12
TPI Industrial Direct Drive Suspension Blowers
Features
• On-O rocker switch
• SJT type 3 conductor, 12’ long cord
• Aluminum blade
• Powder coated spiral wire front and rear guards
• Corrosion and dent proof high density polyethylene housing
• Meets OSHA standards
• 1 year limited warranty
• Mounting chain not included
• Made in U.S.A.
!!
WARNING: This product can expose you
to chemicals including nickel which is known
to the State of California to cause cancer,
and chromium, which is known to the State
of California to cause birth defects and/or
reproductive harm. For more information go
to www.P65Warnings.ca.gov.
• 120V, 1-Phase
• Ball bearing
• Permanent split capacitor
Motor Specications
• 2-Speed on 30” & 36” model
• 1-Speed on 42” model
• Permanently lubricated
Standard Models
SIZE
30” 1/4 08213002 SBX 30-D 4,400 3,800 7200 / 250 1050 2.7 58
36” 1/3 08213102 SBX 36-D 6,500 5,400 11500 / 320 1050 5.5 70
42” 1/2 08213202 SBX 42-D 9,000 15000 / 340 825 7.9 99
*Measured 2 feet from face of fan
MOTORHPMFG CATALOG
NUMBER
MFG MODEL
NUMBER
CFM* VELOCITY PROFILE
HIGH LOW CFM / Area Sq Ft
RPM
HIGH
AMPS
HIGH
TPI Industrial Belt Drive Suspension Blowers
Features
• On-O rocker switch on 120V, 1-Phase models
•
SJT type 3 conductor, 12’ long cord on 120V,
1 phase models
• No cord on dual voltage models
• Aluminum blade: SBX 36-B, SB 36-B-HL,
SB 42-B-HL, SB 48-B-HL
• Steel blade: SBX 42-B, SBX 48-B
•
Corrosion and dent proof high density
polyethylene housing
• Powder coated spiral wire front and rear guards
!!
WARNING: This product can expose you
to chemicals including nickel which is known
to the State of California to cause cancer,
and chromium, which is known to the State
of California to cause birth defects and/or
reproductive harm. For more information go
to www.P65Warnings.ca.gov.
External junction boxes on dual voltage models allow units to be
wired for either voltage without removing guards.
Hazardous Location models have explosion proof motors and
external junction boxes rated for Class I, Group D, & Class II, Groups
E, F & G,. (Metal housing and no switch)
Standard Models
MFG CATALOG
NUMBER
08212702 SBX 36-B 36” 115 V 1/2 6,900 14000 / 360 500 8 120
08212802 SBX 42-B 42” 1 PH 3/4 10,600 17500 / 420 430 11 135
08212902 SBX 48-B 48” ODP 1 14,400 23500 / 550 390 15 155
08509802 SB 36-B-3 36” 230 / 460 V 1/2 6,900 14000 / 360 500 2.3 / 1.1 127
08509902 SB 42-B-3 42” 3 PH 3/4 10,600 17500 / 420 430 3.3 / 1.5 143
08510002 SB 48-B-3 48” ODP 1 14,400 23500 / 550 390 3.8 / 1.9 164
08510102 SB 36-B-HL* 36” 115 / 230 V 1/2 6,900 14000 / 360 500 7.8 / 3.9 135
08510202 SB 42-B-HL* 42” 1 PH 3/4 10,600 17500 / 420 430 10.8 / 5.4 150
08510302 SB 48-B-HL* 48” EXP 1 14,400 23500 / 550 390 13.2 / 6.6 173
Note: Products listed in this section are custom built and subject to 100% cancellation/restocking charges.
Note: Photograph is a representation of stocked models. Actual model may vary slightly in appearance.
MFG MODEL
NUMBER
SIZE
MOTOR
TYPE HP CFM / Area Sq Ft
• Meets OSHA standards
• 1 year limited warranty
• Mounting chain not included
• Made in U.S.A.
• 120V, 1-Phase
• Ball bearing
• Permanent split capacitor
• 2-Speed on 30” & 36” model
• 1-Speed on 42” model
• Permanently lubricated
CFM**
VELOCITY PROFILE
Motor Specications
RPM AMPS
*Models have no listing.
**Measured 2 feet from face of fan
WT.
(LBS)
WT.
(LBS)
Loading...