Toyota FJ Cruiser Jan 2006 Owners Manual
Foreword
Welcome to the growing group of value−conscious people who drive Toyotas. We are proud of the advanced engineering and
quality construction of each vehicle we build.
This Owner’s Manual explains the operation of your new Toyota. Please read it thoroughly and have all the occupants
follow the instructions carefully. Doing so will help you enjoy many years of safe and trouble−free motoring. For
important information about this manual a nd your Toyota, read t he foll owing pages carefully.
When it comes to service, remember that your Toyota dealer knows your vehicle very well and is interested in your complete
satisfaction. Your Toyota dealer will provide quality maintenance and any other assistance you may require.
If there is not a Toyota dealer near you, please call the following number:
U.S. OWNERS:
CANADIAN OWNERS:
Please leave this Owner ’s Manual in this vehicle at the time of resale. The next owner will need this information also.
All information and specifications in this manual are current at the time of printing. However, because of Toyota’s policy of
continual product improvement, we reserve the right to make changes at any time without notice.
Please note that this manual applies to all models and explains all equipment, including options. Therefore, you may
find some explanations for equipment not installed on your vehicle.
Please access our websites for further information.
D The U.S. mainland www.toyota.com
D Hawaii www.toyotahawaii.com
D Canada www.toyota.ca
© 2006 TOYOTA MOTOR CORPORATION
All rights reserved. This material may not be reproduced or copied, in whole or in part, without the written permission of Toyota
Motor Corporation.
D When traveling in the U.S. mainland or Canada:
Toyota Customer Experience Center Toll−fr ee:1−800−331−4331
D Hawaii:
Servco Automotive Customer Services Toll−fr ee:1−888−272−5515
D When traveling in Canada or the U.S. mainland:
Toyota Canada Customer Interaction Centre Toll−free:1−888−TOYOTA−8 or 1−888−869−6828
i
2007 FJ CRUISER from Jan. ’06 Prod. (OM35857U)
Important information about this manual
Safety and vehicle damage warnings
Throughout this manual, you will see safety and vehicle damage warnings. You must follow these warnings carefully to
avoid possible injury or damage.
The types of warnings, what they look like, and how they are
used in this manual are explained as follows:
CAUTION
This is a warning against anything which may cause
injury to people if the warning is ignored. You are
informed about what you must or must not do in
order to reduce the risk of injury to yourself and
others.
NOTICE
This is a warning against anything which may cause
damage to the vehicle or its equipment if the warning
is ignored. You are informed about what you must or
must not do in order to avoid or reduce the risk of
damage to your vehicle and its equipment.
Safety symbol
When you see the safety symbol
shown above, it means: “Do not...”;
“Do not do this”; or “Do not let this
happen”.
ii
2007 FJ CRUISER from Jan. ’06 Prod. (OM35857U)
Important information about your Toyota
Occupant restraint systems
Toyota encourages you and your family to take the time to
read Section 1−3 of this Owner’s Manual carefully. In
terms of helping you understand how you can receive the
maximum benefit of the occupant restraint systems this
vehicle provides, Section 1−3 of this Owner ’s Manual is
the most important Section for you and your family to
read.
Section 1−3 describes the function and operation concerning seats, seat belts, SRS airbags and child restraint systems of this vehicle and some potential hazards you
should be aware of. These systems work together along
with the overall structure of this vehicle in order to provide
occupant restraint in the event of a crash. The effect of
each system is enhanced when it is used properly and
together with other systems. No single occupant restraint
system can, by itself, provide you or your family with the
equal level of restraint which these systems can provide
when used together. That is why it is important for you and
your family to understand the purpose and proper use of
each of these systems and how they relate to each other.
The purpose of all occupant restraint systems is to help
reduce the possibility of death or serious injury in the
event of a collision. None of these systems, either individually or together, can ensure that there is no injury in the
event of collision. However, the more you know about
these systems and how to use them properly, the greater
your chances become of surviving an accident without
death or serious injury.
