• The system is designed to bring the temperature up to 150

F in one hour or less, if all preliminary requirements are

met.

• The "TAT" system may be used for water remediation, as well, in combination with adequate ventilation. Specic

models for water remediation are also available.

TAT BASE UNIT:

• Heavy duty stainless steel spiral n heating elements

• High temperature, ball bearing 1/3 HP - 1075 RPM blower motor

• Forward curved centrifugal blower-900 CFM of air output

• Safety devices include airow switch, disconnect switch, automatic limit control and manual reset limit control for

secondary protection

• 50 Amp unit may be linked to a 30 Amp unit to provide heating for larger spaces.

• Timer/Temp controller may be used to control both units but must use the 50 Amp base unit as the master.

SUPPLEMENTAL TAT CONVECTORS

• 3 convectors are an integral part of each TAT system

• 120 Volt, 15 Amp (Standard wall plug) - 5120 BTU size

• Supplied with 25' prewired cable that connects them to the TAT base unit control section with a three pin connector

• If used in front of windows or large glass doors, they will reduce heat loss and provide more even heating

F. This provides effective portable

TIMER/TEMPERATURE CONTROL UNIT

• Timer/Temp Controller is an integral part of the TAT system

• 24 Volt control device that controls the heat output of the TAT base unit and up to three TAT convectors for an operating range of 120 - 150

F and for a time period of 1 -10 hours after the preset temperature is reached

• Supplied with a 25' prewired cable that connects to the TAT base unit control section using a four pin connector

• Mounts on Door outside the area being treated.

• LED lights will indicate when treatment is complete

Page 89

CORD LENGTH: 6'10"

16AWG USASI HPN CORD

CORD LENGTH: 25' 18AWG SHIELDED CABLE

16AWG USASI HPN CORD

Thermal Area Treatment Heaters

Standard Models

UPC#

686334

STYLE MODEL

NUMBER

BASE

UNIT

BASEBOARD

PERIMETER HEATER KW

TOTAL

SYSTEM

BASE

UNIT

VOLTS

BASEBOARD

PERIMETER

HEATER

VOLTS

PHASE

397568 TAT5-240-1/3BB/1T 5.3 1.5 (X3) 9.8 240 120 1 24 12.5 Nema 10-30 Nema 5-15 12,900

397629 TAT5-208-1/3BB/1T* 5.3 1.5 (x3) 9.8 208 120 1 27 12.5 ---- Nema 5-15 12,900

397551 TAT8-240-1/3BB/1T 8.4 1.5 (X3) 12.9 240 120 1 37 12.5 Nema 14-50 Nema 5-15 13,500

397612 TAT8-208-1/3BB/1T* 8.4 1.5 (x3) 12.9 208 120 1 42 12.5 ---- Nema 5-15 13,500

397520 TAT20-480-3/3BB/1T 20 1.5 (X3) 24.5 480 120 3 26 12.5 Nema L16-30 Nema 5-15 15,000

397582 TAT-ILC-25 25’ Shielded Cable 250

*208 Volt models do not have a cord supplied

Accessories

BASE

UNIT

AMP

BASEBOARD

PERIMETER

AMP-EACH CIRCUIT (3)

PLUG TYPE

LIST

BASE UNIT PERIMETER

UPC#

686334

MODEL DESCRIPTION HP CFM / RPM MAX AMPS VOLTS WT (LBS) LIST

397636 TAT-24-FAN-120V-1 Thermal Area Treatment Floor Fan 1/3 5000/1160 3.1 120 30 325

UPC#

686334

MODEL DESCRIPTION KW BTU VOLTS PHASE AMPS TEMP RISE WT (LBS) LIST

397834 TAT-30 30KW Salamander 30 102390 480 3 36 43 115 2537

397841 TAT-45 45KW Salamander 45 153585 480 3 54.2 70 125 4196

Product Dimensions

• Safety yellow heater enclosure with safety screens on both air intake and output openings.

• Optional 25’ long SO type cord, ready for plug attachment is available for each model.

• Long-life nned tubular heating elements.

• Thermostat adjustment 120° to 150° F.

• Two 10” rear wheels and a front locking caster.

• High-limit thermal cutout switch with manual reset.

• 2200 CFM

• Fan only operation feature

10.625"

HANDLE ADDS 6" TO L"

TAT 30-45

CORD LENGTH: 25' 18AWG SHIELDED CABLE

CORD LENGTH: 6'10"

TAT-24-FAN-120V-1

48"

WT. (LBS)

MODEL

• Single speed

• Head tilts 360

• Coated steel guards

• SJT type 3 conductor

• Steel hub / Aluminum blades

• Meets OSHA standards

LENGTH WIDTH HEIGHT

8.75"

DIMENSIONS

TAT-8-240-1 39” 26.5” 18” 180 TAT-5-240-1 39” 26.5” 18” 180

TAT-20-480-3 39” 30.5 18” 234

TAT-1-120-1 48” 8.5” 9.5” 23

Remote Timer 11” 3” 4.5” 5

TAT 30, 45 37” 24” 39” 115/125

TAT24-FAN-120V-1 10.5” 26” 26” 30

Page 90

Thermal Area Treatment Heaters

How It Works:

Washer

Move dryer, connect 30 Amp unit to 30 Amp dryer power supply.

Seal all exterior windows and doors before extermination process begins.

Dryer

30 Amp Power Supply

Heater Line 2

Heater Line 3

Heater Line 1

Move range/electric stove, connect 50 Amp unit to 50 Amp range power supply.

Use only if two systems are used together

Heater Line 2

AMP

TAT Base

Unit

Stove/Range

Master/Slave Unit Control Tether.

50 Amp Power Supply

Heater Line 1

Heater Line 3

AMP

TAT Base

Unit

Timer Control Line

Timer Control Unit

Diagram is for demonstrative purposes only and does not represent any actual structure or living environment. Two units may not be required for all situations, exterior climate, structure insulation, electrical service, and square footage all factor into effective treatment with this system.

