Page 1
Electric Infrared
Outdoor Heating Systems
Overhead Infrared Heaters for Snow / Ice and
Outdoor Spot Heating Applications
Outdoor Comfort
Heat Applications
z
Restaurant Waiting Areas
z
Outdoor Cafes
z
Smoking Shelters
z
Bus & Train Stations
z
Golf Driving Range
z
Remote Work Stations
Outdoor Heater
Models Available
z
2 Element Mul-T-Mount Heater
z
3 Element Mul-T-Mount Heater
z
Single Element Stainless Steel
RPH Heater
z
Single Element OCH Heater
Advantages of Electric Infrared
z
Instant Heat
z
Clean - No Fumes
z
No motors, moving parts, blowing
air currents or drafts
z
No bi-products of combustion
z
Maintenance free
z
Safe - UL/C-UL Listed for indoor &
completely exposed outdoor areas
A Division of TPI Corporation
Fostoria Industries, Inc.
1200 N. Main St.
Fostoria, OH 44830
419-435-9201
1-800-495-4525
www.fostoriaindustries.com
Comfort Heating Systems
TPI Corporation
P.O. Box 4973
Johnson City, TN 37602
MADE IN
THE USA
1-800-251-0382
www.tpicorp.com
Page 2
Fostoria’s “Mul-T-Mount” MTM
high-density, Quartz Lamp Infrared
Heaters provide instantaneous
radiant heat in areas where a
forced air heater would require
more time and energy to heat.
Electric Infrared heats people and
objects directly, and re-radiates in
the form of convection heat.
Objects within the reflector/heat
pattern such as tools, work benches and floors are quickly warmed.
The 2 - element MTM heater is
offered in either 20 ga. SS
(Stainless Steel) or galvannealed
steel with brown enamel finish. The
3 - element MTM heater is offered
in a 20 ga. SS housing cavity.
All Mul-T-Mount heaters include
Clear Quartz Infrared Lamps and
are equipped with engineered gold
anodized aluminum reflectors and
end caps.
Because of the generated heat
output and versatility, this is the
only infrared heater designed for
snow and ice control applications.
These units are the best infrared
heaters for ceiling / overhang
heights that exceed 10' feet.
Mul-T-Mount Reflector Patterns
Mul-T-Mount Reflector Patterns
30° Symmetric
30° Asymmetric
60° Symmetric
60° Asymmetric
90° Symmetric
30° Symmetric
30° Asymmetric
60° Symmetric
60° Asymmetric
90° Symmetric
2 & 3 Element Mul-T-Mount Heaters
Shipped with Clear Quartz Lamps
Model Configuration
Features
z
UL & C-UL Listed for suspended, totally exposed (outdoor),
high bay (indoor) comfort heating and exterior
snow/ice control applications
z
UL & C-UL Listed for recessed applications
z
50% higher watt densities for 3-element units
z
2 Lamp wiring, single-phase
(consult factory for 3-phase wiring)
z
3 Lamp wiring, three or single-phase
z
New Feature: Built-in surface mounting bracket allows
for fixture adjustment up to a 45° horizontal tilt.
z
Snow & Ice Control Systems also available
Mul-T-Mount Infrared Series
Optional Mounting Brackets
z
Vertical Mounting Bracket (Model VMB-41-SS)
Allow units to mount 36” from a vertical surface to the
center of the heater
z
Recessed Mounting Frames (RMF-Series)
Mul-T-Mounts are UL & C-UL Listed for recessed applications
such as outdoors canopies or interior ceilings
z
Wire Guards (CHWG-Series)
Optional wire guards are available for all 2 & 3-Lamp units
Mul-T-Mount Heaters
Fostoria Industries, Inc. zz1200 N. Main St. zFostoria, OH 44830 z1-800-495-4525
208-480 Volt Applications
kW
* - Stainless Steel Housing Material Only.
Notes:
z
462/463 Series offered in 480 & 600 Volts ONLY.
z
Infrared heaters can be controlled from various power control options.
z
Please consult the factory for complete design and technical assistance
regarding your particular heating application.
SERIES
222 24.0 15.0 7.8 2 208, 240, 277, 480 10,922 3.2
223 24.0 21.5 7.8 3 208, 240, 277, 480 16,382 4.8
342 33.0 15.0 7.8 2 208, 240, 480 17,065 5.0
343 33.0 21.5 7.8 3 208, 240, 480 25,298 7.5
462 46.0 15.0 7.8 2 480, 600 24,915 7.3
463 46.0 21.5 7.8 3 480, 600 37,372 11.0
Dimensions (Inches)
Length Width Height
SERIES
222 30 TH 208V
223 (*) 60 240V
342 90 277V
343 (*) A30 480V
462 A60
463 (*)
Model Example:
REFLECTOR
PATTERN
222- 30- TH SS- 240V
Number of
TAB
HINGE
Available
Eleme nts
Voltages
MATERIAL VOLTAGE
Blank = Brown
Enamel
SS = Stainless
Steel
BTU'S
Page 3
Electric Infrared Heaters
A Division of TPI Corporation
Features:
z
Compact Design 24" x 5-3/8" x 4-1/2"
z
Stainless Steel Housing
z
Coilzak Bright Aluminum Reflector
z
Red Quartz Lamp (1)
z
Top Center Mounting Plate
z
Single-Phase Wiring
Accessory:
z
Wire Guard (RPHWG)
Models Watts Volts
RPH-208-A 1600W 208V
RPH-240-A 1600W 240V
60° Symmetrical Reflector Pattern
8' Mounting Height
Sizing Application Information
Single Element RPH Infrared Series
Application A
Materials Needed to Raise Temp. 15° to 20° F
Heaters:
z
(2) RPH-240-A
Brackets:
z
Uses conduit nipple (supplied by installer)
to achieve a 45° inward tilt
Optional Controls:
z
Variable Controller
z
On/Off Switch
z
Contactor Panel.