Seat belts provide the primary restraint to all occupants of
the vehicle, and every occupant of the vehicle should wear
seat belts properly at all times. Children should always be
secured in child restraint systems that are appropriate for
their age and size. SRS (Supplemental Restraint System)
airbags are, as their names imply, designed to work with,
and be supplemental to, seat belts and are not substitutes
for them. SRS airbags can be very effective in reducing
the risk of head and chest injuries by preventing contact of
the head and chest with interior portions of the vehicle.
iii
2007 FJ CRUISER from Jan. ’06 Prod. (OM35857U)
In order to be effective, the SRS airbags must deploy with
tremendous speed. The rapid deployment of the SRS airbags makes the SRS airbags themselves potential sources
of death or serious injury if an occupant is too close to an
airbag, or if an object or some part of his or her body has
been placed between the occupant and the airbag at the
time of deployment. This is just one example of how the
instructions in Section 1−3 of this Owner’s Manual will help
ensure proper use of the occupant restraint systems, and
increase the safety they can provide to you and your family in the event of an accident.
Toyota recommends you to read the provisions in Section
1−3 carefully and refer to them as needed during your time
of ownership of this vehicle.
Event data recorder
Your vehicle has computers that monitor and control certain aspects of your vehicle. These computers assist in
driving and maintaining optimal vehicle performance. Besides storing data useful for troubleshooting, there is a
system to record data in a crash or a near car crash
event. This is called an Event Data Recorder (EDR).
The SRS airbag sensor assembly contains the EDR. In a
crash or a near car crash event, this device may record
some or all of the following information:
D Engine speed
D Whether the brake pedal was applied or not
D Vehicle speed
D To what extent the accelerator pedal was depressed
D Position of the transmission selector lever
D Whether the driver and front passenger wore the
seat belts or not
D Driver’s seat position
D Front passenger’s occupant classification
iv
2007 FJ CRUISER from Jan. ’06 Prod. (OM35857U)
D SRS airbag deployment data
D SRS airbag system diagnostic data
If your vehicle is equipped with a vehicle stability control
(VSC) system, its Electronic Control Unit (ECU) may contain another EDR. There are a variety of driving situations
which include activating the VSC under which the VSC
EDR will record certain information. The VSC EDR may
record some or all of the following information:
D Behavior of the vehicle
D Steering wheel angle
D Vehicle speed
D To what extent the accelerator pedal was depressed
D To what extent the brake pedal was applied
D To what extent the ECU controlled the condition of
the 4 wheels
D Vehicle stability control system diagnostic data
The information above is intended to be used for the
purpose of improving vehicle safety performance. Unlike
general data recorders, the EDR does not record sound
data such as conversation between passengers.
Toyota will not disclose the data recorded in an EDR to a
third party except when:
D An agreement from the vehicle’s owner (or the leas-
ing company for a leased vehicle) is obtained
D Officially requested by the police or other authorities
D Used as a defense for Toyota in a law suit
D Ordered by the court
However, if necessary Toyota will:
D Use the data for research on Toyota vehicle safety
performance
D Disclose the data to a third party for research
purposes without disclosing details of the vehicle
owner, and only when it is deemed necessary
D Disclose summarized data cleared of vehicle identifi-
cation information to a non−Toyota organization for
research purposes
v
2007 FJ CRUISER from Jan. ’06 Prod. (OM35857U)
New vehicle warranty
Your new vehicle is covered by the following Toyota limited
warranties:
D New vehicle warranty
D Emission control systems warranty
D Others
For further information, please refer to the “Owner’s
Warranty Information Booklet” or “Owner’s Manual
Supplement”.
Your responsibility for
maintenance
It is the owner’s responsibility to make sure that the specified maintenance is performed. Section 6 gives details of
these maintenance requirements. Also included in Section
6 is general maintenance. For scheduled maintenance information, please refer to the “Scheduled Maintenance
Guide” or “Owner’s Manual Supplement”.
Important health and safety
information about your Toyota
CAUTION
D WARNING: Engine exhaust, some of its constitu-
ents, and a wide variety of automobile components contain or emit chemicals known to the
State of California to cause cancer and birth defects and other reproductive harm. In addition,
oils, fuels and fluids contained in vehicles as
well as waste produced by component wear contain or emit chemicals known to the State of
California to cause cancer and birth defects or
other reproductive harm.
