Infrared Thermometers 380/381/383/384
TestProducts International, Inc.
The Value Leader
Visit www.testproductsintl.com
Combustion Control Ltd.
D. MEASUREMENT TECHNIQUES
Push Buttons
1. TRIGGER: Press and hold the trigger button on the 380/381/382/383. The
thermometer will power up and the laser will be visible (except 380). After
releasing the trigger, the thermometer will hold the last reading then
automatically turn off after 10 seconds. For extended measurement time simply
hold the trigger on and the termometer will stay in scan mode.
2. RECALL LAST READING: To recall the last reading before the unit powered off,
quickly press and release the trigger. The last reading will be displayed for an
additional 10 seconds.
3. °F/°C: The selector switch is located inside the battery compartment in the
handle. Simply swing open the two piece handle and position the slide switch.
Temperature Measurement
CAUTION: LASER RADIATION - DO NOT STARE INTO BEAM.
OUTPUT <1Mw WAVELENGTH 645 - 660nm. CLASS II LASER PRODUCT.
1. Turn the thermometer on by holding down the trigger.
2. Line up the laser (except 380) with the target and hold the front of the
thermometer eight inches from the target (spot size will be one inch at this
distance). You can not deactivate the laser on the 381.
3. Read the temperature on the LCD.
E. ACCESSORIES
Item # Description
A009A ....................................9 Volt Alkaline Battery
A380 ......................................Soft Carrying Pouch for 380/381/382/383
Combustion Control Ltd.
Loading...