2 Heaters Per Table = 3200 Watts
15° to 20° F Temp. Rise
To achieve desired results,
mount heaters 6’ apart at
an 8’ height and tilt heaters
15° inward.
(10' x 10'
100 sq. ft.)
Application A
45° Inward Tilt
6' Between Heaters
10' Canopy
8' Mtg. Ht.
(32 watts per sq. ft.)
Features:
z
Brown Baked on Enamel
z
Compact Single Element Design
z
46" or 57" (120, 208 & 240 volt)
z
Frosted Quartz Tube Included
z
Coilzak Bright Aluminum Reflector
z
Weather Tight Junction Box
z
UL & C-UL Listed for Total Exposed Areas
z
6' Long Cordset
(HSW NEMA 5-15P)
z
Custom Built Stainless Steel Housing
z
Field Converted for Direct Wire
Models Watts Volts
OCH-46 1500W 120V
OCH-46 2000W 240V
OCH-57 3000W 208V
OCH-57 3000W 240V
60° Symmetrical Reflector Pattern
8' Mounting Height
OCH Infrared Series
Application A
Materials Needed to Raise Temp. 10° to 15° F
Heaters:
z
(1) OCH-57-240V
Brackets:
z
VMB-41SS (Wall Bracket)
Optional Controls:
z
Variable Controller
z
On/Off Switch
z
Contactor Panel.
Application B
Materials Needed to Raise Temp. 15° to 20° F
Heaters:
z
(2) OCH-57-240V
Optional Controls:
z
Variable Controller
z
On/Off Switch
z
Contactor Panel.
(13' x 10'
130 sq. ft.)
(10' x 20'
200 sq. ft.)
Application A
30° Inward Tilt
10' Wall
8' Mtg. Ht.
(23 watts per sq. ft.)
Application B
6' Between Heaters
10' Canopy
8' Mtg. Ht.
(30 watts per sq. ft.)
Fostoria Industries, Inc. z1200 N. Main St. zFostoria, OH 44830 z419-435-9201 z1-800-495-4525 zwww.fostoriaindustries.com
Page 4
Electric Infrared Heaters
A Division of TPI Corporation
Features:
z
Dual Reflector Design 24" x 15" x 7-7/8"
z
Brown Baked on Enamel, or
Stainless Steel Housing
z
Gold Anodized Aluminum Reflector
z
Clear Quartz Lamps (2)
z
Full-Length Top Wiring Channel
z
UL & C-UL Listed for Recessed Applications
Accessories:
z
Wire Guard (CHWG-222)
z
Ruby Red Vycor Sleeves (31939009)
z
Also Available at 3200W / 277V (24”L), or
5000W / 480V (33”L) - Consult Factory
z
VMB-41SS (Vertical Mounting Bracket)
Models Watts Volts
222-60-THSS-208V 3200W 208V
222-60-THSS-240V 3200W 240V
222-60-THSS-480V 3200W 480V
60° Symmetrical Reflector Pattern
8' - 10' Mounting Height
Sizing Application Information
Two Element Mul-T-Mount Heaters
Application A
Materials Needed to Raise Temp. 15° to 20° F
Heaters:
z
(1) 222-60-THSS-240V
z
(2) 31939009 (Vycor Sleeves)*
Brackets:
z
(1) VMB-41SS ( Wall Bracket)
Optional Controls:
z
Variable Controllers
z
On/Off Switch
z
Contactor Panel.
* - Optional sleeves, reduces
90% of element brightness
Application B
Materials Needed to Raise Temp. 20° to 25° F
Heaters:
z
(4) 222-60-THSS-240V
z
(8) 31939009 (Vycor Sleeves)*
Optional Controls:
z
Variable Controllers
z
On/Off Switch
z
Contactor Panel.
(10' x 32'
320 sq. ft.)
(10' x 10'
100 sq. ft.)
Application A
(32 watts per sq. ft.)
Application B
6' Between Heaters
(40 watts per sq. ft.)
30° Inward Tilt
8' Mtg. Ht.
8' Mtg. Ht.