Page 91

Hotpod™ Supplemental Duct Mounted Heating System

8” Hotpod

Patented Patent No. 8,285,127

6” Hotpod

Standard HotPod Models

HotPod - Features

• Use to heat cold rooms or additions without upgrading central system

•

Fan only operation for increased cfm output for A/C cycles

• 6" 1000/500 Watt and 8" 1440/720 Watt models available

• Two stage operation

• 120V corded and hard wire models available

• 10' Cord length on corded models

• Zero clearance for all models

• All models include UT8003 low voltage thermostat

• Optional wireless thermostat

• Silent boot option available for rigid duct applications Note: Silent Boot can only be used with rigid duct work

UPC#

686334

290074 HP6-1000120-2T 6” INLET, HARDWIRE 1000/500 120 8.33 26 4 1500 130 NA 10 1/2 x 8 1/2 x 6 513 290043 HP6-1000120-2CT 6” INLET, WITH CORD SET 1000/500 120 8.33 26 4 1500 130 5-15P 10 1/2 x 8 1/2 x 6 538 290081 HP8-1440120-2T 8” INLET, HARDWIRE 1440/720 120 12.6 23 6 1500 210 NA 11 x 10 1/2 x 8 625 290067 HP8-1440120-2CT 8” INLET, WITH CORD SET 1440/720 120 12.6 23 6 1500 210 5-15P 11 x 10 1/2 x 8 663

MODEL DESCRIPTION WATTS VOLTS

MIN.CIRC.

SIZE (AMP)

TEMP

RISE (F)

WT RPM CFM

NEMA

PLUG

DIMENSION

L X W X H

LIST

Multi-Pak Models - Includes 4 Hotpods

UPC#

686334

290036 HP6-1000120-2T 4 PACK 6” INLET, HARDWIRE 1000/500 120 8.33 26 16 1500 130 NA 10 1/2 x 17 x 12 2052 290111 HP6-1000120-2CT 290050 HP8-1440120-2T 4 PACK 8” INLET, HARDWIRE 1440/720 120 12.6 23 25 1500 210 NA 10 1/2 x 20 x 16 2500 290128 HP8-1440120-2CT 290333 HP6H-12PK* 12 PACK 6” INLET, HARDWIRE 1000/500 120 8.33 26 58 1500 130 NA 21 x 14 1/2 x 43 6156 290340 HP6C-12PK* 290357 HP8H-12PK* 12 PACK 8” INLET, HARDWIRE 1440/720 120 12.6 23 82 1500 210 NA 27 1/4 x 14 1/2 x 52 7500 290364 HP8C-12PK*

MODEL DESCRIPTION WAT TS VOLTS

4 PACK 6” INLET, WITH CORD SET

4 PACK 8” INLET, WITH CORD SET

12 PACK 6” INLET, WITH CORD SET

12 PACK 8” INLET, WITH CORD SET

1000/500 120 8.33 26 16 1500 130 5-15P 10 1/2 x 17 x 12 2152

1440/720 120 12.6 23 25 1500 210 5-15P 10 1/2 x 20 x 16 2652

1000/500 120 8.33 26 58 1500 130 5-15P 21 x 14 1/2 x 43 6456

1440/720 120 12.6 23 82 1500 210 5-15P 27 1/4 x 14 1/2 x 52 7956

*includes 1 HotPod display

Note: Multi-Pak specications (watts, volts, etc) are for each individual hotpod in the pack excluding weight.

MIN.CIRC.

SIZE (AMP)

TEMP

RISE (F)

WT.

LBS

RPM CFM

NEMA

PLUG

DIMENSION

L X W X H

LIST

Silent Booster™ Supplemental Duct Mounted Boosting System

Silent Booster - Features

• 120V corded and hardwire models available

• Adds 120 CFM Boost to duct heating or ventilation applications

• Can utilize optional TPI SilentBoot™ for whisper quiet operation in rigid duct application.

• 14” of duct, 4’ from register is all that is needed for installation

• Optional wireless thermostat can be utilized to control Silent Booster™ to increase room comfort

Moisture Control System - Features

• 120V, 8” Ducted Booster Fan; De-humidistat included

•

8” Silent Booster

6” Silent Booster

Standard Silent Booster Models

UPC#

686334 290371 SB6-120-T 6” SILENT BOOSTER (Hardwire) 120 15 4 1500 130 NA 10 1/2 x 8 1/2 x 6 225 290388 SB6-120-CT 6” SILENT BOOSTER (w/Cord Set) 120 15 4 1500 130 5-15P 10 1/2 x 8 1/2 x 6 250 290395 SB8-120-T 8” SILENT BOOSTER (Hardwire) 120 15 4 1500 210 NA 11 x 10 1/2 x 8 250 290401 SB8-120-CT 8” SILENT BOOSTER (w/Cord Set) 120 15 4 1500 210 5-15P 11 x 10 1/2 x 8 275

290418 MCS120-8CT

MODEL DESCRIPTION VOLTS

MOISTURE CONTROL SYSTEM

8” MOISTURE CONTROL SYSTEM

6” to 8” adapters available

• Includes all ductwork and outside damper

• Uses Heavy Duty booster fan to eliminate humidity from basements, crawl spaces, or damp areas.

MIN.CIRC.

SIZE (AMP)

120 15 4 1500 210 5-15P 11 x 10 1/2 x 8 350

WT RPM CFM

NEMA

PLUG

DIMENSION

L X W X H

LIST

Page 92

Hotpod™ Accessories, Thermostats, Ready-Pack, and MFH Models

Hotpod Accessories And Thermostat

UPC#

686334

290098 SB-6* 6” SILENT BOOT 4 37.50

290104 SB-8* 8” SILENT BOOT 4 62.50

523578 RFKIT-5 WIRELESS TRANSMITTER 6 200

Silent Boot

* Can be used with Hotpod models as a noise attenuator

Hotpod Ready-Pack Self Contained Systems

Note: does not mount to exsisting duct work.