D Battery posts, terminals and related accessories
contain lead and lead compounds. Wash your
hands after handling. Used engine oil contains
chemicals that have caused cancer in laboratory
animals. Always protect your skin by washing
thoroughly with soap and water.
vi
2007 FJ CRUISER from Jan. ’06 Prod. (OM35857U)
Accessories, spare parts and
modification of your Toyota
Spark ignition system of your
Toyota
A wide variety of non−genuine spare parts and accessories
for Toyota vehicles are currently available in the market.
You should know that Toyota does not warrant these products and is not responsible for their performance, repair, or
replacement, or for any damage they may cause to, or
adverse effect they may have on, your Toyota vehicle.
This vehicle should not be modified with non−genuine
Toyota products. Modification with non−genuine Toyota
products could affect its performance, safety or durability,
and may even violate governmental regulations. In addition, damage or performance problems resulting from the
modification may not be covered under warranty.
vii
The spark ignition system in your Toyota meets all requirements of the Canadian Interference−Causing Equipment
Standard.
2007 FJ CRUISER from Jan. ’06 Prod. (OM35857U)
Installation of a mobile
two−way radio system
Tires and loading on your
Toyota
As the installation of a mobile two−way radio system in
your vehicle could affect electronic systems such as follows, be sure to check with your Toyota dealer for precautionary measures or special instructions regarding installation.
D Multiport fuel injection system/sequential multiport
fuel injection system
D SRS airbag system
D Seat belt pretensioner system
D Traction control system
D Active traction control system
(four−wheel drive models with rear differential lock)
D “AUTO LSD” system (two−wheel drive models)
D Vehicle stability control system
D Cruise control system
D Anti−lock brake system
D Electronic throttle control system
viii
Underinflated or overinflated tire inflation pressure
and the excess load may result in the deterioration
of steering ability and braking ability, leading to
an accident. Check the tire inflation pressure periodically and be sure to keep the load limits given
in this Owner’s Manual. For details about tire inflation pressure and load limits, see pages 297 and
225.
2007 FJ CRUISER from Jan. ’06 Prod. (OM35857U)
Scrapping of your Toyota
The SRS airbag and seat belt pretensioner devices in your
Toyota contain explosive chemicals. If the vehicle is
scrapped with the airbags and pretensioners left as they
are, it may cause an accident such as fire. Be sure to
have the systems of the SRS airbag and seat belt pretensioner removed and disposed of by a qualified service
shop or by your Toyota dealer before you dispose of your
vehicle.
On−pavement and off−road
driving tips
This vehicle belongs to the utility vehicle class. Utility vehicles have a significantly higher rollover rate than other
types of vehicles. This vehicle will handle and maneuver
differently from an ordinary passenger car because it is
designed for off−road use also. In addition, this vehicle
has a higher ground clearance and center of gravity than
that of an ordinary passenger car. This vehicle design feature causes this type of vehicle to be more likely to rollover. Failure to operate this vehicle correctly may result in
loss of control, accidents or vehicle rollover causing death
or serious injury. Be sure to read “Off−road vehicle precautions” on page 204 in Section 2 and “Off−road driving precautions” on page 234 in Section 3.
ix
2007 FJ CRUISER from Jan. ’06 Prod. (OM35857U)
Leak detection pump
This pump performs fuel evaporation leakage check. This
check is done approximately five hours after the engine is
turned off. So you may hear sound coming from underneath the luggage compartment for several minutes. It
does not indicate a malfunction.
x
2007 FJ CRUISER from Jan. ’06 Prod. (OM35857U)
SECTION 1− 1
OPERATION OF INSTRUMENTS AND CONTROLS
Overview of instruments and controls
Instrument panel overview 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Instrument cluster overview 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Indicator symbols on the instrument panel 7. . . . . . . . . . . . . . . . . . . . . . .