10' Wall
10' Canopy
Features:
z
Triple Reflector Design 24" x 21-1/2" x 7-7/8"
z
Stainless Steel Housing
z
Gold Anodized Aluminum Reflector
z
Clear Quartz Lamps (3)
z
Full-Length Top Wiring Channel
z
Single or Three-Phase Wiring
z
UL & C-UL Listed for Recessed Applications
Accessories:
z
Wire Guard (CHWG-222)
z
Ruby Red Vycor Sleeves (31939009)
z
Also Available at 3200W / 277V (24”L), or
7500W / 480V (33”L) - Consult Factory
z
VMB-41SS (Vertical Mounting Bracket)
Models Watts Volts
223-60-THSS-208V 4800W 208V
223-60-THSS-240V 4800W 240V
223-60-THSS-480V 4800W 480V
60° Symmetrical Reflector Pattern
8' - 10' Mounting Height
Three Element Mul-T-Mount Heaters
Application A
Materials Needed to Raise Temp. 20° to 25° F
Heaters:
z
(1) 223-60-THSS-240V
z
(3) 31939009 (Vycor Sleeves)*
Brackets:
z
(1) VMB-41SS (Wall Bracket)
Optional Controls:
z
Variable Controllers
z
On/Off Switch
z
Contactor Panel.
Application B
Materials Needed to Raise Temp. 20° to 25° F
Heaters:
z
(2) 223-60-THSS-240V
z
(6) 31939009 (Vycor Sleeves)*
Optional Controls:
z
Variable Controllers
z
On/Off Switch
z
Contactor Panel.
(10' x 20'
200sq. ft.)
* Optional Sleeves, Reduces
90% of Element Brightness.
(10' x 10'
100 sq. ft.)
Application A
(48 watts per sq. ft.)
Application B
6' Between Heaters
(48 watts per sq. ft.)
30° Inward Tilt
8' Mtg. Ht.
8' Mtg. Ht.
10' Wall
10' Canopy
Fostoria Industries, Inc. z1200 N. Main St. zFostoria, OH 44830 z419-435-9201 z1-800-495-4525 zwww.fostoriaindustries.com
Page 5
Fostoria Industries, Inc.
1200 N. Main St.
Fostoria, OH 44830
419-435-9201
1-800-495-4525
www.fostoriaindustries.com
A Division of TPI Corporation
Distributed By:
TPI Corporation
P.O. Box 4973
Johnson City, TN 37602
1-800-251-0382
www.tpicorp.com
Power Control Options
Snow & Ice Control
Devices & Contactor Equipment
APS-3B
Snow and Ice Detector
(Commercial and Industrial)
The APS-3B is the main control unit for
Fostoria’s Automatic Snow & Ice Control
systems. By sensing both temperature
and moisture, the system activates and melts any accumulation until
snow and ice conditions subside. A preset “hold-on” period dries any
remaining moisture.
The enclosure is UL Listed for NEMA 3R applications. The unit houses
all of the timers and switching electronics to operate the system.
Installation is easy and should be completed by a certified electrician.
Please read all instruction manuals prior to installation.
It has the capability to monitor up to 6 sensors (above ground and/or
pavement mounted) and will automatically activate and deactivate
unlimited infrared heaters. The system can be manually activated at the
main control unit or from an optional remote switch (RCU-1).
The preset “hold-on” timer and “heat cycle” functions activate the
system from zero to ten hours after snow and ice conditions subside
to evaporate remaining moisture and melt blowing snow.
RCU-1
Remote Control Switch (Optional)
This standard size switch allows for a
convenient and economical way to monitor
and manually control the snow and ice
melting system from a remote location.
It provides indication of system power
and heater operation status.
The switch is suitable for flush or surface mounting in a standard switch
box or weather-tight box for outdoor applications.
APS-3B Snow and Ice Control Unit
Optional RCU-1
remote switching device
CIT-1
Snow Sensor (Above Ground)
This sensor can be positioned anyplace
above ground to maximize the sensors
capability. Unit will detect falling or blowing
precipitation at temperatures below 38° F.
SIT-5E
Snow Sensor (In Pavement)
Incredible durability, strength and
sensitivity! This sensor is positioned directly
into the pavement and senses actual pavement conditions.
It will (when below 38° F), detect the presence of snow and
ice, “tracked-in” slush, frost and even black ice. A built-in microprocessor
control effectively eliminates ice bridging, so there is no need for a
separate temperature sensor.
FPC
Pre-Wired Contactor Panel
Fostoria provides the contactor panels
matched to the needs of your application. A
contactor panel is necessary to handle the
heating kW load in a given infrared installation.
Since infrared heaters do not have contactors built
into the units, it is necessary that they be supplied elsewhere.
With a pre-wired “FPC” from Fostoria, the installer only needs
to supply fues and an optional main disconnect or circuit breaker.
CIT-1 remote,
above ground
snow sensor
Contact the factory direct to order your easy to
follow Electric Infrared Selection Slide Guide
and Heating Manual. These reference tools
will assist you in heater selection and sizing
information to meet all application types.
Model No.
FPC-463-2FA
SEE US IN THE
Thomas Register:
Directory, Catalog Files, CD & Online
SIT-5E
In-pavement
mounted snow
sensor
MA5-03-EORHB
Loading...