• Includes all you need to install a complete Hotpod system

• Ideal for room or ofce additions

• RF Thermostat is standard with our Ready-Pack models, simplifying installation even further - Eliminates the need for thermostat wiring.

• Same specications for 6” and 8” Hotpod models apply to Ready-Pack

models.

MODEL DESCRIPTION LIST

HP6-1000120-2TRP 6” INLET, 1000W, 120V, READY-PACK 1137

HP6-1000120-2CTRP 6” INLET, 1000W, 120V, READY-PACK WITH CORDSET 1200

HP8-1440120-2TRP 8” INLET, 1440W, 120V, READY-PACK 1350

HP8-1440120-2CTRP 8” INLET, 1440W, 120V, READY-PACK WITH CORDSET 1390

MODEL DESCRIPTION WT LIST

Ready-Pack self contained system

RFT-1

( Shown With UT8003

Thermostat)

RFKIT-5 - Patent Pending

What’s IncludedFeatures

• 6” or 8” Hotpod with RFKIT-5 wireless thermostat and transmitter

• One outlet and one return air grill

• Two 90 degree elbows

• Flexible duct (12.5’)

• 8" models include 2 reducers - 8” to 6”

RFR-5

MFH Series Hotpod - For those LARGER areas

Features

• When the standard Hotpod is not enough

• 240V model has 6’ cord set with a NEMA-6-15P Plug

• Unit contains air ow switch

• Zero inch (0”) clearance installation

• All units are shipped with our UT8003 low voltage thermostat

• All units obtain a 33 degree temperature rise

•

RP models are Ready-Pack models and do not need existing duct work

Standard Models

UPC# 686334 290135 MFHE-0300-6-EAA 6" INLETS, 1500 W, 120V,2 STAGE THERMOSTAT 1500 120 132 250 1500 1300

290197 MFHE-0300-6-EAARP UNIT ABOVE WITH FLEX, BOOTS, GRILLS 1500 120 145 250 1500 1738 290142 MFHE-0300-6-EAAC 6" INLETS, 1500 W, 120V,2 STAGE THERMOSTAT, CORD 1500 120 132 250 1500 1338 290203 MFHE-0300-6-EAACRP UNIT ABOVE WITH FLEX, BOOTS, GRILLS 1500 120 145 250 1500 1775 290173 MFHE-0300-6-HAA 6" INLETS, 2000W, 240V, 2 STAGE THERMOSTAT 2000 240 132 250 1500 1375 290234 MFHE-0300-6-HAARP UNIT ABOVE WITH FLEX, BOOTS, GRILLS 2000 240 145 250 1500 1812 290159 MFHE-0300-8-EAA 8" INLETS, 1500W, 120V, 2 STAGE THERMOSTAT 1500 120 135 250 1500 1325 290210 MFHE-0300-8-EAARP UNIT ABOVE WITH FLEX, BOOTS, GRILLS, REDUCERS 1500 120 148 250 1500 1862 290166 MFHE-0300-8-EAAC 8" INLETS, 1500W, 120V, 2 STAGE THERMOSTAT,CORD 1500 120 135 250 1500 1362 290227 MFHE-0300-8-EAACRP UNIT ABOVE WITH FLEX, BOOTS, GRILLS, REDUCERS 1500 120 148 250 1500 1900 290180 MFHE-0300-8-HAA 8" INLETS, 3000W, 240V, 2 STAGE THERMOSTAT 3000 240 135 250 1500 1412 290241 MFHE-0300-8-HAARP UNIT ABOVE WITH FLEX, BOOTS, GRILLS, REDUCERS 3000 240 148 250 1500 1950

MODEL DESCRIPTION WAT T S VOLTS WT CFM RPM LIST

Fresh Air Make Up Units - Features

• Can be used with existing systems for fresh air intake

• Includes replaceable lter

• All units include duct stat and disconnect switch

• Available with 6" inlet and outlet only

Standard Models

UPC# 686334 290258 MFHE-0300-6-HAAF2D 6" INLETS, 3000W, 240V, FILTER, DUCT STAT 250 1500 1750 290265 MFHE-0300-6-FAAF2D 6" INLETS, 2000W, 208V, FILTER, DUCT STAT 250 1500 1700

MODEL DESCRIPTION CFM RPM LIST

Page 93

7200 Series Plenum Heater

HOW TO DESIGNATE A MODEL:

F 3 E 72 15 2 T

Phase

Element Voltage

F = 208V H = 240V G = 277V P = 480V

1 = Single Phase 3 = Three Phase

Motor Voltage

E = 120 G = 277 P = 480

Series Number

Element KW

3KW through 50KW

Manufactured in U.S.A.

Product Specications

• 20 gauge galvanized cabinet.

• Variable speed motor, factory set at maximum. Motor speed

can be eld adjusted to increase heat rise.

• Acoustically insulated with 1” berglass.

• Access panels on both sides of cabinet.

• 24 Volt controls.

• Air ow switch.

• Terminal blocks.

• Single point connection.

• Dust tight control enclosure.

• Filter rack on inlet with throw away lter.

• Inlet and outlet screens and duct connection.

• Automatic primary limit control and secondary fuse link.

• Optional wall thermostat, unit thermostat or SSR control which proportionally regulates heat output.

• Disconnect switch.