2007 FJ CRUISER from Jan. ’06 Prod. (OM35857U)
1
Instrument panel overview
"View A
(vehicles with automat ic transmission)
TS11001a
1. Side defroster outlets
2. Side vents
3. Auxiliary box
4. Instrument cluster
5. Accessory meter
6. Center vents
7. Glove box
8. Power door lock switches
9. Power window switches
10. Automatic transmission selector lever
11. Cup holders
12. Parking brake lever
13. Four−wheel drive control lever
14. Tilt steering lock release lever
15. Window lock switch
2
2007 FJ CRUISER from Jan. ’06 Prod. (OM35857U)
"View A
(vehicles with manual transmission)
TS11002a
1. Side defroster outlets
2. Side vents
3. Auxiliary box
4. Instrument cluster
5. Accessory meter
6. Center vents
7. Glove box
8. Power door lock switches
9. Power window switches
10. Four−wheel drive control lever
11. Cup holders
12. Parking brake lever
13. Manual transmission gear shift lever
14. Tilt steering lock release lever
15. Window lock switch
2007 FJ CRUISER from Jan. ’06 Prod. (OM35857U)
3
"View B
TS11003b
1. Power rear view mirror control switches
2. Instrument panel light control dial
3. Headlight and turn signal switches
4. Wiper and washer switches
5. Back window defogger switch
6. Emergency flasher switch
7. Audio system
8. Clock
9. Front passenger occupant classification
indicator light
10. Front passenger’s seat belt reminder
light
11. Air conditioning controls
12. Rear differential lock switch
13. Active traction control switch
14. Sub woofer on−off switch
15. Power outlet
16. AUX adapter
17. Intuitive parking assist switch
18. Power outlet main switch
19. “AUTO LSD” switch
20. Ignition switch
21. Cruise control switch
22. Hood lock release lever
23. Clutch start cancel switch
4
2007 FJ CRUISER from Jan. ’06 Prod. (OM35857U)
"Steeri ng switches
TS11004b
1. Volume control switch
2. “ƜƝ” switch
3. “MODE” switch
2007 FJ CRUISER from Jan. ’06 Prod. (OM35857U)
5
Instrument cluster overview
TS11005
1. Tachometer
2. Service reminder indicators and
indicator lights
3. Speedometer
6
4. Voltmeter
5. Shift position indicator lights
(automatic transmission only)
6. Engine coolant temperature gauge
2007 FJ CRUISER from Jan. ’06 Prod. (OM35857U)
7. Fuel gauge
8. Trip meter reset knob
9. Odometer and two trip meters
Indicator symbols on the instrument panel
∗
Brake system warning light
1
Driver ’s seat belt reminder light
∗
1
D Vehicle stability control system warning
∗
1
light
D Traction control system warning
∗
1
two−wheel drive models
light
D Active traction control system warning light
∗
1
(four−wheel drive models with rear
Front passenger’s seat belt reminder light
∗
1
differential lock)
D “AUTO LSD” system warning light
∗
1
(two−wheel drive models)
∗
Charging system warning light
1
Low engine oil pressure warning light
∗
Malfunction indicator lamp
1
Engine oil replacement reminder light
(for vehicles sold in U.S.A.)
Open door warning light
∗
1
∗
1
SRS warning light
Automatic transmission fluid temperature
warning light
∗
1
(four−wheel drive models)
Unengaged “Park” warning light
(four−wheel drive models)
∗
1
∗
1
∗
1
Front passenger occupant classification indicator
∗
or
Anti−lock brake system warning light
1
light
2007 FJ CRUISER from Jan. ’06 Prod. (OM35857U)
7
Headlight high beam indicator light
Turn signal indicator lights
Automatic transmission indicator lights
∗
Rear differential lock indicator light
Center differential lock indicator light
3
∗
2
Vehicle stability control system off indicator light
∗
Four−wheel drive indicator light
2
(four−wheel drive models)
Slip indicator light
“AUTO LSD” indicator light
(two−wheel drive models)
Active traction control system indicator light
(four−wheel drive models with rear differential
lock)
∗
Cruise control indicator light
∗
1
: For details, see “Service reminder indicators and warning
4
buzzers” on page 101 in Section 1−6.
