TOZO Q1012 User Manual

www.tozostore.com

Q1012

Dear respectable customers,
Thank you very much for your purchase of aircraft products
manufactured by TOZO company! The built-in barometer in the
aircraft can accurately hover on the xed height, in order to you can
be safe and correct use of this product, be sure to carefully read this
specication, and to retain the convenience for future reference!

Note:

1.The motors , circuit board and battery may heat up with use. Take 10-minutes cool-down
between flights and recharge to ensure your parts last as lond as possible.

2.When out of control, just press both L2 and R2 button for emergency stop to prevent
more damage.

3. No need TF card for Q1012. The photos and video will be stored on the phone through APP (scan
the QR code on manual page 13).

Unfold the aircraft

1

2

1. When you receive the aircraft, the state of being
acquiescent is the folding state, at this time
unfold the aircraft arms respectively rotate to
outside about 120 degrees ( as shown in Figure 2),
when you hear a sound of click, the rotation has
been in place.
Note: when rotate in place stop the lateral rotation,
or else this will damage the built-in
rotational-axle structure in the aircraft arms.

3 4

2. After unfold the four arms and then unfold the
foot frames according to the shown style in
Figure 4.

1

Know your aircraft

A Blade

Front

●When ying, please take the aircraft head toward to
the front, so that you will be better to control the
aircraft.

●The central axis location of the blade are marked
"A" "B" blades, when the blade is damaged, please
follow the above shown picture to replace the blade,
when changing please note that two blades of the
same machine arm need to be replaced the same
numbers, such as "B1", on both sides of the blades
are required "B1", if "B2", is required "B2", so the
aircraft will be more stably ight.

B Blade

power switch

A BladeB Blade

Know your remote control

2

Battery cabin

LCD display

Accelerator/Left and
right rotatory rocker

Left rotation ne tunning

Right rotation

Left y

ne tuning

ne tunning

power switch

TIP: Camera key and Recording key may not have function on some
of the ying models.

Light switch

Press hold on
a second for

automatically landing

Press on the both sides

for emergency stop

Front rear left

and right rocker

Advance ne tuning
Right y ne tuning

Retreat ne tunning

High,intermediate,

low speed toggle key

Press hold on

a second for

automatically y

Flight notes

1.This product is suitable for the people who with
operating experience of model , and at least 14 years
old.

2.When using this product, please choose the wider
space, away from the barrier, crowd, high voltage
wires, communication base station and so on.

3.Do not use this product in bad weather conditions,
such as strong wind (wind speed 3 classes or more)
or thunderstorms, heavy fog weather and so on.

4.When the aircraft in ight, please keep a certain
distance from it, avoid ngers or body close to the
propeller so as not to cause harm.

3

5.There are many built-in precision electronic parts in
the aircraft, must to avoid the wet or water vapor
into the interior and lead to the failure and caused
by unexpected accident.

6.The aircraft must be far away from heat source,
prevent sunlight to avoid deformation of high
temperature even meltdown damage.

7.Do not arbitrarily remove or any modication of the
processing of this product, if have the use or
maintenance problems, please can consult the local
dealers, under their guidance to operate.

8.When using this product., be sure to abide by the
local laws and regulations, do not use it for any other
purposes other than legal provisions.

Preight preparation

1. Insert the USB cable into the computer or the
charger with USB mouth, then take the cable insert
to the lithium battery for charging.

Adapter not include

●When charging the indicator light is out of state, after
completion of charging the indicator light is on, the charging
time is about 90 minutes.

●In the process of ight, when the battery is close to
exhausted, the LED light of the aircraft will ash for
prompting.

4

2. Charging notes

●After the ight, the surface temperature of the battery will
rise, please place the aircraft for a few minutes, charging
after cooling.

●If no use for a long time, should be placed the aircraft and
battery in a cool and dry place, away from the heat source.

●When the battery is expanded, destroyed or severe fevered
etc. should immediately stop using.

●The lithium battery has a certain service life, when nd the
shorter ight time or slowly ight may need to replace the
lithium battery.

●In the process of charging the battery to prevent accidents
please place the aircraft and the charger on the ground or
in the place where there is no combustible materials.

3. Connect the power supply to the remote controller

Remote control power supply has two kinds, one is AA
size battery, another one is lithium battery, it is
recommended that using the lithium batteries in general,
dry battery only for emergency use.

Method A: Insert the lithium battery of the aircraft into the
inserting mouth of the battery in the remote
control, after placed well the battery then close
the battery cover.

5