Standard Models

UPC#

686334

617680 F1G7203

606240 G1G7203 277/1 11.83 277 1 606905 F3G7203 208/3 9.32 277 1

617574 P3G7203 480/3 4.6 277 1 617666 F1G7205

606165 G1G7205 277/1 19.15 277 1.1 606424 F3G7205 208/3 14.97

606110 P3G7205 480/3 7.11 277 1.1 606554 F3E7210

617581 P3G7210 480/3 13.72 277 1.7 606516 F3E7210-2 208/3 33.05

617659 P3G7210-2 480/3 13.72 277 1.7 608602 F3E7215

606257 P3G7215 480/3 19.74 277 1.7 606943 F3E7215-2 208/3 46.93

606066 P3G7215-2 480/3 19.74 277 1.7 608831 F3E7220-2

606394 P3G7220-2 480/3 26.55 277 2.5 534420 F3E7223-2 617888 H3G7223-2 240/3 59.63 277 4.3 606875 P3G7225-2 25 480/3 34.37 277 4.3 2600 534437 H3G7230-2 606745 P3G7230-2 480/3 42.38 277 6.3 3570 618007 P3G7235-2 35 480/3 48.39 277 6.3 3780 606851 P3G7240-2 40 534444 P3G7245-2 45 480/3 62.72 277 8.6 4750 606417 P3G7250-2 50 480/3 68.74 277 8.6 5100

MODEL KW CFM RANGE

3 70-270

5 200-650

10 500-1200

15 500-1200

20 750-1600

1300-2000

1800-2800

2000-3600

VOLTS / PHASE

208/1 15.4

208/1 25.13

208/3 33.05

208/3 46.93

208/3 63.81

208/3 74.84

240/3 78.47

480/3 56.71

TOTAL

AMPS for

MOTOR &

HEATER

STAGE

MOTOR

VOLTAGE

277 1

277 1.1

120 5.3

120 8.3

120 11

277 6.3

277 8.6

FULL LOAD

AMPS for

MOTOR ONLY

MOTOR H.P.

2 MOTORS @

1/2 H.P. EACH

2 MOTORS @ 3/4 H.P. EACH

Heater Stages

See model chart for KW options.

1/15 98

1/6 11 8

1/4 141

1/2 163 2250534413 H3G7220-2 240/3 50.61 277 2.5

3/4 201

Blank = One 2 = Two

Control System

Blank = None T = Unit Thermostat

WT.

(LBS)

278

319

SSR = SSR Control

PRICE

1570606561 H1G7203 240/1 13.5 277 1

1620617765 H3G7203 240/3 8.21 277 1

1620617956 H1G7205 240/1 21.93 277 1.1

1650617994 H3G7205 240/3 13.12 277 1.1

1730617734 H3G7210 240/3 25.75 277 1.7

1810534390 H3G7210-2 240/3 25.75 277 1.7

1810608848 H3G7215 240/3 37.78 277 1.7

1900534406 H3G7215-2 240/3 37.78 277 1.7

2800

3900

4650

LIST

Page 94

7200 Series Plenum Heater

Product Dimensions

Discharge

Screen

Air Flow

AIR FLOW

3”

FILTER = A x B

FILTER=A X B

Filter Rack

Air

Inlet

5 1/2”

5 1/2" STANDARD

2”

STANDARD

Filter Rack

Inlet

Inlet Screen

Screen

7200 Series A B L

3 KW 12” 14” 28” 14” 8”

7200

5 KW 14” 18” 36” 18” 8”

SERIES

3 KW

10 & 15 KW 18” 18” 36” 18” 10”

5 KW

20 KW 18” 22” 36” 22” 10”

10&15 KW

23 & 25 KW 18” 26” 36” 26” 10”

20 KW

Note: Control panel access standard as shown.

23&25 KW

For panel on opposite side access specify and order (Figure 5).

DIMENSIONS

A B L

18" 18"

14"

18"

22"

18"

Note:

36"

36" 36"

36"

DISCHARGE

W H

DISCHARGE

W H

14"14"12" 28"

18"

22"

26"26"

8" 8"

10"

Control Panel Access Standard as Shown For Panel on Opposite

1” FILTER SLOT

OF UNIT

1" Filter Slot

* Control box depth depends on

actual components. Consult

Disconnect

Disconnect Switch

Switch

ACCESS DOORS

ON BOTH SIDES

OF UNIT

Side Access Specify And Order Figure 5.

factory for exact dimensions.

ELECTRIC

CONTROL

PANEL

DIMENSIONS

7200

SERIES

7200 Series A B L

25-30-35 KW

25-30-35 KW 18” 44” 36” 44” 10”

40-45-50 KW

40-45-50 KW 18” 52” 36” 52” 10”

A B

DISCH'GE

W X H

DISCHARGE

44 36

44 X 10

W H

52 X 10

5218

Discharge

Screen

NOTE: Control Panel Access

Note: Control panel access

Standard as Shown

standard as shown. For panel

For Panel on Opposite

on opposite side access specify

Side Access Specify And Order Figure 5.

and order (Figure 5).

2”

3”

5 1/2’

STANDARD

5-1/2"

Filter Rack

Disconnect

Disconnect Switch

Switch

ELECTRIC CONTROL

Electric Control Panel

PANEL

ACCESS DOORS

Access

ON BOTH SIDES

On Both Sides Of Unit

OF UNIT

1" Filter Slot

1” FILTER SLOT

Page 95

7300 Series Plenum Heater

HOW TO DESIGNATE A MODEL:

F 3 E 73 15 2 T

Phase

Element Voltage

F = 208V H = 240V G = 277V P = 480V

1 = Single Phase 3 = Three Phase

Motor Voltage

E = 120 G = 277 P = 480

Series Number

Element KW

3KW through 18KW

Heater Stages

See model chart for KW options.

Control System

Blank = One 2 = Two

Manufactured in U.S.A.

The 7300 Series LowBoy Plenum Heater is designed to t jobs where the clear space between the ceiling

and the oor above is as small as 11-3/4 inches.

Product Specications

• 20 gauge galvanized cabinet.

• Variable speed motor, factory set at maximum. Motor speed

can be eld adjusted to increase heat rise.