∗
2
: If this light flashes, see “Four−wheel drive system” on page
120 in Section 1−7.
∗
3
: If this light flashes, see “Rear differential lock system” on
page 132 in Section 1−7.
∗
4
: If this light flashes, see “Cruise control” on page 135 in
Section 1−7.
8
2007 FJ CRUISER from Jan. ’06 Prod. (OM35857U)
SECTION 1− 2
OPERATION OF INSTRUMENTS AND
CONTROLS
Keys and Doors
Keys 10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wireless remote control 10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Side doors 16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Access doors 19. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Power windows 20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Back window 22. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Back door 23. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hood 24. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fuel tank cap 25. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2007 FJ CRUISER from Jan. ’06 Prod. (OM35857U)
9
Keys Wireless remote control—
LS12001
These keys work in every lock.
Since the side doors can be locked without a key, you should always carry a
spare key in case you accidentally lock
your keys inside the vehicle.
10
LS12002
KEY NUMBER PLATE
Your key number is shown on the plate.
Keep the plate in a safe place such as
your wallet, not in the vehicle.
If you should lose your keys or if you
need additional keys, duplicates can be
made by a Toyota dealer using the key
number.
We recommend writing down the key number and storing it in a safe place.
2007 FJ CRUISER from Jan. ’06 Prod. (OM35857U)
TS12005
1. “LOCK” switch
2. “UNLOCK” switch
3. “PANIC” switch
The wireless remote control system is
designed to lock or unlock all the side
doors and back door or activate the
“PANIC” mode from a distance within
approximately 1 m (3 ft.) of the vehicle.
When you operate any switch, push it
slowly and securely.
The wireless remote control transmitter is
an electronic component. Observe the following instructions in order not to cause
damage to the transmitter.
D Do not leave the transmitter in places
where the temperature becomes high
such as on the dashboard.
D Do not disassemble it.
D Avoid knocking it hard against other
objects or dropping it.
D Avoid putting it in water.
You can use up to 4 wireless remote control transmitters for the same vehicle.
Contact your Toyota dealer for detailed
information.
If the wireless remote control transmitter
does not actuate the doors or alarm, or
operate from a normal distance:
D Check for closeness to a radio trans-
mitter such as a radio station or an
airport which can interfere with normal
operation of the transmitter.
D The battery may be depleted. Check
the battery in the transmitter. To
replace the battery, see “—Replacing
battery” on page 15.
If you lose your transmitter, contact your
Toyota dealer as soon as possible to
avoid the possibility of theft, or an accident. (See “If you lose your wireless remote control transmitter” on page 269 in
Section 4.)
—Locking and unlocking
doors
TS12006a
Locking operation
TS12007a
Unlocking operation
2007 FJ CRUISER from Jan. ’06 Prod. (OM35857U)
11
To lock and unlock all the side doors
and back door, push the switches of
the transmitter slowly and securely.
To lock: Push the “LOCK” switch. All the
side doors and back door are locked simultaneously. At this time one beep will
be heard, and the turn signal lights flash
once.
Check to see that all the side doors and
back door are securely locked.
If any of the side doors, back door or
back window is not securely closed, locking cannot be performed by the “LOCK”
switch and a beep will sound continuously
for 10 seconds. However, if the key is in
the ignition switch, a beep will not sound.
To stop the beep, close all the side doors,
back door and back window securely or
push the “UNLOCK” switch.
The beep can be disabled. For details,
contact your Toyota dealer.
To unlock: Push the “UNLOCK” switch
once to unlock the driver’s door alone.
Pushing the switch twice within 3 seconds
unlocks all the side doors and back door
simultaneously. Each time the “UNLOCK”
switch is pushed, two beeps will be heard,
and the turn signal lights will flash twice.
This double switch operation to unlock all
the side doors and back door can be
changed to a single switch operation. For
details, contact your Toyota dealer.
When the “UNLOCK” switch is pressed,
the interior light and luggage compartment
light will come on and remain on for about
15 seconds before fading out. (For details,
see “Interior light” on page 92 and
“Luggage compartment light” on page 93
in Section 1−5.)
