TPI PM-18FO, PM-18C, PM-18S Instruction

1200 North Main St.
Fostoria, OH 44830
Phone: [phone]
Fax: [phone]
www.tpicorp.com

SELF-CONTAINED POWER MISTER

MODELS: PM-18FO, PM-18S, PM-18C

PM-18FO

IMPORTANT SAFETY

INFORMATION INSIDE

• Serious injury or death possible.

• Read, understand, and follow all

safety information and
instructions in this manual before
using or servicing this product.

• Retain these instructions for
future reference.

PM-18S

Specifications Pages 2,3
PM-18C Assembly Pages 3,4
Set-up / Operation Pages 5,6
Replacement parts
Maintenance
Warranty Page 8

If y ou h av e qu estions a bout the

pro duct you have purchased o r wo uld

like to lea ve us fee dback please

contact us v ia our we bsite

ww w.fo storiaindustries.co m

or by calling 1-800 -495-4525.

PM-18C

CONTENTS

Page 7
Page 8

Issue Date: 3-11-05 Rev. Date: 9-12-07 Rev. Level: 13 ECN: n/a OIPM P/N: 3420433

Page 1 of 8

SPECIFICATIONS

PM-18FO

coated

guard mounted on a yoke attached to the pump

An integral ground fault circuit interrupter (GFCI)

Shipped in a single carton and ready to assemble to

THANK YOU!!

contained power misting equipment for your comfort

e components and materials available

The cool air you will now enjoy when using this misting equipment is created through the process of evaporation.

contained power

misting equipment creates a “fog” by pumping water at a very low flow rate through small nozzles. When

evaporated. The heat required to evaporate the fog is

extracted from the air causing a reduced air temperature. This cooler air is then distributed to people or animals

ected by local conditions. For best results, it may be

necessary to experiment with the number of nozzles operating to achieve the cooling performance you desire.

Water supply

POR

TABLE ONLY

Thank you very much for selecting TPI Corporation’s self­conditioning needs. These products were engineered with the most reliabl
and are equipped with features to assure ease of mobility, use, and maintenance.

Heat is required to change water from a liquid to a gas or “water vapor”. TPI Corporation’s self-

combined with the air added by a fan, this fog is rapidly

creating a direct cooling effect.

The performance of your misting system can be aff

Thank you again and stay cool!

TPI Corporation’s self-contained power misting equipment is configured into three separate models:



An 18-inch fan head and pump enclosure. Model no. PM-18FO



An 18 inch fan head, pump enclosure, and 10 gallon cooler. Model no. PM-18S



An 18-inch fan head, pump enclosure, 10 gallon cooler and cart. Model no. PM-18C

All Models

Voltage (VAC) 120
Frequency (Hz) 60
Total Amps 2.2
Pump output 2 gph @ 130psi
Misting hub 4 nozzles installed
Filter 50 mesh stainless steel

Voltage (VAC) 120
Frequency (Hz) 60
Amps 1.5
HP 1/8
CFM 5750
Speeds 1

Fan Specifications

MODEL:

• One 18-inch fan head with white powder-

enclosure.

•

is attached to the power cord.

• Equipped with a power cutoff tip switch.

• One extra nozzle and two plugs included.

•

your existing 10-gallon Igloo cooler.

Issue Date: 3-11-05 Rev. Date: 9-12-07 Rev. Level: 13 ECN: n/a OIPM P/N: 3420433

Page 2 of 8

SPECIFICATIONS (continued)

PM

-

18C CART ASSEMBLY & PARTS LIST

PM-18S

coated

nted on a yoke attached to the pump

An integral ground fault circuit interrupter (GFCI) is

as water

PM-18C

coated guard

inch wheels and

a tray. (Customer assembly of these components is

An integral ground fault circuit interrupter (GFCI) is

gallon Igloo cooler is included for use as water

ITEM

NO.

10
11
12
13
14
15
16
17

1
2
3
4
5
6
7
8
9

DESCRIPTION

Mast
Washer Flat 1/4
Hex Nut 1/4-20
Bolt Carriage 1/4-20 x 1-3/4”
Base
Base Tray
Push Nut
Washer Curved
Wheel 10”
Handle Grip
Screw Hex Head 1/2-13 x 1
Washer Lock 1/2”
Screw HWH 8-32 x 3/8
Yoke
Retaining strap
Nozzle (Brass)
Plug

MODEL:

• One 18-inch fan head with white powder­guard mou
enclosure.

•

attached to the power cord.

• Equipped with a power cutoff tip switch.

• One extra nozzle and two plugs included.

• A 10-gallon Igloo cooler is included for use

reservoir.

• Shipped in two cartons and ready to assemble.

MODEL:

• One 18-inch fan head with white powder­mounted on a yoke that attaches to the cart mast.

• The cart base is supplied with two 10-

required. See assembly instructions on page 4.)

•

attached to the power cord.

• Equipped with a power cutoff tip switch.

• One extra nozzle and two plugs included.

• A 10-

reservoir.

• Shipped in a single carton and ready to assemble.

PART NO.

8045700

35042001

3442532
3440132
3409456
8499700
3504121

3448056
8483100
3409100
2474400
3419500
2326500

3314721
44134001
44108001
44108002

QTY.

1
8
8
8
1
1
2
2
2
1
1
1
1
1
1
5
2

11

12

14

16

17

13

1

Fan yoke / Mast assembly

Issue Date: 3-11-05 Rev. Date: 9-12-07 Rev. Level: 13 ECN: n/a OIPM P/N: 3420433

Page 3 of 8