• Acoustically insulated with 1” berglass.

• Access panels on bottom of unit.

• 24 Volt controls.

• Air ow switch.

• Terminal blocks.

• Single point connection.

• Dust tight control enclosure.

• Filter rack on inlet with throw away lter.

• Inlet and outlet screens and duct connection.

• Automatic primary limit control.

• Optional wall thermostat, unit thermostat or SSR control which proportionally regulates heat output.

• Disconnect switch.

Standard Models

SSR = SSR Control

Blank = None T = Unit Thermostat

UPC#

686334

618076 F1G7305

606301 G1G7305 277/1 20

617642 F3G7305 208/3 15

606455 P3G7305 480/3 8

609968 F3E7310

617598 P3G7310 480/3 14 277 2

606363 F3E7310-2 208/3 32

617697 P3G7310-2 480/3 14 277 2

534482 H3G7312

534499 P3G7312 480/3 17 277 3

608596 F3E7312-2 208/3 41

617703 P3G7312-2 480/3 17 277 3

534529 H3G7315

608725 P3G7315 480/3 21 277 3

618106 F3E7315-2 208/3 49

617536 P3G7315-2 480/3 21 277 3

608763 P3G7318

606189 P3G7318-2 480/3 25 2 277 3 2800

MODEL KW

CFM

RANGE

170-950

270-1500

VOLTS/

PHASE

208/1 26

208/3 32

240/3 32

240/3 39

480/3 25 1 277 3 2750

TOTAL AMPS for

MOTOR & HEATER

STAGE

MOTOR

VOLTAGE

FULL LOAD AMPS

for MOTOR ONLY

277 2

277 2 1760534451 H3G7305 240/3 14

120 4

277 3

120 8

277 3

120 8

MOTOR H.P.

1/4 163

2 Motors @

1/4 HP Each

WT.

(LBS)

219

LIST

PRICE

1700617543 H1G7305 240/1 22

1950617734 H3G7310 240/3 26 277 2

2000534468 H3G7310-2 240/3 26 277 2

2500

2550534505 H3G7312-2 240/3 32 277 3

2600

2650608510 H3G7315-2 240/3 39 277 3

Page 96

Air Flow

Discharge

Screen

7300 Series Plenum Heater

Product Dimensions

6”

Inlet

Screen

2”

8 1/2"

8 1/2”

Filter Rack

Air Flow

1" Filter

1” Filter

ELECTRIC CONTROL

PANEL

Disconnect

Switch

ELECTRIC

CONTROL

Panel

7300 Series C F G H L W

7300 SERIES

5 & 10 KW

5 & 10 KW 28, 75” 1” 6” 11.75” 45” 26” 8” 10”

Note: Dimension C and G will vary

DIMENSIONS

28.75" 1"H11.75"

NOTE:Dimension C and G Will Vary With Accessories.

with accessories.

5 1/2”

5 1/2"

Note: Control panel access

NOTE: Control Panel access

standard as shown. For panel

Standard as shown

on opposite side access specify

For Panel on Opposite

and order (Figure 5).

Side Access Specify And Order Figure 5.

16 1/2"

16 1/2”

Inlet

DIMENSIONS

C F G

Inlet

DISCHARGE

A B

26"

10"8"45"

6”

8 1/2"

8 1/2”

Note: Control panel access

NOTE:

standard as shown. For panel

Control Panel Access

on opposite side access specify

Standard as Shown For Panel On Opposite

and order (Figure 5).

Side Access Specify And Order Figure 5.

Filter Rack

Air Flow

(2) 1" Filters

(2) 1” Filters

33 "

33”

Inlet

2”

AIR FLOW

Air Flow

Discharge

Screen

DIMENSIONS

7300 Series C F G H L W

12, 15, & 18 KW 28, 75” 2” 6” 11.75” 45” 43” 8” 20”

Note: Dimension C and G will vary with accessories.

7300 SERIES

12,15 & 18 KW

NOTE:Dimension C and G Will Vary With Accessories.

DIMENSIONS

C F G

28.75" 2"H11.75"

Disconnect

Switch

INlet

Inlet

Screen

ELECTRIC CONTROL

ELECTRIC

PANEL

CONTROL

PANEL

DISCHARGE

45"

43"

DISCHARGE

A B

20"8"

Page 97

PD Series Packaged Duct Heater

Manufactured in U.S.A.

Standard Features

• Galvanized Steel Element Rack - Always 1” shorter than duct height and 1/2” shorter than duct width to allow insertion clearance

• Galvanized Steel Compartment with 1/2”

berglass Insulation & Hinged Cover

• Door Interlock Disconnect Switch

• Primary Automatic Reset Temp Limiting Control

• Load Carrying Secondary over Temperature Protective Device(s)

• Denite Purpose Magnetic Contactor(s)