You have 60 seconds to open a door after
using the wireless remote unlock feature.
If a door is not opened by then, all the
side doors and back door will be automatically locked again and one beep will be
heard.
The timing for the automatic door lock
function can be changed. For details, contact your Toyota dealer.
If the “LOCK” or “UNLOCK” switch is kept
pressed in, the locking or unlocking operation is not repeated. Release the switch
and then push again.
The following adjustments can be made in
this system. For details, contact your
Toyota dealer.
D Cancelling the wireless door locking or
unlocking function
D Cancelling the flash of the turn signal
lights
D Changing the volume of beep sound
12
2007 FJ CRUISER from Jan. ’06 Prod. (OM35857U)
—Activating panic mode
TS12008
Pushing the “PANIC” switch blows the
horn intermittently and flashes the
headlights, tail lights, turn signal lights
and outside rear view mirror illumination light (on some models), and turns
on the interior and luggage compartment lights.
The “PANIC” switch is used to deter vehicle theft when you witness anyone attempting to break into or damage your
vehicle.
The alarm will last for one minute. To stop
alarm midway, push any of the switch on
the wireless remote control transmitter.
You can also stop the alarm by turning
the ignition key from the “LOCK” to “ON”
position.
The “PANIC” mode does not work when
the ignition key is in the “ON” position.
This alarm function can be disabled. For
details, contact your Toyota dealer.
2007 FJ CRUISER from Jan. ’06 Prod. (OM35857U)
For vehicles sold in U.S.A.
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful
interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
13
NOTICE:
This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment
generates, uses and can radiate radio
frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is
no guarantee that interference will not
occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
D Reorient or relocate the receiving an-
tenna.
D Increase the separation between the
equipment and receiver.
D Connect the equipment into an outlet
on a circuit different from that to
which the receiver is connected.
D Consult the dealer or an experienced
radio / TV technician for help.
FCC WARNING:
Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
For vehicles sold in Canada
Operation is subject to the following two
conditions:
(1) this device may not cause interference, and (2) this device must accept
any interference, including interference
that may cause undesired operation of
the device.
14
2007 FJ CRUISER from Jan. ’06 Prod. (OM35857U)
—Replacing battery
For replacement, use a CR2016 lithium
battery or equivalent.
CAUTION
Special care should be taken to prevent small children from swallowing
the removed transmitter battery or
components.
NOTICE
z When replacing the battery, be care-
ful not to lose the components.
z Replace only with the same or
equivalent type recommended by a
Toyota dealer.
z Dispose of used batteries according
to the local laws.
Replace the transmitter battery by following these procedures:
TS12009
1. Using a coin or equivalent, open the
transmitter case.
TS12010
2. Remove the discharged transmitter battery by ballpoint pen.
Insert the tip of ballpoint pen at the
guide groove and lift as shown in the
above illustration.
NOTICE
Do not bend the terminals.
2007 FJ CRUISER from Jan. ’06 Prod. (OM35857U)
15
TS12011
Side doors
z Be careful not to bend the electrode
when inserting the transmitter battery and that dust or oils do not
adhere to the transmitter case.
z Close the transmitter case securely.
TS12012
After replacing the battery, check that the
transmitter operates properly. If the transmitter still does not operate properly, contact your Toyota dealer.
3. Put in a new transmitter battery with
positive (+) side up.
Close the transmitter case securely.
NOTICE
z Make sure the positive side and
negative side of the transmitter battery are faced correctly.
z Do not replace the battery with wet
hands. Water may cause unexpected
rust.
z Do not touch or move any compo-
nents inside the transmitter, or it
may interfere with proper operation.
16
LOCKING AND UNLOCKING WITH KEY
Insert the key into the keyhole and turn
it.
To lock: Turn the key forward.
To unlock: Turn the key backward.
All the side doors and back door lock and
unlock simultaneously with either front
side door. In the driver’s door lock, turning the key once will unlock the driver’s
door and twice in succession will unlock
all the side doors and back door simultaneously.
