Toyota Accessories GENUINE Quick Start Manual

Your Toyota Genuine Dash Camera automatically

begins recording when the vehicle’s ignition power

is turned on, no further action is required. When the

green light is solid, the system is activated. A short,

high-tone beep indicates that startup is complete.

Industrial Grade
Memory Card

TOYOTA GENUINE
DASH CAMERA

QUICK START GUIDE

Recording Light

Error Light

Action button

Micro SD

memory
card slot

Audio On/O

switch

MICRO SD MEMORY CARD

Note that the included micro SD card
must be inserted into the camera for it
to function.

INFINITE LOOP
RECORDING

Once activated, video and audio are
continuously recorded until the ignition
is turned o and the footage is saved on
the micro SD card. When the micro SD
card is full, the oldest video files are
then overwritten.

INCIDENT RECORDING

In the event of an abnormal shock when
driving, Incident Recording mode is
activated automatically, protecting the
video footage for the 12 seconds before
impact and the 8 seconds immediately
after on the camera’s micro SD card.
No driver action is required.

PARKING SURVEILLANCE

If the vehicle is struck while parked, even
if it is powered o, Parking Surveillance
mode will automatically record for up
to 60 seconds following the impact and
the file will be protected on the micro SD
card. No driver action is required.

AUDIO SWITCH

Audio recording can be disabled or enabled
using the Audio On/O switch.

INTERESTING EVENT
RECORDING

To capture interesting events during
your travels, quickly push the Action
button on the camera. The camera will
automatically protect the past 12 seconds
and the following 8 seconds to the
micro SD card.

ADVENTURE MODE

To capture and protect long stretches
of video/audio while driving, push and
hold the Action button on the camera
until the camera emits three short, high­tone beeps (typically 1 second). Up to 87
approximate minutes of footage will be
automatically protected.

To turn Adventure mode o, push and
hold the Action button again until three
short, high-tone beeps are emitted.

TOYOTA GENUINE DASH CAMERA

QUICK START GUIDE

TOYOTA GENUINE DASH CAMERA MOBILE APP

The Toyota Genuine Dash Camera can be
paired wirelessly to any smartphone via a
Wi-Fi connection. The video and audio
recorded by the dash camera can then be
played back on your smartphone. Various
dash camera settings can be changed using
the mobile app.

To make use of this feature, download the
application, called TOYOTA DASH CAMERA,
from Google Play Store or Apple App Store.

It is important to note that the viewer app

can only be used if the phone is connected
to the dash camera’s Wi-Fi network.

For Android phones, connection must be
made using the Wi-Fi DIRECT connection
method, (not normal Wi-Fi network
connection). Consult your smartphone’s
instruction manual for the appropriate
Wi-Fi/Wi-Fi DIRECT connection procedure.

For a detailed overview of the Toyota
Genuine Dash Camera, please refer to the
Owner’s Manual.

COMPUTER SOFTWARE

Video and audio recordings from the dash
camera’s micro SD card can be played back
and saved on a computer. Various settings
for the dash camera can be changed on
the computer using the viewer software.

Follow the instructions on the screen
to perform the installation. When it is
complete, a shortcut icon for DASH CAM
VIEWER will be created on the Desktop.
Insert the micro SD card from the dash
camera into the card reader device provided
and connect the device to the computer.

To change settings for the dash camera
select Settings-Camera Settings from the
Menu on the main screen. When the micro
SD card is reinserted into the dash camera
and the ignition key is turned on, the new
settings will take eect.

THE SOFTWARE CAN BE
DOWNLOADED HERE:

https://www.toyota.ca/toyota/en/
parts-service/accessories