• Differential Pressure Fan Inter-lock Switch

• Step Down Control Transformer / 24 Volt

• Permanently Attached Wiring Diagram on inside of Terminal Compartment Cover

Standard Models

UPC

686334

617000 PD5-128-1 5 617017 PD10-1810-1 10 18 10 4.75 6.5 28 41.7 2 37 1045 617024 PD15-1812-1 15 18 12 4.75 6.5 27 62.5 2 33 1224 617031 PD20-2012-1 20 20 12 9.125 7.5 31 83.3 2 37 1535 617048 PD25-2016-1 25 20 16 9.125 7.5 38 104.2 3 56 2447 617055 7PD2-128-1 2 617062 7PD3.5-128-1 3.5 12.6 801 617079 7PD5-128-1 5 18.1 1028 617086 8PD5-128-3 5 617093 8PD10-1810-3 10 18 10 4.75 6.5 22 27.8 1 27 918 617109 8PD15-1812-3 15 18 12 9.125 6.5 25 41.7 1 32 1068 617116 8PD15-1812-2-3 15 18 12 9.125 6.5 28 41.7 2 34 1123 617123 8PD20-2012-3 20 20 12 9.125 6.5 40 55.6 2 39 1358 617130 8PD25-2016-3 25 20 16 9.125 6.5 29 69.5 2 58 1368 617147 8PD30-2416-2-3 30 24 16 9.125 7.5 29 83.4 2 65 1947 617154 8PD30-2416-3 30 24 16 9.125 7.5 35 83.4 3 60 1980 617437 8PD35-2416-3 35 24 16 9.125 7.5 35 97.3 3 65 2114 617321 8PD40-2416-3 40 24 16 9.125 7.5 43 111.2 3 75 2670 617338 8PD45-3016-3 45 30 16 9.125 7.5 43 125.1 3 80 2726 617345 8PD50-3016-3 50 30 16 9.125 7.5 43 139 3 85 2781 617161 PD-128-3 5 617178 PD10-1812-3 10 18 10 4.75 6.5 22 24.1 1 26 835 617185 PD15-1812-1-3 15 18 12 4.75 6.5 20 36.2 1 30 934 617192 PD15-1812-2-3 15 18 12 9.125 6.5 26 36.2 2 33 957 617208 PD20-2012-3 19.9 20 12 9.125 6.5 28 47.9 2 39 1224 617215 PD25-2016-3 25 20 16 9.125 6.5 29 60.2 2 57 1368 617222 PD30-2416-2-3 30 24 16 4.75 6.5 25 72.3 2 57 1513 617239 PD30-2416-3-3 30 24 16 9.125 6.5 35 72.3 3 65 1580 617352 PD35-2416-3 35 24 16 9.125 7.5 35 84.3 3 65 1757 617369 PD40-2416-3 40 24 16 9.125 7.5 35 96.3 3 75 2025 617376 PD45-3016-3 45 30 16 9.125 7.5 43 108.4 3 80 2625 617383 PD50-3016-3 49.8 30 16 9.125 7.5 43 120 3 85 2737 617246 4PD5-128-3 5 617253 4PD10-1810-3 10 18 10 4.75 6.5 22 12.1 1 26 918 617260 4PD15-1812-3 15 18 12 4.75 6.5 20 18.1 1 30 968 617277 4PD15-1812-2-3 15 18 12 9.125 6.5 26 18.1 2 34 1112 617284 4PD20-2012-3 20 20 12 9.125 6.5 26 24.1 2 39 1135 617291 4PD25-2016-3 25 20 16 9.125 6.5 22 30.1 2 58 1169 617307 4PD30-2416-2-3 30 24 16 4.75 6.5 18 36.2 2 65 1201 617314 4PD30-2416-3-3 30 24 16 9.125 6.5 24 36.2 3 65 1268 617390 4PD35-2416-3 35 24 16 9.125 6.5 26 42.2 3 65 1624 617406 4PD40-2416-3 39.9 24 16 9.125 6.5 40 48.1 3 75 1836 617420 4PD50-3016-3 50 30 16 9.125 6.5 36 60.2 3 85 2225

MODEL NUMBER KW

POWER VOLTS/

PHASE

240-1

277-1 12 8 4.75 6.5 26

208-3

240-3

480-3

DUCT

WIDTH

DUCT

HEIGHT

12 8 4.75 6.5 26 20.9 1 22 779

12 8 4.75 6.5 26 13.9 1 22 899

12 8 4.75 6.5 26 12.1 1 21 756

12 8 4.75 6.5 26 6.1 1 21 867

DIMENSIONS

C E M

AMPS

7.2

CONTROL

STEPS

1 21

WT.

(LBS.)