2007 FJ CRUISER from Jan. ’06 Prod. (OM35857U)
This double key turning operation to unlock all the side doors and back door can
be changed to a single key turning operation. For details, contact your Toyota dealer.
When any of the side doors and back
door is unlocked with a key, the interior
light and luggage compartment light will
come on and remain on for about 15 seconds before fading out. (For details, see
“Interior light” on page 92 and “Luggage
compartment light” on page 93 in Section
1−5.)
TS12013
LOCKING AND UNLOCKING WITH
INSIDE LOCK KNOB
Move the lock knob.
To lock: Push the knob forward.
To unlock: Pull the knob backward.
The front doors can be opened by pulling
the inside handles even if the lock knobs
are in the locked position.
CAUTION
Do not pull the inside handle of the
front doors while driving. The doors
will open and an accident may occur.
Toyota strongly recommends that all
children be placed in the rear seat of
the vehicle.
Closing the door with the lock knob in the
lock position will also lock the door. Be
careful not to lock your keys in the vehicle.
The front doors cannot be locked if you
leave the key in the ignition switch.
2007 FJ CRUISER from Jan. ’06 Prod. (OM35857U)
17
Driver’s side
TS12014
Front passenger’s side
LOCKING AND UNLOCKING WITH
POWER DOOR LOCK SWITCH
Push the switch.
To lock: Push the switch down on the
front side.
To unlock: Push the switch down on the
rear side.
Operating the switch simultaneously locks
or unlocks all the side doors and back
door.
If you do either of the following, no side
door or back door can be unlocked with
the power door lock switch.
D Lock all the side doors and back door
with the key or wireless remote control
transmitter when all the side doors,
back door and back window are closed.
D Open the driver’s door or front passen-
ger’s door and move the inside lock
knobs of both front doors to the lock
position, then close the front doors.
The power door lock switch can be reset
in the following ways.
D Turn the ignition key to “ON”.
D Unlock all the side doors and back
door with the key or wireless remote
control transmitter.
D Unlock the driver’s door or front pas-
senger’s door with the inside lock
knob, and then unlock all the side
doors and back door with the power
door lock switch.
CAUTION
Before driving, be sure that the doors
are closed and locked, especially
when small children are in the vehicle. Along with the proper use of
seat belts, locking the doors helps
prevent the driver and passengers
from being thrown out from the vehicle in an accident. It also helps prevent the doors from being opened unintentionally.
18
2007 FJ CRUISER from Jan. ’06 Prod. (OM35857U)
Access doors
For easy access to the rear seat, open
the access door (rear door).
To open: First, open the front door widely.
Then pull (from the outside) or push (from
the inside) the inside handle of the access
door forward.
If you try to open the front and rear doors
simultaneously, they will not open.
To close: First, close the access door
completely. Then close the front door.
You can open and close the access door
only when the front door is widely opened.
TS12029a
TS12028a
NOTICE
The front door and access door could
be damaged if they hit each other
when being opened or closed. Be
sure to follow the above instructions.
2007 FJ CRUISER from Jan. ’06 Prod. (OM35857U)
CAUTION
When closing the access door, confirm safety of the area around. Keep
the hands, fingers and other parts of
the bodies of all occupants away
from the access door. Otherwise, the
closing door may cause serious injury.
19
Power windows
TS12015
OPERATING THE DRIVER’S WINDOW
Use the switch on the driver’s door.
Normal operation: The window moves as
long as you hold the switch.
To open: Lightly push down the switch.
To close: Pull up the switch.
TS12016
The windows can be operated with the
switch on either front door.
The power windows work when the ignition
switch is in the “ON” position.
Key off operation: If both front doors are
closed, all the power windows work for 43
seconds even after the ignition switch is
turned off. It stops working when either
front door is opened.
The indicator light (“AUTO”) on the switch
tells you the switch can be operated.
20
Automatic operation (to open only):
Push the switch completely down and then
release it. The window will fully open. To
stop the window partway, lightly pull the
switch up and then release it.
2007 FJ CRUISER from Jan. ’06 Prod. (OM35857U)
Loading...