LIST

779

Page 98

Product Index Listing

Model

2605 20

2607 20

2610 20

2615 20

2620 20

2625 20

2630 20

2640 20

2650 20

8510 28

8512 28

8513 28

8514 28

8515 28

8516 28

8517 28

8518 28

8519 28

8520 28

8522 28

8523 28

8524 28

8525 28

8526 28

8527 28

8528 28

8529 28

8530 28

8532 28

8533 28

8534 28

8535 28

8536 28

8537 28

8538 28

8539 28

9128 56

9136 56

9148 56

9160 56

9172 56

9184 56

9196 56

9328 58

9336 58

9348 58

9360 58

9372 58

9384 58

9396 58

91108 56

Page

Model

91120 56

93108 58

93120 58

316422 76

880435 76

880442 76

880459 76

880466 76

880497 76

880510 76

880527 76

31939009 69

31940009 69

31941009 69

A1560 80

DBTS IECR 62

170-TS 79

178 TMC 79

188 TASA 79

18D-2-30CF 74

18D-2-80CF 74

198 TMC 79

222-30-TH-208V 68

222-30-TH-240V 68

222-30-TH-277V 68

222-30-TH-480V 68

222-30-THSS-208V 68

222-30-THSS-240V 68

222-30-THSS-277V 68

222-30-THSS-480V 68

222-60-TH-208V 68

222-60-TH-240V 68

222-60-TH-277V 68

222-60-TH-480V 68

222-60-THSS-208V 68

222-60-THSS-240V 68

222-60-THSS-277V 68

222-60-THSS-480V 68

222-90-TH-208V 68

222-90-TH-240V 68

222-90-TH-277V 68

222-90-TH-480V 68

222-90-THSS-208V 68

222-90-THSS-240V 68

222-90-THSS-277V 68

222-90-THSS-480V 68

222-A30-TH-208V 68

222-A30-TH-240V 68

Page

Model

222-A30-TH-277V 68

222-A30-TH-480V 68

222-A30-THSS-208V 68

222-A30-THSS-240V 68

222-A30-THSS-277V 68

222-A30-THSS-480V 68

222-A60-TH-208V 68

222-A60-TH-240V 68

222-A60-TH-277V 68

222-A60-TH-480V 68

222-A60-THSS-208V 68

222-A60-THSS-240V 68

222-A60-THSS-277V 68

222-A60-THSS-480V 68

223-30-TH-208V 69

223-30-TH-240V 69

223-30-TH-277V 69

223-30-TH-480V 69

223-30-THSS-208V 69

223-30-THSS-240V 69

223-30-THSS-277V 69

223-30-THSS-480V 69

223-60-TH-208V 69

223-60-TH-240V 69

223-60-TH-277V 69

223-60-TH-480V 69

223-60-THSS-208V 69

223-60-THSS-240V 69

223-60-THSS-277V 69

223-60-THSS-480V 69

223-90-TH-208V 69

223-90-TH-240V 69

223-90-TH-277V 69

223-90-TH-480V 69

223-90-THSS-208V 69

223-90-THSS-240V 69

223-90-THSS-277V 69

223-90-THSS-480V 69

24A01G-3 87

24A05A-1 87

24A05E-1 87

24A06G-1 87

303EX16RW 34

303EX16RW 46

303EX32RW 34

303EX32RW 46

303EX8RW 34

303EX8RW 46

305EX16 39

305EX32 39

305EX8 39

Page

Model

30R 34

30R2 34

30R7 34

30R8 34

32T1 46

32T2 46

3310EX33R 45

3310EX33WR 45

3320EX16 40

3320EX33 40

3380EX33 34

342-30-TH-208V 68

342-30-TH-240V 68

342-30-TH-480V 68

342-30-THSS-208V 68

342-30-THSS-240V 68

342-30-THSS-480V 68

342-60-TH-208V 68

342-60-TH-240V 68

342-60-TH-480V 68

342-60-THSS-208V 68

342-60-THSS-240V 68

342-60-THSS-480V 68

342-90-TH-208V 68

342-90-TH-240V 68

342-90-TH-480V 68

342-90-THSS-208V 68

342-90-THSS-240V 68

342-90-THSS-480V 68

342-A30-TH-208V 68

342-A30-TH-240V 68

342-A30-TH-480V 68

342-A30-THSS-208V 68

342-A30-THSS-240V 68

342-A30-THSS-480V 68

342-A60-TH-208V 68

342-A60-TH-240V 68

342-A60-TH-480V 68

342-A60-THSS-208V 68

342-A60-THSS-240V 68

342-A60-THSS-480V 68

343-30-TH-208V 69

343-30-TH-240V 69

343-30-TH-480V 69

343-30-THSS-208V 69

343-30-THSS-240V 69

343-30-THSS-480V 69

343-60-TH-208V 69

343-60-TH-240V 69

343-60-TH-480V 69

343-60-THSS-208V 69

Page

INDEX

Page 99

Product Index Listing

Model

343-60-THSS-240V 69

343-60-THSS-480V 69

343-90-TH-208V 69

343-90-TH-240V 69

343-90-TH-480V 69

343-90-THSS-208V 69

343-90-THSS-240V 69

343-90-THSS-480V 69

INDEX

3900AC 51

3900ACC 51

3900-CS 51

3900-CSC 51

3900DS 51

3900DSC 51

3900-ICS 51

3900-ICSC 51

3900-OCS 51

3900-OCSC 51

3900REC 51

3900RECC 51

3900T1 51

3900T1C 51

3900T2 51

3900T2C 51

3900WW120 51

3900WW28 51

3900WW36 51

3900WW48 51

3900WW60 51

3900WW72 51

3900WW96 51

39BS120 51

39BS120C 51

39BS28 51

39BS28C 51

39BS36 51

39BS36C 51

39BS48 51

39BS48C 51

39BS60 51

39BS60C 51

39BS72 51

39BS72C 51

39BS96 51

39BS96C 51

4300EX16 47

4300EX16W 47

4300EX16W 48

4300EX32 47

4300EX32W 47

4300EX32W 48

Page

Model

4300EX8 47

4300EX8W 47

4300EX8W 48

4300P 47

4300PB 40

4300PW 47

4300PW 48

43T 47

43T 48

43T2 47

4400EX16 40

4400EX32 40

4400EX8 40

462-30-TH-480V 68

462-30-THSS-480V 68

462-60-TH-480V 68

462-60-THSS-480V 68

462-90-TH-480V 68

462-90-THSS-480V 68

462-A30-TH-480V 68

462-A30-THSS-480V 68

462-A60-TH-480V 68

462-A60-THSS-480V 68

463-30-TH-480V 69

463-30-THSS-480V 69

463-60-TH-480V 69

463-60-THSS-480V 69

463-90-TH-480V 69

463-90-THSS-480V 69

483 TM 79

48T2 48

4PD10-1018-3 97

4PD15-1218-2-3 97

4PD15-1218-3 97

4PD20-1220-3 97

4PD25-1620-3 97

4PD30-1624-2-3 97

4PD30-1624-3-3 97

4PD35-1624-3 97

4PD40-1624-3 97

4PD50-1630-3 97

4PD5-812-3 97

630-05129 73

630-10209 73

630-10249 73

630-16209 73

630-16249 73

630-16279 73

630-16489 73

630-25209 73

630-25249 73

Page

Model

630-25279 73

630-25489 73

630-36489 73

630-38579 73

631-16249 73

631-25489 73

631-25609 73

631-38579 73

632-1620 69

632-1620 73

632-1624 69

632-1624 73

632-2548 69

632-2548 73

6333D052033B30D0F 25

6333D052433B30D0F 25

6333D053834B30D0F1 25

6333D054134B30D0F1 25

6333D054833B30D0F 25

6333D103834B30D0F1 25

6333D104134B30D0F1 25

6346D102033B30D0F 25

6346D102433B30D0F 25

6346D104833B30D0F 25

641-35611 73

641-35621 73

641-35631 73

641-35641 73

641-35661 73

641-36051 73

641-36061 73

641-36071 73

641-37211 73

641-50011 73

641-50021 73

641-70001 73

641-70011 73

641-70021 73

641-70031 73

641-70041 73

641-70241 73

641-70251 73

641-70261 73

641-70271 73

641-70281 73

641-70321 73

671-3454 73

671-3492 73

671-3784 73

671-3785 73

671-3786 73

Page

Model

671-5018 73

671-5056 73

671-5057 73

671-5058 73

671-5059 73

671-5060 73

671-5061 73

7PD2-812-1 97

7PD3.5-812-1 97

7PD5-812-1 97

8PD10-1018-3 97

8PD15-1218-2-3 97

8PD15-1218-3 97

8PD20-1220-3 97

8PD25-1620-3 97

8PD30-1624-2-3 97

8PD30-1624-3 97

8PD35-1624-3 97

8PD40-1624-3 97

8PD45-1630-3 97

8PD50-1630-3 97

8PD5-812-3 97

9100EC 56

9100IC 56

9100OC 56

91BS012 56

91BS024 56

91BS036 56

91BS048 56

91BS060 56

91BS072 56

91BS084 56

91BS096 56

91BS108 56

91BS120 56

9300EC 58

9300IC 58

9300OC 58

93BS012 58

93BS024 58

93BS036 58

93BS048 58

93BS060 58

93BS072 58

93BS084 58

93BS096 58

93BS108 58

93BS120 58

A1600 22

A1601 22

A5105 15

Page

Page 100

Product Index Listing

Model

A51100 18

A5120 15

A5150 15

A5175 18

A5520/UHB 10

A6176 17

A6176 86

AD5120 15

AD5150 15

AD5175 15

AET5DWS 83

AET5SWS 83

AF3401-24 36

AF3402-24 36

AF3403-24 36

AG3401-24 36

AG3402-24 36

AG3403-24 36

AH3401-24 36

AH3402-24 36

AH3403-24 36

APS-3C 74

ASHDB ECL 63

ASHDB ECR 63

ASHDB IC 63

ASHDB OC 63

ASHDB SP 63

ASHDB WT 63

ASHDB-10 63

ASHDB-2 63

ASHDB-3 63

ASHDB-4 63

ASHDB-5 63

ASHDB-6 63

ASHDB-7 63

ASHDB-8 63

ASHDB-8/20-1000BS 63

ASHDB-8/20-100BS 63

ASHDB-8/20-200BS 63

ASHDB-8/20-300BS 63

ASHDB-8/20-400BS 63

ASHDB-8/20-500BS 63

ASHDB-8/20-600BS 63

ASHDB-8/20-700BS 63

ASHDB-8/20-800BS 63

ASHDB-8/20-900BS 63

ASHDB-9 63

B5105 15

B51100 18

Page

Model

B5150 15

B5175 18

BBS024A 55

BBS024AW 55

BBS024C 55

BBS028A 55

BBS028AW 55

BBS028C 55

BBS036A 55

BBS036AW 55

BBS036C 55

BBS040A 55

BBS040AW 55

BBS040C 55

BBS048A 55

BBS048AW 55

BBS048C 55

BBS060A 55

BBS060AW 55

BBS060C 55

BBS072A 55

BBS072AW 55

BBS072C 55

BBS084A 55

BBS084AW 55

BBS084C 55

BBS096A 55

BBS096AW 55

BBS096C 55

BBS120A 55

BBS120AW 55

BBS120C 55

BDR115 55

BDR115B 55

BDR115W 55

BOX 3310 40

BOX3310 34

BOX3310 45

CB ECL 63

CB ECR 63

CB IC 63

CB MF 63

CB OC 63

CB SP 63

CB WT 63

CB-10 63

CB-1000BS 63

CB-100BS 63

CB-2 63

CB-200BS 63

CB-3 63

Page

Model

CB-300BS 63

CB-4 63

CB-400BS 63

CB-5 63

CB-500BS 63

CB-6 63

CB-600BS 63

CB-7 63

CB-700BS 63

CB-8 63

CB-800BS 63

CB-9 63

CB-900BS 63

CF36 82

CF48 82

CF60 82

CFHD36 82

CFHD48 82

CFHD60 82

CH-2212-1C 77

CH-6424-1C 77

CHWG-222 69

CHWG-223 69

CHWG-342 69

CHWG-343 69

CHWG-462 69

CHWG-463 69

CIT-1 74

CKTD110 84

CP122 37

CP122i 37

CP123 37

CP123i 37

CP125 37

CP125i 37

CP127 37

CP127i 37

CP2202i 37

CP2203i 37

CP2205i 37

CP2207i 37

CP702 37

CP703 37

CP705 37

CP707 37

CP802 37

CP803 37

CP805 37

CP807 37

CS 55

CSB 55

Page

Model

CSW 55

CTBDB 55

CTBDB-TP 55

CTBDW 55

CTBSB 55

CTBSB-TP 55

CTBSW 55

CV10012X 38

CV10022Xi 38

CV10027X 38

CV100X 38

CV100Xi 38

CV100YX 38

CV11012X 38

CV11022Xi 38

CV11027X 38

CV110X 38

CV110Xi 38

CV110YX 38

CV12512X 38

CV12522Xi 38

CV12527X 38

CV125X 38

CV125Xi 38

CV125YX 38

CV4512X 38

CV4522Xi 38

CV4527X 38

CV45X 38

CV45Xi 38

CV45YX 38

CV6012X 38

CV6022Xi 38

CV6027X 38

CV60X 38

CV60Xi 38

CV60YX 38

CV7512X 38

CV7522Xi 38

CV7527X 38

CV75X 38

CV75Xi 38

CV75YX 38

CV9012X 38

CV9022Xi 38

CV9027X 38

CV90X 38

CV90Xi 38

CV90YX 38

Page

INDEX